Z3X Pandora PRO 6.10 Update.

[GsmToto]

Operation: Read Flash Info
Software version: 6.10
Work ID: 3349600

Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM2 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0699
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6739]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM2 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0699
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6739]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x5CAB7B5E, 0xF8E812ED, 0xA6C7D8DC, 0x35D45C46
Get Chip ID... [MT6739]
Get SOC ID... [BC48CE229F387D9409CF4A8B9A11C0B394B 01C4FAC79C13080E89A32B3C9596A]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [1]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x1501004200EB629747B715515836334D
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: QX63MB
EMMC_ID : 0x15010054200EB629747B71515836334D
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x0747C00000 (29,12Gb)
RAM INFO:
INT_SRAM: 0x0000020000 (128,00Kb)
EXT_RAM : 0x0080000000 (2,00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-A022M
Product Name : a02ub
Product Device : a02
Product Board : k39tv1_bsp_titan_hamster
Board Platform : mt6739
Build ID : RP1A.200720.012
Build Date : Fri Dec 22 23:13:28 KST 2023
Display ID : RP1A.200720.012.A022MUBS4BWL7
Security Patch : 2023-12-01
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : A022MUBS4BWL7
Userdata FS Type : F2FS
Read Flash Info done!

 

[syedsufiyan]

Sir vivo new update

 

[GsmToto]

Nokia TA-1352 (Nokia C20) reset frp Security Patch 2024-06-01 Pandora box
Selected model: Nokia TA-1352 (Nokia C20)
Operation: Erase FRP And Wipe
Software version: 6.10
Work ID: 33934622

Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM3
Port: USB\VID_1782&PID_4D00\6&260A8E58&0&1
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: SC9863A_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: E7087286790873
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : Nokia
Product Manufacturer : HMD Global
Product Model : COR
Product Name : CosmoRefresh_00WW
Product Device : COR
Product Board : CosmoRefresh
Board Platform : sp9863a
Build ID : RP1A.201005.001
Build Date : Tue May 28 02:13:30 UTC 2024
Security Patch : 2024-06-01
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 00WW_1_30C
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Creating default filesystems... [CACHE: EXT4] ... [USERDATA: F2FS] ... OK
Done!

 

[GsmToto]

Selected model: Xiaomi Redmi Note 11S (Fleur)
Operation: Eliminar FRP
Software version: 6.10

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Connect phone to [BOX] in BROM mode
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 1066
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6781]
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM2 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 1066
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6781]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x96E72E0C, 0x41F5F649, 0x002A3649, 0x30A20154
Get Chip ID... [MT6781]
Get SOC ID... [F81808B19B95AFCB3884329E09B31E3359C02D9D4958C1FC08 FD71ABA30F479S7]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [11]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
UFS CID (FW VER): MT128GAXAU2U227X (0101)
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : MT128GAXAU2U247JU
UFS_FWVER : 0101
BLOCK_SIZE: 0x0000001000 (4,00Kb)
UFS_LU0 : 0x0000400000 (4,00Mb)
UFS_LU1 : 0x0000400000 (4,00Mb)
UFS_LU2 : 0x1DCB000000 (119,17Gb)
RAM INFO:
INT_SRAM: 0x0000060000 (384,00Kb)
EXT_RAM : 0x0180000000 (6,00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : Redmi
Product Manufacturer : Xiaomi
Product Model : fleur
Product Name : fleur
Product Device : fleur
Product Board : fleur
Board Platform : mt6781
Build ID : SP1A.210812.016
Build Date : Mon Feb 19 15:31:53 UTC 2024
Display ID : TP1A.220624.014
Security Patch : 2024-02-01
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : V816.0.1.035S6XFEMIXM
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Xiaomi_Redmi%20Note%2011S%20(Fleur)/FRP_BACKUP_(2024-7-04_10-22-43)/
Writting FRP data... OK
Erase FRP done!

