Legitunlocks.com
Martview RB-02

Post Success Reports Here Successfully Repaired/Dead Recovered Handset By Ufi Box

Dr.sunilsingh

Dr.sunilsingh

Friend's Martview
Aug 2, 2018
402
823
india
Skype
[email protected]
Sonork ID
1681209
Lenovo K4 Note A7010a48 Flash

Without Any Risk Of Stuck On Logo All Job Successfully Done Ufi-Box Only

RECOVER HANDSET SUCCESSFULLY ALIVE BY Dr.Research-Center-Team

8731

8732

8730








​
Dr.Research-Center-Team ​
​
 
C

cellbhai

Friend's Martview
Sep 26, 2018
344
111
OPPO A7 PATTERN AND FRP UNLOCK DONE

Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-0169
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: GP6BMB (0x475036424d42), rev: 0x01, serial number: 0x8469AC24
Manufacturing date: Sep 2018
CID: 15010047 5036424D 42018469 AC24953E
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
MasterClear [1]... Done
Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-0169
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: GP6BMB (0x475036424d42), rev: 0x01, serial number: 0x8469AC24
Manufacturing date: Sep 2018
CID: 15010047 5036424D 42018469 AC24953E
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
MasterClear [5]... Done
Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-0169
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: GP6BMB (0x475036424d42), rev: 0x01, serial number: 0x8469AC24
Manufacturing date: Sep 2018
CID: 15010047 5036424D 42018469 AC24953E
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
Clear FRP Lock... Done
Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-0169
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: GP6BMB (0x475036424d42), rev: 0x01, serial number: 0x8469AC24
Manufacturing date: Sep 2018
CID: 15010047 5036424D 42018469 AC24953E
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
ANDROID System Info:
platform: msm8953, cpu abi: arm64-v8a
manufacturer: OPPO
board: msm8953, name: CPH1901
brand: OPPO, model: CPH1901 (OPPO A7)
build model list: CPH1901 (OPPO A7)
build id: OPM1.171019.026, version: 8.1.0 Oreo (CPH1901EX_11_A.04)
build description: msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20181222.181012 release-keys
crypto state: encrypted?
Custom moviNAND command is not supported for this device(MMC51).
Detected: SAMSUNG moviNAND KMGP6000BM-BXXX/64G
 
ferouzkassim

ferouzkassim

Active Member
Oct 11, 2018
51
34
Uganda
Skype
ferouz_kassim
oppo a5s unlock password done

Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4224
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 1 bit (SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: hB8aP (0x68423861503e), rev: 0x03, serial number: 0x0644CD03
Manufacturing date: May 2019
CID: 90014A68 42386150 3E030644 CD035684
CSD: D0270032 8F5903FF FFFFFFEF 8E400042
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 2 MiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
EXT_CSD backup saved to "\\%BACKUPS%\hB8aP_0644CD03.ext_csd"

ANDROID System Info:
platform: MT6765, cpu abi: arm64-v8a
manufacturer: OPPO
board: CPH1909, name: CPH1909
brand: OPPO, model: CPH1909 (OPPO A5s)
build model list: CPH1909 (OPPO A5s)
build id: O11019, version: 8.1.0 Oreo (CPH1909EX_11_A.20)
build description: full_oppo6765_18511-user 8.1.0 O11019 1554009363 release-keys

crypto state: encrypted?


Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4224
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: hB8aP (0x68423861503e), rev: 0x03, serial number: 0x0644CD03
Manufacturing date: May 2019
CID: 90014A68 42386150 3E030644 CD035684
CSD: D0270032 8F5903FF FFFFFFEF 8E400042
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 29.12 GiB(31,268,536,320 bytes)

[Oppo] MasterClear [2]... Done
 
I

imad123

Junior Member
Dec 5, 2019
1
0
hello everyone. I had M20 (M205). it was working but there is a problem restarting every 2 minutes and sometimes every 1 minute. I removed EMMC and erased it and formatted it and rewrite full firmware but phone now is dead. I think UFI box not supported writing firmware on M20. anyone can help me please??
 
