Post here successfully Unlocked / Repaired / Flashed operations via NCK BOX/Dongle Premium v2

[maanarman]

Info

 Action : Boot Info.
 Selected OPPO:A83
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Keep VOL- button untill inserting USB cable.
 Detected : MTK USB Port (COM6)
 Boot mode: Brom
 Phone detected...Please wait
 Using Algo 3.
 Helio MT6763 phone detected, swithing to helio api
 Loading Custom Preloader
 BBCHIP MT6763
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 15010047443642 : 000000000000000000
 EMMC UA SIZE: 0x747c00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x748800000      [29.133 GB]
 -Reading GPT Drive OK
 This phone have FRP partition.
 Build ID: N6F26Q
 Version: 7.1.1
 Build Date: Mon May 14 00:19:11 CST 2018
 Mediatek Version Release: A83js_11_A.14_180513
 Model: OPPO A83js
 Brand: OPPO
 Device: M6763D
 Display ID: A83jsEX_11_A.14_180513
 [3]OPPO IMEI: 867611034993911
 SN: LBS8QCHMHA9LOJYH
 Wait untill phone will start charging.
 All done.

Factory Reset

 Action : Format UserData.
 Selected OPPO:A83
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Keep VOL- button untill inserting USB cable.
 Detected : MTK USB Port (COM6)
 Boot mode: Brom
 Phone detected...Please wait
 Using Algo 3.
 Helio MT6763 phone detected, swithing to helio api
 Loading Custom Preloader
 BBCHIP MT6763
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 15010047443642 : 000000000000000000
 EMMC UA SIZE: 0x747c00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x748800000      [29.133 GB]
 -Reading GPT Drive OK
 Detecting format adress....wait!
 Starting generic userdata format...!
 Partition: cache  begin: 0x160800000       length: 0x10000000     
 Partition: userdata  begin: 0x170800000       length: 0x5d63fbe00     
 Phone can start slow at first power on
 If phone stuck on logo, perform wipe from recovery.
 First start can take up to 5 min on some phones.
 Wait untill phone will start charging.
 All done.

FRP Remove

 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Selected model: A83
 Action: Reset FRP
 Reinsert phone battery.
 Battery must be charged.
 Keep VOL- button untill inserting USB cable.
 Detected : MTK USB Port (COM6)
 Boot mode: Brom
 Phone detected...Please wait
 Using Algo 3.
 Helio MT6763 phone detected, swithing to helio api
 Loading Custom Preloader
 BBCHIP MT6763
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 15010047443642 : 000000000000000000
 EMMC UA SIZE: 0x747c00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x748800000      [29.133 GB]
 -Reading GPT Drive OK
 Starting helio frp, not disconnect phone untill done
 [0]FRP Reset Done.
 [2]FRP Reset Done.
 All done.

 

[maanarman]

Logs

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (114Gb+16384Mb) KSI 0x454841434541
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 700100454841434541 : 00000000000000
 EMMC UA SIZE: 0x390000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x390c00000      [14.262 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 -Reading GPT Drive OK
 Build ID: NRD90M
 Display ID: VGOTEL_VENTURE_12_V06
 Version: 7.0
 Build Date: Fri Jul 14 12:49:06 CST 2017
 Model: Venture V12
 Brand: VGOTEL
 Device: Venture_V12
 Manufacturer: VGOTEL
 Region: US
 Mediatek Version Release: alps-mp-n0.mp1-V1.0.2_vs6737m.35.n_P37
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 352746090113228
 IMEI[2] from NVRAM: 352746090113236
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000       
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000       
 Start processing lk ......
 Start processing boot
 Start processing recovery
 Start processing logo ......
 Start processing secro
 Reading:  BEGIN: 0x5200000        - LEN: 0x600000       
 Start processing trustzone
 Start processing frp ......
 Reading:  BEGIN: 0x6a00000        - LEN: 0x100000       
 Start processing nvdata ......
 Reading:  BEGIN: 0x6b00000        - LEN: 0x2000000       
 Start processing system
 Reading:  BEGIN: 0xb000000        - LEN: 0xc0000000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6737M_EMMC_VGOTEL_Venture V12_7_0_alps-mp-n0_mp1-V1_0_2_vs6737m_35_n_P37(2018_08_13_14_55)
 Wait untill phone will start charging.
 All done.