 

[GsmToto]

Selected model: Spreadtrum Spreadtrum
Operation: Flash
Software version: 6.10

Loading packet file... OK
Init partition data... OK
Init files... OK
Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to NONE... OK
Connect phone to [PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM2
Port: USB\VID_1782&PID_4D00\6&2C24CE2E&0&5
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Load files... OK
Flashing FDL...
SetCRC... OK
ConnectRom... OK
Download... OK
Excute... OK
ResetCRC... OK
Connect... OK
ChangeBaud... OK
Executing KeepCharge...
KeepCharge... OK
Flashing FDL2...
Download... OK
ExecNandInit... OK
Read partitions info... OK
Checking A/B state... OK
Read product info... error(2)
Executing _BKF_PhaseCheck...
ReadFlashByID... OK
Executing _BKF_ProdNV...
ReadFlashByID... OK
Executing _BKF_NV_LTE...
ReadFlashByID... OK
Executing _REPARTITION_...
ForceRepartitionByID... OK
Flashing NV_LTE...
ReadFlashByID... OK
DownloadByID... OK
Flashing ProdNV...
DownloadByID... OK
Executing PhaseCheck...
DownloadByID... OK
Executing EraseUBOOTLOG...
EraseFlashByID... OK
Flashing VBMETA...
DownloadByID... OK
Flashing OCDT...
DownloadByID... OK
Flashing VBMETA_SYSTEM...
DownloadByID... OK
Flashing VBMETA_SYSTEM_EXT...
DownloadByID... OK
Flashing VBMETA_VENDOR...
DownloadByID... OK
Flashing VBMETA_PRODUCT...
DownloadByID... OK
Flashing VBMETA_ODM...
DownloadByID... OK
Flashing Modem_LTE...
DownloadByID... OK
Flashing Modem_LTE_DELTANV...
DownloadByID... OK
Flashing DSP_LTE_LTE...
DownloadByID... OK
Flashing DSP_LTE_GGE...
DownloadByID... OK
Flashing DSP_LTE_AG...
DownloadByID... OK
Flashing DFS...
DownloadByID... OK
Flashing BOOT...
DownloadByID... OK
Flashing VENDOR_BOOT...
DownloadByID... OK
Flashing DTBO...
DownloadByID... OK
Flashing My_preload...
DownloadByID... OK
Flashing Super...
DownloadByID... OK
Flashing Cache...
DownloadByID... OK
Flashing BlackBox...
DownloadByID... OK
Flashing UserData...
DownloadByID... OK
Flashing BootLogo...
DownloadByID... OK
Flashing Fastboot_Logo...
DownloadByID... OK
Executing FLASH_LTE...
EraseFlashByID... OK
Executing EraseMisc...
EraseFlashByID... OK
Executing EraseSysdumpdb...
EraseFlashByID... OK
Flashing Trustos...
DownloadByID... OK
Flashing Teecfg...
DownloadByID... OK
Flashing SML...
DownloadByID... OK
Flashing UBOOTLoader...
DownloadByID... OK
Flashing Persist...
DownloadByID... OK
Executing EraseMetadata...
EraseFlashByID... OK
Flashing SPLLoaderEMMC...
DownloadByID... OK
Flashing SPLLoaderUFS...
DownloadByID... OK
Flashing done!

 

[GsmToto]

