Legitunlocks.com
Martview RB-02

Post Success Reports Here Successfully Repaired/Dead Recovered Handset By Ufi Box

ferouzkassim

ferouzkassim

Active Member
Oct 11, 2018
51
34
Uganda
Skype
ferouz_kassim
SM-G531H SUCCESFULLY REPAIRED EFS AND OTHER FILES BY UFI
Connection status: XHCI:HUB3:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4224
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 2.8 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0xFE (Micron)
Product name: P1J95K (0x50314a39354b), rev: 0x13, serial number: 0x7271E1AB
Manufacturing date: Jul 2015
CID: FE014E50 314A3935 4B137271 E1AB7240
CSD: D07F0132 0F5913FF FFFFFFEF 924000A2
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
Cache size: 256 KiB
Partition configuration: 0x08
No boot acknowledge is sent (default)
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked

ANDROID System Info:
platform: sc8830, cpu abi: armeabi-v7a
manufacturer: samsung
board: SC7730SE, name: grandprimeve3gxx
brand: samsung, model: SM-G531H
build id: LMY48B, version: 5.1.1 Lollipop (LMY48B.FA51_G531HXXU0APB2)
build description: grandprimeve3gxx-user 5.1.1 LMY48B FA51_G531HXXU0APB2 release-keys

Internal storage: 5.47 GiB
crypto state: unencrypted
Selected: [Micron] (JWA60)MT29TZZZ8D5BKFAH-125W/8GB (BGA221)





Connection status: XHCI:HUB3:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4224
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0xFE (Micron)
Product name: P1J95K (0x50314a39354b), rev: 0x13, serial number: 0x7271E1AB
Manufacturing date: Jul 2015
CID: FE014E50 314A3935 4B137271 E1AB7240
CSD: D07F0132 0F5913FF FFFFFFEF 924000A2
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 7.28 GiB(7,818,182,656 bytes)

Re-partitioning... Done.
Writing MBR, GPT at 0x00000000-0x000043FF (34 sectors)... Done in 0.057 s
Processing file: "BL_G531HDXS0AQC1_CL1143454_QB12737076_REV01_user_low_ship.tar.md5\spl.img", size: 32 KiB...
Extracting tar spl.img... Done.
Current partition access:
Access to boot partition 1
Writing BOOT at 0x00000000-0x0007FFFF (1024 sectors)... Done in 2.173 s
Processing file: "GRANDPRIMEVE3G_EUR_OPEN.pit\GRANDPRIMEVE3G.pit", size: 5.02 KiB...
Current partition access:
Access to user area
Writing PIT at 0x00080000-0x000FFFFF (11 sectors)... Done in 0.049 s
Processing file: "BL_G531HDXS0AQC1_CL1143454_QB12737076_REV01_user_low_ship.tar.md5\sboot.bin", size: 1.50 MiB...
Extracting tar sboot.bin... Done.
Writing SBOOT at 0x00400000-0x005FFFFF (4096 sectors)... Done in 4.443 s
Processing file: "BL_G531HDXS0AQC1_CL1143454_QB12737076_REV01_user_low_ship.tar.md5\sboot2.bin", size: 1.50 MiB...
Extracting tar sboot2.bin... Done.
Writing SBOOT2 at 0x00600000-0x007FFFFF (4096 sectors)... Done in 4.441 s
Processing file: "BL_G531HDXS0AQC1_CL1143454_QB12737076_REV01_user_low_ship.tar.md5\param.lfs", size: 560 KiB...
Extracting tar param.lfs... Done.
Writing PARAM at 0x02900000-0x02AFFFFF (4096 sectors)... Done in 4.440 s
Writing boot partition config to 0x08... Done.



IMG_20181205_194836.jpg
IMG_20181205_101944.jpg
IMG_20181206_102622.jpg
 
  • Like
Reactions: hymtone, abo anas zayan, shafi_136 and 1 other person
ferouzkassim

ferouzkassim

Active Member
Oct 11, 2018
51
34
Uganda
Skype
ferouz_kassim
UFI REPAIR FAILED TO MOUNT ERRORS

IMG_20181205_194836.jpg

Connection status: XHCI:HUB3:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4224
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 2.8 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0xFE (Micron)
Product name: P1J95K (0x50314a39354b), rev: 0x13, serial number: 0x7271E1AB
Manufacturing date: Jul 2015
CID: FE014E50 314A3935 4B137271 E1AB7240
CSD: D07F0132 0F5913FF FFFFFFEF 924000A2
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
Cache size: 256 KiB
Partition configuration: 0x08
No boot acknowledge is sent (default)
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked

ANDROID System Info:
platform: sc8830, cpu abi: armeabi-v7a
manufacturer: samsung
board: SC7730SE, name: grandprimeve3gxx
brand: samsung, model: SM-G531H
build id: LMY48B, version: 5.1.1 Lollipop (LMY48B.FA51_G531HXXU0APB2)
build description: grandprimeve3gxx-user 5.1.1 LMY48B FA51_G531HXXU0APB2 release-keys

Internal storage: 5.47 GiB
crypto state: unencrypted
Selected: [Micron] (JWA60)MT29TZZZ8D5BKFAH-125W/8GB (BGA221)





Connection status: XHCI:HUB3:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4224
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0xFE (Micron)
Product name: P1J95K (0x50314a39354b), rev: 0x13, serial number: 0x7271E1AB
Manufacturing date: Jul 2015
CID: FE014E50 314A3935 4B137271 E1AB7240
CSD: D07F0132 0F5913FF FFFFFFEF 924000A2
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 7.28 GiB(7,818,182,656 bytes)

Re-partitioning... Done.
Writing MBR, GPT at 0x00000000-0x000043FF (34 sectors)... Done in 0.057 s
Processing file: "BL_G531HDXS0AQC1_CL1143454_QB12737076_REV01_user_low_ship.tar.md5\spl.img", size: 32 KiB...
Extracting tar spl.img... Done.
Current partition access:
Access to boot partition 1
Writing BOOT at 0x00000000-0x0007FFFF (1024 sectors)... Done in 2.173 s
Processing file: "GRANDPRIMEVE3G_EUR_OPEN.pit\GRANDPRIMEVE3G.pit", size: 5.02 KiB...
Current partition access:
Access to user area
Writing PIT at 0x00080000-0x000FFFFF (11 sectors)... Done in 0.049 s
Processing file: "BL_G531HDXS0AQC1_CL1143454_QB12737076_REV01_user_low_ship.tar.md5\sboot.bin", size: 1.50 MiB...
Extracting tar sboot.bin... Done.
Writing SBOOT at 0x00400000-0x005FFFFF (4096 sectors)... Done in 4.443 s
Processing file: "BL_G531HDXS0AQC1_CL1143454_QB12737076_REV01_user_low_ship.tar.md5\sboot2.bin", size: 1.50 MiB...
Extracting tar sboot2.bin... Done.
Writing SBOOT2 at 0x00600000-0x007FFFFF (4096 sectors)... Done in 4.441 s
Processing file: "BL_G531HDXS0AQC1_CL1143454_QB12737076_REV01_user_low_ship.tar.md5\param.lfs", size: 560 KiB...
Extracting tar param.lfs... Done.
Writing PARAM at 0x02900000-0x02AFFFFF (4096 sectors)... Done in 4.440 s
Writing boot partition config to 0x08... Done.
IMG_20181205_101944.jpg
IMG_20181206_102622.jpg
 
  • Like
Reactions: shafi_136 and Ahmadaim1
salar

salar

Member
Nov 9, 2018
5
2
iran
repaire imei huawei y560-u02 spreadtrum after change emmc:supper:

Using Port: SPRD U2S Diag (COM56)
Connecting to Diag port...
Power off the phone and connect USB cable.
Scanning Diag port... Done.
Detected SPRD U2S Diag (COM56)
Connection status: EHCI:HUB:HUB:USB 2.0 Full-Speed
USB Driver: [DriverCoding Corporation] sprdvcom, version: 2.0.0.114, date: 6-27-2014
Switching test mode... Done.
Scanning Diag port... Done.
Detected SPRD U2S Diag (COM56)
Connection status: EHCI:HUB:HUB:USB 2.0 Full-Speed
USB Driver: [DriverCoding Corporation] sprdvcom, version: 2.0.0.114, date: 6-27-2014
Writing imei...
imei[1]: xxx035083138132
imei[2]: xxx035083138140
Done.
 
