Legitunlocks.com
Martview MS-2D 2D Screwdriver

Post Success Reports Here Successfully Repaired/Dead Recovered Handset By Ufi Box

S

Svmobiles

Junior Member
Oct 11, 2018
3
5
Dr.sunilsingh said:
OPPO F11 PRO ( CPH1969 ) Remove Userlocks+Frp Lock Done Without Any Risk Of Stuck On Logo All Job Successfully Done Ufi-Box Only
:Y:

OPPO F11 PRO ( CPH1969 ) ISP PINOUT







User lock Full Info....



Remove User lock Full Info....



:S: Successfully Remove All Lock Handset Working Fine With Out Any Risk :Y:









Dr.Research-Center-Team
Click to expand...


Good job bro
 
  • Like
Reactions: Mohan Das
ferouzkassim

ferouzkassim

Active Member
Oct 11, 2018
51
34
Uganda
Skype
ferouz_kassim
oppo f7 userlock new security reset by test point

AUTH info: MTK, version: 1
BROM version[1]: 7.1817.3.0
Loading DA: MTK_AllInOne_DAA[0].bin (790.91 KiB)
version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL UP to force MediaTek BootROM.
Scanning BootROM or Preloader port... Done.
Detected MediaTek USB Port_V1632 (COM10)
Connection status: XHCI:HUB3:USB 2.0 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2015
Connecting Bootrom... Done.
Sending Download Agent... Done.
Platform: MT6771, Hw ver: 0xCA00, Sw ver: 0x0000
Secure ver: 0x00, BL ver: 0x00
Secure config: 0x00
SRAM size: 256 KiB
DRAM size: 3 GiB
SOC ID: faad29f0c38f797047ef5e058cbd70d9ffa7f858eeef84ed4a5b84b1dd8ddec2
ME ID: 3d4a9f7d729cff477c1aa8b0a46f4ed7
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x90 (SK Hynix)
Product name: HCG8a4 (0x484347386134), rev: 0xA2, serial number: 0x4843D2E0
Manufacturing date: Jan 2018
CID: 90014A48 43473861 34A24843 D2E015F3
Capacity: 58.25 GiB(62,549,655,552 bytes)
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
USB speed: High-Speed

platform: MT6771, cpu abi: arm64-v8a
manufacturer: OPPO
board: oppo6771_17331, name: CPH1819
brand: OPPO, model: CPH1819(OPPO F7)
build id: O11019, version: 8.1.0 Oreo (CPH1819EX_11_A.30_190420)
build description: full_oppo6771_17331-user 8.1.0 O11019 1555777454 release-keys

imei[1]: 868476032270749
imei[2]: 868476032270749
crypto state: encrypted




AUTH info: MTK, version: 1
BROM version[1]: 7.1817.3.0
Loading DA: MTK_AllInOne_DAA[0].bin (790.91 KiB)
version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL UP to force MediaTek BootROM.
Scanning BootROM or Preloader port... Done.
Detected MediaTek USB Port_V1632 (COM10)
Connection status: XHCI:HUB3:USB 2.0 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2015
Connecting Bootrom... Done.
Sending Download Agent... Done.
Platform: MT6771, Hw ver: 0xCA00, Sw ver: 0x0000
Secure ver: 0x00, BL ver: 0x00
Secure config: 0x00
SRAM size: 256 KiB
DRAM size: 3 GiB
SOC ID: faad29f0c38f797047ef5e058cbd70d9ffa7f858eeef84ed4a5b84b1dd8ddec2
ME ID: 3d4a9f7d729cff477c1aa8b0a46f4ed7
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x90 (SK Hynix)
Product name: HCG8a4 (0x484347386134), rev: 0xA2, serial number: 0x4843D2E0
Manufacturing date: Jan 2018
CID: 90014A48 43473861 34A24843 D2E015F3
Capacity: 58.25 GiB(62,549,655,552 bytes)
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
USB speed: High-Speed


Factory reset...
Creating filesystem... Done.
Writing cache... Done.
Creating filesystem... Done.
Writing userdata... Done.


AUTH info: MTK, version: 1
BROM version[1]: 7.1817.3.0
Loading DA: MTK_AllInOne_DAA[0].bin (790.91 KiB)
version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL UP to force MediaTek BootROM.
Scanning BootROM or Preloader port... Done.
Detected MediaTek USB Port_V1632 (COM10)
Connection status: XHCI:HUB3:USB 2.0 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2015
Connecting Bootrom... Done.
Sending Download Agent... Done.
Platform: MT6771, Hw ver: 0xCA00, Sw ver: 0x0000
Secure ver: 0x00, BL ver: 0x00
Secure config: 0x00
SRAM size: 256 KiB
DRAM size: 3 GiB
SOC ID: faad29f0c38f797047ef5e058cbd70d9ffa7f858eeef84ed4a5b84b1dd8ddec2
ME ID: 3d4a9f7d729cff477c1aa8b0a46f4ed7
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x90 (SK Hynix)
Product name: HCG8a4 (0x484347386134), rev: 0xA2, serial number: 0x4843D2E0
Manufacturing date: Jan 2018
CID: 90014A48 43473861 34A24843 D2E015F3
Capacity: 58.25 GiB(62,549,655,552 bytes)
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
USB speed: High-Speed

Erasing frp [0x07C88000-0x07D87FFF]... Done.

Completed in 25.923 s
 
ferouzkassim

ferouzkassim

Active Member
Oct 11, 2018
51
34
Uganda
Skype
ferouz_kassim
oppo r15 chinese model password remove done(ufi emmc) with no risk

Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4224
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... CLK not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: 3V6CMB (0x335636434d42), rev: 0x02, serial number: 0xD31CC817
Manufacturing date: Mar 2018
CID: 15010033 5636434D 4202D31C C81735B8
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 116.48 GiB(125,069,950,976 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
EXT_CSD backup saved to "\\%BACKUPS%\3V6CMB_D31CC817.ext_csd"

ANDROID System Info:
platform: sdm660, cpu abi: arm64-v8a
manufacturer: OPPO
board: sdm660, name: PAAM00
brand: OPPO, model: OPPO PAAM00(OPPO R15 梦镜版)
build id: OPM1.171019.011, version: 8.1.0 Oreo (PAAM00_11_A.21_181205)
build description: sdm660_64-user 8.1.0 OPM1.171019.011 eng.root.20181205.154632 dev-keys

crypto state: encrypted?
Custom moviNAND command is not supported for this device(MMC51).
Detected: SAMSUNG moviNAND KM3V6000CM-BXXX/128G



Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4224
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... CLK not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: 3V6CMB (0x335636434d42), rev: 0x02, serial number: 0xD31CC817
Manufacturing date: Mar 2018
CID: 15010033 5636434D 4202D31C C81735B8
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 116.48 GiB(125,069,950,976 bytes)

Factory Reset...
Creating filesystem... Done.
Writing cache... Done.
Creating filesystem... Done.
Writing userdata... Done.
Done.
 
  • Like
Reactions: bronce
ferouzkassim

ferouzkassim

Active Member
Oct 11, 2018
51
34
Uganda
Skype
ferouz_kassim
oppo f7 new security password remove and frp done by test point

AUTH info: MTK, version: 1
BROM version[1]: 7.1817.3.0
Loading DA: MTK_AllInOne_DAA[0].bin (790.91 KiB)
version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL UP to force MediaTek BootROM.
Scanning BootROM or Preloader port... Done.
Detected MediaTek USB Port_V1632 (COM10)
Connection status: XHCI:HUB3:USB 2.0 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2015
Connecting Bootrom... Done.
Sending Download Agent... Done.
Platform: MT6771, Hw ver: 0xCA00, Sw ver: 0x0000
Secure ver: 0x00, BL ver: 0x00
Secure config: 0x00
SRAM size: 256 KiB
DRAM size: 3 GiB
SOC ID: faad29f0c38f797047ef5e058cbd70d9ffa7f858eeef84ed4a5b84b1dd8ddec2
ME ID: 3d4a9f7d729cff477c1aa8b0a46f4ed7
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x90 (SK Hynix)
Product name: HCG8a4 (0x484347386134), rev: 0xA2, serial number: 0x4843D2E0
Manufacturing date: Jan 2018
CID: 90014A48 43473861 34A24843 D2E015F3
Capacity: 58.25 GiB(62,549,655,552 bytes)
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
USB speed: High-Speed

