Post here successfully Unlocked / Repaired / Flashed operations via NCK BOX/Dongle Premium v2

maanarman · Dec 9, 2018

Huawei Y360-u61 Write FF Done

Code:

 Flash files count is :9
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.8.9
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM24)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6582
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+4096Mb) TOSIBA 0x303034474530
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 110100303034474530 : 00000000000000
 EMMC UA SIZE: 0xec000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xec480000       [3.692 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM132)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader saved in firmware directory.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

maanarman · Dec 9, 2018

Oale X2 Read FF Done

Code:

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM64)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: F40122426977696E20 : 00000000000000
 EMMC UA SIZE: 0x1cd000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1cdc00000      [7.215 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM72)
 -Reading GPT Drive OK
 Build ID: LMY47I
 Display ID: LMY47I test-keys
 Version: 5.1
 Build Date: Mon Apr 24 13:46:33 CST 2017
 Model: gxq6580_weg_l
 Brand: alps
 Device: gxq6580_weg_l
 Manufacturer: alps
 Region: US
 Mediatek Version Release: ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000       
 Start processing nvram
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000       
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000       
 Start processing lk ......
 Start processing boot
 Start processing recovery
 Start processing logo ......
 Start processing frp ......
 Reading:  BEGIN: 0x4fa0000        - LEN: 0x100000       
 Start processing nvdata ......
 Reading:  BEGIN: 0x50a0000        - LEN: 0x2000000       
 Start processing secro
 Reading:  BEGIN: 0x9a00000        - LEN: 0x600000       
 Start processing system
 Reading:  BEGIN: 0xa800000        - LEN: 0x60000000     
 Saved to : C:\Users\maanarman\Desktop\TEMP\Android_MTK\firmware_backup\MT6580_EMMC_alps_gxq6580_weg_l_5_1_ALPS_L1_MP6_V2_GXQ6580_WEG_L_P69(2018_12_08_21_34)
 Wait untill phone will start charging.
 All done.

maanarman · Dec 10, 2018

Nokia 3 Format/FRP Remove Done

Code:

Action : Boot Info.
 Selected Nokia:Nokia 3
 Exe version: NCKDongle AndroidMTK 2.5.8.9
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM68)
 Boot mode: Preloader
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 02
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (117Gb+16384Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: 13014E51324A393652 : 00000000000000
 EMMC UA SIZE: 0x3ab400000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3ac000000      [14.688 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM136)
 -Reading GPT Drive OK
 This phone have FRP partition.
 Build ID: O00623
 Display ID: 00WW_3_38D
 Version: 8.0.0
 Build Date: Tue Sep 18 18:56:11 CST 2018
 Model: 00WW
 Brand: Unknown
 Device: Unknown
 Mediatek Version Release: alps-mp-o0.mp1-V3.47_k97v1.64_P9
 IMEI[1]: 356049082572212
 IMEI[2]: 356049082572220
 Wait untill phone will start charging.
 All done.

Code:

Action : Format UserData.
 Selected Nokia:Nokia 3
 Exe version: NCKDongle AndroidMTK 2.5.8.9
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM68)
 Boot mode: Preloader
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 02
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (117Gb+16384Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: 13014E51324A393652 : 00000000000000
 EMMC UA SIZE: 0x3ab400000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3ac000000      [14.688 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM136)
 -Reading GPT Drive OK
 Detecting format adress....wait!
 Starting generic userdata format...!
 Partition: cache  begin: 0x10e000000       length: 0x19000000     
 Partition: userdata  begin: 0x127000000       length: 0x283380000     
 Phone can start slow at first power on
 If phone stuck on logo, perform wipe from recovery.
 First start can take up to 5 min on some phones.
 Wait untill phone will start charging.
 All done.

Code:

 Exe version: NCKDongle AndroidMTK 2.5.8.9
 Selected model: Nokia 3
 Action: Reset FRP
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM68)
 Boot mode: Preloader
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 02
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (117Gb+16384Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: 13014E51324A393652 : 00000000000000
 EMMC UA SIZE: 0x3ab400000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3ac000000      [14.688 GB]
 -Reading GPT Drive OK
 Checking data, wait...
 
