Z3X Pandora PRO 6.10 Update.

[GsmToto]

Selected model: Huawei Mediatek
Operation: Erase FRP
Software version: 6.10

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM49 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x90982D35, 0x918A6A68, 0x70AAAFF8, 0x3A5D3DMMM
Get Chip ID... [MT6768]
Get SOC ID... [05E1DA75849F752BC569D03C951F8D3062005688D31B62AD15 83B5B6F84430A3]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [8]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x13014E47324D323132102A8C91116D5N
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: G2M212
EMMC_ID : 0x13014E47324D323132102A8C91116D5N
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x1D1F000000 (116.48Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : HONOR
Product Manufacturer : alps
Product Model : k69v1_64_6382_k419
Product Name : vnd_k69v1_64_6382_k419
Product Device : HNCRT-M1
Product Board : CRTL
Board Platform : mt6768
Build ID : SKQ1.210908.001
Build Date : Mon Oct 30 15:37:12 CST 2023
Display ID : System 6.1.0(0KOW)
Security Patch : 2023-11-01
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : eng.root.20231030.151011
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Huawei_MT6768/FRP_BACKUP_(2024-6-4_04-43-23)/
Writting FRP data... OK
Erase FRP done!

 

[GsmToto]

Selected model: Spreadtrum Spreadtrum
Operation: Unlock network
Software version: 6.10

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM3
Port: USB\VID_1782&PID_4D00\7&DC8AD04&0&6
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: SC9863A
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 747336305331
Read partitions info... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : ZTE
Product Manufacturer : ZTE
Product Model : P652
Product Name : Z6356O_1
Product Device : P963F61
Product Board : s9863a1h10_go_32b
Board Platform : sp9863a
Build ID : RP1A.201005.001
Build Date : Sat Aug 26 16:03:02 CST 2023
Display ID : P652_M05
Security Patch : 2023-08-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 20230826.151338
Userdata FS Type : F2FS
Check security state... OK [1]
Unlock bootloader... OK
Patch modem check... OK
Patch data... OK
Load NVD... OK
Unlock... OK
Save NVD... OK
Done!

 

[ARGSMTEAM]

plz vivo update da blacklist fix..................... pandora team maybe sleeping ? plz update vivo latest security .

 

[GsmToto]

Selected model: TCL T607DL (TCL Ion V)
Operation: Unlock network
Software version: 6.10

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM2 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000007]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xD27818CB, 0x94B11FE5, 0xFC3063DA, 0xA6B3E822
Get hw mode... OK
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
EMMC_ID: 0x150100445836384D42095F24CC1C11JV
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [7]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DX68MB
EMMC_ID : 0x150100445836384D42095F24CC1C11JV
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0000400000 (4,00Mb)
EMMC_USER : 0x0747C00000 (29,12Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232,00Kb)
EXT_RAM : 0x00C0000000 (3,00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM disabled !!!
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TCL
Product Manufacturer : TCL
Product Model : T607DL
Product Name : T607DL
Product Device : Bora_TF
Product Board : boratf
Board Platform : mt6765
Build ID : SP1A.210812.016
Build Date : Fri Feb 2 18:00:59 CST 2024
Display ID : TP1A.220624.014
Security Patch : 2024-02-01
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : UHB7
Userdata FS Type : F2FS
Read security partition from phone... OK
Read security partition from phone...
Decrypting security data... OK
Encrypt security data... OK
Read security files... OK
Read NVDATA files... OK
Calculating... OK
Read lock info... OK
Read OTP... OK
Patch data... OK
Unlock... OK [DF1_T2, DF2, GB1_03, GB2, PTCH]
Write lock info... OK
Selected "Auto unlock bootloader"
Read security partition from phone... OK
Write security partition to phone... OK
Unlock bootloader done!
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Formatting "md_udc" partition... OK
Write security partition to phone... OK
Network Unlock done!

