UMT UMT Box / PRO Modules Updates Here

[GsmToto]

Operation : FRP Reset (PL)
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM4)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&3b2b13cd&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6739 [0699] Unknwon
Details : 8A00,CB00,0002
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 8B413F524F70AE2EAAF5563D1C9B63DB
SoC ID[0] : 0D1EE27BE57F6A5B575A5575FD656C96
SoC ID[1] : 2DB11C44B6A34BC67217110D8C5E3BC1
WARNING! DA Auth is Enabled! Only Special DA will work!
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
Int. RAM : 0x0000000000020000 [128,00 KB]
Ext. RAM : 0x0000000080000000 [2,00 GB]
Flash ID : QX63AB
CID : 15010051583633414203565A0783596B
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000000400000 [4,00 MB]
USERAREA : 0x0000000747C00000 [29,12 GB]
Connected to High-Speed DA Port
Reading Partition Table...OK
Erasing FRP Data...Done
If device shows Downlaod Error msg on start,
Please Enable BROM and then Disable BROM.
[UltimateMTK2 v0.9]
Log Saved : 202114398_1855582.lo

 

[GsmToto]

evice : Xiaomi Poco M3
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM2)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1D01400 [SDM662] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB1133886E38F2198FBDE6433FCE 1D25A7B0472DD3
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM662]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SDM662, UFS, 128 GB
LU Count : 6 [0x01CB9800] [0x00000800] [0x00000800] [0x00008000] [0x00100000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4092
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi
Software : Android-Q-build-20230509213734, V14.0.2.0.SJFEUXM [Tue May 9 21:42:51 CST 2023]
Android Ver. : 12
Patch Level : 2023-04-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 9.3

 

[GsmToto]

Operation : Samsung Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM7)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00002000
OPK_DATA : 58C5414A3A35B2E6DAA9C7A3B84494DA247411000F7E9422 1BF5F1311981Z
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_054]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8953, EMMC, 32 GB
LU Count : 3 [0x03A3E000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Software : QP1A.190711.020.A115MUBU2AUD2, A115MUBU2AUD2 [Fri Apr 2 01:38:49 KST 2021]
Android Ver. : 10
Patch Level : 2021-03-01
Reset FRP... Done
Operation Finished.
QcFire Ver. 9.3

 

[GsmToto]

USING PL_EXLOIT [OPPO V2]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM7)
Device Path : \\?\usb#vid_22d9&pid_0006#5&1e6a4af9&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6877 [0959] Dimensity 900
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : E6CFCC4181CE4E10F47791C7D6E08FC1
SoC ID[0] : 08AB8F0A2E1D1AAB56B9885130EE9178
SoC ID[1] : 9CBBAE019ABD18B65F61036268F137FZ
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Loading Extension...Done
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000200000000 [8.00 GB]
Flash ID : H9QT1G6DN6X132
CID : AD0148395154314736444E3658313332
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000003B96000000 [238.34 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.1]
Log Saved : 20775213_1853318.log

 

[GsmToto]