elected model: Mediatek Mediatek
Operation: Erase FRP
Software version: 6.10

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1633,usb2ser.sys,3.0.1504.0]
Device found at COM2 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xDD38450F, 0x82FDBEDB, 0x4A9171CF, 0x0279316D
Get Chip ID... [MT6833]
Get SOC ID... [653BB84FF640A8E77AA9F3C1052169CB EF390D18BAE8EDAE689F2C464388CD9A]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [14]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
UFS CID (FW VER): MT128GAXAU2U11 (0101)
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : MT128GAXAU2U11
UFS_FWVER : 0101
BLOCK_SIZE: 0x0000001000 (4,00Kb)
UFS_LU0 : 0x0000400000 (4,00Mb)
UFS_LU1 : 0x0000400000 (4,00Mb)
UFS_LU2 : 0x1DCB000000 (119,17Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : emporia
Product Manufacturer : emporia
Product Model : E6
Product Name : E6_EEA
Product Device : E6
Product Board : pri_board
Board Platform : mt6833
Build ID : SP1A.210812.016
Build Date : Tue Aug 15 12:26:39 CST 2023
Display ID : EMP.E6.MP.OM.V1.16
Security Patch : 2023-08-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 1692073511
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Mediatek_MT6833/FRP_BACKUP_(2024-7-9_21-43-11)/"directory
Writting FRP data... OK
Erase FRP done!

 

[Sohelsindid]

Pandora PRO 6.10 Update. New devices added


Added support TCL phones:

-T607DL TCL Ion V
-T608DL TCL 40 T


Added support Vortex phones:

- HD65 Ultra
- HD65 Choice
- HD65 Select
- CM62
- CG65
- CMG101
- HD65 PLUS
- T10M


Added support Bmobile phones:

- AX754+
- AX1073+


Added support Blackview phones:

- Blackview Color 8
- Oscal Pad 7
- Oscal Pad 80 WiFi
- Tab 90 WiFi
- Tab 16 Pro


Added support ZTE phones:

- Z6351O P650 Pro
- Z6355O P651 2021
- Z6556O A71 5G
- Z6621O Optus X Vista
- Z5155T Blade A5 2019

Fixed some bugs


181.85 MB file on MEGA


DO NOT POST ANY LOGS OF JOB HERE in this thread, if you have any error - open own thread and supporters will answer there!!!

where is update

 

[GsmToto]

Selected model: Tecno KG5j (Tecno Spark Go 2022)
Operation: Repair
Software version: 6.10

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xEAA408F1, 0xE0880C37, 0x5080A040, 0x16B7FC82
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
EMMC_ID: 0x1501004355473393DE58875544134320
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [5]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: CUTA42
EMMC_ID : 0x150100205473393DE588743555441343
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x0E8F800000 (58,24Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233,25Kb)
EXT_RAM : 0x0080000000 (2,00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO MOBILE LIMITED
Product Model : TECNO KG5j
Product Name : KG5j-OP
Product Device : TECNO-KG5j
Product Board : TECNO-KG5j
Board Platform : mt6761
Build ID : RP1A.200720.011
Build Date : Fri Jan 5 21:27:57 CST 2024
Display ID : TECNO-RGo-32-240105V367
Security Patch : 2024-01-01
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 240105V422
Userdata FS Type : F2FS
Read security partition from phone...
Decrypting security data... OK
Encrypt security data... OK
Read partition "nvdata"... OK
Read partition "protect1"... OK
Read partition "nvram"... OK
Read NVDATA files... OK
Read NVRAM files... OK
Read security files... OK
Calculating... OK
Read IMEI... OK
IMEI 1: 000000000000000
IMEI 2: 000000000000000
Repairing IMEI...
IMEI 1: 356xxxxxxxxxxxx
IMEI 2: 356xxxxxxxxxxxx
Write IMEI [NVDATA]... OK
Write IMEI [NVRAM]... OK
Write partition "nvdata"... OK
Write partition "nvram"... OK
Repair Security done!

 

[GsmToto]

Selected model: Vortex HD65 Ultra
Operation: Unlock network
Software version: 6.10