 

[jadoon]

PANDORA Z3X TEAM VIVO new update security solutions PANDORA Z3X TEAM

 

[GsmToto]

Selected model: Infinix X669 (Infinix Hot 30i NFC)
Operation: Erase FRP
Software version: 6.10

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM30
Port: USB\VID_1782&PID_4D00\6&17B2F180&0&2
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: INFINIX/Tiger_T606_64&X669
Load files... (INFINIX/X669) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 100478633367776
Flash Type: UFS
Read partitions info... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : Infinix
Product Manufacturer : INFINIX
Product Model : Infinix X669
Product Name : X669-GL
Product Device : Infinix-X669
Product Board : Infinix-X669
Board Platform : ums9230
Build ID : SP1A.210812.016
Build Date : Mon Apr 8 17:57:16 CST 2024
Display ID : X669-F065FGHIJK-S-GL-20240408V933
Security Patch : 2024-04-05
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : GL-20240408V933
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Done!

 

[GsmToto]

Selected model: Spreadtrum Spreadtrum
Operation: Erase FRP
Software version: 6.10

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM2
Port: USB\VID_1782&PID_4D00\6&2A6CA225&2&2
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: SC9863A
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 4909605778902231
Read partitions info... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : ZTE
Product Manufacturer : ZTE
Product Model : ZTE Blade A54
Product Name : P963F64
Product Device : P963F64
Board Platform : sp9863a
Build ID : TP1A.220624.014
Build Date : Tue Nov 21 11:45:33 CST 2023
Display ID : MyOS13.0.2_A54_LA
Security Patch : 2023-11-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 20231121.101558
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Done!

 

[GsmToto]

Selected model: Realme RMX3710 (Realme C55)
Operation: Erase FRP And Wipe
Software version: 6.10
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x08F2324F, 0x143E05CB, 0x7DF8CA34, 0x62EAC743
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
EMMC_ID: 0x9B010059305332353600751B211C4675
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [8]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: Y0S256
EMMC_ID : 0x9B010059305332353600751B211C4675
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x3A3E000000 (232,97Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : realme
Product Manufacturer : realme
Product Model : RMX3710
Product Name : RMX3710
Product Device : REE2ADL1
Product Board : k69v1_64_k419
Board Platform : mt6768
Build ID : SP1A.210812.016
Build Date : Sat Sep 9 12:16:50 CST 2023
Display ID : RMX3710_11_A.61
Security Patch : 2023-09-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : T.R4T2.1121e7f_511
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Realme_RMX3710%20(Realme%20C15)/FRP_BACKUP_(2024-6-11_05-12-43)/
Writting FRP data... OK
Formatting "userdata" partition... OK
Formatting "metadata" partition... OK
Formatting "md_udc" partition... OK
Wipe data done!

 

[GsmToto]

Selected model: Spreadtrum Spreadtrum
Operation: Read Flash Info
Software version: 6.10

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to NONE... OK
Connect phone to [PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM2
Port: USB\VID_1782&PID_4D00\6&4B84C93&0&10
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T606_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: S685073B0904320S0010
Flash Type: UFS
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : FreeYond
Product Manufacturer : FreeYond
Product Model : 2308005M
Product Name : M6_EEA
Product Device : M6
Board Platform : ums9230
Build ID : TP1A.220624.014
Build Date : Mon Nov 13 17:37:24 CST 2023
Display ID : FreeYond_M6_EEA_S6163A_20231113V02
Security Patch : 2023-10-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 46138
Userdata FS Type : F2FS
Done!

 

[GsmToto]

Selected model: Mediatek Mediatek
Operation: Erase FRP
Software version: 6.10
Work ID: 30846722

Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 6580
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6580]
Library Version [1]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Load DownloadAgent... OK
ME_ID = 0xD4, 0x29008758, 0xA631E8F4, 0x8AC4EE4E
Get BROM version... OK
Search DA... OK [26]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Checking bootloader answer... OK
Wait for answer from bootloader... OK
Wait for hw detection... OK
Wait DA version... v4.2
Send BROM version... OK
Send storage config... OK
SyncBmtInfoWithDA... OK
Set params... OK
Read flash info... OK
EMMC_ID: 0x460001154D3270042B373009A32370C1
Load EMI from phone... OK
Init DRAM... OK
Enable DRAM... OK
Sync with DA... OK
Wait for DA H/W detection... OK
EMMC INFO:
EMMC_CNAME: F722MB
EMMC_ID : 0x15010046373200170C9A0073B32324D4
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0000080000 (512,00Kb)
EMMC_USER : 0x01D2000000 (7,28Gb)
RAM INFO:
INT_SRAM: 0x0000020000 (128,00Kb)
EXT_RAM : 0x0040000000 (1,00Gb)
Checking USB status... USB_FULL_SPEED
Switching to USB high speed... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek DA USB VCOM (Android),usb2ser.sys,3.0.1504.0]
High Speed USB detected at COM3
Open port... OK
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : BLU
Product Manufacturer : BLU
Product Model : BLU ENERGY X PLUS 2
Product Name : BLU_ENERGY_X_PLUS_2
Product Device : BLU_ENERGY_X_PLUS_2
Product Board : mt6580
Board Platform : mt6580
Build ID : E150Q
Build Date : Tue Aug 8 20:24:55 CST 2017
Display ID : BLU_E150Q_V26_GENERIC
Security Patch : 2017-08-05
Version SDK : 23
Version Release : 6.0
Version Codename : REL
Firmware Version : 1502126933
Read partition frp... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Mediatek_MT6580/FRP_BACKUP_(2024-6-15_197-23-37)/
Writting FRP data... OK
Erase FRP done!

 

[aliipi]

pandora team services down .........


Selected model: Infinix X6833B (Infinix Note 30)
Operation: Erase FRP
Software version: 6.10

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1633 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM9 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 1208
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6789]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x28D68576, 0x5B399E30, 0x45DFD7DB, 0xDCF4FE0E
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... error(DA_INIT_KEY_FAIL). Secure DA agent not compatible for this preloader.
Try select other DA type.

===================================================================
Selected model: Infinix X6833B (Infinix Note 30)
Operation: Erase FRP
Software version: 6.10

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1633 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM9 [PRELOADER]
Open port... error


Selected model: Infinix X6833B (Infinix Note 30)
Operation: Erase FRP
Software version: 6.10

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1633 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM9 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 1208
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6789]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x28D68576, 0x5B399E30, 0x45DFD7DB, 0xDCF4FE0E
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... error(DA_INIT_KEY_FAIL). Secure DA agent not compatible for this preloader.
Try select other DA type.

 

[GsmToto]

Selected model: Samsung SM-A037F (Galaxy A03s)
Operation: Write TAR
Software version: 6.10

Extract scatter file... OK
Parse scatter file... OK
Load Rom Images... OK
Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to BOX in BROM/PRELOADER Mode
Wait for device connecting... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM2 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Wait for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Advanced Bypass Security... OK
Disconnect virtual port... OK
Connect Type-C to HUB... OK
Wait for device connecting... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM2 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x489F8380, 0xEA0E7DF8, 0x352E8D1A, 0x4A9498C9
Get Chip ID... [MT6765]
Get SOC ID... [FAC12D8575306F695654B8B878D0D1DDF 93E3D6D6008EB93FAABBCD7DC1F6B77]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Check preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150344D42055606972D6889100525036
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_ID : 0x150344D42055606972D6889100525036
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Get scatter info... OK
Check USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Check A/B state... OK
Read product info... OK
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-A037F
Product Name : a03snnxx
Product Device : a03s
Product Board : hs03s
Board Platform : MT6765
Build ID : RP1A.200720.012
Build Date : Wed Oct 27 17:31:37 KST 2021
Display ID : RP1A.200720.012.A037FXXU1AUJ2
Security Patch : 2021-09-01
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : A037FXXU1AUJ2
Partition "userdata" changed...skip
Get scatter info... OK
Verify scatter file... OK
Do NAND BMT remark... OK
Setup download info... OK
Get partition table catagory... OK [GPT]
Read mirror partition table... OK
Generate mirror partition table... OK
Download mirror partition table... OK
Read major partition table... OK
Check major partition table layout changed... OK
Download "preloader"... OK
Download "spmfw"... OK
Download "scp1"... OK
Download "sspm_1"... OK
Download "tee1"... OK
Download "tzar"... OK
Download "gz1"... OK
Download "lk"... OK
Download "dtbo"... OK
Download "vbmeta"... OK
Download "md1img"... OK
Download "param"... OK
Download "up_param"... OK
Download "boot"... OK
Download "recovery"... OK
Download "vbmeta_system"... OK
Download "efuse"... OK
Download "super"... OK
Download "prism"... OK
Download "optics"... OK
Download "cache"... OK
Download "omr"... OK
Download "userdata"... OK
Download "PIT"... OK
Flashing done!

