UMT UMT Box / PRO Modules Updates Here

[GsmToto]

Operation : Multi Flash
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM4)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1D01400 [SDM662] 00007200
OPK_DATA : 4B60244704D72138F2198FBDE6433FCE1D25A7B0472DD7E5B96DD5BB7233886E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM662]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SDM662, UFS, 128 GB
LU Count : 6 [0x01CB9800] [0x00000800] [0x00000800] [0x00008000] [0x00100000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [86]
Reading Device Information...OK
Device : Xiaomi
Software : Android-Q-build-20221230061129, V13.0.3.0.SJFMIXM [Fri Dec 30 06:18:04 CST 2022]
Android Ver. : 12
Patch Level : 2022-12-01
Processing [rawprogram0.xml]
Writing [vbmeta_system.img] -> [vbmeta_system] ...Done
Writing [persist.img] -> [persist] ...Done
Writing [recovery.img] -> [recovery] ...Done
Writing [super.img ] -> [super]...Done
Writing [userdata.img ] -> [userdata]...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram1.xml]
Writing [xbl_config.elf] -> [xbl_config] ...Done
Writing [xbl.elf] -> [xbl] ...Done
Writing [gpt_main1.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup1.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram2.xml]
Writing [xbl_config.elf] -> [xbl_configbak] ...Done
Writing [xbl.elf] -> [xblbak] ...Done
Writing [gpt_main2.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup2.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram3.xml]
Writing [gpt_main3.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup3.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram4.xml]
Writing [multi_image.mbn] -> [multiimgoem] ...Done
Writing [vbmeta.img] -> [vbmeta] ...Done
Writing [qupv3fw.elf] -> [qupfw] ...Done
Writing [devcfg.mbn] -> [devcfg] ...Done
Writing [storsec.mbn] -> [storsec] ...Done
Writing [hyp.mbn] -> [hyp] ...Done
Writing [hyp.mbn] -> [hypbak] ...Done
Writing [cmnlib.mbn] -> [cmnlib] ...Done
Writing [cmnlib.mbn] -> [cmnlibbak] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64bak] ...Done
Writing [km4.mbn] -> [keymaster] ...Done
Writing [km4.mbn] -> [keymasterbak] ...Done
Writing [BTFM.bin] -> [bluetooth] ...Done
Writing [abl.elf] -> [abl] ...Done
Writing [abl.elf] -> [ablbak] ...Done
Writing [imagefv.elf] -> [imagefv] ...Done
Writing [imagefv.elf] -> [imagefvbak] ...Done
Writing [uefi_sec.mbn] -> [uefisecapp] ...Done
Writing [uefi_sec.mbn] -> [uefisecappbak] ...Done
Writing [featenabler.mbn] -> [featenabler] ...Done
Writing [featenabler.mbn] -> [featenablerbak] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [rpm.mbn] -> [rpmbak] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [tz.mbn] -> [tzbak] ...Done
Writing [logfs_ufs_8mb.bin] -> [logfs] ...Done
Writing [dtbo.img] -> [dtbo] ...Done
Writing [dspso.bin] -> [dsp] ...Done
Writing [boot.img] -> [boot] ...Done
Writing [NON-HLOS.bin] -> [modem] ...Done
Writing [cache.img ] -> [cache]...Done
Writing [gpt_main4.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup4.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram5.xml]
Writing [gpt_main5.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup5.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Set Boottable Storage Drive to 1...Done
Reading Partition Table...OK [86]
Resetting FRP Lock.......Done
Resetting device...Done
Operation Finished.

 

[GsmToto]

Device: Any Samsung
Operation: Reset FRP / RL / EE
Port: COM3 : SAMSUNG Mobile USB Modem #78
Checking for Device... Found [Normal Mode]
Reading Phone Information... OK
Model: SM-G531F
IMEI: 3552xxxxxxxxxxxx
Software: G531FDPJ2/G531FDDU1APJ2/G531FDDU1APJ2DU1APJ2/G531FODD1A
Init Download Mode... OK
Port: COM2 : SAMSUNG Mobile USB Modem
Reading Data from Phone... Done
Chipset: PXA1L88 [HiSpeed]
Resetting FRP Lock Data... Done
Elapsed Time: 00:57
[Ultimate Samsung Flasher v1.5]