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM2 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0699
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6739]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x66B7FE5B, 0x06363F75, 0xAF93BB45, 0xE658E104
Get Chip ID... [MT6739]
Get SOC ID... [504ABAD31DBC7A1BAC81D20B05D67DA4021 EC416A28069F8873D7C50ABFF054F]
Get sec config... OK [00000000]
Load DownloadAgent... OK
Search DA... OK [1]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x1504201513B061495A3100474436424D
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: GD6BMB
EMMC_ID : 0x1501004201513B061495A3474436424D
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x0000020000 (128.00Kb)
EXT_RAM : 0x00C0000000 (3.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : Vortex
Product Manufacturer : Vortex
Product Model : HD65_Ultra
Product Name : HD65_Ultra
Product Device : HD65_Ultra
Product Board : k39tv1_64_bsp_k419
Board Platform : mt6739
Build ID : SP1A.210812.016
Build Date : Tue Feb 27 10:55:32 CST 2024
Display ID : Vortex_HD65_Ultra_V01_02272024
Security Patch : 2024-01-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 20240227
Userdata FS Type : EXT4
Read security partition from phone... OK
Read security files... OK
Read NVDATA files... OK
Calculating... OK
Read lock info... OK
Unlock... OK [DF1]
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!

 

[GsmToto]

Selected model: OPPO CPH2161 (OPPO A73 5G)
Operation: Read IMEI Info
Software version: 6.10
Work ID: 34956844

Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1633 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM2 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0996
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6853]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x1175F3C9, 0xE60197C5, 0x14CFA001, 0x144DB2B9
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
UFS CID (FW VER): KM8V8001JM-B813 (1900)
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [15]
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : KM8V8001JM-B813
UFS_FWVER : 1900
BLOCK_SIZE: 0x0000001000 (4.00Kb)
UFS_LU0 : 0x0000400000 (4.00Mb)
UFS_LU1 : 0x0000400000 (4.00Mb)
UFS_LU2 : 0x1DCB000000 (119.17Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : OPPO
Product Manufacturer : OPPO
Product Model : CPH2161
Product Name : CPH2161
Product Device : OP4EE8L1
Product Board : k6853v1_64_6360
Board Platform : mt6853
Build ID : SP1A.210812.016
Build Date : Tue Aug 2 10:22:36 CST 2022
Display ID : CPH2161_11_F.27
Security Patch : 2022-08-05
Version Release : 12
Firmware Version : Q.202208027811
Userdata FS Type : F2FS
Read partition "nvdata"... OK
Read partition "protect1"... OK
Read security files... OK
Read NVDATA files... OK
Calculating... OK

 

[GsmToto]

Selected model: Samsung SM-A326U (Samsung Galaxy A32 5G)
Operation: Erase FRP
Software version: 6.10

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM2 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0996
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6853]
Install LibUSB... OK
Waiting for device... OK
Open port... OK
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM2 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0996
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6853]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x6994B821, 0xD5CF5308, 0x88CED873, 0x2D3FCC8A
Get Chip ID... [MT6853]
Get SOC ID... [C651DE62C3F92415D6A7AAC4C486988B4 23E51ED82517A4B9F2DF603CA23586F]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [15]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
UFS CID (FW VER): KM5P8001DM-B424 (0002)
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : KM5P8001DM-B424
UFS_FWVER : 0002
BLOCK_SIZE: 0x0000001000 (4.00Kb)
UFS_LU0 : 0x0000400000 (4.00Mb)
UFS_LU1 : 0x0000400000 (4.00Mb)
UFS_LU2 : 0x0EE5800000 (59.59Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_FULL_SPEED
Switching to USB high speed... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek DA USB VCOM (Android),usb2ser.sys,3.0.1504.0]
High Speed USB detected at COM2
Open port... OK
Checking USB status... USB_FULL_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-A326U
Product Name : a32xsq
Product Device : a32x
Product Board : a32x
Board Platform : mt6853
Build ID : SP1A.210812.016
Build Date : Tue May 14 19:11:15 KST 2024
Display ID : TP1A.220624.014.A326USQSEDXY5
Security Patch : 2024-05-01
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : A326USQSEDXE3
Userdata FS Type : F2FS
Read partition "frp"... OK
Read partition "persistent"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Samsung_SM-A326U%20(Samsung%20Galaxy%20A32%205G)/FRP_BACKUP_(2024-7-12_21-19-22)/
Writting FRP data... OK
Erase FRP done!