 

[GsmToto]

Selected model: Tecno BF6 (Tecno Pop 7)
Operation: Erase FRP
Software version: 6.10

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM2
Port: USB\VID_1782&PID_4D00\6&17B2F180&0&2
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: SC9863A_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 09712153B3324567433
Read partitions info... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO
Product Model : TECNO BF6
Product Name : BF6-OP
Product Device : TECNO-BF6
Product Board : BF6
Board Platform : sp9863a
Build ID : SP1A.210812.001
Build Date : Fri Jan 19 19:41:04 CST 2024
Display ID : BF6-SE668SABCDE-SGo-OP-240119V733
Security Patch : 2024-01-05
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : 240119V733
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Done!

 

[GsmToto]

Selected model: Tecno CG8 (Tecno Camon 17 Pro)
Operation: Eliminar FRP
Software version: 6.10

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Connect phone to [BOX] in BROM mode
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0813
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6785]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0813
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6785]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xA60239AE, 0xB4258E2D, 0x50D5CAS6, 0x525637S6
Get Chip ID... [MT6785]
Get SOC ID... [1602AC7549546301A0EDCBC4B45F645FF 8AE8264B9EC5C6225C4A660B26F72BD]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [12]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
UFS CID (FW VER): H9HQ21AFAHTBX (A002)
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : H9HQ21AFAMSNYW
UFS_FWVER : A002
BLOCK_SIZE: 0x0000001000 (4,00Kb)
UFS_LU0 : 0x0000400000 (4,00Mb)
UFS_LU1 : 0x0000400000 (4,00Mb)
UFS_LU2 : 0x3B96000000 (238,34Gb)
RAM INFO:
INT_SRAM: 0x0000080000 (512,00Kb)
EXT_RAM : 0x0200000000 (8,00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO MOBILE LIMITED
Product Model : TECNO CG8
Product Name : CG8-GL
Product Device : TECNO-CG8
Product Board : TECNO-CG8
Board Platform : mt6785
Build ID : RP1A.200720.011
Build Date : Fri Mar 3 20:37:07 CST 2023
Display ID : TECNO-R-64-230303V657
Security Patch : 2023-03-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 230303V711
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Tecno_CG8%20%20(Tecno%20Camon%2017%20Pro)/FRP_BACKUP_(2024-6-24_20-33-12)/
Writting FRP data... OK
Erase FRP done!

 

[GsmToto]

Selected model: Xiaomi Redmi Note 10S (Rosemary)
Operation: Eliminar FRP
Software version: 6.10

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Connect phone to [BOX] in BROM mode
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0813
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6785]
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM2 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0813
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6785]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xDBBB8453, 0x0AAF4F98, 0x4963BC76, 0xCDBF9B23
Get Chip ID... [MT6785]
Get SOC ID... [0AF9BFEC7641460622425202F83E76A3BB8F C3650550D446F1958EF7ADEABDFF]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [12]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
UFS CID (FW VER): MT128GASAO4U33 (0605)
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : MT128GASAO4U33
UFS_FWVER : 0605
BLOCK_SIZE: 0x0000001000 (4,00Kb)
UFS_LU0 : 0x0000400000 (4,00Mb)
UFS_LU1 : 0x0000400000 (4,00Mb)
UFS_LU2 : 0x1DCB000000 (119,17Gb)
RAM INFO:
INT_SRAM: 0x0000080000 (512,00Kb)
EXT_RAM : 0x0180000000 (6,00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : Redmi
Product Manufacturer : Xiaomi
Product Model : rosemary
Product Name : rosemary
Product Device : rosemary
Product Board : rosemary
Board Platform : mt6785
Build ID : SP1A.210812.016
Build Date : Sat Oct 7 08:24:53 UTC 2023
Display ID : TP1A.220624.014
Security Patch : 2023-10-01
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : V14.0.8.0xxxxxxxXM
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Xiaomi_Redmi%20Note%2010S%20(Rosemary)/FRP_BACKUP_(2024-6-24_21-16-22)/
Writting FRP data... OK
Erase FRP done!

 

[shivram]

LOT OF ERRORS SO BUGYYYYYYYYY

Selected model: Realme RMX3624 (Realme C33)
Operation: Read Flash Info
Software version: 6.10

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM31
Port: USB\VID_1782&PID_4D00\6&1D81DCF2&4&2
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T612_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... error(42)

 

[Rasheed2020]

PB is the most behind of all software tools in terms of giving major updates......the most expensive and yet very slow updates

 

[GsmToto]

Selected model: Tecno CH6is (Tecno Camon 19 Neo)
Operation: Unlock network
Software version: 6.10

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Connect phone to [BOX] in BROM mode
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0707
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x54059634, 0x41332AFA, 0x669C87A0, 0xE54D52D1
Get Chip ID... [MT6768]
Get SOC ID... [7FD8E0CBD467892A8633B665082CD27E35F692DA394990EF05 AC52511AF21257]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [8]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150124202668790D089BB00335636434Z
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: 3V6CBB
EMMC_ID : 0x150100202668790D089BB33563643424X
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x1D1EC00000 (116,48Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO
Product Model : TECNO CH6IS
Product Name : CH6IS-GTTG
Product Device : TECNO-CH6IS
Product Board : TECNO-CH6IS
Board Platform : mt6768
Build ID : SP1A.210812.016
Build Date : Fri Nov 11 15:25:31 CST 2022
Display ID : TECNO-S-64-221110V86
Security Patch : 2022-09-05
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : 221111V122
Userdata FS Type : F2FS
Read security partition from phone... OK
Read security files... OK
Read NVDATA files... OK
Calculating... OK
Read lock info... OK
Unlock... OK [DF1, UN]
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!

 

[GsmToto]

Flash : Writ Firmware cfg OK
Selected model: Nokia TA-1352 (Nokia C20)
Operation: Flash
Software version: 6.10
Work ID: 33693611

Loading files... OK
Init partition data... OK
Init files... OK
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM2
Port: USB\VID_1782&PID_4D00\5&2108AD5D&0&3
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Load files... OK
Selected processor: SC9863A_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: E645421211248924
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : Nokia
Product Manufacturer : HMD Global
Product Model : COS
Product Name : Cosmo_00WW
Product Device : COS
Product Board : Cosmo
Board Platform : sp9863a
Build ID : RP1A.201005.001
Build Date : Fri Oct 14 10:03:14 UTC 2022
Security Patch : 2022-10-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 00WW_1_84A
Userdata FS Type : F2FS
Executing _BKF_PhaseCheck...
ReadFlashByID... OK
Executing _BKF_ProdNV...
ReadFlashByID... OK
Executing _BKF_NV_LTE...
ReadFlashByID... OK
Executing _REPARTITION_...
ForceRepartitionByID... OK
Flashing NV_LTE...
ReadFlashByID... OK
DownloadByID... OK
Flashing ProdNV...
DownloadByID... OK
Flashing PhaseCheck...
DownloadByID... OK
SetTimeStamp... OK
Flashing EraseUBOOT...
EraseFlashByID... OK
Flashing EraseUBOOTLOG...
EraseFlashByID... OK
Flashing UBOOTLoader...
DownloadByID... OK
Flashing SPLLoader...
DownloadByID... OK
Flashing VBMETA...
DownloadByID... OK
Flashing VBMETA_SYSTEM...
DownloadByID... OK
Flashing VBMETA_SYSTEM_EXT...
DownloadByID... OK
Flashing VBMETA_VENDOR...
DownloadByID... OK
Flashing VBMETA_CUSTOM1...
DownloadByID... OK
Flashing VBMETA_PRODUCT...
DownloadByID... OK
Flashing Modem_LTE...
DownloadByID... OK
Flashing Modem_LTE_DELTANV...
DownloadByID... OK
Flashing DSP_LTE_LTE...
DownloadByID... OK
Flashing DSP_LTE_GGE...
DownloadByID... OK
Flashing DFS...
DownloadByID... OK
Flashing GPS_GL...
DownloadByID... OK
Flashing GPS_BD...
DownloadByID... OK
Flashing Modem_WCN...
DownloadByID... OK
Flashing BOOT...
DownloadByID... OK
Flashing DTBO...
DownloadByID... OK
Flashing Super...
DownloadByID... OK
Flashing Cache...
DownloadByID... OK
Flashing UserData...
DownloadByID... OK
Flashing BootLogo...
DownloadByID... OK
Flashing Fastboot_Logo...
DownloadByID... OK
Flashing Socko...
DownloadByID... OK
Flashing Odmko...
DownloadByID... OK
Flashing FLASH_LTE...
EraseFlashByID... OK
Flashing EraseMisc...
EraseFlashByID... OK
Flashing EraseSysdumpdb...
EraseFlashByID... OK
Flashing Trustos...
DownloadByID... OK
Flashing Teecfg...
DownloadByID... OK
Flashing SML...
DownloadByID... OK
Flashing Persist...
DownloadByID... OK
Flashing EraseMetadata...
EraseFlashByID... OK
Flashing done!

