samsung Tool Pro 45.14. Small fix and improvements.

[GsmToto]

UNLOCK INSTRUCTIONS:
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and select 'DM/DUN over HSIC'.
Or use 'Activate Diag' function from 'Repair' tab.
4. Connect the phone to PC with USB cable, install drivers if needed.
5. Select diagnostic port in port settings.
6. Press 'Unlock' button for direct unlock.

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' and follow the instructions in program.
5. When process done, press 'Back' on phone and perform factory reset from phone settings.

To reset Google account activation or Samsung reactivation lock:
1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
4. After phone reboot, go to settings and perform factory reset.

Operation: Reset FRP/React/EE
Selected model: SM-J500M
Software version: 45.14

Searching Samsung USB Flash interface... COM22 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP lock... OK
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.45.14 [SM-J500M,Reset FRP/React/EE]

 

[GsmToto]

Operation: Repair Jul 2021
Selected model: SM-M105G
Software version: 45.14

Waiting ADB device... OK
Reading phone info...
Model: SM-M105G
Android version: 10
PDA version: M105GDXS9CVF1
CSC version: M105GOLM9CVF1
Phone version: M105GDXS9CVF1
Product code: SM-M105GDAGXEV
CSC country code: VIETNAM
CSC sales code: XEV
Carrier ID: XME
Phone SN: R28M32xxxxxxxxxxx
IMEI: 35xxxxxxxxxxxxxxxxxxxx
HW version: REV0.3
RF cal date: 20190322
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2022-06-01
SIM State: ABSENT,LOADED
Checking Super user right... true
Root version: 24.3:MAGISKSU
Checking data... OK
Searching server... OK
Checking server answer... OK
Data preparation... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing 1st step... OK
Executing 2nd step... OK
Searching server... OK
Waiting for server answer... OK
Reparing... OK
Rebooting phone... OK

Operation: Patch CERT Jul 2021
Selected model: SM-M105G
Software version: 45.14

Waiting ADB device... OK
Reading phone info...
Model: SM-M105G
Android version: 10
PDA version: M105GDXS9CVF1
CSC version: M105GOLM9CVF1
Phone version: M105GDXS9CVF1
Product code: SM-M105GDAGXEV
CSC country code: VIETNAM
CSC sales code: XEV
Carrier ID: XME
Phone SN: R28M3xxxxxxxxx
IMEI: 35xxxxxxxxxxxxxxxxxx
HW version: REV0.3
RF cal date: 20190322
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2022-06-01
SIM State: ABSENT,LOADED
Checking Super user right... true
Root version: 24.3:MAGISKSU
Checking data... OK
Searching server... OK
Checking server answer... OK
Data preparation... OK
Searching server... OK
Waiting for server answer... OK
Patching... OK
Rebooting phone... OK

 

[GsmToto]

Using port SAMSUNG Mobile USB Modem #11 (COM7)
Reading info mode MTP ... OK
Model : SM-A047M
CSC : PET
AP version : A047MUBS5CWK1
BL version : A047MUBS5CWK1
CP version : A047MUBS5CWK1
CSC version : A047MOWO5CWK1
IMEI : 35xxXXXXXXXXXXX
SN : RxxWXXXXXXXX
Lock status : NONE
Phone number : null
Country : PE
USB mode : AT,MTP
Unique number : CDP001F0AD3173A
Android version : 13
FRP status : UNLOCK
Security Pach : 2023-12-01

 

[GsmToto]

Operation: Reset FRP
Selected model: SM-A127F
Software version: 44.17

Searching Samsung modem... detected COM7
Reading phone info...
Model: SM-A127F
AP version: A127FXXU5AVC4
CSC version: A127FOJM5AVC4
CP version: A127FXXU5AVC3
OS version: 11
Product code: AFR
Phone SN: RZ8RB
IMEI: 352xxxxxxxxxxxxxxxx
IMEI2: 35xxxxxxxxxxxxxxxx
Unique number: CDV00C818DC9488
Checking avaiable method... OK
Go to 'Emergency call' and dial *#0*# If the code does not work, then reflash the phone OK
Executing 1st step... OK
Waiting ADB device... OK
Executing 2nd step... OK
Rebooting phone... OK
For complete reset FRP, goto 'Settings - General management - Reset' and make 'Factory data reset'
Done with Samsung Tool PRO v.44.17 [SM-A127F,Reset FRP]

