Z3X Pandora PRO 6.10 Update.

[SPYROS]

Pandora PRO 6.10 Update. New devices added


Added support TCL phones:

-T607DL TCL Ion V
-T608DL TCL 40 T


Added support Vortex phones:

- HD65 Ultra
- HD65 Choice
- HD65 Select
- CM62
- CG65
- CMG101
- HD65 PLUS
- T10M


Added support Bmobile phones:

- AX754+
- AX1073+


Added support Blackview phones:

- Blackview Color 8
- Oscal Pad 7
- Oscal Pad 80 WiFi
- Tab 90 WiFi
- Tab 16 Pro


Added support ZTE phones:

- Z6351O P650 Pro
- Z6355O P651 2021
- Z6556O A71 5G
- Z6621O Optus X Vista
- Z5155T Blade A5 2019

Fixed some bugs


181.85 MB file on MEGA


DO NOT POST ANY LOGS OF JOB HERE in this thread, if you have any error - open own thread and supporters will answer there!!!

 

[GsmToto]

Selected model: TCL 6125F (TCL 20E)
Operation: Unlock network
Software version: 6.10
Work ID: 29314522

Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Install LibUSB... OK
Waiting for device... OK
Open port... OK
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x8902A89B, 0x7837C1AB, 0x6162BB5E, 0xA7E7E1A3
Get Chip ID... [MT6765]
Get SOC ID... [89775B77BDBC75EA56DF8224182B4BDCA44A04FA469873E96D 8BF0E225B6184F]
Get sec config... OK [000000E0]
Get hw mode... OK
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xEA2D00534137323131100000BA0F2G4Z
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: SA7211
EMMC_ID : 0xEA2D00534137323131100000BA0F581B
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0000400000 (4,00Mb)
EMMC_USER : 0x0E6A000000 (57,66Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : TCL
Product Manufacturer : TCL
Product Model : 6165H
Product Name : 6165H_EEA
Product Device : Cruze_Pro
Product Board : MT6765
Board Platform : mt6765
Build ID : SP1A.210812.016
Build Date : Fri Aug 11 22:34:06 CST 2023
Display ID : SP1A.210812.016 release-keys
Security Patch : 2023-08-01
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : 1AD3
Userdata FS Type : F2FS
Read security partition from phone... OK
Read security partition from phone...
Decrypting security data... OK
Encrypt security data... OK
Read security files... OK
Read NVDATA files... OK
Calculating... OK
Read lock info... OK
Read OTP... OK
Unlock... OK [DF1, DF2]
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!

 

[MOHAMED_GSM]

 

[GsmToto]

Selected model: Spreadtrum Spreadtrum
Operation: Erase FRP
Software version: 6.10

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM3
Port: USB\VID_1782&PID_4D00\6&18B88C3&3&2
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: SC9863A
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 751522101000
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : ZTE
Product Manufacturer : ZTE
Product Model : ZTE Blade A53 Pro
Product Name : P963F63_2
Product Device : P963F63
Product Board : s9863a1h10
Board Platform : sp9863a
Build ID : SP1A.210812.016
Build Date : Thu Mar 30 01:56:27 CST 2023
Display ID : MyOS12.0.0_A53Pro_LA
Security Patch : 2023-03-05
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : 20230330.00747473
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Done!

 

[GsmToto]

Selected model: Vivo PD2279F (Vivo Y36 5G)
Operation: Repair
Software version: 6.10
Work ID: 2368953211

Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
Library Version [2]
Select platform... OK
Init BROM... OK5
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xA2ADCD81, 0x338C384E, 0xB1966962, 0x372643367
Load DownloadAgent... OK
Search DA... OK [7]
Send bootloader... error(DA_IN_BLACKLIST)

 

[samsameer]

Send bootloader... error(DA_IN_BLACKLIST)..........solution

 

[GsmToto]

Selected model: Tecno KI5K (Tecno Spark 10C)
Operation: Erase FRP
Software version: 6.10

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM2
Port: USB\VID_1782&PID_4D00\6&17B2F180&0&2
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T612_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 09878553AD106233
Flash Type: UFS
Read partitions info... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO
Product Model : TECNO KI5k
Product Name : KI5k-GL
Product Device : TECNO-KI5k
Product Board : TECNO-KI5k
Board Platform : ums9230
Build ID : SP1A.210812.016
Build Date : Mon Mar 4 13:08:40 CST 2024
Display ID : KI5k-F065ABCDEAgAh-S-GL-20240304V511
Security Patch : 2024-03-05
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : GL-20240304V511
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Done!