platform: MT6771, cpu abi: arm64-v8a
manufacturer: OPPO
board: oppo6771_17331, name: CPH1819
brand: OPPO, model: CPH1819(OPPO F7)
build id: O11019, version: 8.1.0 Oreo (CPH1819EX_11_A.30_190420)
build description: full_oppo6771_17331-user 8.1.0 O11019 1555777454 release-keys

imei[1]: 868476032270749
imei[2]: 868476032270749
crypto state: encrypted




AUTH info: MTK, version: 1
BROM version[1]: 7.1817.3.0
Loading DA: MTK_AllInOne_DAA[0].bin (790.91 KiB)
version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL UP to force MediaTek BootROM.
Scanning BootROM or Preloader port... Done.
Detected MediaTek USB Port_V1632 (COM10)
Connection status: XHCI:HUB3:USB 2.0 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2015
Connecting Bootrom... Done.
Sending Download Agent... Done.
Platform: MT6771, Hw ver: 0xCA00, Sw ver: 0x0000
Secure ver: 0x00, BL ver: 0x00
Secure config: 0x00
SRAM size: 256 KiB
DRAM size: 3 GiB
SOC ID: faad29f0c38f797047ef5e058cbd70d9ffa7f858eeef84ed4a5b84b1dd8ddec2
ME ID: 3d4a9f7d729cff477c1aa8b0a46f4ed7
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x90 (SK Hynix)
Product name: HCG8a4 (0x484347386134), rev: 0xA2, serial number: 0x4843D2E0
Manufacturing date: Jan 2018
CID: 90014A48 43473861 34A24843 D2E015F3
Capacity: 58.25 GiB(62,549,655,552 bytes)
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
USB speed: High-Speed


Factory reset...
Creating filesystem... Done.
Writing cache... Done.
Creating filesystem... Done.
Writing userdata... Done.


AUTH info: MTK, version: 1
BROM version[1]: 7.1817.3.0
Loading DA: MTK_AllInOne_DAA[0].bin (790.91 KiB)
version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL UP to force MediaTek BootROM.
Scanning BootROM or Preloader port... Done.
Detected MediaTek USB Port_V1632 (COM10)
Connection status: XHCI:HUB3:USB 2.0 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2015
Connecting Bootrom... Done.
Sending Download Agent... Done.
Platform: MT6771, Hw ver: 0xCA00, Sw ver: 0x0000
Secure ver: 0x00, BL ver: 0x00
Secure config: 0x00
SRAM size: 256 KiB
DRAM size: 3 GiB
SOC ID: faad29f0c38f797047ef5e058cbd70d9ffa7f858eeef84ed4a5b84b1dd8ddec2
ME ID: 3d4a9f7d729cff477c1aa8b0a46f4ed7
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x90 (SK Hynix)
Product name: HCG8a4 (0x484347386134), rev: 0xA2, serial number: 0x4843D2E0
Manufacturing date: Jan 2018
CID: 90014A48 43473861 34A24843 D2E015F3
Capacity: 58.25 GiB(62,549,655,552 bytes)
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
USB speed: High-Speed

Erasing frp [0x07C88000-0x07D87FFF]... Done.

Completed in 25.923 s
 
  • Like
Reactions: Deepesh Sharma
msibashankar

msibashankar

Product Supporter
Sep 27, 2017
348
1,562
india
PayPal:

Donate money to this user
OPPO (cph1911)F11 pattern unlock and isp pinout by ufi box ⬇️ oppo cph1911 f11 test point by #ssm
OPPO (cph1911)F11 pattern unlock and isp pinout by ufi box ⬇️ oppo cph1911 f11 test point by #ssm
 
  • Like
Reactions: Deepesh Sharma
msibashankar

msibashankar

Product Supporter
Sep 27, 2017
348
1,562
india
PayPal:

Donate money to this user
Realme C2 , Oppo A1k isp pinout lock remove by ufi box this isp pinout support oppo a1k

Realme C2 , Oppo A1k isp pinout lock remove by ufi box this isp pinout support oppo a1k

 
You must log in or register to reply here.
Top