 

[GsmToto]

Operation: Reset FRP
Selected model: SM-A047F
Software version: 45.14

Searching Samsung modem... detected COM7
Reading phone info...
Model: SM-A047F
AP version: A047FXXU4CWEW
CSC version: A047FOJM4CWEW
CP version: A047FXXU4CWEW
OS version: 13
Product code: PKD
Phone SN: R58W81F69AS
IMEI: 35*****************
IMEI2: 35****************
Unique number: CDV005E406A716Q
Checking avaiable method... OK
Go to 'Emergency call' and dial *#0*# If the code does not work, then reflash the phone OK
Executing 1st step... OK
Waiting ADB device... OK
Executing 2nd step... OK
Rebooting phone... OK
For complete reset FRP, goto 'Settings - General management - Reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.45.14 [SM-A047F,Reset FRP]

 

[GsmToto]

EPAIR INSTRUCTIONS:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reboot to...' button and select mode to reboot (download or recovery).

Operation: Patch Certificate
Selected model: SM-G532M
Software version: 45.14

Waiting ADB device... OK
Reading phone info...
Model: SM-G532M
Android version: 6.0.1
PDA version: G532MUMU1AQA3
CSC version: G532MUUB1AQA1
Phone version: G532MUBU1APL6
Product code: SM-G532MZKATPA
CSC country code: PANAMA
CSC sales code: TPA
Phone SN: RV8Kxxxxxxxxxxx
IMEI: 354xxxxxxxxxxxx
HW version: MP 0.300
RF cal date: 20180502
Chip name: MT6737T
Modem board: MT6737T
Security patch: 2017-01-01
Boot Warranty bit: 1
SIM State: ABSENT
Checking Super user right... true
Searching server... OK
Checking server answer... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Preparation of data... OK
Writing data to phone... OK
Rebooting phone... OK

Done with Samsung Tool PRO v.45.14 [SM-G532M,Patch Certificate]

 

[GsmToto]

Selected model: E2530
Selected com port: COM2
Selected speed port: 921600
Phone must be OFF
Press * and connect phone by USB cable
Connecting to Device... OK
Sending preloader ... OK
Sending loader ... OK
Erasing ... OK
Writing ... OK
Repair OTP - ok
Elapsed time: 16 second, sw ver: 3.5.0040
-------------------------------------------------------------------------------
Selected model: E2530
Selected com port: COM7
Selected speed port: 921600
Phone must be OFF
Press * and connect phone by USB cable
Connecting to Device... OK
Sending preloader ... OK
Sending loader ... OK
Damping ... OK
Erasing ... OK
Writing ... OK
After power on phone - connect to UART cable
Phone SN: RP3B800767
Deactivate MSL - OK
Calculated code please wait...
Decrypted time: 55 sec
This is zone 0
[PCK]:Enter this without sim #0141*00000000# this is sim lock
[NCK]:Enter this without sim #0111*90123460# this is net lock
[SCK]:Enter this without sim #0121*00000000# this is CP lock
[SPCK]:Enter this without sim #0133*00000000# this is SP lock
[MCK]:Enter this without sim #0199*94675172# this is Master(freeze) code

Read info - ok
Elapsed time: 143 second, sw ver: 3.5.0040

 

[GsmToto]

peration: Unlock
Selected model: SM-T517P
Software version: 45.14

Checking Login and Password... OK
Balance: 25 crd.
You have 25 credit(s) left. This operation takes 5 credits. Continue? No
Operation: Unlock
Selected model: SM-T517P
Software version: 45.14

