Post here successfully Unlocked / Repaired / Flashed operations via NCK BOX/Dongle Premium v2

[maanarman]

Post here ONLY successfully Unlocked logs and Calculated Codes via NCK Dongle.

 

[maanarman]

Motorola Xt1771 Read FF With Nck Dongle

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : PreLoader USB VCOM Port (COM16)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 Using Algo 2.
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 3 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+24576Mb) SAMSUNG 0x524531424d42
 EMMC FW VERSION: 0d:00:00:00:00:00:00:00
 EMMC CID: 15010052453142 : 000000000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Preloader SEC version: 2
 Status: USB_HIGH_SPEED
 -Reading GPT Drive OK
 Build ID: NMA26.42-142
 Version: 7.1.1
 Build Date: Tue Jan 16 05:45:35 CST 2018
 Model: Moto E (4) Plus
 Brand: motorola
 Device: nicklaus
 Manufacturer: motorola
 Mediatek Version Release: alps-mp-n1.mp1-V1_lenovo6737m.35.n1_P105
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start procesing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000       
 Start procesing nvram
 IMEI[1] from NVRAM: 355633080378085
 IMEI[2] from NVRAM: 355633080444085
 Start procesing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000       
 Start procesing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000       
 Start procesing lk ......
 Start processing boot
 Start processing recovery
 Start procesing logo ......
 Start procesing secro
 Reading:  BEGIN: 0x5380000        - LEN: 0x600000       
 Start procesing trustzone
 Start procesing persist ......
 Reading:  BEGIN: 0x6b80000        - LEN: 0x3000000       
 Start procesing utags ......
 Reading:  BEGIN: 0x9c00000        - LEN: 0x80000         
 Start procesing frp ......
 Reading:  BEGIN: 0x9c80000        - LEN: 0x100000       
 Start procesing nvdata ......
 Reading:  BEGIN: 0x9d80000        - LEN: 0x2000000       
 Start procesing hw ......
 Reading:  BEGIN: 0xdd80000        - LEN: 0x800000       
 Start procesing oem ......
 Reading:  BEGIN: 0xe580000        - LEN: 0x10280000     
 Start procesing system
 Reading:  BEGIN: 0x1e800000       - LEN: 0xc0000000     
 Saved to : C:\Users\Hamza\Documents\Android_MTK\firmware_backup\MT6737M_EMMC_motorola_Moto E (4) Plus_7_1_1_alps-mp-n1_mp1-V1_lenovo6737m_35_n1_P105(2018_08_19_04_22)
 Wait untill phone will start charging.
 All done.

 

[maanarman]

Oale X2 Read FF Nck Dongle

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM64)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: F40122426977696E20 : 00000000000000
 EMMC UA SIZE: 0x1cd000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1cdc00000      [7.215 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM72)
 -Reading GPT Drive OK
 Build ID: LMY47I
 Display ID: LMY47I test-keys
 Version: 5.1
 Build Date: Tue Jun 27 19:40:23 CST 2017
 Model: gxq6580_weg_l
 Brand: alps
 Device: gxq6580_weg_l
 Manufacturer: alps
 Region: US
 Mediatek Version Release: ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 354741097582994
 IMEI[2] from NVRAM: 354741097583000
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000       
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000       
 Start processing lk ......
 Start processing boot
 Start processing recovery
 Start processing logo ......
 Start processing frp ......
 Reading:  BEGIN: 0x4fa0000        - LEN: 0x100000       
 Start processing nvdata ......
 Reading:  BEGIN: 0x50a0000        - LEN: 0x2000000       
 Start processing secro
 Reading:  BEGIN: 0x9a00000        - LEN: 0x600000       
 Start processing system
 Reading:  BEGIN: 0xa800000        - LEN: 0x60000000     
 Saved to : C:\Users\maanarman\Desktop\TEMP\Android_MTK\firmware_backup\MT6580_EMMC_alps_gxq6580_weg_l_5_1_ALPS_L1_MP6_V2_GXQ6580_WEG_L_P69(2018_08_16_23_24)
 Wait untill phone will start charging.
 All done.