 Erasing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 All done.

maanarman · Dec 11, 2018

Qmobile I5i Read FF Done

Code:

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM47)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6582
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+8192Mb) HYNIX 0x483447316404
 EMMC FW VERSION: 05:00:00:00:00:00:00:00
 EMMC CID: 90014A483447316404 : 00000000000000
 EMMC UA SIZE: 0xe9000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9c00000       [3.652 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 Build ID: KOT49H
 Display ID: ALPS.KK1.MP1.V2.10
 Version: 4.4.2
 Build Date: 2015年 01月 26日 星期一 10:56:26 CST
 Model: QMobile i5i
 Brand: QMobile
 Device: QMobile i5i
 Manufacturer: alps
 Region: US
 Mediatek Version Release: ALPS.KK1.MP1.V2.10
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing PRELOADER ......
 Reading:  BEGIN: 0x0              - LEN: 0xc00000       
 Start processing MBR
 Reading:  BEGIN: 0xc00000         - LEN: 0x200           
 Start processing EBR1
 Reading:  BEGIN: 0xc80000         - LEN: 0x200           
 Start processing proinfo
 Reading:  BEGIN: 0xd00000         - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 357760060413810
 IMEI[2] from NVRAM: 357760065413815
 Start processing PROTECT_F
 Reading:  BEGIN: 0x1500000        - LEN: 0xa00000       
 Start processing PROTECT_S
 Reading:  BEGIN: 0x1f00000        - LEN: 0xa00000       
 Start processing UBOOT ......
 Start processing BOOTIMG
 Start processing RECOVERY
 Start processing secro
 Reading:  BEGIN: 0x4980000        - LEN: 0x600000       
 Start processing LOGO ......
 Start processing EBR2
 Reading:  BEGIN: 0x5300000        - LEN: 0x200           
 Start processing system
 Reading:  BEGIN: 0x5d80000        - LEN: 0x4b000000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6582_EMMC_QMobile_QMobile i5i_4_4_2_ALPS_KK1_MP1_V2_10(2018_11_25_20_02)
 Wait untill phone will start charging.
 All done.

maanarman · Dec 11, 2018

Qmobile I6 Metal 2017 FRP Remove Done

Code:

 Action : Format UserData.
 Selected Qmobile:QMobile I6 metal
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x464e58324d42
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 150100464E58324D42 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 -Reading GPT Drive OK
 Detecting format adress....wait!
 Starting generic userdata format...!
 Partition: cache  begin: 0xc9800000        length: 0x10000000     
 Partition: userdata  begin: 0xd9800000        length: 0xf7780000     
 Phone can start slow at first power on
 If phone stuck on logo, perform wipe from recovery.
 First start can take up to 5 min on some phones.
 Wait untill phone will start charging.
 All done.

Code:

 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Selected model: QMobile I6 metal
 Action: Reset FRP
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x464e58324d42
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 150100464E58324D42 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 -Reading GPT Drive OK
 Checking data, wait...
 
 Erasing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 All done.

maanarman · Dec 11, 2018

Qmobile S2 FRP Remove Done

Code:

 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Selected model: ELBRUS
 Action: Reset FRP
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM47)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 90014A483847316505 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 -Reading GPT Drive OK
 Checking data, wait...
 
 Erasing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 All done.

maanarman · Dec 11, 2018

Qmobile Z9 Write Flash Done

Code:

Exe Version: NckDongle Qualcomm Module 0.12.1
Operation: Download
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM70) detected.
Hello received.
HW ID: 00000000E1507000 MSM8916
PK HASH: CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F
Checking database for suitable loader.....
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
CPU: MSM8916
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 14.68 GB  Partitions count: 31
[018DB7DF]Userdata Size: 12.43 GB
[0]Writing: modem Start: 131072 length: 97347
[0]Writing: sbl1 Start: 262144 length: 489
[0]Writing: sbl1bak Start: 263168 length: 489
[0]Writing: aboot Start: 264192 length: 893
[0]Writing: abootbak Start: 266240 length: 893
[0]Writing: rpm Start: 268288 length: 296
[0]Writing: rpmbak Start: 269312 length: 296
[0]Writing: tz Start: 270336 length: 945
[0]Writing: tzbak Start: 271360 length: 945
[0]Writing: hyp Start: 272384 length: 112
[0]Writing: hypbak Start: 273408 length: 112
[0]Writing: misc Start: 282624 length: 1
[0]Writing: splash Start: 284690 length: 5401
[0]Writing: chglogo Start: 305170 length: 5401
[0]Writing: fsg Start: 393280 length: 231
[0]Writing: sec Start: 396352 length: 1
[0]Writing: boot Start: 396384 length: 30301
[0]Writing: system Start: 461920 length: 262160
[0]Writing: system Start: 725032 length: 16
[0]Writing: system Start: 729128 length: 257072
[0]Writing: system Start: 986208 length: 16
[0]Writing: system Start: 990304 length: 258040
[0]Writing: system Start: 1248352 length: 16
[0]Writing: system Start: 1249320 length: 16
[0]Writing: system Start: 1253416 length: 257072
[0]Writing: system Start: 1510496 length: 16
[0]Writing: system Start: 1514592 length: 258040
[0]Writing: system Start: 1772640 length: 16
[0]Writing: system Start: 1773608 length: 16
[0]Writing: system Start: 1777704 length: 257072
[0]Writing: system Start: 2034784 length: 16
[0]Writing: system Start: 2038880 length: 258040
[0]Writing: system Start: 2296928 length: 16
[0]Writing: system Start: 2297896 length: 16
[0]Writing: system Start: 2301992 length: 257072
[0]Writing: system Start: 2559072 length: 16
[0]Writing: system Start: 2563168 length: 258040
[0]Writing: system Start: 2821216 length: 16
[0]Writing: system Start: 2822184 length: 16
[0]Writing: system Start: 2826280 length: 257072
[0]Writing: system Start: 3083360 length: 16
[0]Writing: system Start: 3087456 length: 258040
[0]Writing: system Start: 3345504 length: 16
[0]Writing: system Start: 3349600 length: 258040
[0]Writing: system Start: 3607648 length: 16
[0]Writing: system Start: 3611744 length: 46832
[0]Writing: system Start: 3869792 length: 16
[0]Writing: system Start: 4131936 length: 16
[0]Writing: system Start: 4136032 length: 235128
[0]Writing: system Start: 4371168 length: 30856
[0]Writing: persist Start: 4456448 length: 10200
[0]Writing: cache Start: 4521984 length: 3016
[0]Writing: cache Start: 4784128 length: 16
[0]Writing: cache Start: 4784328 length: 16
[0]Writing: cache Start: 5046272 length: 16
[0]Writing: cache Start: 5049088 length: 8408
[0]Writing: recovery Start: 5111808 length: 30621
[0]Writing: userdata Start: 5636096 length: 10160
[0]Writing: userdata Start: 5898240 length: 16
[0]Writing: userdata Start: 5904328 length: 16
[0]Writing: userdata Start: 6160384 length: 16
[0]Writing: userdata Start: 6164456 length: 258088
[0]Writing: userdata Start: 6428616 length: 16
[0]Writing: userdata Start: 6684672 length: 16
[0]Writing: userdata Start: 6946816 length: 16
[0]Writing: userdata Start: 6952904 length: 16
[0]Writing: userdata Start: 7208960 length: 16
[0]Writing: userdata Start: 7471104 length: 16
[0]Writing: userdata Start: 7477192 length: 16
[0]Writing: userdata Start: 7733248 length: 16
[0]Writing: userdata Start: 7995392 length: 16
[0]Writing: userdata Start: 8001480 length: 16
[0]Writing: userdata Start: 8257536 length: 16
[0]Writing: userdata Start: 8519680 length: 16
[0]Writing: userdata Start: 8781824 length: 16
[0]Writing: userdata Start: 9043968 length: 16
[0]Writing: userdata Start: 9306112 length: 16
[0]Writing: userdata Start: 9568256 length: 16
[0]Writing: userdata Start: 9830400 length: 16
[0]Writing: userdata Start: 10092544 length: 16
[0]Writing: userdata Start: 10354688 length: 16
[0]Writing: userdata Start: 10616832 length: 16
[0]Writing: userdata Start: 10878976 length: 16
[0]Writing: userdata Start: 11141120 length: 16
[0]Writing: userdata Start: 11403264 length: 16
[0]Writing: userdata Start: 11665408 length: 16
[0]Writing: userdata Start: 11927552 length: 16
[0]Writing: userdata Start: 12189696 length: 16
[0]Writing: userdata Start: 12195784 length: 16
[0]Writing: userdata Start: 12451840 length: 16
[0]Writing: userdata Start: 12713984 length: 16
[0]Writing: userdata Start: 12720072 length: 16
[0]Writing: userdata Start: 12976128 length: 16
[0]Writing: userdata Start: 13238272 length: 16
[0]Writing: userdata Start: 13500416 length: 16
[0]Writing: userdata Start: 13762560 length: 16
[0]Writing: userdata Start: 14024704 length: 16
[0]Writing: userdata Start: 14286848 length: 16
[0]Writing: userdata Start: 14548992 length: 16
[0]Writing: userdata Start: 14811136 length: 16
[0]Writing: userdata Start: 15073280 length: 16
[0]Writing: userdata Start: 15335424 length: 16
[0]Writing: userdata Start: 15597568 length: 16
[0]Writing: userdata Start: 15859712 length: 16
[0]Writing: userdata Start: 16121856 length: 16
[0]Writing: userdata Start: 16384000 length: 16
[0]Writing: userdata Start: 16646144 length: 16
[0]Writing: userdata Start: 16908288 length: 16
[0]Writing: userdata Start: 17170432 length: 16
[0]Writing: userdata Start: 17432576 length: 16
[0]Writing: userdata Start: 17694720 length: 16
[0]Writing: userdata Start: 17956864 length: 16
[0]Writing: userdata Start: 18219008 length: 16
[0]Writing: userdata Start: 18481152 length: 16
[0]Writing: userdata Start: 18487240 length: 16
[0]Writing: userdata Start: 18743296 length: 16
[0]Writing: userdata Start: 19005440 length: 16
[0]Writing: userdata Start: 19267584 length: 16
[0]Writing: userdata Start: 19529728 length: 16
[0]Writing: userdata Start: 19791872 length: 16
[0]Writing: userdata Start: 20054016 length: 16
[0]Writing: userdata Start: 20316160 length: 16
[0]Writing: userdata Start: 20578304 length: 16
[0]Writing: userdata Start: 20840448 length: 16
[0]Writing: userdata Start: 21102592 length: 16
[0]Writing: userdata Start: 21364736 length: 16
[0]Writing: userdata Start: 21626880 length: 16
[0]Writing: userdata Start: 21889024 length: 16
[0]Writing: userdata Start: 22151168 length: 16
[0]Writing: userdata Start: 22413312 length: 16
[0]Writing: userdata Start: 22675456 length: 16
[0]Writing: userdata Start: 22937600 length: 16
[0]Writing: userdata Start: 23199744 length: 16
[0]Writing: userdata Start: 23461888 length: 16
[0]Writing: userdata Start: 23724032 length: 16
[0]Writing: userdata Start: 23986176 length: 16
[0]Writing: userdata Start: 24248320 length: 16
[0]Writing: userdata Start: 24510464 length: 16
[0]Writing: userdata Start: 24772608 length: 16
[0]Writing: userdata Start: 25034752 length: 16
[0]Writing: userdata Start: 25296896 length: 16
[0]Writing: userdata Start: 25559040 length: 16
[0]Writing: userdata Start: 25821184 length: 16
[0]Writing: userdata Start: 26083328 length: 16
[0]Writing: userdata Start: 26345472 length: 16
[0]Writing: userdata Start: 26607616 length: 16
[0]Writing: userdata Start: 26869760 length: 16
[0]Writing: userdata Start: 26875848 length: 16
[0]Writing: userdata Start: 27131904 length: 16
[0]Writing: userdata Start: 27394048 length: 16
[0]Writing: userdata Start: 27656192 length: 16
[0]Writing: userdata Start: 27918336 length: 16
[0]Writing: userdata Start: 28180480 length: 16
[0]Writing: userdata Start: 28442624 length: 16
[0]Writing: userdata Start: 28704768 length: 16
[0]Writing: userdata Start: 28966912 length: 16
[0]Writing: userdata Start: 29229056 length: 16
[0]Writing: userdata Start: 29491200 length: 16
[0]Writing: userdata Start: 29753344 length: 16
[0]Writing: userdata Start: 30015488 length: 16
[0]Writing: userdata Start: 30277632 length: 16
[0]Writing: userdata Start: 30281704 length: 4256
[0]Writing: primarygpt Start: 0 length: 34
[0]Writing: backupgpt Start: NUM_DISK_SECTORS-33. length: 33
Applying patch, wait...
Restarting phone.....
*************************************
Log saved: C:\Users\test\Documents\NckDongle\qc_module_Logs\flash_phone_MSM8916_00000000E1507000_CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F5.txt
Total Time: 00:11:11
Done.

maanarman · Dec 11, 2018

Samsung S7582 Read FF Done

Code:

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM47)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6572
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+4096Mb) TOSIBA 0x303034473930
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: 110100303034473930 : 00000000000000
 EMMC UA SIZE: 0xec000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xec480000       [3.692 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 Build ID: H66
 Display ID: IMM76I.S7582ZCAME1
 Version: 4.2.2
 Build Date: Tue Sep  2 12:25:21 CST 2014
 Model: GT-S7582
 Brand: samsung
 Device: h7762
 Manufacturer: Samsung
 Region: US
 Mediatek Version Release: IMM76I.S7562ZCAME1
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing PRELOADER ......
 Reading:  BEGIN: 0x0              - LEN: 0xc00000       
 Start processing MBR
 Reading:  BEGIN: 0xc00000         - LEN: 0x200           
 Start processing EBR1
 Reading:  BEGIN: 0xc80000         - LEN: 0x200           
 Start processing proinfo
 Reading:  BEGIN: 0xd00000         - LEN: 0x300000       
 Start processing nvram
 Start processing PROTECT_F
 Reading:  BEGIN: 0x1500000        - LEN: 0xa00000       
 Start processing PROTECT_S
 Reading:  BEGIN: 0x1f00000        - LEN: 0xa00000       
 Start processing UBOOT ......
 Start processing BOOTIMG
 Start processing RECOVERY
 Start processing secro
 Reading:  BEGIN: 0x3580000        - LEN: 0x40000         
 Start processing LOGO ......
 Start processing system
 Reading:  BEGIN: 0x4340000        - LEN: 0x28a00000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6572_EMMC_samsung_GT-S7582_4_2_2_IMM76I_S7562ZCAME1(2018_10_22_21_01)
 Wait untill phone will start charging.
 All done.

maanarman · Dec 11, 2018

Samsung I8552 Write Flash Done

Code:

 Flash files count is :11
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM47)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6572
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (28Gb+4096Mb) HYNIX 0x2058494e5948
 EMMC FW VERSION: 16:00:00:00:00:00:00:00
 EMMC CID: 90014A2058494E5948 : 00000000000000
 EMMC UA SIZE: 0xe7000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe7600000       [3.615 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader saved in firmware directory.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

maanarman · Dec 15, 2018

Orale X1 Write Flash Done

Code:

 Flash files count is :10
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.8.9
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM64)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 768 MB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+6144Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 43:00:00:00:00:00:00:00
 EMMC CID: 8801034E4361726420 : 00000000000000
 EMMC UA SIZE: 0x1ce100000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1ced00000      [7.231 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM72)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader backup already exist, skip saving.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

maanarman · Dec 15, 2018

Oale X1 Write Flash Done

Code:

 Flash files count is :6
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.8.9
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM24)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: F40122426977696E20 : 00000000000000
 EMMC UA SIZE: 0x1cd000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1cdc00000      [7.215 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM132)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader backup already exist, skip saving.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

maanarman · Dec 19, 2018

Qmobile I5 Write Flash Done

Code:

 Flash files count is :11
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.8.9
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM81)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6582
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+4096Mb) HYNIX 0x483447316404
 EMMC FW VERSION: 05:00:00:00:00:00:00:00
 EMMC CID: 90014A483447316404 : 00000000000000
 EMMC UA SIZE: 0xe9000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9c00000       [3.652 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM210)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader backup already exist, skip saving.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

maanarman · Dec 19, 2018

Oale X2 Write Flash Done

Code:

 Flash files count is :10
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.8.9
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM17)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: F40122426977696E20 : 00000000000000
 EMMC UA SIZE: 0x1cd000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1cdc00000      [7.215 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM731)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader backup already exist, skip saving.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

maanarman · Dec 22, 2018

Huawei Y520 U22 Read FF Done

Code:

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek USB VCOM (Android) (COM1028)
 Boot mode: Brom
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 [emmi]EMMC CID: 484a019064314734a2
 ----------------------------------------------------
 BaseBand CPU :MT6572
 BaseBand CPU Secure Version : 05
 BaseBand CPU Bootloader Version : FE
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+4096Mb) HYNIX 0x483447316404
 EMMC FW VERSION: 03:00:00:00:00:00:00:00
 EMMC CID: 90014A483447316404 : 00000000000000
 EMMC UA SIZE: 0xe9000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9c00000       [3.652 GB]
 Status: USB_FULL_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 Build ID: HUAWEIY520-U22
 Display ID: Y520-U22V100R001C328B107
 Version: 4.4.2
 Build Date: Wed Sep 24 12:35:06 CST 2014
 Brand: HUAWEI
 Model: HUAWEI Y520-U22
 Device: HWY520-U
 Manufacturer: HUAWEI
 Region: US
 Mediatek Version Release: ALPS.KK1.MP6.V1
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing PRELOADER ......
 Reading:  BEGIN: 0x0              - LEN: 0xc00000       
 Start processing MBR
 Reading:  BEGIN: 0xc00000         - LEN: 0x200           
 Start processing EBR1
 Reading:  BEGIN: 0xc80000         - LEN: 0x200           
 Start processing proinfo
 Reading:  BEGIN: 0xd00000         - LEN: 0x300000       
 Start processing nvram
 Start processing PROTECT_F
 Reading:  BEGIN: 0x1500000        - LEN: 0xa00000       
 Start processing PROTECT_S
 Reading:  BEGIN: 0x1f00000        - LEN: 0xa00000       
 Start processing UBOOT ......
 Start processing BOOTIMG
 Start processing RECOVERY
 Start processing secro
 Reading:  BEGIN: 0x3580000        - LEN: 0x40000         
 Start processing LOGO ......
 Start processing ROOTM ......
 Reading:  BEGIN: 0x4340000        - LEN: 0x400000       
 Start processing system
 Reading:  BEGIN: 0x4740000        - LEN: 0x40000000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6572_EMMC_HUAWEI_HUAWEI Y520-U22_4_4_2_ALPS_KK1_MP6_V1(2018_12_19_14_34)
 Wait untill phone will start charging.
 All done.

maanarman · Dec 26, 2018

Oppo A33F Factory Format Done

Code:

Exe Version: NckDongle Qualcomm Module 0.12.1
Operation: Read Info
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM70) detected.
Hello received.
HW ID: 00000000E1507000 MSM8916
PK HASH: CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F
Checking database for suitable loader.....
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
CPU: MSM8916
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 14.56 GB  Partitions count: 37
[0178039F]Userdata Size: 11.75 GB
Manufacturer: OPPO
Cpu: armeabi-v7a
Build Id: LMY47V
Model: A33f
Android Release: 5.1.1
Android Version: A33fEX_11_160926
Config: diag,serial_smd,rmnet_bam,adb
Restarting phone.....
*************************************
Log saved: C:\Users\test\Documents\NckDongle\qc_module_Logs\read_info_MSM8916_00000000E1507000_CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F9.txt
Total Time: 00:00:14
Done.