 

[maanarman]

Info

 Action : Boot Info.
 Selected Qmobile:QMobile I6 metal
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x464e58324d42
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 150100464E58324D42 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 -Reading GPT Drive OK
 This phone have FRP partition.
 Build ID: NRD90M
 Display ID: alps-mp-n0.mp2-V1_tinno6580.we.n_P89
 Version: 7.0
 Build Date: Thu Jul 13 13:29:36 CST 2017
 Mediatek Version Release: alps-mp-n0.mp2-V1_tinno6580.we.n_P89
 Model: QMobile i6 Metal 2017
 Brand: QMobile
 Device: i6_Metal_2017
 IMEI[1]: 359520080472172
 IMEI[2]: 359520085472177
 Wait untill phone will start charging.
 All done.

FRP Remove

 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Selected model: QMobile I6 metal
 Action: Reset FRP
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x464e58324d42
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 150100464E58324D42 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 -Reading GPT Drive OK
 Checking data, wait...
 
 Erasing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 All done.

 

[maanarman]

Info

 Action : Boot Info.
 Selected 0-By CPU:ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 90014A483847316505 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 -Reading GPT Drive OK
 This phone have FRP partition.
 Build ID: MRA58K
 Display ID: MRA58K release-keys
 Version: 6.0
 Build Date: Sun Apr 24 01:40:08 CST 2016
 Model: QMobile i6 Metal ONE
 Brand: QMobile
 Device: i6_Metal_ONE
 Mediatek Version Release: ALPS.W10.24.p0
 IMEI[1]: 358767070220506
 IMEI[2]: 358767075220501
 Wait untill phone will start charging.
 All done.

FRP Remove

 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Selected model: ELBRUS
 Action: Reset FRP
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 90014A483847316505 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 -Reading GPT Drive OK
 Checking data, wait...
 
 Erasing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 All done.

 

[maanarman]

Logs

 Flash files count is :13
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.8.9
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM70)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6589
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (28Gb+8192Mb) HYNIX 0x2058494e5948
 EMMC FW VERSION: 16:00:00:00:00:00:00:00
 EMMC CID: 90014A2058494E5948 : 00000000000000
 EMMC UA SIZE: 0xe7000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe7600000       [3.615 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM17)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader saved in firmware directory.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

 

[maanarman]

Info

 Action : Boot Info.
 Selected 0-By CPU:ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6753
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 3 GB  DRAM
 ----------------------------------------------------
 EMMC: (233Gb+24576Mb) SAMSUNG 0x525831424d42
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 150100525831424D42 : 00000000000000
 EMMC UA SIZE: 0x747c00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x748800000      [29.133 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 -Reading GPT Drive OK
 This phone have FRP partition.
 Build Date: Sun Aug  7 21:57:00 CST 2016
 Display ID: Z12_PRO
 Build ID: MRA58K
 Version: 6.0
 Mediatek Version Release: WBL7519QM_0401_T5820
 Brand: QMobile
 Device: Z12_PRO
 Model: Z12 PRO
 Partition is damaged or encripted.
 IMEI[1]: 352836080164925
 IMEI[2]: 352836085164920
 Wait untill phone will start charging.
 All done.

Write FF

 Flash files count is :12
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 2.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6753
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 3 GB  DRAM
 ----------------------------------------------------
 EMMC: (233Gb+24576Mb) SAMSUNG 0x525831424d42
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 150100525831424D42 : 00000000000000
 EMMC UA SIZE: 0x747c00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x748800000      [29.133 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader saved in firmware directory.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

 

[Jankovic]

BR
Mario Jankovic

 

[maanarman]

Logs

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 90014A483847316505 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 -Reading GPT Drive OK
 Build ID: MRA58K
 Display ID: MRA58K release-keys
 Version: 6.0
 Build Date: Tue Nov 29 12:12:16 CST 2016
 Model: QMobile X700 PRO Lite
 Brand: QMobile
 Device: X700_PRO_Lite
 Manufacturer: QMobile
 Mediatek Version Release: ALPS.W10.24.p0
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 355554081061480
 IMEI[2] from NVRAM: 355554086061485
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000       
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000       
 Start processing lk ......
 Start processing boot
 Start processing recovery
 Start processing logo ......
 Start processing frp ......
 Reading:  BEGIN: 0x4fa0000        - LEN: 0x100000       
 Start processing nvdata ......
 Reading:  BEGIN: 0x50a0000        - LEN: 0x2000000       
 Start processing secro
 Reading:  BEGIN: 0x9a00000        - LEN: 0x600000       
 Start processing system
 Reading:  BEGIN: 0xa800000        - LEN: 0xb3800000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6580_EMMC_QMobile_QMobile X700 PRO Lite_6_0_ALPS_W10_24_p0(2018_08_16_16_11)
 Wait untill phone will start charging.
 All done.

 

[maanarman]

Info

 Action : Boot Info.
 Selected 0-By CPU:ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6582
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (28Gb+4096Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 23:00:00:00:00:00:00:00
 EMMC CID: 8801034E4361726420 : 00000000000000
 EMMC UA SIZE: 0xe7400000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe7820000       [3.617 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 Build ID: KOT49H
 Display ID: QTab_Q150_MP_02_02_V10.0
 Version: 4.4.2
 Build Date: Mon Feb  2 22:44:07 CST 2015
 Model: QTab Q150
 Brand: QTab
 Device: QTab_Q150
 Region: US
 Mediatek Version Release: ALPS.KK1.MP1.V2.11
 IMEI[1]: 359347060007970
 IMEI[2]: 359347065007975
 Wait untill phone will start charging.
 All done.

Write FF

 Flash files count is :13
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6582
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (28Gb+4096Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 23:00:00:00:00:00:00:00
 EMMC CID: 8801034E4361726420 : 00000000000000
 EMMC UA SIZE: 0xe7400000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe7820000       [3.617 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader saved in firmware directory.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

 

[maanarman]

Logs

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 3 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+24576Mb) SAMSUNG 0x524531424d42
 EMMC FW VERSION: 0d:00:00:00:00:00:00:00
 EMMC CID: 150100524531424D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 -Reading GPT Drive OK
 Build ID: NMA26.42-142
 Version: 7.1.1
 Build Date: Tue Jan 16 05:45:35 CST 2018
 Model: Moto E (4) Plus
 Brand: motorola
 Device: nicklaus
 Manufacturer: motorola
 Mediatek Version Release: alps-mp-n1.mp1-V1_lenovo6737m.35.n1_P105
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 359556082179530
 IMEI[2] from NVRAM: 359556082179548
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000       
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000       
 Start processing lk ......
 Start processing boot
 Start processing recovery
 Start processing logo ......
 Start processing secro
 Reading:  BEGIN: 0x5380000        - LEN: 0x600000       
 Start processing trustzone
 Start processing persist ......
 Reading:  BEGIN: 0x6b80000        - LEN: 0x3000000       
 Start processing utags ......
 Reading:  BEGIN: 0x9c00000        - LEN: 0x80000         
 Start processing frp ......
 Reading:  BEGIN: 0x9c80000        - LEN: 0x100000       
 Start processing nvdata ......
 Reading:  BEGIN: 0x9d80000        - LEN: 0x2000000       
 Start processing hw ......
 Reading:  BEGIN: 0xdd80000        - LEN: 0x800000       
 Start processing oem ......
 Reading:  BEGIN: 0xe580000        - LEN: 0x10280000     
 Start processing system
 Reading:  BEGIN: 0x1e800000       - LEN: 0xc0000000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6737M_EMMC_motorola_Moto E (4) Plus_7_1_1_alps-mp-n1_mp1-V1_lenovo6737m_35_n1_P105(2018_08_09_20_07)
 Wait untill phone will start charging.
 All done.

 

[maanarman]

Logs

 Flash files count is :9
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+16384Mb) SAMSUNG 0x523832314d42
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 150100523832314D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader saved in firmware directory.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

 

[maanarman]

Logs

 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Selected model: ELBRUS
 Action: Reset FRP
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+16384Mb) SAMSUNG 0x513832334d42
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 150100513832334D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 -Reading GPT Drive OK
 Checking data, wait...
 
 Erasing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 All done.

 

[maanarman]

logs

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM64)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: F40122426977696E20 : 00000000000000
 EMMC UA SIZE: 0x1cd000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1cdc00000      [7.215 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM72)
 -Reading GPT Drive OK
 Build ID: LMY47I
 Display ID: Z6U190HFB_YT_V007En
 Version: 5.1
 Build Date: Wed Jul 19 13:16:38 CST 2017
 Model: gxq6580_weg_l
 Brand: alps
 Device: gxq6580_weg_l
 Manufacturer: alps
 Region: US
 Mediatek Version Release: ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 354741100486076
 IMEI[2] from NVRAM: 354741100486084
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000       
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000       
 Start processing lk ......
 Start processing boot
 Start processing recovery
 Start processing logo ......
 Start processing frp ......
 Reading:  BEGIN: 0x4fa0000        - LEN: 0x100000       
 Start processing nvdata ......
 Reading:  BEGIN: 0x50a0000        - LEN: 0x2000000       
 Start processing secro
 Reading:  BEGIN: 0x9a00000        - LEN: 0x600000       
 Start processing system
 Reading:  BEGIN: 0xa800000        - LEN: 0x60000000     
 Saved to : C:\Users\maanarman\Desktop\TEMP\Android_MTK\firmware_backup\MT6580_EMMC_alps_gxq6580_weg_l_5_1_ALPS_L1_MP6_V2_GXQ6580_WEG_L_P69(2018_08_11_16_54)
 Wait untill phone will start charging.
 All done.

 

[maanarman]

info

 Action : Boot Info.
 Selected 0-By CPU:ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+16384Mb) SAMSUNG 0x514531334d42
 EMMC FW VERSION: 0d:00:00:00:00:00:00:00
 EMMC CID: 150100514531334D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 -Reading GPT Drive OK
 This phone have FRP partition.
 Build ID: NRD90M
 Display ID: X557-H807AD-N-170626V86
 Version: 7.0
 Build Date: Mon Jun 26 18:43:47 CST 2017
 Model: Infinix HOT 4
 Brand: Infinix
 Device: X557
 Mediatek Version Release: X557-H807AD-N-170626V86
 IMEI[1]: 355426085047528
 IMEI[2]: 355426085047536
 Wait untill phone will start charging.
 All done.

frp remove

 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Selected model: ELBRUS
 Action: Reset FRP
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+16384Mb) SAMSUNG 0x514531334d42
 EMMC FW VERSION: 0d:00:00:00:00:00:00:00
 EMMC CID: 150100514531334D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 -Reading GPT Drive OK
 Checking data, wait...
 
 Erasing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 All done.