Operation : Multi Flash
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM7)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1500900 [SM6150] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE 1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6150]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Skipping Auth...OK
Detecting Storage Type...OK
Hardware : SM6150, UFS, 64 GB
LU Count : 6 [0x00DD4000] [0x00000800] [0x00000800] [0x00008000] [0x00100000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi
Software : , V14.0.8.0.SKGMIXM [Wed Oct 18 19:46:38 CST 2023]
Android Ver. : 12
Patch Level : 2023-10-01
Processing [rawprogram0.xml]
Writing [super.img ] -> [super]...Done
Writing [vbmeta_system.img] -> [vbmeta_system_a] ...Done
Writing [metadata.img ] -> [metadata]...Done
Writing [rescue.img ] -> [rescue]...Done
Writing [userdata.img ] -> [userdata]...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram1.xml]
Writing [xbl.elf] -> [xbl_a] ...Done
Writing [xbl_config.elf] -> [xbl_config_a] ...Done
Writing [gpt_main1.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup1.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram2.xml]
Writing [xbl.elf] -> [xbl_b] ...Done
Writing [xbl_config.elf] -> [xbl_config_b] ...Done
Writing [gpt_main2.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup2.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram3.xml]
Writing [gpt_main3.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup3.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram4.xml]
Writing [aop.mbn] -> [aop_a] ...Done
Writing [tz.mbn] -> [tz_a] ...Done
Writing [hyp.mbn] -> [hyp_a] ...Done
Writing [NON-HLOS.bin] -> [modem_a] ...Done
Writing [BTFM.bin] -> [bluetooth_a] ...Done
Writing [abl.elf] -> [abl_a] ...Done
Writing [dspso.bin] -> [dsp_a] ...Done
Writing [km41.mbn] -> [keymaster_a] ...Done
Writing [boot.img] -> [boot_a] ...Done
Writing [cmnlib.mbn] -> [cmnlib_a] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64_a] ...Done
Writing [devcfg.mbn] -> [devcfg_a] ...Done
Writing [qupv3fw.elf] -> [qupfw_a] ...Done
Writing [vbmeta.img] -> [vbmeta_a] ...Done
Writing [dtbo.img] -> [dtbo_a] ...Done
Writing [imagefv.elf] -> [imagefv_a] ...Done
Writing [uefi_sec.mbn] -> [uefisecapp_a] ...Done
Writing [vendor_boot.img] -> [vendor_boot_a] ...Done
Writing [aop.mbn] -> [aop_b] ...Done
Writing [tz.mbn] -> [tz_b] ...Done
Writing [hyp.mbn] -> [hyp_b] ...Done
Writing [NON-HLOS.bin] -> [modem_b] ...Done
Writing [BTFM.bin] -> [bluetooth_b] ...Done
Writing [abl.elf] -> [abl_b] ...Done
Writing [dspso.bin] -> [dsp_b] ...Done
Writing [km41.mbn] -> [keymaster_b] ...Done
Writing [boot.img] -> [boot_b] ...Done
Writing [cmnlib.mbn] -> [cmnlib_b] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64_b] ...Done
Writing [devcfg.mbn] -> [devcfg_b] ...Done
Writing [qupv3fw.elf] -> [qupfw_b] ...Done
Writing [vbmeta.img] -> [vbmeta_b] ...Done
Writing [dtbo.img] -> [dtbo_b] ...Done
Writing [imagefv.elf] -> [imagefv_b] ...Done
Writing [uefi_sec.mbn] -> [uefisecapp_b] ...Done
Writing [logfs_ufs_8mb.bin] -> [logfs] ...Done
Writing [storsec.mbn] -> [storsec] ...Done
Writing [gpt_main4.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup4.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram5.xml]
Writing [gpt_main5.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup5.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Set Boottable Storage Drive to 1...Done
Resetting device...Done
Operation Finished.
QcFire Ver. 9.3

 

[GsmToto]

Model : MediaTek FRP
Operation : All MediaTek 2023
Searching for Phone...Found
Port: : COM7 : SAMSUNG Mobile USB Modem #2
Checking for Device...Found [Download Mode]
Reading Data from Phone...Done
Chipset : MTK6765 [HiSpeed]
Closing Session...Done
Port: : COM22 : SAMSUNG Mobile USB Modem #2
Checking for Device...Found [Download Mode]
Resetting FRP Data...Done
Closing Session...Done
Operation Finished.
Elapsed Time 00:27
[UltimateSams v0.7]
Saved to Logs\2471154_1974432.log

 

[GsmToto]

Model : Samsung
Operation : FRP Bypass [2023 New Method]
Searching for Phone...Found
Hw ID : USB\VID_04E8&PID_6860&REV_0400&Modem
Port: : COM4: SAMSUNG Mobile USB Modem #15
Checking for Device...Found [Normal Mode]
Reading Phone Information...OK
Model: : SM-A205F
IMEI: :
Software: : A205FXXSBCWC4/A205FOJMBCVL1/A205FDDSBCWC4/A205FXXSBCWC4
Product : EGY
Enabling ADB (2023 New Method)...OK
Searching for Device...Found
Brand : samsung
Model : SM-A205F
Product : a20
Device : a20
Andriod Ver. : 11
Patch Level : 2023-03-01
PDA : A205FXXSBCWC4
Bootloader : A205FXXSBCWC4
Build ID : RP1A.200720.012.A205FXXSBCWC4
Build Date : Mon Mar 27 17:32:06 +07 2023
Checking Root Status...Done
Root : No Root
Resetting FRP Lock...Done
HINT : This method work for QC/Exynos model with Security Patch < June 2023
Elapsed Time 22:55
[UltimateSams v0.7]
Saved to Logs\2485511_1666329.log

