UMT Post Here Sucessfully Unlocked/Repair Phones With Umt Tool

[niloy2007]

Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM398 : SAMSUNG Mobile USB Modem #222
Checking for Device... Found [Normal Mode]
Reading Phone Information... OK
Model: SM-J210F
IMEI: 355372093273468
Software: J210FDDU0ARL1/J210FODD0ARL1/J210FXXU0ARH1/J210FDDU0ARL1
Init Download Mode... OK
Port: COM15 : SAMSUNG Mobile USB Modem #4
Reading Data from Phone... Done
Chipset: SPRD8735 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done

 

[niloy2007]

Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM15 : SAMSUNG Mobile USB Modem #4
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: SPRD8735 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 00:24
[Ultimate Samsung Flasher v1.4]

 

[niloy2007]

Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM389 : SAMSUNG Mobile USB Modem #217
Checking for Device... Found [Normal Mode]
Reading Phone Information... OK
Model: SM-J210F
IMEI: 354175085936831
Software: J210FXXU0ARI4/J210FODD0ARI7/J210FXXU0ARH1/J210FXXU0ARI4
Init Download Mode... OK
Port: COM15 : SAMSUNG Mobile USB Modem #4
Reading Data from Phone... Done
Chipset: SPRD8735 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 01:13
[Ultimate Samsung Flasher v1.4]

 

[niloy2007]

Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM15 : SAMSUNG Mobile USB Modem #4
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: LSI3475 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 00:26
[Ultimate Samsung Flasher v1.4]

 

[niloy2007]

Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM15 : SAMSUNG Mobile USB Modem #4
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: LSI3475 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 00:27
[Ultimate Samsung Flasher v1.4]

 

[niloy2007]

Device:
Operation: Reset FRP
Searching for Device... Found
Model: SM-A105F
Baseband: A105FXXU1ASBJ,A105FXXU1ASBJ
Bootloader: A105FXXU1ASB6
PDA: FA90_A105FXXU1ASB6
Android Version: 9
Resetting FRP Lock... Done
---------------- IMPORTANT ----------------
Accept Agreement on phone to enter Home Screen.
Goto Menu > Settings > Backup and Reset > Factory data reset.
Operation Finished.
Elapsed Time: 00:12
[Ultimate Samsung Flasher v1.4]

 

[niloy2007]

Device: Any Samsung
Operation: Flash Firmware
Port: COM15 : SAMSUNG Mobile USB Modem #4
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: LSI7880 [HiSpeed]
Sending Partition [BOOTLOADER]... Done
Sending Partition [PARAM]... Done
Sending Partition [CM]... Done
Sending Partition [NAD_FW]... Done
Sending Partition [NAD_REFER]... Done
Sending Partition [BOOT]... Done
Sending Partition [RECOVERY]... Done
Sending Partition [DTB]... Done
Sending Partition [DTBO]... Done
Sending Partition [VENDOR]... Done
Sending Partition [USERDATA]... Done
Sending Partition [VBMETA]... Done
Sending Partition [RADIO]... Done
Sending Partition [CP_DEBUG]... Done
Sending Partition [CACHE]... Done
Sending Partition [PRODUCT]... Done
Closing Session... Done
Operation Finished.
Elapsed Time: 02:52
[Ultimate Samsung Flasher v1.4]

 

[niloy2007]

Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM15 : SAMSUNG Mobile USB Modem #4
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: LSI3475 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 00:29
[Ultimate Samsung Flasher v1.4]

 

[niloy2007]

Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM15 : SAMSUNG Mobile USB Modem #4
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: LSI3475 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 00:28
[Ultimate Samsung Flasher v1.4]

 

[niloy2007]

Device: Any Samsung
Operation: Flash Firmware
Port: COM15 : SAMSUNG Mobile USB Modem #4
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: MSM8937 [HiSpeed]
Sending Partition [ABOOT]... Done
Sending Partition [SBL1]... Done
Sending Partition [RPM]... Done
Sending Partition [TZ]... Done
Sending Partition [DEVCFG]... Done
Sending Partition [APNHLOS]... Done
Sending Partition [CMNLIB]... Done
Sending Partition [KEYMASTER]... Done
Sending Partition [LKSECAPP]... Done
Sending Partition [SEC]... Done
Sending Partition [APDP]... Done
Sending Partition [MSADP]... Done
Sending Partition [BOOT]... Done
Sending Partition [RECOVERY]... Done
Sending Partition [SYSTEM]... Done
Sending Partition [PERSIST]... Done
Sending Partition [USERDATA]... Done
Sending Partition [MODEM]... Done
Sending Partition [DSP]... Done
Sending Partition [CACHE]... Done
Sending Partition [HIDDEN]... Done
Closing Session... Done
Operation Finished.
Elapsed Time: 17:50
[Ultimate Samsung Flasher v1.4]

 

[niloy2007]

Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM119)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 4A [msm8937]
Software : MMB29M, V8.1.2.0.MCCCNDI [Fri Nov 25 22:28:11 CST 2016]
Android Ver. : 6.0.1
Patch Level : 2016-11-01
Preparing Data...Done
Formatting Userdata...Done
Resetting FRP Lock......Done
Operation Finished.

 

[niloy2007]

Operation : Flash
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM119)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Writing [modem.img] -> [modem]...Done
Writing [sbl1.img] -> [sbl1]...Done
Writing [sbl1bak.img] -> [sbl1bak]...Done
Writing [rpm.img] -> [rpm]...Done
Writing [rpmbak.img] -> [rpmbak]...Done
Writing [tz.img] -> [tz]...Done
Writing [tzbak.img] -> [tzbak]...Done
Writing [devcfg.img] -> [devcfg]...Done
Writing [devcfgbak.img] -> [devcfgbak]...Done
Writing [dsp.img] -> [dsp]...Done
Writing [sec.img] -> [sec]...Done
Writing [splash.img] -> [splash]...Done
Writing [aboot.img] -> [aboot]...Done
Writing [abootbak.img] -> [abootbak]...Done
Writing [boot.img] -> [boot]...Done
Writing [recovery.img] -> [recovery]...Done
Writing [system.img] -> [system]...Done
Writing [cache.img] -> [cache]...Done
Writing [persist.img] -> [persist]...Done
Writing [misc.img] -> [misc]...Done
Writing [mdtp.img] -> [mdtp]...Done
Writing [lksecapp.img] -> [lksecapp]...Done
Writing [lksecappbak.img] -> [lksecappbak]...Done
Writing [cmnlib.img] -> [cmnlib]...Done
Writing [cmnlibbak.img] -> [cmnlibbak]...Done
Writing [cmnlib64.img] -> [cmnlib64]...Done
Writing [cmnlib64bak.img] -> [cmnlib64bak]...Done
Writing [keymaster.img] -> [keymaster]...Done
Writing [keymasterbak.img] -> [keymasterbak]...Done
Writing [cust.img] -> [cust]...Done
Writing [userdata.img] -> [userdata]...Done
Writing [PrimaryGPT.bin] -> [PrimaryGPT] ...Done
Writing [BackupGPT.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Resetting device...Done
Operation Finished.

 

[niloy2007]

Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM119)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1507000 [8916] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_014]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8916, eMMC, 16 GB
LU Count : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : OPPO A37f [msm8916]
Software : A37fEX_11_171209, 1480422943 [Sat Dec 9 16:58:03 CST 2017]
Android Ver. : 5.1.1
Patch Level : 2017-12-01
Preparing Data...Done
Formatting Userdata...Done
Resetting FRP Lock......Done
Operation Finished.

 

[niloy2007]

Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM119)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1F00400 [8937] 39A21620
OPK_DATA : FDB379775FEB07C551EFBC01F78CD6ABAC99A2829E6F63768E4491B32485B6E5
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_015]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8937, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : asus ASUS_X00LDA [msm8937]
Software : NMF26F.WW_Phone-14.0400.1708.154-20170824, WW_Phone-14.0400.1708.154-20170824 [Thu Aug 24 20:16:26 CST 2017]
Android Ver. : 7.1.1
Patch Level : 2017-08-01
Resetting FRP Lock......Done
Operation Finished.

 

[niloy2007]

Device : Micromax HS2
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM119)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 05770000
OPK_DATA : FD40BBCA56D6976B0F75F3FED2267721F5AE7166CE06C2F0C237334FFA38A8DC
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917_004]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Micromax Micromax HS2 [msm8937]
Software : MMX_HS2_SW_V6_HW_V1.0_08292017, 1504060315 [Wed Aug 30 10:31:53 CST 2017]
Android Ver. : 7.1.2
Patch Level : 2017-07-01
Resetting FRP Lock......Done
Operation Finished.

 

[niloy2007]

Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM119)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, eMMC, 16 GB
LU Count : 1 [0x01D5A000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi Note 5A [msm8937]
Software : N2G47H, V9.2.5.0.NDFMIEK [Mon Jan 29 20:52:58 WIB 2018]
Android Ver. : 7.1.2
Patch Level : 2018-01-01
Preparing Data...Done
Formatting Userdata...Done
Resetting FRP Lock......Done
Operation Finished.

 

[niloy2007]

Device : Xiaomi Redmi Note 4
Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM119)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 64 GB
LU Count : 1 [0x0747C000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi Note 4 [msm8953]
Software : AL1512-mido-build-20181029184111, V10.1.1.0.NCFMIFI [Mon Oct 29 18:41:09 WIB 2018]
Android Ver. : 7.0
Patch Level : 2018-10-01
Preparing Data...Done
Formatting Userdata...Done
Resetting FRP Lock......Done
Operation Finished.

 

[niloy2007]

Device : Xiaomi Redmi Note 4
Operation : Read Information
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM119)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 64 GB
LU Count : 1 [0x0747C000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi Note 4 [msm8953]
Software : AL1512-mido-build-20181029184111, V10.1.1.0.NCFMIFI [Mon Oct 29 18:41:09 WIB 2018]
Android Ver. : 7.0
Patch Level : 2018-10-01
Operation Finished.

 

[niloy2007]

Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM119)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, eMMC, 16 GB
LU Count : 1 [0x01D5A000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 5A [msm8937]
Software : N2G47H, V9.5.10.0.NCKMIFA [Thu May 24 21:25:16 WIB 2018]
Android Ver. : 7.1.2
Patch Level : 2018-05-01
Preparing Data...Done
Formatting Userdata...Done
Resetting FRP Lock......Done
Operation Finished.

 

[niloy2007]

Operation : Full Reset EFS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM119)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, eMMC, 16 GB
LU Count : 1 [0x01D5A000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 5A [msm8937]
Software : N2G47H, V9.5.9.0.NCKMIFA [Thu May 10 14:40:15 WIB 2018]
Android Ver. : 7.1.2
Patch Level : 2018-04-01
Saving EFS Backup.......OK
EFS Backup : EFS_Xiaomi_Redmi 5A_N2G47H_2018-04-01_181225_115533.ueb
Reset EFS (Full)......Done
Operation Finished.
QcFire Ver. 3.5