 

[GsmToto]

Selected model: ATT U705AA (ATT Radiant Max)
Operation: Unlock network
Software version: 6.10

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x0F4B7815, 0x3EA6A883, 0x9B1D9259, 0x4DF1C076
Get Chip ID... [MT6765]
Get SOC ID... [3A5B11971394EE0F0C89A167BA26CDEA3D CBC9F0CD69BB0722361AAB83D0CDBC]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x1501042026DC2D04C374B0444436384D
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DD68MB
EMMC_ID : 0x1501004442026DC2D04C374B4436384D
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0000400000 (4,00Mb)
EMMC_USER : 0x0747C00000 (29,12Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232,00Kb)
EXT_RAM : 0x00C0000000 (3,00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : Cricket
Product Manufacturer : TINNO
Product Model : U705AC
Product Name : U705AC
Product Device : U705AC
Product Board : u705
Board Platform : mt6765
Build ID : QP1A.190711.020
Build Date : Mon Jun 29 15:33:00 CST 2020
Display ID : QP1A.190711.020 release-keys
Security Patch : 2020-06-05
Version SDK : 29
Version Release : 10
Version Codename : REL
Firmware Version : 822
Userdata FS Type : EXT4
Read security partition from phone... OK
Read security files... OK
Read NVDATA files... OK
Calculating... OK
Read lock info... OK
Read partition "nvdata"... OK
Read partition "protect1"... OK
Read security files... OK
Read NVDATA files... OK
Read IMEI... OK
Unlock... OK [DF1, DF2]
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!

 

[GsmToto]

Selected model: Nokia TA-1346 (Nokia G10)
Operation: Wipe Data
Software version: 6.10
Existe riesgo de pérdida de datos.
Este procedimiento borrará todos los datos del usuario.
Asegúrate de tener una copia de seguridad creada. ¿Continuar? YES

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Connect phone to [BOX] in BROM mode
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM2[BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xAFCCC4FB, 0x8D8D32DA, 0x2BBE9EC4, 0x1C320E8C
Get Chip ID... [MT6765]
Get SOC ID... [61A52C2C9FE18521113BA930E193C4B55F8 C940F031499FC60BE3D65B7F6EC5E]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xD63631118244A324C88F010341334135H
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: A3A561
EMMC_ID : 0xD60118244A324C88F103413341353631H
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x0E67800000 (57,62Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232,00Kb)
EXT_RAM : 0x00C0000000 (3,00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : Nokia
Product Manufacturer : HMD Global
Product Model : Nokia G10
Product Name : Rogue_00WW
Product Device : ROGA_sprout
Product Board : MT6762
Board Platform : mt6765
Build ID : SP1A.210812.016
Build Date : Mon Apr 8 06:28:32 UTC 2024
Display ID : 00WW_3_39K
Security Patch : 2024-04-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 00WW_3_39K
Userdata FS Type : EXT4
Formatting "userdata" partition... OK
Formatting "metadata" partition... OK
Formatting "md_udc" partition... OK
Wipe data done!

 

[GsmToto]

Modelo seleccionado: Realme RMX3231 (Realme C11 2021)
Operación: Erase FRP And Wipe
Versión del software: 6.10