 

[GsmToto]

Selected model: Spreadtrum Spreadtrum
Operation: Erase FRP
Software version: 6.10
Work ID: 293355711

Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM2
Port: USB\VID_1782&PID_4D00\5&2301DF1D&0&2
Driver: [DriverCoding Corporation,sprdvcom,SPRD U2S Diag,sprdvcom.sys,2.0.0.131]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T700_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: V10MPG500325711
Read partitions info... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : Vonino
Product Manufacturer : Vonino
Product Model : Magnet_G50
Product Name : Magnet_G50_EEA
Product Device : Magnet_G50
Product Board : Magnet_G30
Board Platform : sprd9863_10.0
Build ID : QP1A.190711.020
Build Date : Fri Nov 11 04:12:20 CST 2022
Display ID : v10.1.4G_Magnet_G50_111121167
Security Patch : 2022-10-05
Version SDK : 29
Version Release : 10
Version Codename : REL
Firmware Version : sy202213357
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Done!

 

[GsmToto]

Selected model: Tecno CC6 (Tecno Camon 12 Air)
Operation: Read Flash Info
Software version: 6.10
Work ID: 2578995411

Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x2A8AA2CB, 0xCC86199D, 0xED2F254E, 0x5DF174114
Get Chip ID... [MT6765]
Get SOC ID... [C0FB70D667DCE8AAD5ED7BB5DBC3E4AEEE637EA3D0145A3EE3 EB7046F979EE33]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x90014A6843396150330196880D33GN
Load EMI config from database [DB VER: 222 DB DATE: 11-13-2023] OK [1]
Trying EMI [1BB1F176, 8B379E64, E1B3CCEC, 92392267, 7CE2E8FA, BCFFEFAA, 9C47C7D7, 7D005327, C27E8331, CA96141A, 33555203, CCFE52E9, F6A9B5C6, FBFAE101]
Init EXT RAM... error(STATUS_EMI_SETTING_VERSION_ERROR)

 

[GsmToto]

Selected model: Vivo V2217 (Vivo Y02)
Operation: Erase FRP
Software version: 6.10

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xFF568CDC, 0x0C9A98C3, 0x8F7B234A, 0x7806D3MN
Load DownloadAgent... OK
Search DA... OK [2]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
EMMC_ID: 0x9B010059325030333200EAAA03254933
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [7]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: Y2P032
EMMC_ID : 0x9B010059325030333200EAAA03254933
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM disabled !!!
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : vivo
Product Manufacturer : vivo
Product Model : V2217
Product Name : V2217
Product Device : V2217
Product Board : k62v1_32_bsp_2g_ago
Board Platform : mt6765
Build ID : SP1A.210812.003
Build Date : Tue Aug 1 14:49:44 CST 2023
Display ID : SP1A.210812.003 release-keys
Security Patch : 2023-08-01
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : compiler08011438
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Vivo_V2217%20(Vivo%20Y02)/FRP_BACKUP_(2024-5-23_11-13-54/
Writting FRP data... OK
Erase FRP done!

 

[GsmToto]

Selected model: Tecno CK6n (Tecno Camon 20)
Operation: Read Flash Info
Software version: 6.10
Work ID: 295354885

Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM6 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xCB1CB22C, 0x6F05475A, 0xF55ED9AE, 0x422FENH
Load DownloadAgent... OK
Search DA... OK [4]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... error(STATUS_SEC_INVALID_DA_VER)

 

[GsmToto]

Selected model: Realme RMX3261 (Realme C21Y)
Operation: Erase FRP And Wipe
Software version: 6.10

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM2
Port: USB\VID_1782&PID_4D00\6&2A6CA225&2&2
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T610_64
Load files... (REALME/RMX3261) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 00216D401A27292010HA4410M
Read partitions info... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : realme
Product Manufacturer : realme
Product Model : RMX44106
Product Name : RMX44106
Product Device : RMX44106
Product Board : RMX44106
Board Platform : ums512
Build ID : RP1A.201005.001
Build Date : Fri Dec 1 22:46:23 CST 2023
Display ID : RMX3261_11_A.115
Security Patch : 2023-12-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 17014420864311
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Creating default filesystems... [CACHE: EXT4] ... [USERDATA: F2FS] ... OK
Done!

 

[GsmToto]

Selected model: Tecno CK6 (Tecno Camon 20)
Operation: Read Flash Info
Software version: 6.10
Work ID: 273267112

Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0788
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x751DC446, 0xEB2DBB63, 0xECD2B3BE, 0xF3EE31134
Load DownloadAgent... OK
Search DA... OK [4]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... error(STATUS_SEC_INVALID_DA_VER)

 

[GsmToto]

Selected model: Infinix X6516 (Infinix Smart 7 HD)
Operation: Repair
Software version: 6.10
Work ID: 29311789

Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM3
Port: USB\VID_1782&PID_4D00\5&11B683D3&0&9
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: SC9863A
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 202312182334681
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : Infinix
Product Manufacturer : INFINIX
Product Model : Infinix X6516
Product Name : X6516-GL
Product Device : Infinix-X6516
Product Board : X6516
Board Platform : sp9863a
Build ID : SP1A.210812.001
Build Date : Tue Dec 12 18:45:09 CST 2023
Display ID : X6516-SE668SABCD-SGo-GL-231212V711
Security Patch : 2023-12-05
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : 231212V711
Userdata FS Type : F2FS
Load NVD...
Exception: Access violation at address 0105E566 in module PandoraTool.exe. Read of address 79D602323

