samsung Tool Pro 45.14. Small fix and improvements.

[GsmToto]

Checking Login and Password... OK
Balance: 13 crd.
You have 13 credit(s) left. This operation takes 1 credits. Continue? Yes
Searching Samsung modem... detected COM8
Reading phone info...
Model: SM-A042M
AP version: A042MUBS6CWL5
CSC version: A042MOWA6CWL5
CP version: A042MUBS6CWL3
OS version: 13
Product code: CDR
Phone SN: R8YTB130GXD
IMEI: 351XXXXXXXXXXXX
Unique number: H154450302B8D1D38011
Checking avaiable method... OK
Reading carrier id... [CDR] ... OK
Checking phone... OK
Preparing data... error (2, NG_00000013)
Could not read data. Please try again.

Done with Samsung Tool PRO v.45.14 [SM-A042M,Direct Unlock]

 

[GsmToto]

Checking Login and Password... OK
Balance: 35 crd.
You have 35 credit(s) left. This operation takes 5 credits. Continue? Yes
Waiting for device to become ready... OK
Reading phone info... OK
Reading IMEI... OK
Model: SM-G975U
Android version: 12
PDA version: G975USQU8ISX2
CSC version: G975UOYN8ISX2
Phone version: G975USQU8ISX2
Product code: SM2G975UXXXXX
CSC country code: USA
CSC sales code: ATT
Carrier ID: ATT
Phone SN: R38MXXXXXXX
IMEI: 352XXXXXXXXXXXXXX
HW version: REV1.0
RF cal date: 2019.07.17
Chip name: SM8150
Modem board: SM8150
Security patch: 2023-02-01
Boot Warranty bit: 0
SIM State: ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... error (1)

Done with Samsung Tool PRO v.45.14 [SM-G975U,Read Codes via Server]

 

[GsmToto]

Checking Login and Password... OK
Balance: 30 crd.
You have 30 credit(s) left. This operation takes 5 credits. Attention! In case if phone asking MCK(Freeze, PUK) code, using this method will consume credits twice - first for MCK(Freeze, PUK) code and then for NCK(Network, PIN). Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-J530F
Android version: 9
PDA version: J530FXXS8YHB3
CSC version: J530FXEU8YHB3
Phone version: J530FXXS8BHN4
Product code: SM2J530FZKAXEU
CSC country code: UK & IRE
CSC sales code: XEU
Phone SN: RF8K337NHYJ
IMEI: 3540530XXXXXXXXXX
HW version: MP 0.500
RF cal date: 20180325
Chip name: EXYNOS7870
Modem board: SHANNON754
Security patch: 2021-01-01
Boot Warranty bit: 0
SIM State: ABSENT
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading lock state... OK
Your phone is requesting a MCK(Freeze, PUK) code. What code do you want to calculate? MCK(Freeze, PUK)
Executing... OK

Done with Samsung Tool PRO v.45.14 [SM-J530F,Read Codes via Server [UPLOAD 2021]]

 

[GsmToto]

Operation: Unlock
Selected model: SM-N975F
Software version: 45.14

Checking Login and Password... OK
Balance: 10 crd.
You have 10 credit(s) left. This operation takes 5 credits. Continue? Yes
Waiting ADB device... OK
Reading phone info... OK
Reading IMEI... OK
Model: SM-N975F
Android version: 12
PDA version: N975FXXS9HWK3
CSC version: N975FOXM9HWK3
Phone version: N975FXXS9HWK3
Product code: SM-N975FZSLAUM
CSC country code: Switzerland
CSC sales code: AUT
Carrier ID: PGU
Phone SN: RF8MB16QBFM
IMEI: 35357976543243
HW version: REV0.6
RF cal date: 20191112
Chip name: EXYNOS9825
Modem board: SHANNON5000
Security patch: 2023-08-01
Boot Warranty bit: 1
SIM State: ABSENT OK
Reading IMEI... OK
Checking Super user right... true
Root version: 26.3:MAGISKSU
Checking data... OK
Searching server... OK
Checking server answer... OK
Data preparation... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing 1st step... error (6 2.7.9)
Rebooting phone... OK

Done with Samsung Tool PRO v.45.14 [SM-N975F,Unlock]

 

[GsmToto]

Checking Login and Password... OK
Balance: 50 crd.
You have 50 credit(s) left. This operation takes 5 credits. Attention! In case if phone asking MCK(Freeze, PUK) code, using this method will consume credits twice - first for MCK(Freeze, PUK) code and then for NCK(Network, PIN). Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-J530F
Android version: 9
PDA version: J530FXXS8CUK3
CSC version: J530FXEU8CUK3
Phone version: J530FXXS8CTK3
Product code: SM2J530FZKAIUG
CSC country code: UK & IRE
CSC sales code: XEU
Phone SN: RF8K337GKBN
IMEI: 354053096844080
HW version: MP 0.500
RF cal date: 20180325
Chip name: EXYNOS7870
Modem board: SHANNOJ332
Security patch: 2021-01-01
Boot Warranty bit: 0
SIM State: ABSENT
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading lock state... OK
Your phone is requesting a MCK(Freeze, PUK) code. What code do you want to calculate? MCK(Freeze, PUK)
Executing... OK

Done with Samsung Tool PRO v.45.14 [SM-J530F,Read Codes via Server [UPLOAD 2021]]

 

[GsmToto]

Waiting ADB device... OK
Reading phone info...
Model: SM-P585Y
Android version: 7.0
PDA version: P585YDXU2BRK3
CSC version:
Phone version: P585YDXU2BRM7
Product code:
CSC country code:
CSC sales code:
Phone SN: 00000000000
IMEI: 35182688342156
HW version:
RF cal date:
Chip name: EXYNOS78278
Modem board: SHANNON333
Security patch: 2018-02-01
Boot Warranty bit: 1
SIM State: READY
Checking Super user right... true
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Searching server... OK
Waiting for server answer... OK
Patching... OK
Rebooting phone... OK

Done with Samsung Tool PRO v.45.14 [SM-P585Y,Patch CERT Nov 2019]

 

[GsmToto]

Operation: Unlock
Selected model: SM-N981U
Software version: 45.14

Checking Login and Password... OK
Balance: 60 crd.
You have 60 credit(s) left. This operation takes 5 credits. Continue? Yes
Waiting ADB device... OK
Reading phone info... OK
Reading IMEI... OK
Model: SM-N981U
Android version: 13
PDA version: N981USQS6HGM7
CSC version: N981UOYN6HGM7
Phone version: N981USQS6HGM7
Product code: SM-N981UZGAHYI
CSC country code: USA
CSC sales code: USC
Carrier ID: SPR
Phone SN: RFCN80DPDVI
IMEI: 35068578942114
HW version: REV1.0
RF cal date: 2021.05.24
Chip name: SM8250
Modem board: SDX55M
Security patch: 2024-04-01
Boot Warranty bit: 0
SIM State: ABSENT,NOT_READY
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Reading IMEI... OK
Initialization zTool... OK
Running zTool, please wait... OK
Initialization... error (0.12)

Done with Samsung Tool PRO v.45.14 [SM-N981U,Unlock]

 

[GsmToto]

UNLOCK INSTRUCTIONS:
Unlocking using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server [OLD]
Selected model: SM-J260M
Software version: 45.14

Checking Login and Password... OK
Balance: 15 crd.
You have 15 credit(s) left. This operation takes 5 credits. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-J260M
Android version: 8.1.0
PDA version: J260MUBU4ASF3
CSC version: J260MOWM4ASF3
Phone version: J260MUBS4ASE3
Product code: SM-J260MZKBBVM
CSC country code: Bolivia
CSC sales code: BVT
Phone SN: R58XXXXXXXX
IMEI: 351XXXXXXXXXXXX
HW version: MP 0.500
RF cal date: 20191107
Chip name: EXYNOS7570
Modem board: SHANNON334
Security patch: 2019-06-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code(MCK, PUK): 00000000
NET lock: 00000000
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.45.14 [SM-J260M,Read Codes via Server [OLD]]

 

[GsmToto]

REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.

Operation: Patch CERT Jul 2021
Selected model: SM-M105G
Software version: 45.14

Waiting ADB device... OK
Reading phone info...
Model: SM-M105G
Android version: 10
PDA version: M105GPUSACVH3
CSC version: M105GSERACVH3
Phone version: M105GXXSACVH3
Product code: SM-M105GDAGSER
CSC country code: Russia
CSC sales code: SER
Carrier ID: KSA
Phone SN: R28M330KANC
IMEI: 355037896434666
HW version: REV0.3
RF cal date: 20190323
Chip name: EXYNOS7833
Modem board: SHANNON315
Security patch: 2022-10-01
SIM State: LOADED,LOADED
Checking Super user right... true
Root version: 27.0:MAGISKSU
Checking data... OK
Searching server... OK
Checking server answer... OK
Data preparation... OK
Searching server... OK
Waiting for server answer... OK
Patching... OK
Rebooting phone... OK

Done with Samsung Tool PRO v.45.14 [SM-M105G,Patch CERT Jul 2021]

 

[GsmToto]

Operation: Read Codes via Server
Selected model: SM-A715F
Software version: 45.14

Checking Login and Password... OK
Balance: 30 crd.
You have 30 credit(s) left. This operation takes 5 credits. Continue? Yes
Waiting for device to become ready... OK
Reading phone info...
Model: SM-A715F
Android version: 11
PDA version: A715FXXU8BVB4
CSC version: A715FOWA8BVB4
Phone version: A715FXXU8BVB4
Product code: SM-A715FZBLPCT
CSC country code: Puerto Rico
CSC sales code: PCT
Carrier ID: PCT
Phone SN: R58N30J2X3B
IMEI: 352630144567632
HW version: MP 0.300
RF cal date: 2020.03.04
Chip name: SM7150
Modem board: SM7150
Security patch: 2022-02-01
Boot Warranty bit: 0
SIM State: ABSENT
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM2
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM2 detected
Reading data from phone... OK
Searching data... [ no ] [ no ] [ no ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM2
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM2 detected
Reading data from phone... OK
Searching data... [ no ] [ no ] [ no ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM2
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM2 detected
Reading data from phone... OK
Searching data... [ no ] [ no ] [ no ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM2
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM2 detected
Reading data from phone... OK
Searching data... [ no ] [ no ] [ no ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... error (1 )

Done with Samsung Tool PRO v.45.14 [SM-A715F,Read Codes via Server]

 

[GsmToto]

Operation: Read Codes via Server [UPLOAD 2021]
Selected model: SM-G950F
Software version: 45.14

Checking Login and Password... OK
Balance: 7 crd.
You have 7 credit(s) left. This operation takes 5 credits. Attention! In case if phone asking MCK(Freeze, PUK) code, using this method will consume credits twice - first for MCK(Freeze, PUK) code and then for NCK(Network, PIN). Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G950F
Android version: 9
PDA version: G950FFXAT46J7
CSC version:
Phone version: G950FXAT46J7
Product code: SM-G950FZSA
CSC country code:
CSC sales code:
Carrier ID: HTS
Phone SN: RF8J80CR5G7W
IMEI: 35903XXXXXXXXX
HW version: MP 0.700
RF cal date: 20173466
Chip name: EXYNOS83245
Modem board: SHAXNON753
Security patch: 2020-09-01
Boot Warranty bit: 0
SIM State: ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading lock state... OK
Searching Samsung modem... detected COM24
Your phone is requesting a MCK(Freeze, PUK) code. What code do you want to calculate? MCK(Freeze, PUK)
Executing... OK
Searching Ramdump interface... COM4 detected
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Reading ramdump data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code (MCK, PUK): 04793144

 

[GsmToto]

Operation: Repair [ROOT]
Selected model: SM-A315G
Software version: 45.14

Waiting ADB device... OK
Reading phone info... OK
Reading IMEI... error(1)
Model: SM-A315G
Android version: 12
PDA version: A315GDXS5DXS4
CSC version: A315GOLE5DXS4
Phone version: A315GDXS5DXS4
Product code: SM-A315GDXUSER
CSC country code: INDONESIA
CSC sales code: XID
Phone SN: RR8N500PT0A
IMEI:
HW version:
RF cal date:
Chip name: MT6768
Modem board: MT6768
Security patch: 2024-02-01
Boot Warranty bit: 1
SIM State: ABSENT,ABSENT OK
Reading IMEI... error(1)
Checking Super user right... true
Root version: 1.5:MAGISKSU(TRTOOLSPRO)
Saving security data... [sec0] ... [sec1] ... [sec2] ... [sec3] ... OK
Backup saved to C:\Program Files (x86)\Z3X\Samsung\SamsungToolPRO\backup\NV\SM-A315G_RR8N500PT0A__2024-07-01_11-32-44.bkp
Searching server... OK
Waiting for server answer... OK
Checking data... OK
Reading 'boot' image... OK
Loading data from 'boot'... OK
Reading 'modem' image... OK
Loading data from 'modem'... OK
Preparation of data... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Reparing... OK
Rebooting phone... OK

Operation: Patch Certificate
Selected model: SM-A315G
Software version: 45.14

Waiting ADB device... OK
Reading phone info... OK
Reading IMEI... error(0)
Model: SM-A315G
Android version: 12
PDA version: A315GDXS5DXS4
CSC version: A315GOLE5DXS4
Phone version: A315GDXS5DXS4
Product code: SM-A315GDXUSER
CSC country code: INDONESIA
CSC sales code: XID
Phone SN: RR8N5064HGTL
IMEI:
HW version:
RF cal date:
Chip name: MT6768
Modem board: MT6768
Security patch: 2024-02-01
Boot Warranty bit: 1
SIM State: ABSENT,ABSENT
New firmware is not supported.

Operation: Patch Certificate [ROOT]
Selected model: SM-A315G
Software version: 45.14

Waiting ADB device... OK
Reading phone info... OK
Reading IMEI... OK
Model: SM-A315G
Android version: 12
PDA version: A315GDXS5DXS4
CSC version: A315GOLE5DXS4
Phone version: A315GDXS5DXS4
Product code: SM-A315GDXUSER
CSC country code: INDONESIA
CSC sales code: XID
Phone SN: RR8N500PT0A
IMEI: 353XXXXXXXXXXXXXX
HW version:
RF cal date:
Chip name: MT6768
Modem board: MT6768
Security patch: 2024-02-01
Boot Warranty bit: 1
SIM State: ABSENT,ABSENT OK
Reading IMEI... OK
Checking Super user right... true
Root version: 1.5:MAGISKSU(TRTOOLSPRO)
Searching server... OK
Waiting for server answer... OK
Checking data... OK
Reading 'boot' image... OK
Loading data from 'boot'... OK
Reading 'modem' image... OK
Loading data from 'modem'... OK
Preparation of data... OK
Patching... OK
Rebooting phone... OK

 

[GsmToto]

Checking Login and Password... OK
Balance: 33 crd.
You have 8 credit(s) left. This operation takes 8 credits. Continue? Yes
Waiting ADB device... OK
Reading phone info... OK
Reading IMEI... XXXXXXXXXXXXXXX
Model: SM-G970F
Android version: 12
PDA version: G970FXXUFHVG5
CSC version: G970FOWCFHVG5
Phone version: G970FXXUFHVG5
Product code: SM-G970XZWAIUS
CSC country code: Mexico
CSC sales code: IUS
Carrier ID: PHE
Phone SN: RF8KC233RXB
IMEI:
HW version: MP 0.700
RF cal date: 20181221
Chip name: EXYNOS9820
Modem board: SHANNON5000
Security patch: 2022-07-01
Boot Warranty bit: 1
SIM State: REGIONAL_LOCKED
Checking SIM status... OK
Initialization zTool... OK
Running zTool, please wait... OK
Initialization... OK
Reading lock state... [0] ... OK
Searching server... OK
Waiting for server answer... OK
Unlocking... OK
Checking unlock status... OK Unlock done!

Done with Samsung Tool PRO v.45.14 [SM-G970F,Unlock Regional Lock]

 

[GsmToto]

Operation: Read Codes via Server
Selected model: SM-J330FN
Software version: 41.11

Checking Login and Password... OK
Ballance: 30 crd.
You have 68 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-J330FN
Android version: 9
PDA version: J330FNXXU4CTH6
CSC version: J330FNVFG4CTH6
Phone version: J330FNXXU4CTH6
Product code: SM2J330FZKNCNX
CSC country code: Romania
CSC sales code: CNX
Phone SN: R58K54LWHMIHCDH
IMEI: 35895680334672
HW version: MP 0.500
RF cal date: 20180525
Chip name: EXYNOS7469
Modem board: SHANNON768
Security patch: 2020-09-01
Boot Warranty bit: 0
SIM State: ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Ramdump interface... COM3 detected
Reading data from phone... error (1)
Done with Samsung Tool PRO v.45.14

 

[aliipi]

Samsung Tool Pro 45.14. Small fix and improvements.

Improved Read Codes for:

- A245F, A245M, A245N
- A3460, A346B, A346E, A346M, A346N
- M536B, M536S

Fixed: patch CERT SM-A137F



Dont forget post BUG reports in correct thread.

Check supported phones: CHECK MY PHONE


IMPORTANT:
DONT POST ANY LOGS OF JOB IN THIS THREAD about done jobe. DONE REPORT post only in thread
JOBE NOT DONE REPORT - open own thread , post there all details and wait answer from supporters/developers.
DONT ASK WHEN WILL BE SUPPORTED, ANSWER ASAP - AS SOON AS POSSIBLE
Violation this rules messages will be deleted

stuck here Executing 1st step...

REPAIR INSTRUCTIONS:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reboot to...' button and select mode to reboot (download or recovery).

Operation: Repair
Selected model: SM-A515F
Software version: 45.14

Waiting ADB device... OK
Reading phone info... OK
Reading IMEI... OK
Model: SM-A515F
Android version: 12
PDA version: A515FXXS5FVI1
CSC version: A515FOJM5FVG4
Phone version: A515FXXU5FVG3
Product code: SM-A515FZWWXSG
CSC country code: UAE
CSC sales code: XSG
Carrier ID: XSG
Phone SN: RZ8N31G2KEY
IMEI: 355041112453084
HW version: MP 0.3D
RF cal date: 20200318
Chip name: UNIVERSAL9611
Modem board: SHANNON337
Security patch: 2022-09-01
Boot Warranty bit: 1
SIM State: ABSENT,ABSENT OK
Reading IMEI... OK
Checking Super user right... true
Root version: 24.3:MAGISKSU
Checking data... OK
Searching server... OK
Checking server answer... OK
Data preparation... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing 1st step...

 

[000nothing111]

Operation: Read Codes via Server
Selected model: SM-J330FN
Software version: 41.11

Checking Login and Password... OK
Ballance: 30 crd.
You have 68 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-J330FN
Android version: 9
PDA version: J330FNXXU4CTH6
CSC version: J330FNVFG4CTH6
Phone version: J330FNXXU4CTH6
Product code: SM2J330FZKNCNX
CSC country code: Romania
CSC sales code: CNX
Phone SN: R58K54LWHMIHCDH
IMEI: 35895680334672
HW version: MP 0.500
RF cal date: 20180525
Chip name: EXYNOS7469
Modem board: SHANNON768
Security patch: 2020-09-01
Boot Warranty bit: 0
SIM State: ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Ramdump interface... COM3 detected
Reading data from phone... error (1)
Done with Samsung Tool PRO v.45.14

Can you tell me,why Samsung tool pro stop working onn new updates?

 

[GsmToto]

Waiting ADB device... OK
Reading phone info...
Model: SM-A307FN
Android version: 11
PDA version: A307FNXXU4CWH8
CSC version: A307FNODM4CWH8
Phone version: A307FNXXS4CWH8
Product code: SM-A307FZGVINS
CSC country code: India
CSC sales code: INS
Phone SN:
IMEI: 358553603201008
HW version: MP 0.1B0
RF cal date: 20191002
Chip name:
Modem board: SHANNON327
Security patch: 2023-08-01

 

[GsmToto]

UNLOCK INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options' for Android 4.0 - 4.1.2 or
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options' in Android 4.2+.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button for direct unlock.

Operation: Read Codes
Selected model: SGH-T399
Software version: 45.14

Checking hash file... OK
Waiting ADB device... OK
Reading phone info...
Model: SGH-T399
Android version: 4.2.2
PDA version: T399UVUAQE1
CSC version: T399TMBAQE1
Phone version: T399UVUAQE1
Product code: SGH2T399DNATMB
CSC country code: USA
CSC sales code: TMB
Phone SN: RV8XXXXXXXX
IMEI: 358XXXXXXXXXXXX
HW version: REV1.0
RF cal date: 20140223
Chip name: EXYNOS3470
Modem board: SS222
SIM State: NETWORK_LOCKED
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Please wait, calculating codes...
Freeze code(MCK, PUK): 72869402
NET lock: 68602809
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.45.14 [SGH-T399,Read Codes]

 

[SALMAN203]

samsung g973f unlock done

Checking Login and Password... OK
Balance: 12 crd.
You have 12 credit(s) left. This operation takes 8 credits. Attention! In case if phone asking MCK(Freeze, PUK) code, using this method will consume credits twice - first for MCK(Freeze, PUK) code and then for NCK(Network, PIN). Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G973F
Android version: 11
PDA version: G973FXXSCFUH5
CSC version: G973FOVFCFUH3
Phone version: G973FXXUCFUH3
Product code: SM-G973FZKDVOD
CSC country code: UK
CSC sales code: VOD
Carrier ID: VOD
Phone SN: RF8M31F2EJF
IMEI: 3561271**********
HW version: MP 0.700
RF cal date: 20190312
Chip name: EXYNOS9820
Modem board: SHANNON5000
Security patch: 2021-09-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Checking SIM status... OK
Initialization zTool... OK
Running zTool, please wait... OK
Initialization... OK
Reading lock state... OK
Executing... OK
Searching Ramdump interface... COM7 detected
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Reading ramdump data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Network code (NCK, PIN, REGIONAL): 15075958

Operation: Read Codes via Server
Selected model: SM-G973F
Software version: 45.14

Checking Login and Password... OK
Balance: 4 crd.
Not enough credits my 8 logs back

z3x ki new update ab kab ayegi itna time hogya

 

[GsmToto]

Operation: Read Codes via Server
Selected model: SM-G991B
Software version: 45.14

Checking Login and Password... OK
Balance: 80 crd.
You have 80 credit(s) left. This operation takes 8 credits. Attention! In case if phone asking MCK(Freeze, PUK) code, using this method will consume credits twice - first for MCK(Freeze, PUK) code and then for NCK(Network, PIN). Continue? Yes
Waiting ADB device... OK
Reading phone info... OK
Reading IMEI... OK
Model: SM-G991B
Android version: 14
PDA version: G991BXXUCGFT8
CSC version: G991BOWOCGKU7
Phone version: G991BXXUCGXVG
Product code: SM-G991BZAMTHM
CSC country code: Paraguay
CSC sales code: TGP
Carrier ID: TGP
Phone SN: R5CR31TL04V
IMEI: 3589864216887432
HW version: REV0.5
RF cal date: 20210326
Chip name: EXYNOS2100
Modem board: SHANNON5126HD5
Security patch: 2024-08-01
Boot Warranty bit: 0
SIM State: ABSENT,NOT_READY
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Checking SIM status... OK
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... error (1)
Disable screenlock(PIN, password, fingerprint and etc...).
Disable SIM PIN/PUK code.

Done with Samsung Tool PRO v.45.14 [SM-G991B,Read Codes via Server]