Legitunlocks.com
Martview MS-2D 2D Screwdriver

Post Success Reports Here Successfully Repaired/Dead Recovered Handset By Ufi Box

Dr.sunilsingh

Dr.sunilsingh

Friend's Martview
Aug 2, 2018
402
823
india
Skype
[email protected]
Sonork ID
1681209
REALME 5 ( RMX1911 ) Remove Userlocks+Frp Lock Done Without Any Risk Of Stuck On Logo All Job Successfully Done Ufi-Box Only

RECOVER HANDSET SUCCESSFULLY ALIVE BY Dr.Research-Center-Team

8108

8102

8103


8104


8105


8106


8107


Dr.Research-Center-Team
 
  • Like
Reactions: abo anas zayan, Ngoclamgsm, Xsa-Scorpion and 3 others
Dr.sunilsingh

Dr.sunilsingh

Friend's Martview
Aug 2, 2018
402
823
india
Skype
[email protected]
Sonork ID
1681209
Last edited:
  • Like
Reactions: mohsen456, abo anas zayan and ANDROID BOSS
C

cellbhai

Friend's Martview
Sep 26, 2018
344
111
OPPO CPH 1911 PATTERN AND FRP DONE,Again and again
[ Open \\ISP Pinout picture ]
Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-0169
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x13 (Micron)
Product name: S0J9K9 (0x53304a394b39), rev: 0x10, serial number: 0x0F455983
Manufacturing date: Apr 2019
CID: 13014E53 304A394B 39100F45 598346F4
CSD: D05F0132 8F5913FF FFFFFFEF 964000A8
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 116.48 GiB(125,074,145,280 bytes)
Cache size: 2 MiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
EXT_CSD backup saved to "\\%BACKUPS%\S0J9K9_0F455983.ext_csd"
ANDROID System Info:
platform: MT6771, cpu abi: arm64-v8a
manufacturer: OPPO
board: oppo6771_18531, name: CPH1969
brand: OPPO, model: CPH1969 (OPPO F11 Pro)
build model list: CPH1985 (OPPO R15), CPH1987 (OPPO F11 Pro), CPH1969 (OPPO F11 Pro)
build id: PPR1.180610.011, version: 9 Pie (CPH1969EX_11_A.38)
build description: full_oppo6771_18531-user 9 PPR1.180610.011 eng.root.20191024.232120 release-keys
crypto state: encrypted?
crypto state: encrypted?
Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-0169
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x13 (Micron)
Product name: S0J9K9 (0x53304a394b39), rev: 0x10, serial number: 0x0F455983
Manufacturing date: Apr 2019
CID: 13014E53 304A394B 39100F45 598346F4
CSD: D05F0132 8F5913FF FFFFFFEF 964000A8
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 116.48 GiB(125,074,145,280 bytes)
[Oppo] MasterClear [1]... Done
Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-0169
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x13 (Micron)
Product name: S0J9K9 (0x53304a394b39), rev: 0x10, serial number: 0x0F455983
Manufacturing date: Apr 2019
CID: 13014E53 304A394B 39100F45 598346F4
CSD: D05F0132 8F5913FF FFFFFFEF 964000A8
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 116.48 GiB(125,074,145,280 bytes)
[Oppo] MasterClear [5]... Done
Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-0169
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x13 (Micron)
Product name: S0J9K9 (0x53304a394b39), rev: 0x10, serial number: 0x0F455983
Manufacturing date: Apr 2019
CID: 13014E53 304A394B 39100F45 598346F4
CSD: D05F0132 8F5913FF FFFFFFEF 964000A8
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 116.48 GiB(125,074,145,280 bytes)
Clear FRP Lock... Done
8289
 
  • Like
Reactions: Deepesh Sharma
Dr.sunilsingh

Dr.sunilsingh

Friend's Martview
Aug 2, 2018
402
823
india
Skype
[email protected]
Sonork ID
1681209
  • Like
Reactions: Deepesh Sharma and JITENDRAR
Dr.sunilsingh

Dr.sunilsingh

Friend's Martview
Aug 2, 2018
402
823
india
Skype
[email protected]
Sonork ID
1681209
  • Like
  • Love
Reactions: attelecom, Deepesh Sharma, saqlain46 and 1 other person
S

subhendu1

Active Member
Sep 19, 2019
23
3
oppo f5 pin lock remove done

Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: RX64MB (0x525836344d42), rev: 0x03, serial number: 0x512DD04D
Manufacturing date: Aug 2017
CID: 15010052 5836344D 4203512D D04D842E
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked

ANDROID System Info:
platform: MT6763, cpu abi: arm64-v8a
manufacturer: OPPO
board: full_oppo6763_17031, name: CPH1723
brand: OPPO, model: OPPO CPH1723 ()
build model list: OPPO CPH1723 ()
build id: N6F26Q, version: 7.1.1 Nougat (CPH1723EX_11_A.39_190924)
build description: full_oppo6763_17031-user 7.1.1 N6F26Q 1569264842 release-keys

crypto state: encrypted?
Custom moviNAND command is not supported for this device(MMC51).
Selected: [SAMSUNG] KMRX60014M-B614/32GB+LPDDR3 32Gb (BGA221)
 
You must log in or register to reply here.
Top