Checking Login and Password... OK
Balance: 25 crd.
You have 25 credit(s) left. This operation takes 5 credits. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-T517P
Android version: 9
PDA version: T517PVPU1ASG7
CSC version: T517PSPT1ASG7
Phone version: T517PVPU1ASG7
Product code: SM-T517PZSESPR
CSC country code: USA
CSC sales code: SPR
Carrier ID: SPR
Phone SN: R52M910BV3Z
IMEI: 357382100290650
HW version: T517P.02
RF cal date: 20190926
Chip name: EXYNOS7904
Modem board: SHANNON327
Security patch: 2019-07-01
Boot Warranty bit: 0
SIM State: LOADED
Waiting for device to become ready... OK
Reading IMEI... OK
Initialization zTool... OK
Running zTool, please wait... OK
Checking network lock status... LOCKED
Reading data from phone... OK
Searching server... OK
Waiting for server answer... OK
Writing data to phone... OK
Checking network lock status... UNLOCKED
Debranding phone to XAA... OK
Rebooting phone... OK

 

[GsmToto]

Checking Login and Password... OK
Balance: 20 crd.
You have 20 credit(s) left. This operation takes 5 credits. Continue? Yes
Waiting for device to become ready... OK
Reading phone info...
Model: SM-T387AA
Android version: 8.1.0
PDA version: T387AAUCU1ARI2
CSC version: T387AAATT1ARI2
Phone version: T387AAUCU1ARI2
Product code: SM2T387AZKAATT
CSC country code: USA
CSC sales code: ATT
Carrier ID: ATT
Phone SN: R52KA14LX5D
IMEI: 359066090310341
HW version: REV0.4
RF cal date: 2018.10.17
Chip name: MSM8917
Modem board: MSM8917
Security patch: 2018-09-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Waiting for server answer... OK
Calculating... OK
Freeze code(MCK, PUK): 9xxx
NET lock: 82xxxx
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#
Rebooting phone... OK

Done with Samsung Tool PRO v.45.14 [SM-T387AA,Read Codes via Server]

 

[GsmToto]

Operation: Unlock
Selected model: SM-T377P
Software version: 45.14

Waiting ADB device... OK
Reading phone info...
Model: SM-T377P
Android version: 5.1.1
PDA version: FA51_T377PVPU3AQI1
CSC version:
Phone version: T377PVPU3CQI4
Product code: Not Active
CSC country code:
CSC sales code:
Phone SN: 00000000000
IMEI: 355002xxxxxxxxxxxx
HW version: T377P.02
RF cal date: 2017.07.25
Chip name: MSM8916
Modem board: MSM8916
Boot Warranty bit: 1
Writing AT RIL... OK
Initialization AT RIL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.45.14 [SM-T377P,Unlock]

 

[GsmToto]

peration: Info
Selected model: SM-A326U
Software version: 45.14

Searching Samsung modem... detected COM3
Reading phone info...
Model: SM-A326U
AP version: A326USQSCDWL3
CSC version: A326UOYNCDWL3
CP version: A326USQSCDWL3
OS version: 13
Product code: DSH
Phone SN: RFCR715H0XH
IMEI: 350091125040191
Unique number: CE05215564CA69781C7Z
Reading IMEI... OK
IMEI: 350096832267921 (SIGN: UNKNOWN)

Done with Samsung Tool PRO v.45.14 [SM-A326U,Info]

 

[GsmToto]

Manufacturer: SAMSUNG
- Model: SM-G998U
- IMEI: 356XXXXXXXXXX
- Security Patch: [2024-02-01]
- Serial Number: R5CNXXXXXXXX
- Android Version: 14
- BL: G998UXXXXXXXXI
- CP: G998USQXXXXXXXXXXx
- Board: SM8350
- Hardware: qcom
- Knox: 0
- SELinux: Enforcing
- KG State: Checking
- SIM: ,
- SIM Status: Locked
- USB Config: mtp,conn_gadget,adb
- Service Provider: TMB/SPR
- Request Model Info : OK

