Post here successfully Unlocked / Repaired / Flashed operations via NCK BOX/Dongle Premium v2

maanarman · Jul 30, 2018

Code:

Exe Version: NckDongle Qualcomm Module 0.12.1
Operation: Reset FRP
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM59) detected.
Hello received.
HW ID: 00000000E1A00900 MSM8953
PK HASH: 60BA997FEF6DA9F05885FA11F1DD6D2A90D052A257A09C2075D7246CC73C0D43
Checking database for suitable loader.....
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
CPU: MSM8953
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 58.24 GB  Partitions count: 54
[06A51BCF]Userdata Size: 53.16 GB
Erasing FRP, wait.....
Erasing FRP, finished
Restarting phone.....
*************************************
Log saved: C:\Users\test\Documents\NckDongle\qc_module_Logs\reset_frp_MSM8953_00000000E1A00900_60BA997FEF6DA9F05885FA11F1DD6D2A90D052A257A09C2075D7246CC73C0D431.txt
Total Time: 00:00:07
Done.

maanarman · Jul 31, 2018

Logs

Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM10)
Boot mode: Preloader
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (114Gb+16384Mb) KSI 0x454841434541
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 700100454841434541 : 00000000000000
EMMC UA SIZE: 0x390000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x390c00000 [14.262 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM Port (COM26)
-Reading GPT Drive OK
Build ID: NRD90M
Display ID: WX4Pro-H3712A-N-171110V87
Version: 7.0
Build Date: Fri Nov 10 12:20:27 CST 2017
Model: TECNO WX4 Pro
Brand: TECNO
Device: TECNO-WX4-Pro
Manufacturer: TECNO
Mediatek Version Release: WX4Pro-H3712A-N-171110V87
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 357202082127227
IMEI[2] from NVRAM: 357202082127235
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk ......
Start processing boot
Start processing recovery
Start processing logo ......
Start processing secro
Reading: BEGIN: 0x5200000 - LEN: 0x600000
Start processing trustzone
Start processing frp ......
Reading: BEGIN: 0x6a00000 - LEN: 0x100000
Start processing nvdata ......
Reading: BEGIN: 0x6b00000 - LEN: 0x2000000
Start processing system
Reading: BEGIN: 0xb000000 - LEN: 0x100000000
Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6737M_EMMC_TECNO_TECNO WX4 Pro_7_0_WX4Pro-H3712A-N-171110V87(2018_07_24_17_25)
Wait untill phone will start charging.
All done.

maanarman · Jul 31, 2018

Info

Code:

 Action : Format UserData.
 Selected 0-By CPU:ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6753
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 3 GB  DRAM
 ----------------------------------------------------
 EMMC: (117Gb+24576Mb) HYNIX 0x484147326505
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 90014A484147326505 : 00000000000000
 EMMC UA SIZE: 0x3ab800000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3ac400000      [14.691 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 -Reading GPT Drive OK
 Detecting format adress....wait!
 Starting generic userdata format...!
 Partition: cache  begin: 0xcb000000        length: 0x19000000     
 Partition: userdata  begin: 0xe4000000        length: 0x2c6780000     
 Phone can start slow at first power on
 If phone stuck on logo, perform wipe from recovery.
 First start can take up to 5 min on some phones.
 Wait untill phone will start charging.
 All done.

FRP Remove

Code:

Exe version: NCKDongle AndroidMTK 2.5.9.0
 Selected model: ELBRUS
 Action: Reset FRP
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6753
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 3 GB  DRAM
 ----------------------------------------------------
 EMMC: (117Gb+24576Mb) HYNIX 0x484147326505
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 90014A484147326505 : 00000000000000
 EMMC UA SIZE: 0x3ab800000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3ac400000      [14.691 GB]
 -Reading GPT Drive OK
 Checking data, wait...
 