 

[GsmToto]

USING PL_EXLOIT [INFINIX V3]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM14)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&5ff8910&0&2
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 6F4B0B2F6CE62624ABECA01E08E07BA7
SoC ID[0] : 35051F2F4626234441CF101F0ACD1B66
SoC ID[1] : EEAA533074203F71DDE90A99B6F0A862
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Loading Extension...Done
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : A3A562
CID : D60103413341353632114054E62DB923
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000001CCF000000 [115.23 GB]
PRE EOL : NORMAL
Life. Est.A : 10%-20% LIFE TIME USED
Life. Est.B : UNDEFINED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.1]

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Erase Data + FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM89)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&55ce37d&0&6
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Force Enter BROM...OK
Hw ID : MT6761 [0717] Helio A20/P22/A22/A25/G25
Details : 8A00,CA01,0200
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 89E3900F9C522F16E03A2023E8E389D3
SoC ID[0] : AAF377BB39CDCCACB4C5F7C32F369BAB
SoC ID[1] : B80A0494BBB52EDC28677617D7F56EF9
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_x653_h6114.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 150100464536324D42039C92DCBBA64F [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000039000 [228.00 KB]
Ext. RAM : 0x0000000040000000 [1024.00 MB]
Flash ID : FE62MB
CID : 150100464536324D42039C92DCBBA64F
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x00000003A3E00000 [14.56 GB]
PRE EOL : NORMAL
Life. Est.A : 30%-40% LIFE TIME USED
Life. Est.B : 30%-40% LIFE TIME USED
Reading Partition Table...OK
Brand : Infinix
Manuf. : INFINIX MOBILITY LIMITED
Model : Infinix X653
Device : Infinix-X653
And. Ver. : 9
Prod. Name : H6114
Build Dt. : Wed Dec 2 16:00:35 CST 2020
Display ID : X653-H6114NOP-PGo-201202V460
Ver. Inc. : NOP-201202V460
Locale : en-US
Patch : 2020-12-05
Bootloader : LOCKED
Erasing Userdata...OK
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.1]
Log Saved : 2723411_1855123.log

 

[GsmToto]

USING PL_EXLOIT [OPPO V2]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM27)
Device Path : \\?\usb#vid_22d9&pid_0006#5&1e6a4af9&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6877 [0959] Dimensity 900
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : E6CFCC4181CE4E10F47791C7D6E08FC1
SoC ID[0] : 08AB8F0A2E1D1AAB56B9885130EE9174
SoC ID[1] : 9CBBAE019ABD18B65F61036268F137FB
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Loading Extension...Done
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000200000000 [8.00 GB]
Flash ID : H9QT1G6DN6X132
CID : AD0148395154314736444E3658313332
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000003B96000000 [238.34 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.1]
Log Saved : 2031773_1862231.log

 

[GsmToto]

Device : Vivo V11 Pro
Operation : Vivo Format FS / FRP Reset
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_029]...Done
Executing Loader...OK
SMEM Check Pass!
Detecting Storage Type...OK
Hardware : 8937, EMMC, 32 GB
Reading Partition Table...OK
Reading Device Information...OK
Android Ver. : 11
Patch Level : 2022-03-01
Formatting userdata...DonePatched OK
Resetting FRP Lock...Done
Wipe cache / userdata from Recovery and reboot.
First startup may take 2-5 minutes.
Operation Finished.
QcFire Ver. 9.3

 

[GsmToto]

Model : Oppo F17 (CPH2095)
Operation : Erase Userdata
Found Port : Qualcomm HS-USB QDLoader 9008 (COM2)
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1D01400 [SDM662] 00005100
OPK_DATA : 19CF99D55CA3B2E11EA19E52E3541DEDF01898FD9F8C40E625 48F1C7F60
Initializing Protocol...OK
Preparing Loader...Done
Sending Loader [CPH2095]...Done
Executing Loader...OK
Initializing Storage...OK
Read : Allowed
Write : Protected
Alt. Write : Allowed
Alt. Write is allowed, using Factory Format Method...Done
Erasing FRP Data...Done
Operation Finished.
QcFire Ver. 9.3