 

[maanarman]

Logs

 Flash files count is :11
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6572
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+4096Mb) HYNIX 0x483447316404
 EMMC FW VERSION: 05:00:00:00:00:00:00:00
 EMMC CID: 90014A483447316404 : 00000000000000
 EMMC UA SIZE: 0xe9000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9c00000       [3.652 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader backup already exist, skip saving.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

 

[maanarman]

Logs

 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Selected model: ELBRUS
 Action: Reset FRP
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x385750443352
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 150100385750443352 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 -Reading GPT Drive OK
 Checking data, wait...
 
 Erasing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 All done.

 

[maanarman]

Logs

 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Selected model: ELBRUS
 Action: Read Pattern
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6572
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (28Gb+4096Mb) KSI 0x4d4d43303447
 EMMC FW VERSION: 58:00:00:00:00:00:00:00
 EMMC CID: 7001004D4D43303447 : 00000000000000
 EMMC UA SIZE: 0xe6800000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe6c20000       [3.606 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 **************************************
 1 2 3
 4 5 6
 7 8 9
 Pattern: 5869
 **************************************
 Pattern HEX: CAC4BA44CDFCA8E7FE68A3E61CBA893B43155B69
 **************************************
 Wait untill phone will start charging.
 All done.

 

[maanarman]

Factory Reset

Exe Version: NckDongle Qualcomm Module 0.12.1
Operation: Factory Format
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM59) detected.
Hello received.
HW ID: 00000000E1507000 MSM8916
PK HASH: CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F
Checking database for suitable loader.....
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
CPU: MSM8916
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 14.56 GB  Partitions count: 38
[0160B39F]Userdata Size: 11.02 GB
Manufacturer: OPPO
Cpu: arm64-v8a
Build Id: LMY47V
Model: A37f
Android Release: 5.1.1
Android Version: A37fEX_11_171008
Config: diag,serial_smd,rmnet_bam,adb
Security patch: 2017-09-01
Resetting cache , wait
Total blocks 10
Resetting userdata , wait
Total blocks 120
Factory reset done, wait untill phone start
This can take up to 5 min on slow phones.
Restarting phone.....
*************************************
Log saved: C:\Users\test\Documents\NckDongle\qc_module_Logs\reset_userdata_MSM8916_00000000E1507000_CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F12.txt
Total Time: 00:00:21
Done.

FRP Remove

Exe Version: NckDongle Qualcomm Module 0.12.1
Operation: Reset FRP
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM59) detected.
Hello received.
HW ID: 00000000E1507000 MSM8916
PK HASH: CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F
Checking database for suitable loader.....
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
CPU: MSM8916
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 14.56 GB  Partitions count: 38
[0160B39F]Userdata Size: 11.02 GB
Erasing FRP, wait.....
Erasing FRP, finished
Restarting phone.....
*************************************
Log saved: C:\Users\test\Documents\NckDongle\qc_module_Logs\reset_frp_MSM8916_00000000E1507000_CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F9.txt
Total Time: 00:00:06
Done.

 

[maanarman]

Logs

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM24)
 Boot mode: Preloader
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+16384Mb) SAMSUNG 0x514531334d42
 EMMC FW VERSION: 0d:00:00:00:00:00:00:00
 EMMC CID: 150100514531334D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM132)
 -Reading GPT Drive OK
 Build ID: MRA58K
 Display ID: X556-H371A-M-171025V173
 Version: 6.0
 Build Date: Wed Oct 25 02:35:04 CST 2017
 Brand: Infinix
 Model: Infinix HOT 4 Pro
 Device: X556
 Manufacturer: Infinix
 Mediatek Version Release: X556-H371A-M-171025V173
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 359842075197022
 IMEI[2] from NVRAM: 359842075197030
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000       
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000       
 Start processing lk ......
 Start processing boot
 Start processing recovery
 Start processing logo ......
 Start processing secro
 Reading:  BEGIN: 0x5200000        - LEN: 0x600000       
 Start processing trustzone
 Start processing frp ......
 Reading:  BEGIN: 0x6a00000        - LEN: 0x100000       
 Start processing nvdata ......
 Reading:  BEGIN: 0x6b00000        - LEN: 0x2000000       
 Start processing system
 Reading:  BEGIN: 0xb000000        - LEN: 0xd3800000     
 Saved to : C:\Users\maanarman\Desktop\TEMP\Android_MTK\firmware_backup\MT6737M_EMMC_Infinix_Infinix HOT 4 Pro_6_0_X556-H371A-M-171025V173(2018_08_21_14_44)
 Wait untill phone will start charging.
 All done.

 

[maanarman]

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6577
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) KSI 0x4d4d43303847
 EMMC FW VERSION: 03:00:00:00:00:00:00:00
 EMMC CID: 7001004D4D43303847 : 00000000000000
 EMMC UA SIZE: 0x1d5400000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d5820000      [7.336 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 Build ID: JZO54K
 Display ID: MD7062HC2W1.20131111
 Version: 4.1.2
 Build Date: Mon Nov 11 15:18:56 CST 2013
 Model: Q-Wave71N
 Manufacturer: alps
 Region: US
 Brand: alps

 Device: md706

 Manufacturer: alps

 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing PRELOADER ......
 Reading:  BEGIN: 0x0              - LEN: 0x40000         
 Start processing DSP_BL ......
 Start processing MBR
 Reading:  BEGIN: 0x880000         - LEN: 0x200           
 Start processing EBR1
 Reading:  BEGIN: 0x884000         - LEN: 0x200           
 [0]Start processing pmt
 Reading:  BEGIN: 0x888000         - LEN: 0x1000         
 Start processing nvram
 IMEI[1] from NVRAM: 860500025128230
 IMEI[2] from NVRAM: 860500025128248
 Start processing UBOOT ......
 Start processing BOOTIMG
 Start processing RECOVERY
 Start processing secro
 Reading:  BEGIN: 0x1e08000        - LEN: 0x600000       
 Start processing LOGO ......
 Start processing system
 Reading:  BEGIN: 0x2968000        - LEN: 0x30100000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6577_EMMC_alps__Q-Wave71N_4_1_2_2018_08_18_16_24)
 Wait untill phone will start charging.
 All done.

 

[maanarman]

Logs

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Phone detected...Please wait
 Using Algo 3.
 Helio MT6755 phone detected, swithing to helio api
 BBCHIP MT6755
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 70010045484143 : 000000000000000000
 EMMC UA SIZE: 0x3a5000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a5c00000      [14.590 GB]
 -Reading GPT Drive OK
 Build ID: NRD90M
 Version: 7.0
 Build Date: Thu Mar  8 17:00:00 CST 2018
 Brand: Meizu
 Manufacturer: Meizu
 Display ID: Flyme 6.3.0.2A
 Model: m3 note
 Device: m3note
 Mediatek Version Release: alps-mp-n0.mp7-V1.24_mz6755.66.n_P26
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing recovery
 Start processing custom.img
 Reading:  BEGIN: 0x1088000        - LEN: 0x20000000     
 Start processing frp ......
 Reading:  BEGIN: 0x21a88000       - LEN: 0x100000       
 Start processing nvdata ......
 Reading:  BEGIN: 0x21bc8000       - LEN: 0x2000000       
 Start processing proinfo
 Reading:  BEGIN: 0x23bc8000       - LEN: 0x700000       
 Start processing protect1 ......
 Reading:  BEGIN: 0x276c8000       - LEN: 0x800000       
 Start processing protect2 ......
 Reading:  BEGIN: 0x27ec8000       - LEN: 0x938000       
 Start processing md1img
 Start processing md1dsp
 Start processing md1arm7
 Start processing md3img
 Start processing nvram
 Start processing lk ......
 Start processing boot
 Partition: boot seems damaged, skip saving..
 Start processing logo ......
 Start processing trustzone
 Start processing secro
 Reading:  BEGIN: 0x2e500000       - LEN: 0x600000       
 Start processing devinfo ......
 Reading:  BEGIN: 0x2f800000       - LEN: 0x800000       
 Start processing system
 Reading:  BEGIN: 0x30000000       - LEN: 0xa0000000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6755_EMMC_Meizu_m3 note_7_0_alps-mp-n0_mp7-V1_24_mz6755_66_n_P26(2018_08_21_19_14)
 Wait untill phone will start charging.
 All done.