 

[GsmToto]

Operation: Repair
Software version: 6.10
Work ID: 33560244

Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM2 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 1066
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6781]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM2 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 1066
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6781]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x47BD5B5F, 0x081E850B, 0x4238A68B, 0xE02829F8
Get Chip ID... [MT6781]
Get SOC ID... [00B98B01B10E993052EA2F8BD65BC1 24AF743FD4AF6BD31A1FACC1018548BCEC]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [11]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
UFS CID (FW VER): KM8L9001JM-B624 (0300)
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : KM8L9001JM-B624
UFS_FWVER : 0300
BLOCK_SIZE: 0x0000001000 (4.00Kb)
UFS_LU0 : 0x0000400000 (4.00Mb)
UFS_LU1 : 0x0000400000 (4.00Mb)
UFS_LU2 : 0x1DCB000000 (119.17Gb)
RAM INFO:
INT_SRAM: 0x0000060000 (384.00Kb)
EXT_RAM : 0x0200000000 (8.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : Redmi
Product Manufacturer : Xiaomi
Product Model : viva
Product Name : viva_global
Product Device : viva
Product Board : viva
Board Platform : mt6781
Build ID : SP1A.210812.016
Build Date : Fri Jul 22 17:23:52 CST 2022
Display ID : viva-user 12 SP1A.210812.016 V13.0.2.0.SGDMIXM
Security Patch : 2022-07-01
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : V13.0.2.0.SGDMIXM
Userdata FS Type : F2FS
Read security partition from phone...
Decrypting security data... OK
Encrypt security data... OK
Read partition "nvdata"... OK
Read partition "protect1"... OK
Read partition "nvram"... OK
Read NVDATA files... OK
Read NVRAM files... OK
Read security files... OK
Calculating... OK
Read IMEI... error
Repairing IMEI...
IMEI 1: 865XXXXXXXXXXXX
IMEI 2: 865XXXXXXXXXXXX
Write IMEI and patch CERT [NVDATA]... OK
Load partiton for patching... OK
Patching... OK
Selected "Auto unlock bootloader"
Read security partition from phone... OK
Write security partition to phone... OK
Unlock bootloader done!
Selected "Disable VBMETA verification"
Read security partition from phone... OK
Write security partition to phone... OK
Write IMEI and patch CERT [NVRAM]... OK
Write partition "nvdata"... OK
Write partition "nvram"... OK
Repair Security and Patch cert done!
If your phone after repair keeps rebooting - use wipe data option.