 

[GsmToto]

Device : Samsung Galaxy A52 (SM-A525F) BIT6
Operation : Samsung Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1901400 [SM6250] 00002000
OPK_DATA : 36E60270BD33E72EA2DE1D42607BFE83C90B16C4236EC83747 F7AE14535FB63Z
Initializing Protocol...OK
Using Pre-Defined Loader [SM-A525F BIT6.ufl]
Preparing Loader...Done
Sending Loader [SM-A525F BIT6]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SM6250, UFS, 128 GB
LU Count : 6 [0x01DA3400] [0x00000800] [0x00000800] [0x00000400] [0x00025800] [0x00000800]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Software : TP1A.220624.014.A525FXXS6DWK2, A525FXXS6DWK2 [Wed Nov 29 15:59:32 KST 2023]
Android Ver. : 13
Patch Level : 2023-12-01
Reset FRP... Done
Operation Finished.
QcFire Ver. 9.3

 

[GsmToto]

Model : Samsung
Operation : FRP Bypass [2023 New Method]
Searching for Phone...Found
Hw ID : USB\VID_04E8&PID_6860&REV_0400&Modem
Port: : COM5 : SAMSUNG Mobile USB Modem #44
Checking for Device...Found [Normal Mode]
Reading Phone Information...OK
Model: : SM-G950F
IMEI: : 358438742475212
Software: : G950FXXSBDUA3/G950FUWBBDTJ1/G950FXXSBDTJ1/G950FXXSBDUA8
Product : BVO
Enabling ADB (2023 New Method)...OK
Searching for Device...Found
Brand : samsung
Model : SM-G950F
Product : dreamlte
Device : dreamlte
Andriod Ver. : 9
Patch Level : 2021-01-01
PDA : G950FXXSBDUA3
Bootloader : G950FXXSBDUA3
Build ID : PPR1.180610.011.G950FXXSBDUA9
Build Date : Thu Jan 7 15:33:05 KST 2021
Checking Root Status...Done
Root : No Root
Resetting FRP Lock...Done
HINT : This method work for QC/Exynos model with Security Patch < June 2023
Elapsed Time 18:53
[UltimateSams v0.7]
Saved to Logs\2433529_19441231.log

 

[GsmToto]

USING PL_EXLOIT [VIVO V1]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM7)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&1e6a4af9&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : B8F2C44CE066B84E2BC524EE8B7EB4C4
SoC ID[0] : B670756A1E6A265C8E5E3554FCF914FE
SoC ID[1] : F4D63322B1C6168CB43C3A67DB8FACFB
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Loading Extension...Done
Int. RAM : 0x000000000003A000 [232.00 KB]
Ext. RAM : 0x00000000C0000000 [3.00 GB]
Flash ID : GP6BMB
CID : 150100475036424D4201A3DC683B58E7
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
PRE EOL : NORMAL
Life. Est.A : 10%-20% LIFE TIME USED
Life. Est.B : 10%-20% LIFE TIME USED
Reading Partition Table...OK
Prod. Model : PD2216F_EX
And. Ver. : 12
Prod. Ver. : PD2216F_EX_A_12.0.13.10.W30
Hw. Ver. : PD2216F_EXMA
Build Dt. : Mon Mar 27 23:48:53 CST 2023
Display ID : SP1A.210812.003 release-keys
Ver. Inc. : compiler03272350
Locale : en-US
Patch : 2023-03-01
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.1]
Log Saved : 27476433_1911428.log

 

[rudra9797]