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [BROM EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek USB Port (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&237d5c64&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.2.0.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 63275F3F84F893B96357151392FE7C0D
SoC ID[0] : F8D1193703EADB1408D136540FDF471C
SoC ID[1] : 90E38101427D0C92ACB4CA793B5E580E
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_merlin.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 13014E53304A394A3810224C7953DJO [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000070000 [448,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : S0J9J8
CID : 13014E53304A394A3810224C7922B7EF
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000000E8F800000 [58,24 GB]
PRE EOL : NORMAL
Life. Est.A : 70%-80% LIFE TIME USED
Life. Est.B : 20%-30% LIFE TIME USED
Reading Partition Table...OK
Manuf. : Xiaomi
And. Ver. : 10
Build Dt. : Mon May 17 14:19:36 CST 2021
Display ID : AL2522-Merlin-V101-Q-0517
Ver. Inc. : V12.0.8.0.QJOMIXM
Locale : en-GB
Mod. Dev. : merlin_global
Patch : 2021-05-01
Bootloader : UNLOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.3]
Log Saved : 20803466_128744.log

 

[GsmToto]

Device : Xiaomi Redmi 10C (fog)
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1801B00 [SM6225] 00007200
OPK_DATA : 4B60244704D72198FBDE6433FCE 1D25A7B0472DD721E5B96DD5BB7233886E38F
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6225_001]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Init EDL Auth...OK
Detecting Storage Type...OK
Hardware : SM6225, UFS, 64 GB
LU Count : 6 [0x00D5F800] [0x00000800] [0x00000800] [0x00002000] [0x00180000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [94]
Reading Device Information...OK
Software : , V14.0.7.0.TGEMIXM [Mon May 27 11:16:38 UTC 2024]
Android Ver. : 13
Patch Level : 2024-06-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 10.3

 

[GsmToto]

vivo y83 Safe Format+FRP Done

USING PL_EXLOIT [VIVO V1]
Brand/Model : Auto / Auto Detect
Operation : Safe Format+FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM39)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&323149bf&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.2.0.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 2E49E56BA0B3EEC496E1731382E8187D
SoC ID[0] : F5BEE0E94BEFC946562F5D2D5B10B53F
SoC ID[1] : C9F1A1A27B7C721276E4AF3E39E239EE
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Int. RAM : 0x000000000003A000 [232.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : DH6DMB
CID : 150100444836444D4205700B6AA7B493
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
PRE EOL : NORMAL
Life. Est.A : 30%-40% LIFE TIME USED
Life. Est.B : 30%-40% LIFE TIME USED
Reading Partition Table...OK
Brand : vivo
Manuf. : vivo
Model : vivo 1802
Device : PD1803BF_EX
And. Ver. : 8.1.0
Prod. Ver. : PD1803BF_EX_A_1.23.3
Prod. Name : PD1803BF_EX
Build Dt. : Wed Apr 14 16:04:06 CST 2021
Display ID : O11019 release-keys
Ver. Inc. : 1618387454
Locale : en-US
Patch : 2021-03-01
Bootloader : UNLOCKED
Executing Safe Format...Done
If phone stuck on recovery, try [Fix Recovery].
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.3]
Log Saved : 20240715_173242.log

 

[GsmToto]

MOBICEL RX17 FRP RESET DONE WITH UMT SPD
Job: Remove FRP
SELECTED: SC7731E
ACTION: Erase FRP
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM3)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 91B6E8 [5e] 91B6E8
FileSystem: EMMC
Read partition info is supported by loader.
CPU NAME: SC7731E
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\UMT\unisoc_module\spreadtrum_module_backup_fold er\Saved_Logs\_erase_frp_61.txt
Total Time: 00:00:45
Done.

 

[GsmToto]

Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM47 [MediaTek USB Port_V1632 (COM4)]
Device Path: \\?\usb#vid_0e8d&pid_0003#5&2&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed37d5c64}
Chipset: 0x6580, [MT6580] [Unknown]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: False] [DA Auth: False]
MEID: 64E2143403D4BCD1A9B49E04DA572B7E
Preparing device...
-- Success!
Preloader saved as : preloader_lcsh6580_weg_sz_n_240719_151127.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1632 (COM4)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connecting to HighSpeed Port...
Waiting for HighSpeed Port..
Port : MediaTek DA USB VCOM (Android) (COM1)
device path: \\?\usb#vid_0e8d&pid_2001#5&237d5c64&0&3#{a50-6530-11d2-901f-00c04fb951eddcbf1}
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
Brand : TCL
Manufacturer : TCL
Model : 5009A
Prod. Name : 5009A
Device : U5A_PLUS_3G
Build Date : 2019年 02月 20日 星期三 12:57:33 CST
Build Flavor : full_lcsh6580_weg_sz_n-user
Build Desc. : full_lcsh6580_weg_sz_n-user 7.0 NRD90M 1550638690 release-keys
Platform : mt6580
Android Ver. : 7.0
Display ID : NRD90M release-keys
Patch Level : 2019-01-05
Data missing! Could not read extended information!
Userdata is NOT ENCRYPTED
Seeking FRP Data...
Resetting FRP...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 5.1]