Code:

Exe Version: NckDongle Qualcomm Module 0.12.1
Operation: Factory Format
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM70) detected.
Hello received.
HW ID: 00000000E1507000 MSM8916
PK HASH: CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F
Checking database for suitable loader.....
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
CPU: MSM8916
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 14.56 GB  Partitions count: 37
[0178039F]Userdata Size: 11.75 GB
[4096]Error untill process partition system
Partition can be encripted or corupted.
Resetting cache , wait
Total blocks 10
Resetting userdata , wait
Total blocks 123
Factory reset done, wait untill phone start
This can take up to 5 min on slow phones.
Restarting phone.....
*************************************
Log saved: C:\Users\test\Documents\NckDongle\qc_module_Logs\reset_userdata_MSM8916_00000000E1507000_CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F22.txt
Total Time: 00:00:23
Done.

maanarman · Dec 27, 2018

Samsung I9060I Read FF Done

Code:

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM47)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6572
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 256 MB  DRAM
 ----------------------------------------------------
 EMMC: (14Gb+2048Mb) SAMSUNG 0x4e3957524d42
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 1501004E3957524D42 : 00000000000000
 EMMC UA SIZE: 0x70000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x70420000       [1.754 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 Build ID: KOT49H
 Display ID: KTU84P.I9060IXMU0AOD2
 Version: 4.4.4
 Build Date: 2015年 09月 09日 星期三 10:13:27 CST
 Model: GT-I9060I
 Brand: samsung
 Device: best72_we_72_lca
 Manufacturer: samsung
 Region: US
 Mediatek Version Release: ALPS.KK1.MP6.V1
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing PRELOADER ......
 Reading:  BEGIN: 0x0              - LEN: 0xc00000       
 Start processing MBR
 Reading:  BEGIN: 0xc00000         - LEN: 0x200           
 Start processing EBR1
 Reading:  BEGIN: 0xc80000         - LEN: 0x200           
 Start processing proinfo
 Reading:  BEGIN: 0xd00000         - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 355795051538623
 IMEI[2] from NVRAM: 355795051538631
 Start processing PROTECT_F
 Reading:  BEGIN: 0x1500000        - LEN: 0xa00000       
 Start processing PROTECT_S
 Reading:  BEGIN: 0x1f00000        - LEN: 0xa00000       
 Start processing UBOOT ......
 Start processing BOOTIMG
 Start processing RECOVERY
 Start processing secro
 Reading:  BEGIN: 0x3580000        - LEN: 0x40000         
 Start processing LOGO ......
 Start processing system
 Reading:  BEGIN: 0x4340000        - LEN: 0x1e800000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6572_EMMC_samsung_GT-I9060I_4_4_4_ALPS_KK1_MP6_V1(2018_12_24_21_48)
 Wait untill phone will start charging.
 All done.

maanarman · Dec 29, 2018

Lenove S668t Read FF Done

Code:

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM47)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6582
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x4b3758564d42
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 1501004B3758564D42 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 Build ID: JDQ39
 Display ID: S668t_S030_141114
 Version: 4.2.2
 Build Date: Fri Nov 14 10:37:05 CST 2014
 Model: Lenovo S668t
 Brand: Lenovo
 Device: S668t
 Manufacturer: Lenovo
 Mediatek Version Release: ALPS.JB5.MP.V1.16
 Manufacturer: LENOVO
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing PRELOADER ......
 Reading:  BEGIN: 0x0              - LEN: 0xc00000       
 Start processing MBR
 Reading:  BEGIN: 0xc00000         - LEN: 0x200           
 Start processing EBR1
 Reading:  BEGIN: 0xc80000         - LEN: 0x200           
 Start processing proinfo
 Reading:  BEGIN: 0xd00000         - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 863526021909031
 IMEI[2] from NVRAM: 863526021909049
 Start processing PROTECT_F
 Reading:  BEGIN: 0x1500000        - LEN: 0xa00000       
 Start processing PROTECT_S
 Reading:  BEGIN: 0x1f00000        - LEN: 0xa00000       
 Start processing UBOOT ......
 Start processing BOOTIMG
 Start processing RECOVERY
 Start processing secro
 Reading:  BEGIN: 0x3580000        - LEN: 0x600000       
 Start processing LOGO ......
 Start processing EBR2
 Reading:  BEGIN: 0x3f00000        - LEN: 0x200           
 Start processing RESV ......
 Reading:  BEGIN: 0x3f80000        - LEN: 0x80000         
 Start processing flex
 Reading:  BEGIN: 0x4000000        - LEN: 0x2800000       
 Start processing system
 Reading:  BEGIN: 0x7200000        - LEN: 0x48000000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6582_EMMC_Lenovo_Lenovo S668t_4_2_2_ALPS_JB5_MP_V1_16(2018_12_25_16_20)
 Wait untill phone will start charging.
 All done.

maanarman · Jan 7, 2019

Oale X1 Write Flash Done

Code:

 Flash files count is :10
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.6
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM47)
 Boot mode: Preloader
 BBCHIP: 6580 0 ca00
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: F40122426977696E20 : 00000000000000
 EMMC UA SIZE: 0x1cd000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1cdc00000      [7.215 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

maanarman · Jan 8, 2019

Oale X2 Read FF Done

Code:

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM47)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: F40122426977696E20 : 00000000000000
 EMMC UA SIZE: 0x1cd000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1cdc00000      [7.215 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 -Reading GPT Drive OK
 Build ID: LMY47I
 Display ID: LMY47I test-keys
 Version: 5.1
 Build Date: Wed Jun 28 21:12:23 CST 2017
 Model: gxq6580_weg_l
 Brand: alps
 Device: gxq6580_weg_l
 Manufacturer: alps
 Region: US
 Mediatek Version Release: ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 354741101566876
 IMEI[2] from NVRAM: 354741101566884
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000       
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000       
 Start processing lk ......
 Start processing boot
 Start processing recovery
 Partition: recovery seems damaged, skip saving..
 Start processing logo ......
 Start processing frp ......
 Reading:  BEGIN: 0x4fa0000        - LEN: 0x100000       
 Start processing nvdata ......
 Reading:  BEGIN: 0x50a0000        - LEN: 0x2000000       
 Start processing secro
 Reading:  BEGIN: 0x9a00000        - LEN: 0x600000       
 Start processing system
 Reading:  BEGIN: 0xa800000        - LEN: 0x60000000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6580_EMMC_alps_gxq6580_weg_l_5_1_ALPS_L1_MP6_V2_GXQ6580_WEG_L_P69(2018_12_18_18_59)
 Wait untill phone will start charging.
 All done.

maanarman · Jan 12, 2019

Lenovo A1010a20 Read Pattern Done

Code:

 Exe version: NCKDongle AndroidMTK 2.5.9.6
 Selected model: Lenovo  A1010a20
 Action: Read Pattern
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM47)
 Boot mode: Preloader
 BBCHIP: 6580 0 ca00
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) HYNIX 0x483847346192
 EMMC FW VERSION: a2:00:00:00:00:00:00:00
 EMMC CID: 90014A483847346192 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 **************************************
 1 2 3
 4 5 6
 7 8 9
 Pattern: 4569
 **************************************
 Pattern HEX: 96B476DCD06D1B58B2DA625E143E49E00B8C0BBF
 **************************************
 Wait untill phone will start charging.
 All done.

Post here successfully Unlocked / Repaired / Flashed operations via NCK BOX/Dongle Premium v2

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview