UMT Post Here Sucessfully Unlocked/Repair Phones With Umt Tool

[niloy2007]

Device : Xiaomi Redmi Note 5 Pro
Operation : Reset Mi Account
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM31)
Driver Info : Huawei Incorporated, qu_usb_serial.sys, 2.1.1.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1C00C00 [8996] 00000000
OPK_DATA : F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21F65BA3303834E1
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_016]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : MSM8996, eMMC, 64 GB
LU Count : 1 [0x0747C000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 131072, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi Note 5
Software : OPM1.171019.011, V10.0.4.0.OEIMIFH [Thu Nov 1 20:22:32 WIB 2018]
Android Ver. : 8.1.0
Patch Level : 2018-10-01
Resetting Mi Account Data...Done
When phone is completely ON, connect to Internet and add Mi Account.

 

[niloy2007]

Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM31)
Driver Info : HS Corporation, ghsser.sys, 10.2104.1.2
Opening Port...OK
Invalid response from device!
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM31)
Driver Info : HS Corporation, ghsser.sys, 10.2104.1.2
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID : E1C00C00 [8996] 00000000
OPK_DATA : F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21F65BA3303834E1
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_016]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : MSM8996, eMMC, 64 GB
LU Count : 1 [0x0747C000]
Payload Info : In: 262144 [4096], Out: 131072, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi Note 5
Software : OPM1.171019.011, V10.0.4.0.OEIMIFH [Thu Nov 1 20:22:32 WIB 2018]
Android Ver. : 8.1.0
Patch Level : 2018-10-01
Resetting FRP Lock.......Done
Operation Finished.

 

[niloy2007]

Device : Xiaomi Redmi Note 5A
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM119)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1B00600 [8937] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_003]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8937, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi Note 5A [msm8937]
Software : N2G47H, V9.6.2.0.NDKMIFD [Tue Aug 7 22:50:27 WIB 2018]
Android Ver. : 7.1.2
Patch Level : 2018-07-01
Resetting FRP Lock......Done
Operation Finished.

 

[niloy2007]

Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM119)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1009600 [8909] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [2]
Preparing Loader...Done
Sending Loader [8909_012]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8909, eMMC, 8 GB
LU Count : 1 [0x00E18000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : LYF LS-4503 [msm8909]
Software : LS-4503-S10A_LYF_L11EN_210_160115, fd9d8f9 [Mon Feb 20 10:03:20 CST 2017]
Android Ver. : 5.1.1
Patch Level : 2016-08-01
Preparing Data...Done
Formatting Userdata...Done
Resetting FRP Lock......Done
Operation Finished.

 

[niloy2007]

Device : Xiaomi Mi 5a
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM119)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, eMMC, 16 GB
LU Count : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 5A [msm8937]
Software : N2G47H, V10.1.1.0.NCKMIFI [Mon Oct 29 14:46:26 WIB 2018]
Android Ver. : 7.1.2
Patch Level : 2018-07-01
Resetting FRP Lock......Done
Operation Finished.

 

[niloy2007]

Device : Xiaomi Redmi 2
Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM119)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1507000 [8916] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_014]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8916, eMMC, 16 GB
LU Count : 1 [0x01D5A000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi wt88047 [msm8916]
Software : LMY47V, V9.2.5.0.LHJMIEK [Fri Jan 19 19:49:06 CST 2018]
Android Ver. : 5.1.1
Patch Level : 2017-01-01
Preparing Data...Done
Formatting Userdata...Done
Resetting FRP Lock......Done
Operation Finished.

 

[niloy2007]

Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM119)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1B00600 [8937] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_003]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8937, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 4X [msm8937]
Software : MMB29M, V8.2.12.0.MAMMIEA [Thu Jun 29 20:09:51 WIB 2017]
Android Ver. : 6.0.1
Patch Level : 2017-05-01
Resetting FRP Lock......Done
Operation Finished.