 

[maanarman]

info

 Action : Boot Info.
 Selected Motorola:XT1771
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 3 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+24576Mb) SAMSUNG 0x524531424d42
 EMMC FW VERSION: 0d:00:00:00:00:00:00:00
 EMMC CID: 150100524531424D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 -Reading GPT Drive OK
 This phone have FRP partition.
 Build ID: NMA26.42-11-3
 Version: 7.1.1
 Build Date: Sat May  6 04:42:45 CDT 2017
 Model: Moto E (4) Plus
 Brand: motorola
 Device: nicklaus
 Mediatek Version Release: alps-mp-n1.mp1-V1_lenovo6737m.35.n1_P42
 Wait untill phone will start charging.
 All done.

read ff

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 3 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+24576Mb) SAMSUNG 0x524531424d42
 EMMC FW VERSION: 0d:00:00:00:00:00:00:00
 EMMC CID: 150100524531424D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 -Reading GPT Drive OK
 Build ID: NMA26.42-11-3
 Version: 7.1.1
 Build Date: Sat May  6 04:42:45 CDT 2017
 Model: Moto E (4) Plus
 Brand: motorola
 Device: nicklaus
 Manufacturer: motorola
 Mediatek Version Release: alps-mp-n1.mp1-V1_lenovo6737m.35.n1_P42
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 355633085113297
 IMEI[2] from NVRAM: 355633085208295
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000       
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000       
 Start processing lk ......
 Start processing boot
 Start processing recovery
 Start processing logo ......
 Start processing secro
 Reading:  BEGIN: 0x5380000        - LEN: 0x600000       
 Start processing trustzone
 Start processing persist ......
 Reading:  BEGIN: 0x6b80000        - LEN: 0x3000000       
 Start processing utags ......
 Reading:  BEGIN: 0x9c00000        - LEN: 0x80000         
 Start processing frp ......
 Reading:  BEGIN: 0x9c80000        - LEN: 0x100000       
 Start processing nvdata ......
 Reading:  BEGIN: 0x9d80000        - LEN: 0x2000000       
 Start processing hw ......
 Reading:  BEGIN: 0xdd80000        - LEN: 0x800000       
 Start processing oem ......
 Reading:  BEGIN: 0xe580000        - LEN: 0x10280000     
 Start processing system
 Reading:  BEGIN: 0x1e800000       - LEN: 0xc0000000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6737M_EMMC_motorola_Moto E (4) Plus_7_1_1_alps-mp-n1_mp1-V1_lenovo6737m_35_n1_P42(2018_08_19_15_20)
 Wait untill phone will start charging.
 All done.

 

[maanarman]

Info

Action : Boot Info.
 Selected 0-By CPU:ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6582
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x38574d423352
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 15010038574D423352 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 Build ID: JDQ39
 Display ID: QTabQ300_MP_04-28-14
 Version: 4.2.2
 Build Date: Mon May 12 20:00:45 CST 2014
 Model: QTab Q300
 Brand: QTab
 Device: reallytek82_tb_jb5
 Region: US
 Mediatek Version Release: QTabQ300_MP_04-28-14
 IMEI[1]: 352863060377863
 IMEI[2]: 352863065377868
 Wait untill phone will start charging.
 All done.

Write FF

 Flash files count is :13
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6582
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x38574d423352
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 15010038574D423352 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader saved in firmware directory.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

 

[maanarman]

Info

 Action : Boot Info.
 Selected OPPO:A71
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Keep VOL+ and VOL- button untill inserting USB cable.
 Detected : MTK USB Port (COM6)
 Boot mode: Brom
 Phone detected...Please wait
 Using Algo 3.
 Helio MT6755 phone detected, swithing to helio api
 Loading Custom Preloader
 BBCHIP MT6755
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 15010047453642 : 000000000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 -Reading GPT Drive OK
 This phone have FRP partition.
 Build ID: N4F26M
 Version: 7.1.1
 Build Date: Sat Jun 23 16:20:44 CST 2018
 Mediatek Version Release: CPH1717EX_11_A.13_180623
 Model: CPH1717
 Brand: OPPO
 Device: CPH1717
 Display ID: CPH1717EX_11_A.13_180623
 [3]OPPO IMEI: 865520030750054
 SN: 9LEEJVZDDY9SPB5L
 Wait untill phone will start charging.
 All done.

Factory reset

Action : Format UserData.
 Selected OPPO:A71
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Keep VOL+ and VOL- button untill inserting USB cable.
 Detected : MTK USB Port (COM6)
 Boot mode: Brom
 Phone detected...Please wait
 Using Algo 3.
 Helio MT6755 phone detected, swithing to helio api
 Loading Custom Preloader
 BBCHIP MT6755
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 15010047453642 : 000000000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 -Reading GPT Drive OK
 Detecting format adress....wait!
 Starting generic userdata format...!
 Partition: cache  begin: 0x12d000000       length: 0x10000000     
 Partition: userdata  begin: 0x13d000000       length: 0x265dfbe00     
 Phone can start slow at first power on
 If phone stuck on logo, perform wipe from recovery.
 First start can take up to 5 min on some phones.
 Wait untill phone will start charging.
 All done.

FRP Remove

Exe version: NCKDongle AndroidMTK 2.5.9.0
 Selected model: A71
 Action: Reset FRP
 Reinsert phone battery.
 Battery must be charged.
 Keep VOL+ and VOL- button untill inserting USB cable.
 Detected : MTK USB Port (COM6)
 Boot mode: Brom
 Phone detected...Please wait
 Using Algo 3.
 Helio MT6755 phone detected, swithing to helio api
 Loading Custom Preloader
 BBCHIP MT6755
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 15010047453642 : 000000000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 -Reading GPT Drive OK
 Checking data, wait...
 
 Erasing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 All done.

 

[maanarman]

Logs

 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Selected model: ELBRUS
 Action: Reset FRP
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 90014A483847316505 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 -Reading GPT Drive OK
 Checking data, wait...
 
 Erasing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 All done.

 

[maanarman]

Logs

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM47)
 Boot mode: Preloader
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 3 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+24576Mb) SAMSUNG 0x524531424d42
 EMMC FW VERSION: 0d:00:00:00:00:00:00:00
 EMMC CID: 150100524531424D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 -Reading GPT Drive OK
 Build ID: NMA26.42-11-3
 Version: 7.1.1
 Build Date: Sat May  6 04:42:45 CDT 2017
 Model: Moto E (4) Plus
 Brand: motorola
 Device: nicklaus
 Manufacturer: motorola
 Mediatek Version Release: alps-mp-n1.mp1-V1_lenovo6737m.35.n1_P42
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 355633083980705
 IMEI[2] from NVRAM: 355633084028207
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000       
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000       
 Start processing lk ......
 Start processing boot
 Start processing recovery
 Start processing logo ......
 Start processing secro
 Reading:  BEGIN: 0x5380000        - LEN: 0x600000       
 Start processing trustzone
 Start processing persist ......
 Reading:  BEGIN: 0x6b80000        - LEN: 0x3000000       
 Start processing utags ......
 Reading:  BEGIN: 0x9c00000        - LEN: 0x80000         
 Start processing frp ......
 Reading:  BEGIN: 0x9c80000        - LEN: 0x100000       
 Start processing nvdata ......
 Reading:  BEGIN: 0x9d80000        - LEN: 0x2000000       
 Start processing hw ......
 Reading:  BEGIN: 0xdd80000        - LEN: 0x800000       
 Start processing oem ......
 Reading:  BEGIN: 0xe580000        - LEN: 0x10280000     
 Start processing system
 Reading:  BEGIN: 0x1e800000       - LEN: 0xc0000000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6737M_EMMC_motorola_Moto E (4) Plus_7_1_1_alps-mp-n1_mp1-V1_lenovo6737m_35_n1_P42(2018_08_09_21_46)
 Wait untill phone will start charging.
 All done.

 

[maanarman]

Logs

 Flash files count is :9
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.8.9
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM64)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x463732324d42
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 150100463732324D42 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM72)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader saved in firmware directory.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.