 

[GsmToto]

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM2 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xD24A0D89, 0xFD25E382, 0x90BE1338, 0xB54B943E
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
EMMC_ID: 0x90014A6844456150330300C968E51242N
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [8]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: hDEaP3
EMMC_ID : 0x90014A6844456150330300C968E51242N
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x1D1F000000 (116,48Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO MOBILE LIMITED
Product Model : TECNO CE7j
Product Name : CE7j-OP
Product Device : TECNO-CE7j
Product Board : TECNO-CE7j
Board Platform : mt6768
Build ID : RP1A.200720.011
Build Date : Tue May 31 12:40:42 CST 2022
Display ID : CE7j-H693NOQ-R-OP-220531V411
Firmware Version : 220531V211
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Tecno_CE7j%20(Tecno%20Camon%2016%20SE)/FRP_BACKUP_(2024-5-28_088-45-32)/
Writting FRP data... OK
Erase FRP done!

 

[shahidm1]

the application was unable to start correctly 0xc000007b
please guide how to solve i have installed fresh windows also

 

[GsmToto]

Selected model: TCL Mediatek
Operation: Erase FRP And Wipe
Software version: 6.10
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xCBC4C490, 0x067D6D4C, 0xBDC27418, 0xFE9E60AB
Get Chip ID... [MT6765]
Get SOC ID... [028AA53035854748965468FFBB108A1B43042DD477598789C0 16387D0F76E18B]
Get sec config... OK [000000E0]
Get hw mode... OK
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xF4012241525111315815334E97C14A2M
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: ARV11X
EMMC_ID : 0xF4012241525111315815334E97C14A2M
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0E90000000 (58.25Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x00C0000000 (3.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TCL
Product Manufacturer : alps
Product Model : mssi_64_ww
Product Board : civicsrefresh
Board Platform : mt6765
Build ID : SP1A.210812.016
Build Date : Thu Nov 2 18:13:29 CST 2023
Display ID : TP1A.220624.014
Security Patch : 2023-09-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : XQAK
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/TCL_MT6765/FRP_BACKUP_(2024-6-01_9-31-11)/
Writting FRP data... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Formatting "md_udc" partition... OK
Wipe data done!

 

[GsmToto]

Selected model: Xiaomi Poco C65 (Gale)
Operation: Erase FRP
Software version: 6.10

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM2 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000007]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Read Efuse error
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... Done.

 

[GsmToto]

Selected model: Xiaomi Redmi A2+ (Water)
Operation: Erase FRP
Software version: 6.10

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Connect phone to [BOX] in BROM mode
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM1 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xAD0DE175, 0xFF78FA2D, 0xBE599D0A, 0xFC7C01CD
Get Chip ID... [MT6765]
Get SOC ID... [F9FA6098983E88E57610A02D236B1175D73AB94F260700B71A 1969CE35459102]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xD62D004D4D43363447510E47AD922AD1
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: MMC64G
EMMC_ID : 0xD62D004D4D43363447510E47AD922AD1
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x00C0000000 (3.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : Redmi
Product Manufacturer : Xiaomi
Product Model : water
Product Name : water_global
Product Device : water
Product Board : water
Board Platform : mt6765
Build ID : SP1A.210812.016
Build Date : Thu Mar 7 16:19:53 CST 2024
Display ID : 13 V14.0.25.0.TGOMIXM
Security Patch : 2024-03-01
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : V14.0.25.0.TGOMIXM
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Xiaomi_Redmi%20A2%2B%20(Water)/FRP_BACKUP_(2024-6-2_10-34-12)/
Writting FRP data... OK
Erase FRP done!

 

[GsmToto]

Selected model: Infinix X682C (Infinix Hot 10)
Operation: Erase FRP
Software version: 6.10

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Connect phone to [BOX] in BROM mode
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0707
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x5D3FC28C, 0xAA002B68, 0xC223CBC9, 0xDFA4B33X
Get Chip ID... [MT6768]
Get SOC ID... [47C9CB070005E16BB726C19E2866D790DV5C19D8ED8D82D39F B7B49723A20FCC]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [8]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100445636444142020CA1CCD3C711
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DV6DAB
EMMC_ID : 0x150100445636444142020CA1CCD3C711
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x1D1EC00000 (116.48Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : Infinix
Product Manufacturer : INFINIX MOBILITY LIMITED
Product Model : Infinix X682C
Product Name : X682C-GL
Product Device : Infinix-X682C
Product Board : Infinix-X682C
Board Platform : mt6768
Build ID : QP1A.190711.020
Build Date : Fri Jul 29 23:38:48 CST 2022
Display ID : INFINIX-Q-64-220729V280
Security Patch : 2022-07-05
Version SDK : 29
Version Release : 10
Version Codename : REL
Firmware Version : 220729V302
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Infinix_X682C%20(Infinix%20Hot%2010)/FRP_BACKUP_(2024-6-2_14-54-21)/
Writting FRP data... OK
Erase FRP done!