 

[niloy2007]

Operation : Reset Mi Account
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM119)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1B00600 [8937] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_003]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8937, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 4X [msm8937]
Software : MMB29M, V8.2.12.0.MAMMIEA [Thu Jun 29 20:09:51 WIB 2017]
Android Ver. : 6.0.1
Patch Level : 2017-05-01
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.

 

[niloy2007]

Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM119)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1507000 [8916] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_014]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8916, eMMC, 16 GB
LU Count : 1 [0x01D5A000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi wt88047 [msm8916]
Software : LMY47V, V9.2.5.0.LHJMIEK [Fri Jan 19 19:49:06 CST 2018]
Android Ver. : 5.1.1
Patch Level : 2017-01-01
Preparing Data...Done
Formatting Userdata...Done
Resetting FRP Lock......Done
Operation Finished.

 

[niloy2007]

Operation : Flash
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM119)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1400900 [8909] 00010000
OPK_DATA : B517C18F27719B12073B079DA03B65C9C4032207AB17C42F6CD9E5B5C564B015
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8909_043]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8909, eMMC, 4 GB
LU Count : 1 [0x00710000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Writing [NON-HLOS.bin] -> [modem] ...Done
Writing [sbl1.mbn] -> [sbl1] ...Done
Writing [sbl1.mbn] -> [sbl1bak] ...Done
Writing [emmc_appsboot.mbn] -> [aboot] ...Done
Writing [emmc_appsboot.mbn] -> [abootbak] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [rpm.mbn] -> [rpmbak] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [tz.mbn] -> [tzbak] ...Done
Writing [sec.dat] -> [sec] ...Done
Writing [system_1.img] -> [system] ...Done
Writing [system_2.img] -> [system] ...Done
Writing [system_3.img] -> [system] ...Done
Writing [system_4.img] -> [system] ...Done
Writing [system_5.img] -> [system] ...Done
Writing [system_6.img] -> [system] ...Done
Writing [system_7.img] -> [system] ...Done
Writing [system_8.img] -> [system] ...Done
Writing [system_9.img] -> [system] ...Done
Writing [system_10.img] -> [system] ...Done
Writing [system_11.img] -> [system] ...Done
Writing [persist_1.img] -> [persist] ...Done
Writing [usbmsc_1.img] -> [usbmsc] ...Done
Writing [usbmsc_2.img] -> [usbmsc] ...Done
Writing [usbmsc_3.img] -> [usbmsc] ...Done
Writing [usbmsc_4.img] -> [usbmsc] ...Done
Writing [usbmsc_5.img] -> [usbmsc] ...Done
Writing [usbmsc_6.img] -> [usbmsc] ...Done
Writing [usbmsc_7.img] -> [usbmsc] ...Done
Writing [usbmsc_8.img] -> [usbmsc] ...Done
Writing [usbmsc_9.img] -> [usbmsc] ...Done
Writing [usbmsc_10.img] -> [usbmsc] ...Done
Writing [usbmsc_11.img] -> [usbmsc] ...Done
Writing [usbmsc_12.img] -> [usbmsc] ...Done
Writing [usbmsc_13.img] -> [usbmsc] ...Done
Writing [cache_1.img] -> [cache] ...Done
Writing [cache_2.img] -> [cache] ...Done
Writing [cache_3.img] -> [cache] ...Done
Writing [boot.img] -> [boot] ...Done
Writing [recovery.img] -> [recovery] ...Done
Writing [userdata_1.img] -> [userdata] ...Done
Writing [userdata_2.img] -> [userdata] ...Done
Writing [userdata_3.img] -> [userdata] ...Done
Writing [userdata_4.img] -> [userdata] ...Done
Writing [userdata_5.img] -> [userdata] ...Done
Writing [userdata_6.img] -> [userdata] ...Done
Writing [userdata_7.img] -> [userdata] ...Done
Writing [userdata_8.img] -> [userdata] ...Done
Writing [userdata_9.img] -> [userdata] ...Done
Writing [userdata_10.img] -> [userdata] ...Done
Writing [userdata_11.img] -> [userdata] ...Done
Writing [userdata_12.img] -> [userdata] ...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Resetting device...Done
Operation Finished.