Abdullah

Abdullah

Friend's Martview
Oct 22, 2016
1,421
4,067
Pakistan
PayPal:

Donate money to this user
Redmi 5 Rosy Global Firmware Flash done with Ufi Dongle
Redmi 5 Rosy Flash done with Ufi Dongle

Firmware package: rosy_global_images_V10.3.2.0.ODAMIXM_20190705.0000.00_8.1_global
Scanning for Qualcomm HS-USB QDLoader 9008 device...
Download Port: Qualcomm HS-USB QDLoader 9008 (COM202)
Connection status: EHCI:HUB:USB 2.00 High-Speed
USB Driver: [Qualcomm Incorporated] qcusbser, version: 2.1.2.0, date: 7-8-2015
Initializing...
MSM Serial number: 0x7bcca2f7
MSM HW ID: 0x0009a0e1 (SDM450)
OEM Public Key Hash: 0x57158eaf1814d78fd2b3105ece4db18a817a08ac664a5782a925f3ff8403d39a
SBL SW version: 0
Firehose: prog_emmc_firehose_8953_ddr.mbn
hash: 4578ffe8e0c79855f51b8c34de5fb83ba48c63e6, size: 372.72 KiB
QC_IMAGE_VERSION: BOOT.BF.3.3-00228
IMAGE_VARIANT: JAADANAZA
OEM_IMAGE_VERSION: c4-miui-ota-bd38.bj
Sending firehose loader... Done
Handshaking...
Sending ping... Done
Sending configurations...
TargetName: 8953
MemoryName: eMMC
Version: 1
Firehose configured.
Storage type: eMMC
Manufacturer ID: 0x15 (Samsung)
Product name: QE63MB (0x514536334d42), rev: 0x03, serial number: 0x15CF9B2B
Capacity: 14.57 GiB(15,646,851,072 bytes)
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.56 GiB(15,634,268,160 bytes)

Processing rawprogram0.xml
Writing PrimaryGPT at 0x00000000 (34 sectors)... Done
Writing modem at 0x04000000 (172032 sectors)... Done
Writing sbl1 at 0x0C002400 (768 sectors)... Done
Writing sbl1bak at 0x0C082400 (768 sectors)... Done
Writing rpm at 0x0C102400 (341 sectors)... Done
Writing rpmbak at 0x0C182400 (341 sectors)... Done
Writing tz at 0x0C202400 (3000 sectors)... Done
Writing tzbak at 0x0C402400 (3000 sectors)... Done
Writing devcfg at 0x0C602400 (79 sectors)... Done
Writing devcfgbak at 0x0C642400 (79 sectors)... Done
Writing dsp at 0x0C682400 (32768 sectors)... Done
Writing splash at 0x14000000 (24304 sectors)... Done
Writing aboot at 0x18000000 (1176 sectors)... Done
Writing abootbak at 0x18100000 (1176 sectors)... Done
Writing boot at 0x18200000 (55247 sectors)... Done
Writing recovery at 0x1C200000 (63467 sectors)... Done
Writing system at 0x20300000 (5990303 sectors)... Done
Writing cache at 0xE4000000 (20865 sectors)... Done
Writing lksecapp at 0x114000000 (113 sectors)... Done
Writing lksecappbak at 0x114020000 (113 sectors)... Done
Writing cmnlib at 0x114040000 (418 sectors)... Done
Writing cmnlibbak at 0x114080000 (418 sectors)... Done
Writing keymaster at 0x114140000 (442 sectors)... Done
Writing keymasterbak at 0x114180000 (442 sectors)... Done
Writing cust at 0x11C000000 (756176 sectors)... Done
Writing userdata at 0x13C000000 (166403 sectors)... Done
Writing BackupGPT at NUM_DISK_SECTORS-33. (33 sectors)... Done
Applying DISK patch... Done
Reset power ... Done

Flashing completed in 7 mins 47.609 s
 
You must log in or register to reply here.
Top