Legitunlocks.com
IC Chip

Post Success Reports Here Successfully Repaired/Dead Recovered Handset By Ufi Box

Deepesh Sharma

Deepesh Sharma

Friend's Martview
Apr 4, 2017
1,712
3,157
India
Sonork ID
100.1614172
Samsung J7 Prime Water Logged Set Dead Recovered Done With Ufi-Box
Samsung J7 Prime(G610F) Water Logged Set Alive 1st Change Power ic, Charging ic, Network Ic

Set Not Alive After Connect Isp Connection With Ufi-BOx

Ufi-Box Log+Repair/Reprogram Emmc

Set Alive After Emmc Repair
 
  • Like
Reactions: ma-telecom, sohang kumar, Martview and 2 others
Warrior4850

Warrior4850

Junior Member
Feb 16, 2019
1
1
[QUOTE = "Дипеш Шарма, должность: 25251, участник: 15883"] Samsung Tab-3Neo Dead Recovery выведите [Make Dead Port-Emei] и замените Emmc All Job DOne
Samsung T-111 делает мертвый порт EMEI исправить и заменить Emmc SanDisk на Samsung Все работы успешно выполнены с Ufi Box
Мертвый порт

Образ

Написать дамп

Log-Info

Успешно восстановиться в режиме восстановления


Теперь телефон восстановлен
[/ QUOTE]
Нужен дамп "Samsung SM-T110", на поддержке есть только SM-T111. Когда я прошиваю их с помощью Emmc, телефон переходит в режим загрузки, мигает, но висит на заставке, помогите пожалуйста с дампом.
 
  • Like
Reactions: abo anas zayan
S

SahilOfficial

Active Member
Aug 8, 2018
16
4
India
Karbonn Aura 4g Dead Recover Done with UFI.
Connecting to Download port...
Make sure battery is fully charged before flashing !!!
Power off the phone, Disconnect and reconnect the battery(if possible), Hold the VOL DOWN or VOL UP+DOWN and connect USB cable
Scanning Download port... Done.
Detected SPRD U2S Diag (COM3)
Connection status: EHCI:HUB:USB 2.0 High-Speed
USB Driver: [DriverCoding Corporation] sprdvcom, version: 2.0.0.131, date: 3-4-2015
Boot id: SPRD3
Sending FDL ... Done.
Boot version: Spreadtrum Boot Block version 1.1
Change baudrate to 460800 ... Done.
Sending NAND_FDL ... Done.

Reading prodnv, size: 5 MiB... Done.
Reading miscdata, size: 1 MiB... Done.
Repartitioning ... Done.
Downloading prodnv, size: 5 MiB... Done.
Downloading miscdata, size: 1 MiB... Done.
Erasing uboot... Done.
Downloading splloader, size: 31 KiB... Done.
Downloading l_modem, size: 16.02 MiB... Done.
Downloading l_ldsp, size: 1.50 MiB... Done.
Downloading l_gdsp, size: 2.88 MiB... Done.
Downloading l_warm, size: 1.79 MiB... Done.
Downloading pm_sys, size: 20.99 KiB... Done.
Downloading wcnfdl, size: 7.12 KiB... Done.
Downloading wcnmodem, size: 1.22 MiB... Done.
Downloading boot, size: 11.48 MiB... Done.
Downloading recovery, size: 12.22 MiB... Done.
Downloading system, size: 1.90 GiB... Done.
Downloading userdata, size: 10.19 MiB... Done.
Downloading logo, size: 901.05 KiB... Done.
Downloading fbootlogo, size: 901.05 KiB... Done.
Downloading cache, size: 5.22 MiB... Done.
Downloading persist, size: 2 MiB... Done.
Downloading sysinfo, size: 5 MiB... Done.
Downloading uboot, size: 493.05 KiB... Done.

Completed in 32 mins 2.833 s
 
  • Like
Reactions: Martview and Deepesh Sharma
ilyasrao

ilyasrao

Active Member
Nov 15, 2016
37
25
HUAWEI SCL-U31
HS-USB QDLoader 9008 DEAD RECOVERED

Firmware package: Huawei.Y6.SCL-U31C900B130.5.1.1.qcom.9008.msm8909
Scanning for Qualcomm HS-USB QDLoader 9008 device...
Download Port: Qualcomm HS-USB QDLoader 9008 (COM28)
Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
USB Driver: [Qualcomm Incorporated] qcusbser, version: 2.1.2.0, date: 7-8-2015
Initializing...
MSM Serial number: 0x02bce39e
MSM HW ID: 0x009600e1 (MSM8x09)
OEM Public Key Hash: 0xcc3153a80293939b90d02d3bf8b23e0292e452fef662c74998421adad42a380f
SBL SW version: 0
Firehose: prog_emmc_firehose_8909_ddr.mbn
sha1: d96ada9cc47bec34c3af6a3b54d6a73466660dcb, size: 273.20 KiB
QC_IMAGE_VERSION: BOOT.BF.3.1.2.C2-00014
IMAGE_VARIANT: DAADANAZA
OEM_IMAGE_VERSION: sw-PC
Sending firehose loader... Done.
Handshaking...
Sending ping... Done.
Sending configurations...
TargetName: 8909
MemoryName: eMMC
Version: 1
Firehose configured.
Storage type: eMMC
Capacity: 7.29 GiB(7,830,765,568 bytes)
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
Erasing userarea... Done.
Processing rawprogram0.xml
Writing gpt_main0 at 0x00000000 (34 sectors)... Done.
Writing sbl1 at 0x00004400 (1024 sectors)... Done.
Writing hyp at 0x00084400 (1024 sectors)... Done.
Writing sec at 0x00400000 (64 sectors)... Done.
Writing DDR at 0x00408000 (64 sectors)... Done.
Writing rpm at 0x00800000 (1024 sectors)... Done.
Writing tz at 0x00880000 (1024 sectors)... Done.
Writing aboot at 0x00900000 (10112 sectors)... Done.
Writing pad at 0x00DF0000 (2048 sectors)... Done.
Writing oeminfo at 0x00EF0000 (131072 sectors)... Done.
Writing misc at 0x04EF0000 (8192 sectors)... Done.
Writing modemst1 at 0x052F0000 (8192 sectors)... Done.
Writing modemst2 at 0x056F0000 (8192 sectors)... Done.
Writing fsg at 0x05C00000 (8192 sectors)... Done.
Writing modem at 0x06000000 (409600 sectors)... Done.
Writing fsc at 0x12800000 (2 sectors)... Done.
Writing ssd at 0x12800400 (16 sectors)... Done.
Writing log at 0x12802400 (131072 sectors)... Done.
Writing persist at 0x16C00000 (16384 sectors)... Done.
Writing boot at 0x17400000 (131072 sectors)... Done.
Writing recovery at 0x1B400000 (98304 sectors)... Done.
Writing erecovery at 0x1E400000 (98304 sectors)... Done.
Writing cache at 0x21400000 (524288 sectors)... Done.
Writing cust at 0x31400000 (524288 sectors)... Done.
Writing system at 0x41400000 (3670016 sectors)... Done.
Reset power ... Done.
Flashing completed in 2 mins 32.543 s
 
  • Like
Reactions: Martview, Admin and Deepesh Sharma
You must log in or register to reply here.
Top