 

[GsmToto]

Operation: Patch Certificate [ROOT]
Selected model: SM-A325N
Software version: 45.14

Waiting ADB device... OK
Reading phone info... OK
Reading IMEI... OK
Model: SM-A325N
Android version: 13
PDA version: A325NKSU3DWE6
CSC version: A325NOKR3DWE6
Phone version: A325NKOU3DWW2
Product code: SM-A325NLVALUA
CSC country code: KOREA
CSC sales code: LUC
Carrier ID: LUC
Phone SN: RF9R901J2ES
IMEI: 35xxxxxxxxxxxx
HW version: MP 0.200
RF cal date: 20210919
Chip name: MT6769T
Modem board: MT6765
Security patch: 2023-05-01
Boot Warranty bit: 1
SIM State: ABSENT OK
Reading IMEI... OK
Checking Super user right... true
Root version: 26.1:MAGISKSX
Searching server... OK
Waiting for server answer... OK
Checking data... OK
Reading 'boot' image... OK
Loading data from 'boot'... OK
Reading 'modem' image... OK
Loading data from 'modem'... OK
Preparation of data... OK
Patching... OK
Rebooting phone... OK

 

[GsmToto]

Operation: Unlock
Selected model: SM-A300FU
Selected port: COM3 SAMSUNG Mobile USB Serial Port
Software version: 45.14

Reading phone info...
Reading IMEI... OK
IMEI: 359XXXXXXXXXXXXX
Unlocking... OK
Reseting... OK
Unlock done

Done with Samsung Tool PRO v.45.14 [SM-A300FU,Unlock]

 

[GsmToto]

Operation: Read Codes via Server [UPLOAD 2021]
Selected model: SM-G960F
Software version: 45.14

Checking Login and Password... OK
Balance: 14 crd.
You have 14 credit(s) left. This operation takes 8 credits. Attention! In case if phone asking MCK(Freeze, PUK) code, using this method will consume credits twice - first for MCK(Freeze, PUK) code and then for NCK(Network, PIN). Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G960F
Android version: 10
PDA version: G960FXXSEFUA1
CSC version: G960FOVFEFUA1
Phone version: G960FXXSEFUA1
Product code: SM-G960FZPAVOD
CSC country code: UK
CSC sales code: VOD
Carrier ID: VOD
Phone SN: 23d9f9b72b037ece
IMEI: 359664095666467
HW version: MP 0.900
RF cal date: 20180907
Chip name: EXYNOS9810
Modem board: SHANNON360
Security patch: 2021-02-01
Boot Warranty bit: 0
SIM State: ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Checking SIM status... OK
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading lock state... OK
Executing... OK
Searching Ramdump interface... COM11 detected
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Reading ramdump data from phone... OK
Calculating... OK
Now only the MCK(Freeze, PUK) code will be calculated. Continue? Yes
Searching server... OK
Waiting for server answer... OK
Freeze code (MCK, PUK): 05936192

To calculate NCK(Network, PIN, REGIONAL) code perfom the following operations:
1. Insert the SIM card.
2. Enter the MCK(Freeze, PUK) code.
3. Remove the SIM card.
4. Reboot phone.
5. Try again.

 

[GsmToto]

Waiting ADB device... OK
Reading phone info... OK
Reading IMEI... OK
Model: SM-A127F
Android version: 13
PDA version: A127FXXU7CVL4
CSC version: A127FOJM7CVL4
Phone version: A127FXXU7CVL4
Product code: SM-A127FZKGMIS
CSC country code: Iraq
CSC sales code: MID
Carrier ID: MID
Phone SN: RZ8RB0SS4DT
IMEI: 358765876111549
HW version: REV1.0
RF cal date: 20211113
Chip name: EXYNOS853
Modem board: SHANNON313
Security patch: 2022-11-01
Boot Warranty bit: 1
SIM State: LOADED,ABSENT OK
Reading IMEI... OK
Checking Super user right... true
Root version: 26.3:MAGISKSV
Checking data... OK
Searching server... OK
Checking server answer... modem required
There is no information about this firmware on the server.

