Post here successfully Unlocked / Repaired / Flashed operations via NCK BOX/Dongle Premium v2

[Abdullah Ali]

Samsung A03 SM-A035F Test Point​

 

[DavydenkoGSM]

FRP MOTO E20

0]Custom loader: RON31_267-94_2303_20230310_user_SIGN_027.loader
First 16 bytes from public rsa key.
BF1D6840606C0659EE56C309D130E4E5
***************
Phone Storage: EMMC
SELECTED: Autodetect by loader
ACTION: Erase FRP
Loader format:NEW
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM15)
Sending loader, keep boot key untill loader start.
Loader send OK
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
Read partition info is supported by loader.
UID: 007415c01031caab
***************
Manufacturer: motorola
Brand: motorola
Device: aruba
Model: moto e20
Build ID: RON31.267-94
CPU arhitecture: armeabi-v7a
Build product name: ums9230_4h10_go
Build description: ums9230_4h10_go_nv-user 11 RON31.267-94 422c8 release-keys
Build Id: RON31.267-94
Android Release: 11
Android Version: RON31.267-94 release-keys
Security patch: 2023-03-05
CPU NAME:
Removing frp, wait...
[1]FRP: persist
Format OK.
[can take 0-10 sec]Wait untill phone restart.
Exe version: NckDongle Spreadtrum Module 2.1.9
Log saved:
C:\Users\hyper\Documents\spreadtrum_module\Saved_Logs\motorola_RON31_267-94_erase_frp.txt
Total Time: 00:00:26
Done.

 

[.::Greed::.]

Direct unlock Done​

---

Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.6.2
Selected phone: MT6580
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM61)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) TOSIBA 0x303034474530
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 11010030303447 : 000000000000000000
EMMC UA SIZE: 0xec000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xec480000 [3.692 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM64)
Block Size: 512
MODEL FROM PROINFO: V300-2BVDAU1
SECRO FROM PROINFO: L3DEFA90BS00
IMEI marker was found in nvram
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:0) Code : 98936188
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
SIM[2]:
Block1(N): Locked (remain:99) Code : 98936188
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Unlocking target...please wait.
Unlock finished.
Wait untill phone will start charging.
All done.

---

If u find my post helpful, press like button ✌​

 

[Newjazzy]

Please I just ordered my nck dongle
Am still looking for the setup please help me with link

 

[Ziggywong0305]

bro see attached link Installers

 

[thongzky08]

Thanks!

 

[Ziggywong0305]

Exe version: NCKBox AndroidMTK 3.0.3
Selected model: 0-By CPU MT6761
Action: Unlock
Detected(23) : MediaTek USB Port (COM23)
[23] \\?\usb#vid_0e8d&pid_0003#5&1da5dfc2&0&11#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[41]META Port Detected: MediaTek USB VCOM (Android) (COM41)
USB\VID_0E8D&PID_200E&MI_01\6&383DC592&0&0001
Start sync target, waiting responce.....
ChipID: MT6761
[MT6761]Using Algo 5
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6761
[META]SW_VER : MOLY.LR12A.R3.MP.V241.4.P4
[META]HW_VER : TK_MD_BASIC_HW
[helio]Read simlock info.
IMEI Location: NVRAM
Phone imei[1] : 357045920435819
Phone imei[2] : 357045920435827
Start direct unlock[SIM1]
Simlock checksum is ok.
Direct unlock done
Start direct unlock[SIM2]
Simlock checksum is ok.
Direct unlock done
Simlock checksum is ok.
Direct unlock done
Simlock checksum is ok.
Direct unlock done
[helio]Wait untill phone will start charging.
[0]All done.

 

[GsmToto]