 

[maanarman]

Info

 Action : Boot Info.
 Selected 0-By CPU:ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM140)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6582
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+8192Mb) HYNIX 0x483447316404
 EMMC FW VERSION: 05:00:00:00:00:00:00:00
 EMMC CID: 90014A483447316404 : 00000000000000
 EMMC UA SIZE: 0xe9000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9c00000       [3.652 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM203)
 Build ID: KOT49H
 Display ID: ALPS.KK1.MP1.V2.10
 Version: 4.4.2
 Build Date: 2014年 12月 19日 星期五 14:28:22 CST
 Model: QMobile V2
 Brand: QMobile
 Device: QMobile V2
 Region: US
 Mediatek Version Release: ALPS.KK1.MP1.V2.10
 IMEI[1]: 358000060004742
 IMEI[2]: 358000065004747
 Wait untill phone will start charging.
 All done.

Wite FF

 Flash files count is :14
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM140)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6582
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+8192Mb) HYNIX 0x483447316404
 EMMC FW VERSION: 05:00:00:00:00:00:00:00
 EMMC CID: 90014A483447316404 : 00000000000000
 EMMC UA SIZE: 0xe9000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9c00000       [3.652 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM203)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader saved in firmware directory.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

 

[maanarman]

Qmobile X30 Write FF With Nck Dongle

Info

 Action : Boot Info.
 Selected 0-By CPU:ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM47)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6572
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+4096Mb) HYNIX 0x483447326111
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 90014A483447326111 : 00000000000000
 EMMC UA SIZE: 0xe9000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9c00000       [3.652 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 Build ID: KOT49H
 Display ID: ALPS.KK1.MP7.V1
 Version: 4.4.2
 Build Date: Tue Jul 14 15:33:47 CST 2015
 Model: QMobile X30
 Brand: TINNO
 Device: QMobile X30
 Region: US
 Mediatek Version Release: ALPS.KK1.MP7.V1
 IMEI[1]: 352328071542129
 IMEI[2]: 352328076542124
 Wait untill phone will start charging.
 All done.

Write FF

 Flash files count is :12
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM47)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6572
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+4096Mb) HYNIX 0x483447326111
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 90014A483447326111 : 00000000000000
 EMMC UA SIZE: 0xe9000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9c00000       [3.652 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader backup already exist, skip saving.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

 

[maanarman]

Logs

 Action : Reset to factory default.
 Selected Model: 0-By CPU:ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Scanning for presents meta ports...
 Phone must be off with battery inside.
 Please insert USB cable now...
 In some phones need to keep VOL- button untill inserting USB cable.
 [6]Detected: MTK USB Port (COM6)
 \\?\usb#vid_0e8d&pid_0003#6&39fc866b&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
 Starting META mode, wait...
 Restarting to meta,wait....
 If drivers missing, please install CDC drivers.
 This can take up to 5 min on slow phones.
 If take too long, check device manager for drivers.
 [273]META Port Detected: Preloader And Gadget Serial (COM273)
 USB\VID_22D9&PID_0006\6&39FC866B&0&2
 Start sync target, waiting responce.....
 ChipID: MT6763,S01
 Using Algo 3.
 Resetting phone step 1, wait....
 Resetting phone step 2, wait....
 ClearValue ok.
 FormatTCard ok.
 All done.