Done with Samsung Tool PRO v.45.14 [SM-A127F,Patch Certificate]

 

[GsmToto]

Waiting ADB device... OK
Reading phone info...
Model: SM-G980F
Android version: 11
PDA version: G980FXXSCDUJ3
CSC version: G980FOXMCDUJ3
Phone version: G980FXXSCDUJ3
Product code: SM-G980FZI8WWB
CSC country code: Switzerland
CSC sales code: WWD
Carrier ID: WWD
Phone SN: RF8N124NTWC
IMEI: 3569XXXXXXXXXXXXX
HW version:
RF cal date:
Chip name: EXYNOS990
Modem board: SHANNON5126
Security patch: 2021-11-01
Boot Warranty bit: 1
SIM State: LOADED,ABSENT
Checking Super user right... true
Root version: 8dfb30fe:MAGISKSX
Checking data... OK
Searching server... OK
Checking server answer... OK
Data preparation... OK
Searching server... OK
Waiting for server answer... OK
Patching... OK
Rebooting phone... OK

 

[GsmToto]

Operation: Read Codes via Server
Selected model: SM-G935A
Software version: 45.14

Checking Login and Password... OK
Balance: 25 crd.
You have 25 credit(s) left. This operation takes 5 credits. Continue? Yes
Waiting for device to become ready... OK
Reading phone info...
Model: SAMSUNG-SM-G935A
Android version: 8.0.0
PDA version: G935AUCUBCTB1
CSC version: G935AATTBCTB1
Phone version: G935AUCUBCTB1
Product code: SM2G935AZKAATT
CSC country code: USA
CSC sales code: ATT
Carrier ID: ATT
Phone SN: RF8J420CNGB
IMEI: 352329082150944
HW version: REV0.7
RF cal date: 2017.04.19
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2019-12-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM175
Reading phone info... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Executing... OK
Searching Ramdump interface... COM13 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code(MCK, PUK): 96291802
NET lock: 95963590
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.45.14 [SM-G935A,Read Codes via Server]

 

[GsmToto]

Waiting ADB device... OK
Reading phone info...
Model: SM-G980F
Android version: 11
PDA version: G980FXXSCDUJ3
CSC version: G980FOXMCDUJ3
Phone version: G980FXXSCDUJ3
Product code: SM-G980FZI8WWX
CSC country code: Switzerland
CSC sales code: WWD
Carrier ID: WWD
Phone SN: RF8N124NTWR
IMEI: 3569XXXXXXXXXX
HW version:
RF cal date:
Chip name: EXYNOS990
Modem board: SHANNON5126
Security patch: 2021-11-01
Boot Warranty bit: 1
SIM State: LOADED,ABSENT
Checking Super user right... true
Root version: 8dfb30fe:MAGISKSQ
Checking data... OK
Searching server... OK
Checking server answer... OK
Data preparation... OK
Searching server... OK
Waiting for server answer... OK
Patching... OK
Rebooting phone... OK

magisk 27.0, no sim in progress repair

 

[GsmToto]

Operation: Unlock
Selected model: SM-N986U
Software version: 45.14

Checking Login and Password... OK
Balance: 25 crd.
You have 25 credit(s) left. This operation takes 5 credits. Continue? Yes
Waiting ADB device... OK
Reading phone info... OK
Reading IMEI... OK
Model: SM-N986U
Android version: 13
PDA version: N986USQU3GVK3
CSC version: N986UOYN3GVK3
Phone version: N986USQU3GVK3
Product code: SM2N986UZNATMN
CSC country code: USA
CSC sales code: TMB
Carrier ID: TMB
Phone SN: R3CR801H0XR
IMEI: 3583XXXXXXXXXXXXXXXX
HW version: REV1.0
RF cal date: 2021.08.03
Chip name: SM8250
Modem board: SDX55M
Security patch: 2022-11-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED,NOT_READY