We are pleased to announce
UMTv2 / UMT Pro
Innovative and Intelligent


QcFire v9.3
The Ultimate Qualcomm Tool



Supported Functions
- Read / Write Firmware
- Backup / Restore QCN
- IMEI Repair in FTM/Diag + Flash Mode
- Backup / Reset / Restore Security (EFS)
- Reset FRP (Google Factory Reset Protection)
- Format UserData
- Read Pattern Lock (Android < 6.0, Un-Encrypted Devices Only)
- Reset Locks (PIN, Password, Pattern w/o Data Loss, Un-Encrypted Devices Only)
- Enable Diag (Need OEM Unlock, May not work on BL Locked Devices)
- Reboot to EDL from Fastboot
- Reset Mi Account for Xiaomi Devices
- Disable Mi Account for Xiaomi Devices
- Factory Reset (sideload Mode) for Xiaomi Devices
- Disable / Restore Locks for Encrypted Userdata
- Motorola Boot Repair
- Xiaomi EDL Locked Device Service
- Bootloader Unlock in EDL Mode for some Xiaomi Devices
- One Click Root in EDL Mode for Generic Qualcomm Devices
- Forensic Functions (Read Contacts / Messages in EDL Mode)
- One Click Lock Reset for Vivo Phones (Encrypted Userdata)
- Factory Method for Format FS
- EDL Authentication using Xiaomi Auth App (Service Account Required)
- Xiaomi Wipe EFS in Sideload Mode
- Xiaomi IMEI Repair for RSA Protected Phones
- Xiaomi Boot Loader Unlock
- Unique Method for Vivo Reset Locks for Protected Devices
- Xiaomi EDL Auth Using UMT Server
- Xiaomi Flashing in Fastboot Mode
- Nokia Factory Firmware (nb0) Direct Flashing in EDL mode
- Oppo OFP Firmware Exctration Added
- Xiaomi Free Auth Service (bypass).
- Mi Account Reset without Relock
- Mi Account Patch on Flashing (EDL/Fastboot)
- Samsung MDM Unlock in EDL Mode
- Huawei ID Reset
- Vivo Functions in Fastboot Mode
- Universal Huawei ID Reset
- Xiaomi Sideload Reset FRP/Mi Account
- Xiaomi Sideload Firmware Update
- Xiaomi Temporary BL Unlock
- Xiaomi Enable Diag (NO ROOT)
- Samsung Lost Mode Reset in EDL Mode
- Samsung KG Bypass - NEW!!!
- Samsung Unbrick / Dead Boot Repair - NEW!!!
- Samsung TAR to Unbrick Firmware Creator - NEW!!!

Added:


ASUS
- Rog Phone 6 Pro (AI2201_D)

BQ
- Aquaris X2

Huawei
- Nova Y90 (CTR-L22)

Lenovo
- Tab 2 (TB2-X30L)
- Tab M10 (TB-X605M)
- Tab M10 5G (TB-X607Z)
- Legion Y700
- Legion Y70 (L71091)

LG
- Q92 5G
- Velvet 5G
- Wing 5G

Meizu
- E3 (M851Q)

Motorola
- One Fusion Plus

Samsung
- Galaxy A23 5G (SM-A236E) BIT4
- Galaxy A52 5G (SM-A526U) BIT7
- Galaxy A70 (SM-A705X)
- Galaxy S20 FE (SM-G780G) BIT8
- Galaxy S20 FE 5G (SM-G781B) BIT7

TCL
- 10 Plus (T782H)

Vestel
- Venus Z20

ZTE
- nubia Red Magic 7S Pro (NX709S)




Added Samsung KG Bypass
- You can flash or downgrade to lower version with same BIT
- It will allow you to flash your phone even if flashing blocked due to KG/MDM
- This function is available in Samsung Special group

Added Samsung TAR to Unbrick Firmware Converter
- No need to extract/rename file one by one
- It will extract all required files in selected folder
- You can use this extracted in QcFire Flash Tab > Samsung Unbrick group to repair dead boot devices
- Always use same or higher BIT firmware for successfull unbrick operation

Added Samsung Unbrick Function
- It can unbrick devices even with completely erased flash and erase partition table
- Just select PIT file from Unbrick_Fw folder created by TAR to Unbrick Converter
- Tick ReCreate Partition Table only if partiton table is destroyed or fully erased

Some Minor Cosmetic Changes in GUI






CONNECTION METHOD:
Method to connect some Samsung Devices is already in Log.
For newer devices, do the following:
- Hold VOL UP + DOWN on Device.
- Hold Button on EDL Cable.
- Insert Cable to Device while holding EDL Cable Button.
- Now rapidly click both VOL UP + DOWN at the same time.
- Once you have clicked VOL UP + DOWN more than 3 times, leave EDL Cable Button but keep rapidly clicking VOL UP + DOWN.
- Stop clicking VOLUME Buttons once device is connected in EDL Mode.






Special thanks to all our users who helped us with their test reports.



Please use UMT Card Manager to Update Card Counter / Firmware / Activate Add-on, available via Support Access.



It Has Begun...
Keep Following Us...
Some Nice Updates Are On The Way...


SPECIAL THANKS TO OUR VALUABLE USERS FOR THEIR LOVE AND SUPPORT FOR MORE THAN 8 YEARS



WARNING :
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.


ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.

STATUTORY WARNING - READ CAREFULLY
Using International Edition of our software is prohibited by Indian Law.
We strictly advice you to use Indian Edition if you are in India.
If you use International Edition in India, it may cause legal action against you by local law enforcement agencies.
We will not be liable for any loss or damaged caused.



How to Download:
- Download UMT Support Access.
- Connect UMT Box/Dongle to PC and Run UMT Support Access.
- Download required Executable from Installer folder.
- Enjoy!
- Download Mirrors



PLEASE DO NOT POST OFF TOPIC HERE. ONLY POST REGARDING THIS UPDATE AND SUPPORTED MODELS. ANY OFF TOPIC POST WILL BE DELETED

Telegram

U.M.T (c) Official Support Chat


Br,
UMT
fake update by umt team

 

[SPYROS]

UMTv2 / UMT Pro
Innovative and Intelligent


UltimateMTK2 v1.2
The Ultimate MediaTek Tool

What's New:

Added Vivo Demo Reset (New)
- Tested on Vivo T2x 5G and Y28 5G


Added Vivo Demo Reset (Old)
- For devices not supported by New Method


Added Samsung Unbrick and TAR Flashing
- Simple and Easy way to Unbrick Samsung Devices
- NO NEED OF UNBRICK FIRMWARE ANYMORE
- Supports Completely Formatted Flash Chips
- Creation GPT on the fly if it is Erased
- No need to use Odin to flash after Unbrick if used BL/AP/CP/CSC
- Flashing any Single TAR is supported if GPT is intact
- Incase of fully formatted flash chip, you must use BL/AP/CP/CSC
- Use of same or higher BIT Firmware is recommended to fully recover device
- Software will automatically use preloader from BL if device is connected in BROM mode


Added Read Dump
- Simple and Easy Tool to make Full Dump
- Backup BOOT1/BOOT2 and USERAREA
- USERAREA dump is completely customizable
- You can choose either FULL or set own Start/Length for USERAREA
- Auto detect if save location has enough free space to save dump


Added Write Dump
- You can write back dump created by Read Dump function
- Just select CFG file and tick parts of dump you want to write
- Writing DUMP from one device to another is not recommended
- Make sure to backup security partitions before writing DUMP from another device


Fixed "Lost in background" issue on Confirmation Dialog at Startup

Improved Format Functions

Improved Write Flash Function

Minor UI Changes




Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)




Note : Some features are device/OS specific and may not work on all devices.




WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.

ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.




Download using Support Access or Mirrors



Official Website:
Ultimate Multi Tool
UMT Pro


Br,
UMT

 

[GsmToto]

USING PL_EXLOIT [INFINIX V3]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM5)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&237d5c64&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 44D7A06A6322393BCB59FA34666EBDD0
SoC ID[0] : 4B6F6258E173216984A2F289FD3BCFCD
SoC ID[1] : EB25C7CFEEF664BE3D527EDB92AC837A
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Loading Extension...Done
Int. RAM : 0x0000000000070000 [448,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : MMC256
CID : D62D004D4D433235365116C3A23F6A71
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000000400000 [4,00 MB]
USERAREA : 0x0000003A40A00000 [233,01 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
And. Ver. : 13
Build Dt. : Sat Sep 16 18:44:22 CST 2023
Display ID : INFINIX-T-64-ARMV82-230916V1361
Ver. Inc. : 230916V2142
Locale : en-US
Patch : 2023-09-05
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 209223133_15893312.lo

 

[Ayub034936]