  • Like
Reactions: waqas_ali6012003
gsm shanto

gsm shanto

Junior Member
Sep 7, 2018
4
10
Skype
gsmshanto
SAMSUNG SM-G532F DEAD RECOVER DONE BY UFi BOX







 
  • Like
Reactions: shafi_136, Ahmadaim1 and salar
salar

salar

Member
Nov 9, 2018
5
2
iran
change emmc asus t00f a500cg.
programing emmc and flash eng frimware and repair imei with ufi done.
Firmware package: CSC_Image_A500CG_20141219_2
Processing fastboot flashing on ASUS Android Bootloader Interface[0123456789]
Flashing in progress. Do not turn off the device !!!
oem start_partitioning
OKAY [ 0.986s]
Flashing /tmp/partition.tbl: partition.tbl (1.24 KiB)
sending '/tmp/partition.tbl' (1 KB)... OKAY [ 0.495s]
writing '/tmp/partition.tbl'... OKAY [ 0.753s]
oem partition /tmp/partition.tbl
OKAY [ 0.844s]
erase config
erasing 'config'... OKAY [ 16.327s]
erase system
erasing 'system'... OKAY [ 3.157s]
erase cache
erasing 'cache'... OKAY [ 1.708s]
erase data
erasing 'data'... OKAY [ 12.116s]
erase APD
erasing 'APD'... OKAY [ 8.034s]
erase ADF
erasing 'ADF'... OKAY [ 0.971s]
oem stop_partitioning
OKAY [ 0.798s]
Flashing dnx: sec-dnx_fwr.bin (96.97 KiB)
sending 'dnx' (96 KB)... OKAY [ 0.499s]
writing 'dnx'... OKAY [ 0.741s]
Flashing ifwi: sec-ifwi-prod.bin (1.94 MiB)
sending 'ifwi' (1983 KB)... OKAY [ 0.687s]
writing 'ifwi'... OKAY [ 0.905s]
Flashing boot: boot_sign.bin (8.91 MiB)
sending 'boot' (9120 KB)... OKAY [ 1.326s]
writing 'boot'... (bootloader) secure device
(bootloader) signed image
OKAY [ 1.871s]
Flashing recovery: recovery_sign.bin (10.85 MiB)
sending 'recovery' (11109 KB)... OKAY [ 1.454s]
writing 'recovery'... (bootloader) secure device
(bootloader) signed image
OKAY [ 2.098s]
Flashing fastboot: droidboot_sign.bin (12.25 MiB)
sending 'fastboot' (12540 KB)... OKAY [ 1.569s]
writing 'fastboot'... (bootloader) secure device
(bootloader) signed image
OKAY [ 2.218s]
Flashing splashscreen: splash_sign.bin (5.68 MiB)
sending 'splashscreen' (5814 KB)... OKAY [ 0.995s]
writing 'splashscreen'... (bootloader) secure device
(bootloader) signed image
OKAY [ 1.485s]
Flashing APD: APD.img (136.02 MiB)
sending 'APD' (139284 KB)... OKAY [ 13.287s]
writing 'APD'... OKAY [ 5.324s]
Flashing system: system.img (578.54 MiB)
sending 'system' (592422 KB)... OKAY [ 67.609s]
writing 'system'... OKAY [ 24.899s]
reboot
rebooting... Fastboot flashing completed in 3 mins 10.304 s
Waiting for ADB to be ready... Done.
Using Port: Intel Android Virtual Com Port (COM72)
New imei[1]: 35XXX2065224375
New imei[2]: 35XXX2065224367
Writing new imei... Done.
Rebooting device... Done.
Waiting for ADB to be ready... Done.
Synchronizing calibration data... Done.
 
  • Like
Reactions: abo anas zayan
Deepesh Sharma

Deepesh Sharma

Friend's Martview
Apr 4, 2017
1,712
3,158
India
Sonork ID
100.1614172
Samsung J2(J200G) Always Goes In Download Mode Try All Trick But Not Solved Last Reprogram
With Ufi-Box Job Done(Full Explained Image Tutor)

Always Start With Download Mode

Isp Connection With Ufi-Box

Log Before Repair Emmc(Device Life-Time Error)

Repair Emmc Restore Security Backup(Phone Backup 256Mb)

Write Pit And Bl File

After Complete Repair Log All Ok

Finally Set Alive
 
  • Like
Reactions: renzleshop, sohang kumar, shafi_136 and 9 others
ferouzkassim

ferouzkassim

Active Member
Oct 11, 2018
51
34
Uganda
Skype
ferouz_kassim
procedure??? is it identify then health status then nand test erase emmc then wrkte flash by vendor am i correct
 
You must log in or register to reply here.
Top