Apagado del host... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Encendido del host... OK
Connect phone to [BOX or PC]
Conecte el teléfono en modo BROM. Utilice los botones de la tecla de volumen o el punto de prueba.
Esperando por el dispositivo... DE ACUERDO
Dispositivo encontrado en COM2
Port: USB\VID_1782&PID_4D00\6&18B88C3&3&2
Conductor: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Tipo de puerto: BROM
Conectándose a dispositivo... DE ACUERDO
Procesador seleccionado: SC9863A_64
Cargar archivos... (universal) DE ACUERDO
Conectar precargador 1... DE ACUERDO
Conectar precargador 2... DE ACUERDO
Conectar cargador 1... DE ACUERDO
Conectar cargador 2... DE ACUERDO
Número de serie: 0251805S45101346
Leer información de particiones... DE ACUERDO
Comprobación del estado A/B... DE ACUERDO [A]
Leer información del producto... [EXT4] ... DE ACUERDO
Product Brand : realme
Product Manufacturer : realme
Product Model : RMX3231
Product Device : RMX3231
Product Board : RMX3231
Board Platform : sp9863a
Build ID : RP1A.201005.001
Build Date : Fri Dec 8 09:08:51 CST 2023
Display ID : RMX3231_11.A.121
Security Patch : 2023-12-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 464
Userdata FS Type : F2FS
Particiones de copia de seguridad... DE ACUERDO
Formateo de la partición "persist"... DE ACUERDO
Formateo de la partición "userdata"... DE ACUERDO
Formateo de la partición "cache"... DE ACUERDO
Formateo de la partición "metadata"... DE ACUERDO
Creación de sistemas de archivos predeterminados... [CACHE: EXT4] ... [USERDATA: F2FS] ... DE ACUERDO
Hecho!

 

[GsmToto]

Selected model: Realme RMX3231 (Realme C11 2021)
Operation: Flash
Software version: 6.10
Work ID: 35393223

Loading packet file... OK
Init partition data... OK
Init files... OK
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM3
Port: USB\VID_1782&PID_4D00\5&37033362&0&6
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Load files... OK
Selected processor: SC9863A_63
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 0002805R51006322245
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : realme
Product Manufacturer : realme
Product Model : RMX3231
Product Device : RMX3231
Product Board : RMX3231
Board Platform : sp9863a
Build ID : RP1A.201005.001
Build Date : Thu May 9 16:45:25 CST 2024
Display ID : RMX3231_11.A.125
Security Patch : 2024-02-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 478
Userdata FS Type : F2FS
Executing _BKF_PhaseCheck...
ReadFlashByID... OK
Executing _BKF_ProdNV...
ReadFlashByID... OK
Executing _BKF_NV_LTE...
ReadFlashByID... OK
Executing _REPARTITION_...
ForceRepartitionByID... OK
Flashing NV_LTE...
ReadFlashByID... OK
DownloadByID... OK
Flashing ProdNV...
DownloadByID... OK
Executing PhaseCheck...
DownloadByID... OK
SetTimeStamp... OK
Executing EraseUBOOT...
EraseFlashByID... OK
Executing EraseUBOOTLOG...
EraseFlashByID... OK
Flashing SPLLoader...
DownloadByID... OK
Flashing VBMETA...
DownloadByID... OK
Flashing OCDT...
DownloadByID... OK
Flashing VBMETA_SYSTEM...
DownloadByID... OK
Flashing VBMETA_SYSTEM_EXT...
DownloadByID... OK
Flashing VBMETA_VENDOR...
DownloadByID... OK
Flashing VBMETA_PRODUCT...
DownloadByID... OK
Flashing Modem_LTE...
DownloadByID... OK
Flashing Modem_LTE_DELTANV...
DownloadByID... OK
Flashing DSP_LTE_LTE...
DownloadByID... OK
Flashing DSP_LTE_GGE...
DownloadByID... OK
Flashing DFS...
DownloadByID... OK
Flashing GPS_GL...
DownloadByID... OK
Flashing GPS_BD...
DownloadByID... OK
Flashing Modem_WCN...
DownloadByID... OK
Flashing BOOT...
DownloadByID... OK
Flashing DTBO...
DownloadByID... OK
Flashing My_preload...
DownloadByID... OK
Flashing Super...
DownloadByID... OK
Flashing Cache...
DownloadByID... OK
Flashing UserData...
DownloadByID... OK
Flashing BootLogo...
DownloadByID... OK
Flashing Fastboot_Logo...
DownloadByID... OK
Flashing Socko...
DownloadByID... OK
Flashing Odmko...
DownloadByID... OK
Executing FLASH_LTE...
EraseFlashByID... OK
Executing EraseMisc...
EraseFlashByID... OK
Executing EraseSysdumpdb...
EraseFlashByID... OK
Flashing Trustos...
DownloadByID... OK
Flashing Teecfg...
DownloadByID... OK
Flashing SML...
DownloadByID... OK
Flashing Persist...
DownloadByID... OK
Executing EraseMetadata...
EraseFlashByID... OK
Flashing UBOOTLoader...
DownloadByID... OK
Flashing done!