 Erasing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 All done.

maanarman · Aug 2, 2018

Info

Code:

 Action : Boot Info.
 Selected 0-By CPU:ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6582
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+8192Mb) TOSIBA 0x303034473930
 EMMC FW VERSION: 51:00:00:00:00:00:00:00
 EMMC CID: 110100303034473930 : 00000000000000
 EMMC UA SIZE: 0xec000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xec480000       [3.692 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 Build ID: KOT49H
 Display ID: ALPS.KK1.MP1.V2.10
 Version: 4.4.2
 Build Date: 2014年 08月 08日 星期五 10:18:31 CST
 Model: QMobile i9
 Brand: QMobile
 Device: QMobile i9
 Region: US
 Mediatek Version Release: ALPS.KK1.MP1.V2.10
 IMEI[1]: 353616061034803
 IMEI[2]: 353616066034808
 Wait untill phone will start charging.
 All done.

Write Flash

Code:

Flash files count is :11
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6582
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+8192Mb) TOSIBA 0x303034473930
 EMMC FW VERSION: 51:00:00:00:00:00:00:00
 EMMC CID: 110100303034473930 : 00000000000000
 EMMC UA SIZE: 0xec000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xec480000       [3.692 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader backup already exist, skip saving.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

maanarman · Aug 2, 2018

Logs

Code:

 Flash files count is :11
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6572
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+4096Mb) HYNIX 0x483447326111
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 90014A483447326111 : 00000000000000
 EMMC UA SIZE: 0xe9000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9c00000       [3.652 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader backup already exist, skip saving.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

Code:

maanarman · Aug 2, 2018

Factory Reset

Code:

Exe Version: NckDongle Qualcomm Module 0.12.1
Operation: Factory Format
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM59) detected.
Hello received.
HW ID: 00000000E1507000 MSM8916
PK HASH: CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F
Checking database for suitable loader.....
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
CPU: MSM8916
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 14.68 GB  Partitions count: 38
[0164639F]Userdata Size: 11.14 GB
Manufacturer: OPPO
Cpu: arm64-v8a
Build Id: LMY47V
Model: A37f
Android Release: 5.1.1
Android Version: A37fEX_11_171008
Config: diag,serial_smd,rmnet_bam,adb
Security patch: 2017-09-01
Resetting cache , wait
Total blocks 10
Resetting userdata , wait
Total blocks 119
Factory reset done, wait untill phone start
This can take up to 5 min on slow phones.
Restarting phone.....
*************************************
Log saved: C:\Users\test\Documents\NckDongle\qc_module_Logs\reset_userdata_MSM8916_00000000E1507000_CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F9.txt
Total Time: 00:00:36
Done.

FRP Remove

Code:

Exe Version: NckDongle Qualcomm Module 0.12.1
Operation: Reset FRP
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM59) detected.
Hello received.
HW ID: 00000000E1507000 MSM8916
PK HASH: CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F
Checking database for suitable loader.....
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
CPU: MSM8916
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 14.68 GB  Partitions count: 38
[0164639F]Userdata Size: 11.14 GB
Erasing FRP, wait.....
Erasing FRP, finished
Restarting phone.....
*************************************
Log saved: C:\Users\test\Documents\NckDongle\qc_module_Logs\reset_frp_MSM8916_00000000E1507000_CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F7.txt
Total Time: 00:00:03
Done.

maanarman · Aug 2, 2018

Logs

Code:

 Flash files count is :12
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM47)
 Boot mode: Preloader
 Using Algo 2.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6753
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 3 GB  DRAM
 ----------------------------------------------------
 EMMC: (117Gb+24576Mb) HYNIX 0x484147326505
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 90014A484147326505 : 00000000000000
 EMMC UA SIZE: 0x3ab800000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3ac400000      [14.691 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader backup already exist, skip saving.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

maanarman · Aug 2, 2018

Logs

Code:

Exe Version: NckDongle Qualcomm Module 0.12.1
Operation: Factory Format
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM59) detected.
Hello received.
HW ID: 00000000E1408100 MSM8610
PK HASH: CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F
Checking database for suitable loader.....
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
CPU: MSM8x26
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 7.28 GB  Partitions count: 21
[00BE5F9F]Userdata Size: 5.95 GB
Manufacturer: Rivo
Cpu: armeabi-v7a
Build Id: KVT49L
Model: Phantom PZ10
Android Release: 4.4.2
Android Version: RIVO_phantom_PZ10_V8
Config: diag,serial_smd,serial_tty,rmnet_bam,mass_storage,adb
Resetting cache , wait
Total blocks 10
Resetting userdata , wait
Total blocks 72
Factory reset done, wait untill phone start
This can take up to 5 min on slow phones.
Restarting phone.....
*************************************
Log saved: C:\Users\test\Documents\NckDongle\qc_module_Logs\reset_userdata_MSM8x26_00000000E1408100_CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F1.txt
Total Time: 00:00:41
Done.

maanarman · Aug 4, 2018

Info

Code:

 Action : Boot Info.
 Selected OPPO:A83
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Keep VOL- button untill inserting USB cable.
 Detected : MTK USB Port (COM6)
 Boot mode: Brom
 Phone detected...Please wait
 Using Algo 3.
 Helio MT6763 phone detected, swithing to helio api
 Loading Custom Preloader
 BBCHIP MT6763
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 90014A48434738 : 000000000000000000
 EMMC UA SIZE: 0xe8f800000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe90400000      [58.254 GB]
 -Reading GPT Drive OK
 This phone have FRP partition.
 Build ID: N6F26Q
 Version: 7.1.1
 Build Date: Thu Apr 19 10:47:42 CST 2018
 Mediatek Version Release: A83js_11_A.13_180419
 Model: OPPO A83js
 Brand: OPPO
 Device: M6763D
 Display ID: A83jsEX_11_A.13_180419
 [3]OPPO IMEI: 867611034311056
 SN: OZPZS8ZSLV95PRLR
 Wait untill phone will start charging.
 All done.

FRP Remove

Code:

 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Selected model: A83
 Action: Reset FRP
 Reinsert phone battery.
 Battery must be charged.
 Keep VOL- button untill inserting USB cable.
 Detected : MTK USB Port (COM6)
 Boot mode: Brom
 Phone detected...Please wait
 Using Algo 3.
 Helio MT6763 phone detected, swithing to helio api
 Loading Custom Preloader
 BBCHIP MT6763
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 90014A48434738 : 000000000000000000
 EMMC UA SIZE: 0xe8f800000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe90400000      [58.254 GB]
 -Reading GPT Drive OK
 Starting helio frp, not disconnect phone untill done
 [0]FRP Reset Done.
 [2]FRP Reset Done.
 All done.

maanarman · Aug 5, 2018

Info

Code:

 Action : Boot Info.
 Selected 0-By CPU:ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.8.9
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM24)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: F40122426977696E20 : 00000000000000
 EMMC UA SIZE: 0x1cd000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1cdc00000      [7.215 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM132)
 -Reading GPT Drive OK
 This phone have FRP partition.
 Build ID: LMY47I
 Display ID: Z6U190HF_YT_V008En
 Version: 5.1
 Build Date: Fri Sep  1 01:13:25 CST 2017
 Model: gxq6580_weg_l
 Brand: alps
 Device: gxq6580_weg_l
 Region: US
 Mediatek Version Release: ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69
 IMEI[1]: 354741100857177
 IMEI[2]: 354741100857185
 Wait untill phone will start charging.

Write Flash

[CODE]Flash files count is :8
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.8.9
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM24)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: F40122426977696E20 : 00000000000000
 EMMC UA SIZE: 0x1cd000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1cdc00000      [7.215 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM132)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader backup already exist, skip saving.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

All done.[/CODE]

maanarman · Aug 5, 2018

Logs

Code:

 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Selected model: ELBRUS
 Action: Reset FRP
 Will be used loader: tecno k8 da.bin
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+16384Mb) SAMSUNG 0x514536334d42
 EMMC FW VERSION: 03:00:00:00:00:00:00:00
 EMMC CID: 150100514536334D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 -Reading GPT Drive OK
 Checking data, wait...
 
 Erasing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 All done.

maanarman · Aug 5, 2018

Code:

 Flash files count is :10
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+4096Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: F40122426977696E20 : 00000000000000
 EMMC UA SIZE: 0x1cd000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1cdc00000      [7.215 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader saved in firmware directory.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

maanarman · Aug 5, 2018

Info

Code:

 Action : Boot Info.
 Selected Lenovo:A2016a40
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6735M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x463732324d42
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 150100463732324D42 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 -Reading GPT Drive OK
 This phone have FRP partition.
 Build ID: MRA58K
 Display ID: A2016a40_S219_160908_8G_ROW
 Version: 6.0
 Build Date: Sun Sep 18 10:34:45 CST 2016
 Sw Internal Version: A2016a40_USR_S219_1609082120_MP3V1_8G_ROW
 Model: Lenovo A2016a40
 Brand: Lenovo
 Device: A2016a40
 Mediatek Version Release: A2016a40_USR_S219_1609082120_MP3V1_8G_ROW
 IMEI[1]: 861028030296833
 IMEI[2]: 861028030296841
 Wait untill phone will start charging.
 All done.

FRP Remove

Code:

Exe version: NCKDongle AndroidMTK 2.5.9.0
 Selected model: A2016a40
 Action: Reset FRP
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6735M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x463732324d42
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 150100463732324D42 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 -Reading GPT Drive OK
 Checking data, wait...
 
 Erasing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 All done.

maanarman · Aug 6, 2018

Info

Code:

Action : Boot Info.
 Selected 0-By CPU:ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Will be used loader: morotola x1723.bin
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+8192Mb) SAMSUNG 0x464531324d42
 EMMC FW VERSION: 0d:00:00:00:00:00:00:00
 EMMC CID: 150100464531324D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 -Reading GPT Drive OK
 This phone have FRP partition.
 Build ID: NRD90M.01
 Display ID: NRD90M.01 007
 Version: 7.0
 Build Date: Mon Jan  9 11:21:20 CST 2017
 Model: XT1723
 Brand: motorola
 Device: panell
 Mediatek Version Release: alps-mp-n0.mp1-V1.0.2_gr6737m.35.le.n_P6
 OTP IMEI: 355645080037032
 Wait untill phone will start charging.
 All done.

FRP Remove

Code:

 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Selected model: ELBRUS
 Action: Reset FRP
 Will be used loader: morotola x1723.bin
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+8192Mb) SAMSUNG 0x464531324d42
 EMMC FW VERSION: 0d:00:00:00:00:00:00:00
 EMMC CID: 150100464531324D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 -Reading GPT Drive OK
 Checking data, wait...
 
 Erasing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 All done.

maanarman · Aug 7, 2018

Logs

Code:

Exe Version: NckDongle Qualcomm Module 0.12.1
Operation: Reset FRP
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM59) detected.
Hello received.
HW ID: 00000000E1507000 MSM8916
PK HASH: CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F
Checking database for suitable loader.....
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
CPU: MSM8916
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 14.56 GB  Partitions count: 38
[0160B39F]Userdata Size: 11.02 GB
Erasing FRP, wait.....
Erasing FRP, finished
Restarting phone.....
*************************************
Log saved: C:\Users\test\Documents\NckDongle\qc_module_Logs\reset_frp_MSM8916_00000000E1507000_CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F8.txt
Total Time: 00:00:03
Done.

maanarman · Aug 12, 2018

Logs

Code:

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM24)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+16384Mb) SAMSUNG 0x514531334d42
 EMMC FW VERSION: 0d:00:00:00:00:00:00:00
 EMMC CID: 150100514531334D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM132)
 -Reading GPT Drive OK
 Build ID: NRD90M
 Display ID: X557-H807AD-N-171110V163
 Version: 7.0
 Build Date: Fri Nov 10 21:28:22 CST 2017
 Model: Infinix HOT 4
 Brand: Infinix
 Device: X557
 Manufacturer: Infinix
 Mediatek Version Release: X557-H807AD-N-171110V163
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 351650091478302
 IMEI[2] from NVRAM: 351650091478310
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000       
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000       
 Start processing lk ......
 Start processing boot
 Start processing recovery
 Start processing logo ......
 Start processing frp ......
 Reading:  BEGIN: 0x4fa0000        - LEN: 0x100000       
 Start processing nvdata ......
 Reading:  BEGIN: 0x50a0000        - LEN: 0x2000000       
 Start processing secro
 Reading:  BEGIN: 0x9a00000        - LEN: 0x600000       
 Start processing system
 Reading:  BEGIN: 0xa800000        - LEN: 0xc0000000     
 Saved to : C:\Users\maanarman\Desktop\TEMP\Android_MTK\firmware_backup\MT6580_EMMC_Infinix_Infinix HOT 4_7_0_X557-H807AD-N-171110V163(2018_08_09_16_23)
 Wait untill phone will start charging.
 All done.

maanarman · Aug 12, 2018

Logs

Code:

 Flash files count is :9
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 90014A483847316505 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader saved in firmware directory.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

maanarman · Aug 12, 2018

Logs

Code:

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+16384Mb) SAMSUNG 0x513832334d42
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 150100513832334D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 -Reading GPT Drive OK
 Build ID: MRA58K
 Display ID: VGOTEL_VENTURE_11_V07
 Version: 6.0
 Build Date: Wed Mar 15 02:54:03 PDT 2017
 Model: VENTURE 11
 Brand: VGOTEL
 Device: VENTURE_11
 Manufacturer: VGOTEL
 Region: US
 Mediatek Version Release: alps-mp-m0.mp1-V2.34_vsun6580.we.m_P2
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 358241080080649
 IMEI[2] from NVRAM: 358241080080656
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000       
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000       
 Start processing lk ......
 Start processing boot
 Start processing recovery
 Start processing logo ......
 Start processing frp ......
 Reading:  BEGIN: 0x4fa0000        - LEN: 0x100000       
 Start processing nvdata ......
 Reading:  BEGIN: 0x50a0000        - LEN: 0x2000000       
 Start processing secro
 Reading:  BEGIN: 0x9a00000        - LEN: 0x600000       
 Start processing system
 Reading:  BEGIN: 0xa800000        - LEN: 0xa2800000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6580_EMMC_VGOTEL_VENTURE 11_6_0_alps-mp-m0_mp1-V2_34_vsun6580_we_m_P2(2018_08_12_14_58)
 Wait untill phone will start charging.
 All done.

maanarman · Aug 13, 2018

Info

Code:

 Action : Boot Info.
 Selected 0-By CPU:ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6582
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+4096Mb) HYNIX 0x483447316404
 EMMC FW VERSION: 05:00:00:00:00:00:00:00
 EMMC CID: 90014A483447316404 : 00000000000000
 EMMC UA SIZE: 0xe9000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9c00000       [3.652 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 Build ID: JDQ39
 Display ID: ALPS.JB5.MP.V1.6
 Version: 4.2.2
 Build Date: 2014年 03月 31日 星期一 12:07:28 CST
 Model: QMobile i5
 Brand: QMobile
 Device: QMobile i5
 Region: US
 Mediatek Version Release: ALPS.JB5.MP.V1.6
 IMEI[1]: 353861060437579
 IMEI[2]: 353861065437574
 Wait untill phone will start charging.
 All done.

Write FF

Code:

 Flash files count is :13
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6582
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+4096Mb) HYNIX 0x483447316404
 EMMC FW VERSION: 05:00:00:00:00:00:00:00
 EMMC CID: 90014A483447316404 : 00000000000000
 EMMC UA SIZE: 0xe9000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9c00000       [3.652 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader backup already exist, skip saving.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

maanarman · Aug 14, 2018

Logs

Code:

 Flash files count is :10
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.8.9
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM24)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+16384Mb) SAMSUNG 0x514531334d42
 EMMC FW VERSION: 0d:00:00:00:00:00:00:00
 EMMC CID: 150100514531334D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM132)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader saved in firmware directory.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

Post here successfully Unlocked / Repaired / Flashed operations via NCK BOX/Dongle Premium v2

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview