Lenovo A328 MT6582 Unfortunately Android.System Has Stopped Solved
Post here successfully Unlocked / Repaired / Flashed operations via NCK BOX/Dongle Premium v2
- Thread starter Forum Supporter
- Start date
- Status
Lenovo A328 MT6582 Unfortunately Android.System Has Stopped Solved
Shahzad Qadri
Friend's Martview
Huawei Y3II LUA-U22 One Click Frp Reset
Last edited:
Shahzad Qadri
Friend's Martview
Shahzad Qadri
Friend's Martview
maanarman
Friend's Martview
INFO
FRP Remove
Code:
Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.5.9.0
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM10)
Boot mode: Preloader
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (55Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 10:00:00:00:00:00:00:00
EMMC CID: A80111303546484D42 : 00000000000000
EMMC UA SIZE: 0x1bb400000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1bb820000 [6.930 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM Port (COM26)
-Reading GPT Drive OK
This phone have FRP partition.
Build ID: LMY47I
Display ID: i.onik_i544_L7_HW02_V02_20160115
Version: 5.1
Build Date: 2016年 01月 16日 星期六 15:27:22 CST
Model: i544
Brand: i.onik
Device: i544
Region: US
Mediatek Version Release: ALPS.L1.MP6.V2_ALONG6580.WE.L_P13
IMEI[1]: 357787070054284
IMEI[2]: 357787070054292
Wait untill phone will start charging.
All done.FRP Remove
Code:
Exe version: NCKDongle AndroidMTK 2.5.9.0
Selected model: ELBRUS
Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM10)
Boot mode: Preloader
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (55Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 10:00:00:00:00:00:00:00
EMMC CID: A80111303546484D42 : 00000000000000
EMMC UA SIZE: 0x1bb400000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1bb820000 [6.930 GB]
-Reading GPT Drive OK
Checking data, wait...
Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.maanarman
Friend's Martview
Logs
Code:
Flash files count is :8
Action : Firmware update.
Selected Model: 0-By CPU: ELBRUS
Exe version: NCKDongle AndroidMTK 2.5.8.9
Scenario: [0]Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM24)
Boot mode: Preloader
Using Algo 1.
Scatter file loaded, not need emmi.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 10:00:00:00:00:00:00:00
EMMC CID: F40122426977696E20 : 00000000000000
EMMC UA SIZE: 0x1cd000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1cdc00000 [7.215 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM132)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Preloader backup already exist, skip saving.
Starting flash.
Download firmware to flash now...
Wait untill phone will start charging.
All done.maanarman
Friend's Martview
INFO
READ FF
Code:
Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.5.9.0
Will be used loader: tecno k8 da.bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM10)
Boot mode: Preloader
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x514536334d42
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 150100514536334D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM Port (COM26)
-Reading GPT Drive OK
This phone have FRP partition.
Build ID: NRD90M
Display ID: K8-H3722ABCDE-N-171127V77
Version: 7.0
Build Date: Mon Nov 27 12:35:57 CST 2017
Model: TECNO K8
Brand: TECNO
Device: TECNO-K8
Mediatek Version Release: K8-H3722ABCDE-N-171127V77
IMEI[1]: 353614091671165
IMEI[2]: 353614091671173
Wait untill phone will start charging.
All done.READ FF
Code:
Will be used loader: tecno k8 da.bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM10)
Boot mode: Preloader
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x514536334d42
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 150100514536334D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM Port (COM26)
-Reading GPT Drive OK
Build ID: NRD90M
Display ID: K8-H3722ABCDE-N-171127V77
Version: 7.0
Build Date: Mon Nov 27 12:35:57 CST 2017
Model: TECNO K8
Brand: TECNO
Device: TECNO-K8
Manufacturer: TECNO
Mediatek Version Release: K8-H3722ABCDE-N-171127V77
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 353614091671165
IMEI[2] from NVRAM: 353614091671173
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk ......
Start processing boot
Start processing recovery
Start processing logo ......
