If You Have Any Problem Using UFI Box Or Any Problem Recover Set Post Here
- Thread starter Deepesh Sharma
- Start date
gatotkaca
Junior Member
- Nov 24, 2018
- 3
- 0
samsung emmc update problem
moviNAND Field firmware update...
Part name:
Product name: QE63MB (0x514536334d42), rev: 0x03
You may disconnect the emergency boot mode TP now !
Switch to boot mode(3)... Done.
Sending firmware, size: 301 KiB... Done.
Waiting 0s for the card to be ready...
Re-initializing card... Done.
Programming CID... failed !
moviNAND Field firmware update...
Part name:
Product name: QE63MB (0x514536334d42), rev: 0x03
You may disconnect the emergency boot mode TP now !
Switch to boot mode(3)... Done.
Sending firmware, size: 301 KiB... Done.
Waiting 0s for the card to be ready...
Re-initializing card... Done.
Programming CID... failed !
ibafridi
Friend's Martview
gatotkaca
Junior Member
- Nov 24, 2018
- 3
- 0
my UFI box is normal again....i still using now....thank's for respons brother...
need help lg h791 dead boot repair
i try in 2 handset after write dump not recover
write tot file but not on any spacial trick
? plz guide me
i try in 2 handset after write dump not recover
write tot file but not on any spacial trick
? plz guide me
kensai
Member
Saludos meizu v8, esta soportada sin embargo dice scarted no soportado, su ayuda como lo soluciono
Gracias
Gracias
Hi !
I have a problem in support
I am a new user
I had this problem a month ago and I was not ready to send you an email
Please fix the problem
thanks ufi team
I have a problem in support
I am a new user
I had this problem a month ago and I was not ready to send you an email
Please fix the problem
thanks ufi team
sir when support.....show error 416.....please unblockme ...
Serial number: 0011-8840-4565
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Serial number: 0011-8840-4565
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Connection status: IUSB3HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4565
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H4G2b (0x483447326211), rev: 0x01, serial number: 0x6793DAF2
Manufacturing date: Sep 2015
CID: 90014A48 34473262 11016793 DAF292DE
j110h dead recovery need.....i not see any firmware on support...how i can dead boot?
CSD: D07F0132 0F5903FF FFFFFFEF 8A4040DA
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 3.64 GiB(3,909,091,328 bytes)
Cache size: 512 KiB
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x01
Bus width: x4 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
Selected: [HYNIX] eNAND H9TP32A4GDDCPR-KGM/4GB (BGA162)
Interface: UFI High-Speed
Serial number: 0011-8840-4565
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H4G2b (0x483447326211), rev: 0x01, serial number: 0x6793DAF2
Manufacturing date: Sep 2015
CID: 90014A48 34473262 11016793 DAF292DE
j110h dead recovery need.....i not see any firmware on support...how i can dead boot?
CSD: D07F0132 0F5903FF FFFFFFEF 8A4040DA
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 3.64 GiB(3,909,091,328 bytes)
Cache size: 512 KiB
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x01
Bus width: x4 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
Selected: [HYNIX] eNAND H9TP32A4GDDCPR-KGM/4GB (BGA162)
Hello sir
My ufi box worldwide version im use in pakistan v1.3.0.1156 not work with internet connection but without internet connection working fine so plz help me solve my problem
Im check 3 different laptop window 7 32 bit and 64 bit window 8 and 10 problem not solve.
Im upgrade firmware ufi box but problem same
plz help me solve my problem
plz check this video link
link 1
link 2
Hello sir
My ufi box worldwide version im use in pakistan v1.3.0.1156 not work with internet connection but without internet connection working fine so plz help me solve my problem
Im check 3 different laptop window 7 32 bit and 64 bit window 8 and 10 problem not solve.
Im upgrade firmware ufi box but problem same
plz help me solve my problem
plz check this video link
link 1
link 2
My ufi box worldwide version im use in pakistan v1.3.0.1156 not work with internet connection but without internet connection working fine so plz help me solve my problem
Im check 3 different laptop window 7 32 bit and 64 bit window 8 and 10 problem not solve.
Im upgrade firmware ufi box but problem same
plz help me solve my problem
plz check this video link
link 1
link 2
hello team need help after i reset frp Mi A1 use umt dongle phone dead i flash many firmware but still dead please help