 

[GsmToto]

Selected model: Lg Q730AM (Lg Stylo 6)
Operation: Erase FRP And Wipe
Software version: 6.10
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [Microsoft,usbser,USB Serial Device,usbser.sys,10.0.19041.3636]
You are using driver version 10.0.19041.3636, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM4 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x743BC9EB, 0xD5FE31C0, 0x7AC34907, 0x01182EA4
Get Chip ID... [MT6765]
Get SOC ID... [4BDCE6BDEF777A098DD8999771A5740 3D8BE1772D17C233B4704100952057E5A]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x13014E8327F2B77347314A395038100C
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: G1J9P8
EMMC_ID : 0x13014E473148327F2B773A395038100C
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x00C0000000 (3.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : lge
Product Manufacturer : LGE
Product Model : LM-Q730
Product Name : mdh50lm
Product Device : mdh50lm
Product Board : mt6765
Board Platform : mt6765
Build ID : QKQ1.200216.002
Build Date : Mon Dec 21 07:00:05 KST 2020
Security Patch : 2021-01-01
Version SDK : 29
Version Release : 10
Version Codename : REL
Firmware Version : 203560701aa8a
Userdata FS Type : EXT4
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Lg_Q730AM%20(Lg%20Stylo%206)/FRP_BACKUP_(2024-7-19_05-44-43)/
Writting FRP data... OK
Formatting "userdata" partition... OK
Formatting "metadata" partition... OK
Formatting "md_udc" partition... OK
Wipe data done!

 

[GsmToto]

Selected model: TCL Mediatek
Operation: Erase FRP
Software version: 6.10

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM2 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 8167
Get sec config... OK [000000E1]
Active sec flags: [SBC]
Get HW & SW version from device... OK
HW VER: CB00, SW VER: 0001, HW SUB CODE: 8A00
Detect chip [MT8167]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x3AF90BC4, 0x146BC0A7, 0xE2B84596, 0x606BEBCF
Get Chip ID... [MT8167]
Get sec config... OK [000000E1]
Get hw mode... OK
Load DownloadAgent... OK
Search DA... OK [20]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xF4012241524C5048495B4A313158102F
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: ARJ11X
EMMC_ID : 0xF4012241524A313158102F4C5048495B
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0748000000 (29.13Gb)
RAM INFO:
INT_SRAM: 0x0000038000 (224.00Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
Checking USB status... USB_FULL_SPEED
Switching to USB high speed... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek DA USB VCOM (Android),usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
High Speed USB detected at COM41
Open port... OK
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TCL
Product Manufacturer : TCL
Product Model : 8491X
Product Name : 8491X
Product Device : Aquaman_10_Smart_WIFI
Product Board : t6737_p4mme
Board Platform : mt8167
Build ID : RP1A.200720.011
Build Date : Wed Oct 26 02:49:54 UTC 2022
Display ID : 01004
Security Patch : 2022-07-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : JB5
Userdata FS Type : EXT4
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/TCL_MT8167/FRP_BACKUP_(2024-7-20_09-32-44)/
Writting FRP data... OK
Erase FRP done!

 

[jadoon]

pandora z3x team long time no working no update vivo mtk tecno mtk 2024 not working

 

[ladle raza]

pandora update kab hoga

 

[aliipi]

TAKING TO MUCH TIME no working no update VIVO INFINIX TECHNO ITEL NEW SECURITY mtk 2024 ALSO ADD MDM UNLOCK