 

[maanarman]

Logs

 Flash files count is :16
 Action : Firmware update.
 Selected Model: Nokia: Nokia 3
 Exe version: NCKDongle AndroidMTK 2.5.8.9
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM68)
 Boot mode: Preloader
 Using Algo 2.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (117Gb+16384Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: 13014E51324A393652 : 00000000000000
 EMMC UA SIZE: 0x3ab400000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3ac000000      [14.688 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM136)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader saved in firmware directory.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

 

[maanarman]

Logs

 Flash files count is :9
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.8.9
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM24)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: F40122426977696E20 : 00000000000000
 EMMC UA SIZE: 0x1cd000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1cdc00000      [7.215 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM132)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader backup already exist, skip saving.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

 

[maanarman]

Logs

 Exe version: NCKDongle AndroidMTK 2.5.8.9
 Selected model: ELBRUS
 Action: Reset FRP
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM24)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (117Gb+16384Mb) HYNIX 0x484147326505
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 90014A484147326505 : 00000000000000
 EMMC UA SIZE: 0x3ab800000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3ac400000      [14.691 GB]
 -Reading GPT Drive OK
 Checking data, wait...
 
 Erasing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 All done.

 

[maanarman]

Logs

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6572
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+4096Mb) SAMSUNG 0x4e35575a4d42
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 1501004E35575A4D42 : 00000000000000
 EMMC UA SIZE: 0xe9000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9480000       [3.645 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 Build ID: JDQ39
 Display ID: ALPS.JB3.MP.V1
 Version: 4.2.2
 Build Date: Thu Aug 28 19:45:06 CST 2014
 Model: td710
 Brand: alps
 Device: td710
 Manufacturer: alps
 Region: FR
 Mediatek Version Release: ALPS.JB3.MP.V1
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing PRELOADER ......
 Reading:  BEGIN: 0x0              - LEN: 0xc00000       
 Start processing MBR
 Reading:  BEGIN: 0xc00000         - LEN: 0x200           
 Start processing EBR1
 Reading:  BEGIN: 0xc80000         - LEN: 0x200           
 Start processing proinfo
 Reading:  BEGIN: 0xd00000         - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 356375060079262
 IMEI[2] from NVRAM: 356375060079270
 Start processing PROTECT_F
 Reading:  BEGIN: 0x1500000        - LEN: 0xa00000       
 Start processing PROTECT_S
 Reading:  BEGIN: 0x1f00000        - LEN: 0xa00000       
 Start processing UBOOT ......
 Start processing BOOTIMG
 Start processing RECOVERY
 Start processing secro
 Reading:  BEGIN: 0x3580000        - LEN: 0x40000         
 Start processing LOGO ......
 Start processing EBR2
 Reading:  BEGIN: 0x3940000        - LEN: 0x200           
 Start processing custom.img
 Reading:  BEGIN: 0x39c0000        - LEN: 0x12c00000     
 Start processing system
 Reading:  BEGIN: 0x16fc0000       - LEN: 0x22600000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6572_EMMC_alps_td710_4_2_2_ALPS_JB3_MP_V1(2018_08_29_19_43)
 Wait untill phone will start charging.
 All done.

 

[maanarman]

Motorola Xt1771 Hang on black Display Done With Nck Dongle

Action : Boot Info.
 Selected Motorola:XT1771
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 3 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+24576Mb) SAMSUNG 0x524531424d42
 EMMC FW VERSION: 0d:00:00:00:00:00:00:00
 EMMC CID: 150100524531424D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 -Reading GPT Drive OK
 This phone have FRP partition.
 Build ID: NMA26.42-11-3
 Version: 7.1.1
 Build Date: Sat May  6 04:42:45 CDT 2017
 Model: Moto E (4) Plus
 Brand: motorola
 Device: nicklaus
 Mediatek Version Release: alps-mp-n1.mp1-V1_lenovo6737m.35.n1_P42
 Wait untill phone will start charging.
 All done.

 Action : Format UserData.
 Selected Motorola:XT1771
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 3 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+24576Mb) SAMSUNG 0x524531424d42
 EMMC FW VERSION: 0d:00:00:00:00:00:00:00
 EMMC CID: 150100524531424D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 -Reading GPT Drive OK
 Detecting format adress....wait!
 Starting generic userdata format...!
 Partition: cache  begin: 0xde800000        length: 0x19000000     
 Partition: userdata  begin: 0xf7800000        length: 0x2a8a80000     
 Phone can start slow at first power on
 If phone stuck on logo, perform wipe from recovery.
 First start can take up to 5 min on some phones.
 Wait untill phone will start charging.
 All done.

 

[maanarman]

Logs

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6582
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) HYNIX 0x483847326404
 EMMC FW VERSION: 05:00:00:00:00:00:00:00
 EMMC CID: 90014A483847326404 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 Build ID: KOT49H
 Display ID: A3300HV_A442_01_25_150620_ROW
 Version: 4.4.2
 Build Date: Sat Jun 20 11:59:55 CST 2015
 Model: LenovoA3300-HV
 Brand: Lenovo
 Device: A3300-HV
 Manufacturer: LENOVO
 Mediatek Version Release: A3300HV_A442_01_25_150620_ROW
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing PRELOADER ......
 Reading:  BEGIN: 0x0              - LEN: 0x1400000       
 Start processing MBR
 Reading:  BEGIN: 0x1400000        - LEN: 0x200           
 Start processing EBR1
 Reading:  BEGIN: 0x1480000        - LEN: 0x200           
 Start processing proinfo
 Reading:  BEGIN: 0x1500000        - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 866147029768332
 IMEI[2] from NVRAM: 866147029768332
 Start processing PROTECT_F
 Reading:  BEGIN: 0x1d00000        - LEN: 0xa00000       
 Start processing PROTECT_S
 Reading:  BEGIN: 0x2700000        - LEN: 0xa00000       
 Start processing UBOOT ......
 Start processing BOOTIMG
 Start processing RECOVERY
 Start processing secro
 Reading:  BEGIN: 0x5180000        - LEN: 0x600000       
 Start processing LOGO ......
 Start processing system
 Reading:  BEGIN: 0x6500000        - LEN: 0x4c800000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6582_EMMC_Lenovo_LenovoA3300-HV_4_4_2_A3300HV_A442_01_25_150620_ROW(2018_08_29_16_56)
 Wait untill phone will start charging.
 All done.

 

[maanarman]

LOGS

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x385750443352
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 150100385750443352 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 -Reading GPT Drive OK
 Build ID: MRA58K
 Display ID: WF581U.BP244.LX.V2.0.20170103
 Version: 6.0
 Build Date: Tue Jan  3 13:19:10 CST 2017
 Model: i 3
 Brand: kimfly
 Device: i3
 Manufacturer: kimfly
 Mediatek Version Release: alps-mp-m0.mp1-V2.34_droi6580.we.m_P41
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 352886080640945
 IMEI[2] from NVRAM: 352886080640952
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000       
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000       
 Start processing lk ......
 Start processing boot
 Start processing recovery
 Start processing logo ......
 Start processing frp ......
 Reading:  BEGIN: 0x4fa0000        - LEN: 0x100000       
 Start processing nvdata ......
 Reading:  BEGIN: 0x50a0000        - LEN: 0x2000000       
 Start processing secro
 Reading:  BEGIN: 0x9a00000        - LEN: 0x600000       
 Start processing system
 Reading:  BEGIN: 0xa800000        - LEN: 0xc0000000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6580_EMMC_kimfly_i 3_6_0_alps-mp-m0_mp1-V2_34_droi6580_we_m_P41(2018_08_25_15_50)
 Wait untill phone will start charging.
 All done.