 

[GsmToto]

Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM45 [MediaTek USB Port (COM45)]
Device Path: \\?\usb#vid_0e8d&pid_0003#6&323149bf&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765] [Helio P35/G35]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: False] [DA Auth: True]
MEID: C1408CAE80D965EB69A7F5BD8FC4F5D1
Preparing device...
-- Success!
Preloader saved as : preloader_x688b_h659_240721_141727.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM45)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
Build Date : Fri Mar 24 21:19:16 CST 2023
Build Flavor : sys_tssi_64_infinix_q_ota-user
Build Desc. : sys_tssi_64_infinix_q_ota-user 11 RP1A.200720.011 282776 release-keys
Android Ver. : 11
Display ID : INFINIX-R-64-230324V566
Patch Level : 2023-03-05
Userdata is ENCRYPTED
Erasing Userdata...
- Success!
Seeking FRP Data...
Resetting FRP...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 5.1]

 

[GsmToto]

Job: Remove FRP
SELECTED: C53
ACTION: Erase FRP
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM3)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 742A48 [5e] C041218
UID: M2Y860_16_36_22
FileSystem: EMMC
Read partition info is supported by loader.
CPU NAME: T616
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.

 

[GsmToto]

Port : Fastboot Inteface
Baud Rate : Not Applicable
Device : Motorola
Operation : New FRP Reset
Searching for Device in FastBoot Mode... OK
Reading Phone Information...
Model : XT1920DL
Boot Ver. : moto-msm8920-B9.C2
Baseband : M8920_21.11.11.63.03R NORA_TRACFONE_CUST
Software : Blur_Version.28.266.10.nora_retus.retail.en.US
IMEI : 35446995267098423
CPU : MSM8920
RAM : 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
EMMC : 16GB SAMSUNG QE63MB RV=08 PV=03 FV=0000000000000003
Setting Factory Mode... OK
Searching Network Interface... Found
Connecting to device... OK
Model : moto e5 (XT1920DL)
Bootloader : 0xB9C2
Baseband : M8920_21.11.11.63.03R NORA_TRACFONE_CUST
Build : Blur_Version.28.266.10.nora_retus.retail.en.US
Android : 8.1.0
Searching Network Interface... Found
Connecting to device... OK
Model : moto e5 (XT1920DL)
Bootloader : 0xB9C2
Baseband : M8920_21.11.11.63.03R NORA_TRACFONE_CUST
Build : Blur_Version.28.266.10.nora_retus.retail.en.US
Android : 8.1.0
Resetting FRP... OK
Searching for Device in FastBoot Mode... OK
Removing Factory Mode... OK
Operation Finished.
Elapsed Time: 02:18
[Module Ver. 5.9]
Log Saved to Logs\248904_126852.log

 

[GsmToto]

ob: Remove FRP
SELECTED: SM-A032F
ACTION: Erase FRP
Start Detect phone.
Testpoint image link for this model is located in utils tab
Phone must be off(you can service this phone without battery also).
Connect Testpoint while inserting usb cable.
After booting, testpoint can be removed.
Detected: SCI USB2Serial (COM2)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 2408C96 [5e] 9165D2
UID: TFGB18_2_25_22
FileSystem: EMMC
Read partition info is supported by loader.
***************
Manufacturer: samsung
Brand: samsung
Device: a3core
Model: SM-A032F
Build ID: RP1A.201005.001
CPU arhitecture: armeabi-v7a
Build product name: a3core
Build description: a3corexx-user 11 RP1A.201005.001 A032FXXU1AUKE release-keys
Build Id: RP1A.201005.001
Android Release: 11
Android Version: RP1A.201005.001.A032FXXU1ASMUH
Security patch: 2021-11-01
CPU NAME: SC9863A
Removing frp, wait...
Found [persistent] [persistent] Size to download: 1024 KB
[1]FRP: persistent
Done.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\UMT\unisoc_module\spreadtrum_module_backup_fold er\Saved_Logs\samsung_RP1A_201005_001_A032FXXMUHE_erase_frp.txt
Total Time: 00:00:40
Done.

 

[GsmToto]

Job: Remove FRP
SELECTED: SC7731E
ACTION: Erase FRP
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
Keep key untill boot complete.
Detected: SCI USB2Serial (COM2)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 916124 [5e] 916124
FileSystem: EMMC
Read partition info is supported by loader.
***************
Manufacturer: itel
Brand: Itel
Device: W5006X
Model: itel W5006X
Build ID: QP1A.190711.020
CPU arhitecture: armeabi-v7a
Hardware: sc7731e_1h10_v1.1.0
Hardware version: SC7731e_2_IRD_K_V1.1.0
Build product name: W5006X
Build description: W5006X-user 10 QP1A.190711.020 64 release-keys
Product name: F3112RU
Transsion device name: itel A17
Build Id: QP1A.190711.020
Android Release: 10
Android Version: W5006X-F3112RU-10.0-RU-V017-20220722
Security patch: 2022-06-05
This phone have frp partition.
CPU NAME: SC7731E
Removing frp, wait...
[0]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\UMT\unisoc_module\spreadtrum_module_backup_fold er\Saved_Logs\Itel_sc7731e_1h10_v1_1_0_W5006X-F3112RU-10_0-RU-V017-2022068933_erase_frp.txt
Total Time: 00:00:43
Done.

 

[GsmToto]

Job: Remove FRP
SELECTED: SM-A032M
ACTION: Erase FRP
Start Detect phone.
Phone must be off(you can service this phone without battery also).
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM2)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 42C039E [5e] 91D129
UID: TM4Y25_16_7_30
FileSystem: EMMC
Read partition info is supported by loader.
***************
Manufacturer: samsung
Brand: samsung
Device: a3core
Model: SM-A032M
Build ID: RP1A.201005.001
CPU arhitecture: armeabi-v7a
Build product name: a3core
Build description: a3coreub-user 11 RP1A.201005.001 A032MUBS5UK8V8V7L release-keys
Build Id: RP1A.201005.001
Android Release: 11
Android Version: RP1A.201005.001.A032MUBS57FK7J8
Security patch: 2022-11-01
CPU NAME: SC9863A
Removing frp, wait...
Found [persistent] [persistent] Size to download: 1024 KB
[1]FRP: persistent
Done.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\UMT\unisoc_module\spreadtrum_module_backup_fold er\Saved_Logs\samsung_RP1A_201005_001_A032MUBS2AVL 2_erase_frp.txt
Total Time: 00:00:49
Done.

 

[GsmToto]

Job: Remove FRP
SELECTED: Tiger T606
ACTION: Erase FRP
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM3)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 742606 [5e] C4D5295
UID: M2H669_21_37_17
FileSystem: EMMC
Read partition info is supported by loader.
CPU NAME: T606
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\UMT\unisoc_module\spreadtrum_module_backup_fold er\Saved_Logs\_erase_frp_62.txt
Total Time: 00:00:39
Done.

 

[KHAN JAN]

Why not updating UMTv2 - UltimateMTK2 almost all tools have updated but your team is working very slow.
Most of infinix and tecno phones are not removing pattern and FRP on your tools,

Hear logs

USING PL_EXLOIT [INFINIX V1]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM29)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&2f0b5c80&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : B4999CAFB79D6EA11F45A50EE7C633C9
SoC ID[0] : 56B0F5294BDC9B12214F6A8FC35AE3B1
SoC ID[1] : 0DC03215CE96A46A569634800D733830
Sending 1st DA..Failed!
Try to select another Download Agent.
Operation Finished.
[UltimateMTK2 v1.4]
======================================

USING PL_EXLOIT [INFINIX V2]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM29)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&2f0b5c80&0&3#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : B4999CAFB79D6EA11F45A50EE7C633C9
SoC ID[0] : 56B0F5294BDC9B12214F6A8FC35AE3B1
SoC ID[1] : 0DC03215CE96A46A569634800D733830
Sending 1st DA..OK
Jump DA Address...OK
Syncing...Failed!
Operation Finished.
[UltimateMTK2 v1.4]
================================================

USING PL_EXLOIT [INFINIX V3]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM29)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&2f0b5c80&0&3#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : B4999CAFB79D6EA11F45A50EE7C633C9
SoC ID[0] : 56B0F5294BDC9B12214F6A8FC35AE3B1
SoC ID[1] : 0DC03215CE96A46A569634800D733830
Sending 1st DA..OK
Jump DA Address...OK
Syncing...Failed!
Operation Finished.
[UltimateMTK2 v1.4]