Start processing secro
Reading: BEGIN: 0x5200000 - LEN: 0x600000
Start processing trustzone
Start processing frp ......
Reading: BEGIN: 0x6a00000 - LEN: 0x100000
Start processing nvdata ......
Reading: BEGIN: 0x6b00000 - LEN: 0x2000000
Start processing system
Reading: BEGIN: 0xb000000 - LEN: 0x100000000
Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6737M_EMMC_TECNO_TECNO K8_7_0_K8-H3722ABCDE-N-171127V77(2018_07_24_17_51)
Wait untill phone will start charging.
All done.maanarman
Friend's Martview
Logs
Code:
Exe version: NCKDongle AndroidMTK 2.5.9.0
Selected model: ELBRUS
Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM10)
Boot mode: Preloader
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (114Gb+16384Mb) KSI 0x454841434541
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 700100454841434541 : 00000000000000
EMMC UA SIZE: 0x390000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x390c00000 [14.262 GB]
-Reading GPT Drive OK
Checking data, wait...
Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.maanarman
Friend's Martview
Logs
Code:
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM10)
Boot mode: Preloader
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) SAMSUNG 0x4e355530304d
EMMC FW VERSION: 02:00:00:00:00:00:00:00
EMMC CID: 1501004E355530304D : 00000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9420000 [3.645 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM Port (COM26)
Build ID: JDQ39
Display ID: J7209_6.0.1_V1.8
Version: 4.2.2
Build Date: Mon Nov 21 16:13:59 CST 2016
Model: SM-J800FN
Brand: Samsung
Device: j7209
Manufacturer: Samsung
Region: US
Mediatek Version Release: J7209_6.0.1_V1.8 20161121-1613
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing PRELOADER ......
Reading: BEGIN: 0x0 - LEN: 0x1400000
Start processing MBR
Reading: BEGIN: 0x1400000 - LEN: 0x200
Start processing EBR1
Reading: BEGIN: 0x1480000 - LEN: 0x200
Start processing proinfo
Reading: BEGIN: 0x1500000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 359891060939526
IMEI[2] from NVRAM: 359892060939524
Start processing PROTECT_F
Reading: BEGIN: 0x1d00000 - LEN: 0xa00000
Start processing PROTECT_S
Reading: BEGIN: 0x2700000 - LEN: 0xa00000
Start processing UBOOT ......
Start processing BOOTIMG
Start processing RECOVERY
Start processing secro
Reading: BEGIN: 0x3f80000 - LEN: 0x40000
Start processing LOGO ......
Start processing system
Reading: BEGIN: 0x4d40000 - LEN: 0x28000000
Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6572_EMMC_Samsung_SM-J800FN_4_2_2_J7209_6_0_1_V1_8 20161121-1613(2018_07_28_16_06)
Wait untill phone will start charging.
All done.maanarman
Friend's Martview
Info
Write Flash
Code:
Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.5.9.0
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM10)
Boot mode: Preloader
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447326111
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 90014A483447326111 : 00000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM Port (COM26)
Build ID: KOT49H
Display ID: GFIVE President Smart 2_a_20150415-171526
Version: 4.4.2
Build Date: Wed Apr 15 17:15:26 CST 2015
Model: GFIVE President Smart 2
Brand: GFIVE
Device: Smart_1
Region: US
Mediatek Version Release: ALPS.KK1.MP7.V1
IMEI[1]: 866033024058814
IMEI[2]: 866033024111316
Wait untill phone will start charging.
All done.Write Flash
Code:
Flash files count is :8
Action : Firmware update.
Selected Model: 0-By CPU: ELBRUS
Exe version: NCKDongle AndroidMTK 2.5.9.0
Scenario: [0]Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM10)
Boot mode: Preloader
Using Algo 1.
Scatter file loaded, not need emmi.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447326111
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 90014A483447326111 : 00000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM Port (COM26)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Preloader backup already exist, skip saving.
Starting flash.
Download firmware to flash now...
Wait untill phone will start charging.
All done.- Status