done after select emmc option
Exe Version: NCK Box / Dongle Premium v2 - Qualcomm 0.13.5
Brand: Samsung
Model: Galaxy A23 5G SM-A236U-BIT4
Operation: Reset FRP
How to connect phone:
1. With phone off enter edl mode keep pressing vol+ and vol- buttons and insert usb cable
2. If this metod not work, use edl cable to force emergenty download mode.
3. If this metod not work, use testpoint to force emergenty download mode.
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM90) detected.
Hello received.
HW ID: 00002000E1901A00
PK HASH: 41FE30CBF2FFF35E8E725A35B3D321B2B6FD48168C3CE35D49 4E5BE8C3A0D1C1
using loader: prog_firehose_ddr_A236U.elf
Arhitecture:64 bits
[64]Sending loader, please wait..
Readed length: 16
Waiting for loader to start...
[0] Send NOP ok, loader start.
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 59.05 GB Partitions count: 36
Volume[1] Size: 8.11 MB Partitions count: 2
Volume[2] Size: 8.11 MB Partitions count: 2
Volume[3] Size: 4.11 MB Partitions count: 2
Volume[4] Size: 512.11 MB Partitions count: 38
Volume[5] Size: 8.11 MB Partitions count: 2
[00C197FB]Userdata Size: 48.4 GB
Partitions count: 82
Erasing Samsung FRP, wait.....
Erasing FRP, finished
*************************************
Log saved: C:\Users\MaxCell Tecnology\Documents\NckDongle\qualcomm_module\qc_m odule_Logs\reset_frp__00002000E1901A00_41FE30CBF2F FF35E8E725A35B3D321B2B6FD48168C3CE35D494E5BE8C3A0D 1C14.txt
Total Time: 00:00:19
Done.

 

[Ziggywong0305]

Exe version: NCKBox AndroidMTK 3.0.3
Selected model: 0-By CPU MT6761
Action: Unlock
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(25) : MediaTek USB VCOM (Android) (COM25)
[25] \\?\usb#vid_0e8d&pid_0003#5&387eb99&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[60]META Port Detected: MediaTek USB VCOM (Android) (COM60)
USB\VID_0E8D&PID_200E&MI_01\6&57BA8E8&0&0001
Start sync target, waiting responce.....
ChipID: MT6761
[MT6761]Using Algo 5
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6761
[META]SW_VER : MOLY.LR12A.R3.MP.V175.4
[META]HW_VER : TK_MD_BASIC_HW
[helio]Read simlock info.
IMEI Location: NVRAM
Phone imei[1] : 353536932427996
Start direct unlock[SIM1]
Simlock checksum is ok.
Direct unlock done
[0]All done.

 

[ZaksGsm]

Please how to flash the loader

 

[Hlabs]

Samsung A032F extract Odin Firmware and Unbricking Successful with NCK PRO BOX
No Pac Firmware needed, Clean unbrick, no second stage after flashing.


ACTION: Flash Firmware.
Selected firmware: firmware_info.xml
NV: Skip write nvram
Device Storage: EMMC
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM8)
BOOT: SPRD3
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
[00:00:11] Sending first loader.
[00:00:16] Sending second loader.
[00:00:26] Second loader sent ok.
New flash metod detected.
Phone have super partition.
[00:00:26] Making flash ic repartition.
[00:00:26] Format: l_runtimenv1
[00:00:26] [l_runtimenv1]Format OK.
[00:00:26] Format: l_runtimenv2
[00:00:26] [l_runtimenv2]Format OK.
[00:00:26] Format: misc
[00:00:26] [misc]Format OK.
[00:00:26] Format: uboot
[00:00:26] [uboot]Format OK.
[00:00:26] Format: uboot_log
[00:00:26] [uboot_log]Format OK.
[00:00:26] Format: metadata
[00:00:26] [metadata]Format OK.
[00:00:26] Format: cache
[00:00:26] [cache]Format OK.
[00:00:26] Format: sysdumpdb
[00:00:26] [sysdumpdb]Format OK.
[00:00:26] Start write: l_deltanv
[00:00:27] Start write: trustos
[00:00:29] Start write: sml
[00:00:29] Start write: pm_sys
[00:00:31] Start write: teecfg
[00:00:31] Start write: uboot
[00:00:53] Start write: vbmeta
[00:00:54] Start write: gpsgl
[00:00:55] Start write: gpsbd
[00:00:56] Start write: wcnmodem
[00:00:58] Start write: l_gdsp
[00:01:07] Start write: l_ldsp
[00:01:24] Start write: l_modem
[00:01:48] Start write: boot
[00:02:41] Start write: recovery
[00:03:34] Start write: dtbo
[00:03:41] Start write: socko
[00:03:48] Start write: vbmeta_system
[00:03:48] Start write: super
[00:44:49] Start write: prism
[00:45:28] Start write: optics
[00:45:30] Start write: cache
[00:45:30] Start write: omr
[00:45:31] Start write: userdata
[00:49:08] Start write: splloader
Low Level Format Userdata
[00:49:08] Format: misc
[00:49:08] [misc]Format OK.
[00:49:08] Format: metadata
[00:49:08] [metadata]Format OK.
[00:49:08] Format: userdata
[00:49:08] [userdata]Format OK.
[00:49:08] Format: cache
[00:49:08] [cache]Format OK.
Flashing done.
If phone stuck on logo long time perform wipe from recovery or safe reset from exe
[can take 0-10 sec]Wait untill phone restart.
Exe version: Unisoc Module 2.2.8

 

[GsmToto]

Hisense U50 successfully unlocked.

 

[GsmToto]

VORTEX HD65 choice unlock done

 

[Fast Unlocking]

VIVO Y12s (V2026)
FRP Bypass Reset Done

PRELOADER VIVO V2

[Reset FRP]
Waiting for device...Found
Port Info : MediaTek PreLoader USB VCOM (Android) (COM26) [\\?\usb#vid_0e8d&pid_2000#6&26bde6ad&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}]
: MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
: PRELOADER PORT
HW ID : MT6765 [0766] Helio P35/G35
HW VER : 8A00,CA00,0000
Sec. Cfg : [SBA Active] [SLA Inactive] [DAA Active]
MEID : 2A641D383F654F29652EBB410E698ABB
SoC ID[0] : 98E12E44708F7DA920BEECA7FB92AE4A
SoC ID[1] : C02426924ED818CF495A27C16B29C8D5
Sending DA1...Done
Running DA1...Done
Waiting DA SYNC Signal...OK
Setting Checksum Level...Done [Storage]
Connection : preloader
Speed : high-speed
Sending DA2...OK
Running Exploit (New)...Done
SRAM : 0x000000000003A000 [232.00 KB]
DRAM : 0x0000000100000000 [4.00 GB]
EMMC ID : hC9aP3
EMMC CID : 90014A684339615033011071EAA01839
BOOT[1] : 0x0000000000400000 [4.00 MB]
BOOT[2] : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
Reading Parititon Info...OK
And. Ver. : 11
Prod. Ver. : PD2036F_EX_A_6.16.15
Hw. Ver. : PD2036F_EXMA
Build Dt. : Mon Apr 8 15:42:11 CST 2024
Display ID : RP1A.200720.012 release-keys
Ver. Inc. : eng.compil.20240408.154559
Locale : en-US
Patch : 2023-05-01
Reset FRP Data...Done
Process finished
[NCK MTK Exploit Tool v1.1]

 

[GsmToto]

[I]SELECTED: BD4
ACTION: Erase FRP
Start Detect phone.
Phone must be off(you can service this phone without battery also).
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM50)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 1220808F [5e] 9176E6
UID: TGKV94_2_1_15
FileSystem: EMMC
Read partition info is supported by loader.
***************
[S]Manufacturer: TECNO MOBILE LIMITED
[S]Brand: TECNO
[S]Device: TECNO-BD4
[S]Model: TECNO BD4
Build ID: RP1A.201005.001
CPU arhitecture: armeabi-v7a
Build product name: BD4
Build description: BD4-user 11 RP1A.201005.001 213 release-keys
Transsion device name: TECNO POP 5 LTE
Build Id: RP1A.201005.001
Android Release: 11
Android Version: BD4-SE656BCEF-RGo-OP-220512V11
Security patch: 2022-04-05
CPU NAME: SC9863A
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Exe version: NCK Unisoc Online Tool 0.2
Log saved:
C:\NckTeam\unisoc_module\spreadtrum_module_backup_ folder\Saved_Logs\TECNO_BD4-SE656BCEF-RGo-OP-220512V11_erase_frp.txt
Total Time: 00:00:50
Done.[/S][/S][/S][/S][/I]

 

[GsmToto]

SELECTED: SC9863A
ACTION: Erase FRP
Start Detect phone.
Phone must be off(you can service this phone without battery also).
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM2)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 1209CC0A [5e] 9137A2
UID: TCNR91_7_24_10
FileSystem: EMMC
Read partition info is supported by loader.
***************
Manufacturer: HMD Global
Brand: Nokia
Device: IRS
Model: Nokia C01 Plus
Build ID: RP1A.201005.001
CPU arhitecture: armeabi-v7a
Build product name: IRS
Build description: T19545AA1_general-user 11 RP1A.201005.001 26636 release-keys
Build Id: RP1A.201005.001
Android Release: 11
Android Version: 00WW_1_230_SP02
Security patch: 2022-07-05
CPU NAME: SC9863M
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Exe version: NCK Unisoc Online Tool 0.2
Log saved:
C:\NckTeam\unisoc_module\spreadtrum_module_backup_ folder\Saved_Logs\Nokia_00WW_1_230_SP02_erase_frp. txt
Total Time: 00:00:43
Done.

 

[GsmToto]

SELECTED: SC9863A_64_V2
ACTION: Erase FRP
Start Detect phone.
Phone must be off(you can service this phone without battery also).
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM2)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 64E4396 [5e] 743809
UID: M3P939_25_7_22
FileSystem: EMMC
Read partition info is supported by loader.
CPU NAME: SC9643A
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Exe version: NCK Unisoc Online Tool 0.2
Log saved:
C:\NckTeam\unisoc_module\spreadtrum_module_backup_ folder\Saved_Logs\_erase_frp_4.txt
Total Time: 00:00:51
Done.

 

[GsmToto]

[Reset FRP]
Waiting for device...Found
Port Info : MediaTek USB Port_V1632 (COM3) [\\?\usb#vid_0e8d&pid_0003#5&212ac8fc&0&7#{86e0d1e0-8089-11d0-9ce4-08003e301f73}]
: MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
: BROM PORT
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Cfg : [SBA Active] [SLA Inactive] [DAA Active]
MEID : 1C3FD18FBCWS41CDE5B76F8F792F374G
SoC ID[0] : A945692EFCK83825D23D4721AB1789KV
SoC ID[1] : DA268JFC9A1AF247V92FFAC2E1B6B41M
Executing Exploit...Done
Reading Preloader...OK
Saved as : preloader_oppo6762_18540.bin
Loading EMI Config from Preloader...OK
Sec. Cfg : [SBA Inactive] [SLA Inactive] [DAA Inactive]
Sending DA1...OK
Running DA1...OK
Waiting DA SYNC Signal...OK
Setting Checksum Level...Done [Storage]
Connection : brom
Speed : HIGH-SPEED
Reading EMI Configuration...OK
EMMC CID : 150100F51583633H142J93CBFD0DB57AM
Sending EMI Config...OK
Sending 2nd DA...OK
Activating DA Extension...OK
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x0000000080000000 [2.00 GB]
Flash ID : QX63AB
CID : 150100515836334142093CBFD0DB57AF
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
Reading Parititon Info...OK
Manufacturer : OPPO
And. Ver. : 9
Locale : en-US
Patch : 2021-05-05
Reset FRP Data...Done
Process finished
[NCK MTK Exploit Tool v1.0]
LOG TXT : 20952411_283079.txt

 

[GsmToto]

SELECTED: Tiger T606 Ver2
ACTION: Erase FRP
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM3)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 7429C9 [5e] 73C3786
UID: M2W906_15_7_18
FileSystem: UFS
Read partition info is supported by loader.
CPU NAME: T606
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Exe version: Unisoc Module 2.3.1
Log saved:
C:\nckdongle\spreadtrum_module\spreadtrum_module_b ackup_folder\Saved_Logs\_erase_frp_13.txt
Total Time: 00:00:48
Done.

 

[GsmToto]

Exe version: NCKDongle AndroidMTK 2.8.3
Selected model: 0-By CPU MT6765
[auto]Action: Reset FRP
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
Keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(120) : MediaTek PreLoader USB VCOM (Android) (COM3)
[120] \\?\usb#vid_0e8d&pid_2000#6&1a38cdfb&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Switch preloader to bootrom...
crash succeed!
CPU: MT6765 CPU code: 766 Target config: e5
***********************
Secure boot enabled: true
Need serial link authorization: false
Need download agent authorization: true
SWJTAG enabled: true
EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: false
Root cert required: false
Memory read authorization: true
Memory write authorization: true
Cmd 0xC8 blocked: true
***********************
Executing exploit, do not disconnect phone
Exploit has been executed successfully.
[3b800]Dumping phone preloader.
Preloader: C:\ProgramData\Android_MTK_Backup_Folder\preloader _backup\preloader_bora2g.bin
Waiting for handle to become active......
Reseived active handle repply from phone......
Booting phone
Detected(124) : MediaTek USB Port (COM4)
[124] \\?\usb#vid_0e8d&pid_0003#6&1a38cdfb&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Brom
Phone detected...Please wait
BBCHIP: 6765 0 ca00
Using Algo 1.
Helio MT6765 phone detected, swithing to helio api
Helio enabled DRAM in First Da: FALSE
Sending loader.....
BBCHIP MT6765
[1]Storage EMMC
Block size: 512
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: D6010341334135 : 000000000000000000
EMMC UA SIZE: 0x73a000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x73b800000 [28.930 GB]
[EMMC]FORMAT
[0]FRP Reset Done.
[helio]Wait untill phone will start charging.
[0]All done.