 

[niloy2007]

evice : JIO F50Y
Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM119)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1400900 [8909] 00010000
OPK_DATA : B517C18F27719B12073B079DA03B65C9C4032207AB17C42F6CD9E5B5C564B015
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8909_043]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8909, eMMC, 4 GB
LU Count : 1 [0x00710000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : F50Y F50Y [msm8909]
Software : LYF-F50Y-000-01-28-080917, LYF-F50Y-000-01-28-080917 [Fri Sep 8 20:06:33 CST 2017]
Android Ver. : 6.0.1
Patch Level : xxxx-xx-xx
Preparing Data...Done
Formatting Userdata...Failed
Resetting FRP Lock......Done
Operation Finished.

 

[niloy2007]

Operation : Reset FRP
CPU : MT6753
Storage : EMMC
DA : MTK_AllInOne_DA.bin [MTK_AllInOne_DA_v3.3001.2017-12-29.16:29]
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM (Android) (COM20)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Driver: MediaTek Inc., usb2ser.sys, 3.0.1504.0
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : GIONEE
Manufacturer : GIONEE
Model : A1 lite
Prod. Name : A1_lite
Device : GIONEE_SWW1618
Board : A1_lite
Platform : mt6753
Android Ver. : 7.0
Display ID : amigo4.0
Patch Level : 2018-01-05
Userdata is ENCRYPTED
Resetting FRP...
FRP Reset Done.
Disconnect Battery/Cable and Power On Phone.
[Ver. 1.5]

 

[niloy2007]

Brand : Lava
Model : A44
Operation : Reset FRP
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM (Android) (COM20)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Driver: MediaTek Inc., usb2ser.sys, 3.0.1504.0
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : LAVA
Manufacturer : LAVA
Model : LAVA_A44
Prod. Name : LAVA_A44
Device : LAVA_A44
Board : LAVA_A44
Platform : mt6737m
Android Ver. : 7.0
Display OS : LAVA_A44_OS4.0
Display ID : LAVA_A44_S111_20170704
Patch Level : 2017-07-05
Userdata is ENCRYPTED
Resetting FRP...
FRP Reset Done.
Disconnect Battery/Cable and Power On Phone.
[Ver. 1.6]

 

[niloy2007]

Operation : IMEI Reapir [META (Old)]
Checking for existing META ports...
No existing META port found.
Connect powered off phone...
Found MediaTek PreLoader USB VCOM Port (COM20) on COM20
Device Path : \\?\usb#vid_0e8d&pid_2000#5&344161a0&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Rebooting to META mode...
Waiting for phone in META mode...
Found MediaTek USB VCOM (Android) (COM354) on COM354
Device Path : \\?\usb#vid_0bb4&pid_0005#5&344161a0&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Reading Phone Information...
CPU: MT6592, E00
SW Ver.: MOLY.WR8.W1315.MD.WG.MP.V35
Hw Ver.: YULONG92_CWET_KK_HSPA_HW
Reading Data....
Repairing IMEI[1] to 911440752613667....
Repair success
Repairing IMEI[2] to 911440753613666....
Repair success
Operation Finished.
[Ver. 1.6]

 

[niloy2007]

Brand : Tecno
Model : IN1
Operation : Reset FRP
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM Port (COM20)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Driver: MediaTek Inc., usbser.sys, 1.1123.0.0
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : TECNO
Manufacturer : TECNO MOBILE LIMITED
Model : TECNO IN1
Prod. Name : H398
Device : TECNO-IN1
Android Ver. : 8.1.0
Display ID : IN1-H398A-O-181015V237
Patch Level : 2018-10-05
Userdata is ENCRYPTED
Resetting FRP...
FRP Reset Done.
Disconnect Battery/Cable and Power On Phone.
[Ver. 1.8]

 

[niloy2007]

Operation : IMEI Reapir [META (Old)]
Checking for existing META ports...
No existing META port found.
Connect powered off phone...
Found MediaTek PreLoader USB VCOM Port (COM20) on COM20
Device Path : \\?\usb#vid_0e8d&pid_2000#5&344161a0&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Rebooting to META mode...
Waiting for phone in META mode...
Found MediaTek USB VCOM (Android) (COM354) on COM354
Device Path : \\?\usb#vid_0bb4&pid_0005#5&344161a0&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Reading Phone Information...
CPU: MT6572, E01
SW Ver.: MOLY.WR8.W1315.MD.WG.MP.V1.P10
Hw Ver.: HUAQIN72_WE_IBA_JB3_HSPA_HW
Reading Data....
Repairing IMEI[1] to 911363956845192....
Repair success
Repairing IMEI[2] to 911363956946198....
Repair success
Operation Finished.
[Ver. 1.8]

 

[niloy2007]

Brand : Tecno
Model : IN2
Operation : Reset FRP
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM Port (COM20)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Driver: MediaTek Inc., usbser.sys, 1.1123.0.0
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : TECNO
Manufacturer : TECNO MOBILE LIMITED
Model : TECNO IN2
Prod. Name : H391
Device : TECNO-IN2
Android Ver. : 8.1.0
Display ID : IN2-H391A-O-181218V213
Patch Level : 2018-12-05
Userdata is ENCRYPTED
Resetting FRP...
FRP Reset Done.
Disconnect Battery/Cable and Power On Phone.
[Ver. 1.8]

 

[niloy2007]

Port : Fastboot Inteface
Baud Rate : Not Applicable
Device : Motorola
Operation : New FRP Reset
Searching for Device in FastBoot Mode... OK
Reading Phone Information...
Model : XT1686
Boot Ver. : moto-msm8953-C0.92
Baseband : M8953_41.50.07.82R POTTER_INDIADSDS_CUST
Software : Blur_Version.28.201.4.potter.retail.en.US
IMEI : 351892081825353
CPU : MSM8953
RAM : 4GB SAMSUNG LP3 DIE=8Gb M5=01 M6=05 M7=00 M8=5F
EMMC : 32GB SAMSUNG RX14MB RV=08 PV=07 FV=0000000000000007
Setting Factory Mode... OK
Searching Network Interface... Found
Connecting to device... OK
Model : Moto G (5) Plus
Bootloader : 0xC092
Baseband : M8953_41.50.07.82R POTTER_INDIADSDS_CUST
Build : Blur_Version.28.201.4.potter.retail.en.US
Android : 8.1.0
Searching Network Interface... Found
Connecting to device... OK
Model : Moto G (5) Plus
Bootloader : 0xC092
Baseband : M8953_41.50.07.82R POTTER_INDIADSDS_CUST
Build : Blur_Version.28.201.4.potter.retail.en.US
Android : 8.1.0
Resetting FRP... OK
Searching for Device in FastBoot Mode... OK
Removing Factory Mode... OK
Operation Finished.
Elapsed Time: 06:25
[Module Ver. 5.0]

 

[niloy2007]

Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM15 : SAMSUNG Mobile USB Modem #4
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: MSM8916 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done

 

[niloy2007]

Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM400 : SAMSUNG Mobile USB Modem #224
Checking for Device... Found [Normal Mode]
Reading Phone Information... OK
Model: SM-G600FY
IMEI: 359933074981308
Software: G600FYDDU1BQG3/G600FYODD1BQG3/G600FYDDU1BPL1/G600FYDDU1BQG3
Init Download Mode... OK
Port: COM26 : SAMSUNG Mobile USB Modem #6
Reading Data from Phone... Done
Chipset: MSM8916 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done