USING PL_EXLOIT [INFINIX V3]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM5)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&237d5c64&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 44D7A06A6322393BCB59FA34666EBDD0
SoC ID[0] : 4B6F6258E173216984A2F289FD3BCFCD
SoC ID[1] : EB25C7CFEEF664BE3D527EDB92AC837A
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Loading Extension...Done
Int. RAM : 0x0000000000070000 [448,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : MMC256
CID : D62D004D4D433235365116C3A23F6A71
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000000400000 [4,00 MB]
USERAREA : 0x0000003A40A00000 [233,01 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
And. Ver. : 13
Build Dt. : Sat Sep 16 18:44:22 CST 2023
Display ID : INFINIX-T-64-ARMV82-230916V1361
Ver. Inc. : 230916V2142
Locale : en-US
Patch : 2023-09-05
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 209223133_15893312.lo

2024/03

 

[bellalhussain]

UMTv2 / UMT Pro
Innovative and Intelligent


UltimateMTK2 v1.2
The Ultimate MediaTek Tool

Please login to view image

What's New:

Added Vivo Demo Reset (New)
- Tested on Vivo T2x 5G and Y28 5G


Added Vivo Demo Reset (Old)
- For devices not supported by New Method


Added Samsung Unbrick and TAR Flashing
- Simple and Easy way to Unbrick Samsung Devices
- NO NEED OF UNBRICK FIRMWARE ANYMORE
- Supports Completely Formatted Flash Chips
- Creation GPT on the fly if it is Erased
- No need to use Odin to flash after Unbrick if used BL/AP/CP/CSC
- Flashing any Single TAR is supported if GPT is intact
- Incase of fully formatted flash chip, you must use BL/AP/CP/CSC
- Use of same or higher BIT Firmware is recommended to fully recover device
- Software will automatically use preloader from BL if device is connected in BROM mode


Added Read Dump
- Simple and Easy Tool to make Full Dump
- Backup BOOT1/BOOT2 and USERAREA
- USERAREA dump is completely customizable
- You can choose either FULL or set own Start/Length for USERAREA
- Auto detect if save location has enough free space to save dump


Added Write Dump
- You can write back dump created by Read Dump function
- Just select CFG file and tick parts of dump you want to write
- Writing DUMP from one device to another is not recommended
- Make sure to backup security partitions before writing DUMP from another device


Fixed "Lost in background" issue on Confirmation Dialog at Startup

Improved Format Functions

Improved Write Flash Function

Minor UI Changes




Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)




Note : Some features are device/OS specific and may not work on all devices.




WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.

ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.




Download using Support Access or Mirrors



Official Website:
Ultimate Multi Tool
UMT Pro


Br,
UMT

UMTv2 / UMT Pro
Innovative and Intelligent


UltimateMTK2 v1.2
The Ultimate MediaTek Tool

Please login to view image

What's New:

Added Vivo Demo Reset (New)
- Tested on Vivo T2x 5G and Y28 5G


Added Vivo Demo Reset (Old)
- For devices not supported by New Method


Added Samsung Unbrick and TAR Flashing
- Simple and Easy way to Unbrick Samsung Devices
- NO NEED OF UNBRICK FIRMWARE ANYMORE
- Supports Completely Formatted Flash Chips
- Creation GPT on the fly if it is Erased
- No need to use Odin to flash after Unbrick if used BL/AP/CP/CSC
- Flashing any Single TAR is supported if GPT is intact
- Incase of fully formatted flash chip, you must use BL/AP/CP/CSC
- Use of same or higher BIT Firmware is recommended to fully recover device
- Software will automatically use preloader from BL if device is connected in BROM mode


Added Read Dump
- Simple and Easy Tool to make Full Dump
- Backup BOOT1/BOOT2 and USERAREA
- USERAREA dump is completely customizable
- You can choose either FULL or set own Start/Length for USERAREA
- Auto detect if save location has enough free space to save dump


Added Write Dump
- You can write back dump created by Read Dump function
- Just select CFG file and tick parts of dump you want to write
- Writing DUMP from one device to another is not recommended
- Make sure to backup security partitions before writing DUMP from another device


Fixed "Lost in background" issue on Confirmation Dialog at Startup

Improved Format Functions

Improved Write Flash Function

Minor UI Changes




Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)




Note : Some features are device/OS specific and may not work on all devices.




WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.

ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.




Download using Support Access or Mirrors



Official Website:
Ultimate Multi Tool
UMT Pro


Br,
UMT

need to add except userdata options in read dump

for save storage and long time .

please add this next update