Z3X Pandora PRO 8.4/8.5 Released. New Honor and Lenovo devices added

[Sheikh adi]

Searching USB Flash interface... COM374 detected
Setup connection... OK
Model: SM-A155F
SW version: A155FXXS5BXJ3
Sales code: PKD
Device ID: 309ac69fa0795a11
Vendor: SAMSUNG
Product: KM8F9001JA-B816
Unique Number: CE0424840C45D1E1197E
FW Version: 0004
Capacity: 256 Gb
Reading data from phone... OK
Sending data to phone... OK
Rebooting to download... OK
Searching USB Flash interface... COM374 detected
Setup connection... OK
Sending data to phone... OK
Sending data to phone... error timeout


Selected model: Samsung SM-A155F (Galaxy A15)
Operation: Erase FRP
Software version: 8.5
Work ID: 66455376

 

[Sheikh adi]

Searching USB Flash interface... COM374 detected
Setup connection... OK
Model: SM-A155F
SW version: A155FXXS5BXJ3
Sales code: PKD
Device ID: 309ac69fa0795a11
Vendor: SAMSUNG
Product: KM8F9001JA-B816
Unique Number: CE0424840C45D1E1197E
FW Version: 0004
Capacity: 256 Gb
Reading data from phone... OK
Sending data to phone... OK
Rebooting to download... OK
Searching USB Flash interface... COM374 detected
Setup connection... OK
Sending data to phone... OK
Sending data to phone... error timeout


Selected model: Samsung SM-A155F (Galaxy A15)
Operation: Erase FRP
Software version: 8.5
Work ID: 66455376

Load DownloadAgent... OK


Selected model: Samsung SM-A155F (Galaxy A15)
Operation: Erase FRP
Software version: 8.5
Work ID: 66455653

 

[Sheikh adi]

Selected model: Samsung SM-A155F (Galaxy A15)
Operation: Erase FRP
Software version: 8.5
Work ID: 66455653

Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM375 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 1208
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6789]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM375 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 1208
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6789]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x219D5E9C, 0xAC951D90, 0x3B2716BD, 0xC0F6DE0E
Get Chip ID... [MT1208]
Get SOC ID... [BF54AFA92053CD0D440543846F061C41A87BCF2B34DCA3674F5BAC1FFA1CD317]
Get sec config... OK [000000E5]
Send AUTH file... OK
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Setup device enviroment... OK
Setup device parametres... OK
Get device info... OK
UFS CID (FW VER): KM8F9001JA-B816 ()
Send 2nd DA... OK
DA2 auth: disabled
Get device info... OK
UFS INFO:
UFS_CID : KM8F9001JA-B816
UFS_FWVER :
BLOCK_SIZE: 0x0000001000 (4.00Kb)
UFS_LU0 : 0x0000400000 (4.00Mb)
UFS_LU1 : 0x0000400000 (4.00Mb)
UFS_LU2 : 0x3B96000000 (238.34Gb)
Read partitions info from phone... error(1)
Read partitions info from phone... error(1)

 

[nabeel4530]

pandora 8.5 update not usedless fuk update investment wast

 

[gladiador12]

hi any questions frp samsung a155m bit5 not support

 

[cellphone]

Pandora PRO 8.5 Released. New Samsung devices added


Added support Samsung Mediatek phones (Preloader mode) *(TEST)* :

SM-A155F, SM-A155M
SM-A156B, SM-A156E, SM-A156M, SM-A156U, SM-A156U1, SM-A156W
SM-A165M, SM-A165N, SM-A1666P, SM-A245M
SM-E066B, SM-E156B, SM-G556B
SM-M156B, SM-S156V
SM-X820, SM-X826B, SM-X920, SM-X926B


Fixes:

- Fixed "Could not parse response. (Error: JR0)"


Download link: 172.25 MB file on MEGA



DO NOT POST ANY LOGS OF JOB HERE in this thread, if you have any error - open own thread and supporters will answer there!!!

List of resellers with stock: HERE

Selected model: Samsung SM-A155F (Galaxy A15)
Operation: Erase FRP
Software version: 8.5

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM18 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 1208
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6789]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM18 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 1208
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6789]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xF5C23530, 0xC6077961, 0x5D969692, 0x0C987D64
Get Chip ID... [MT1208]
Get SOC ID... [6399289AF1F481DD46573CA7D79F5AA46E2C132821A324D4ACD826B189FD718F]
Get sec config... OK [000000E5]
Send AUTH file... OK
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Setup device enviroment... OK
Setup device parametres... OK
Get device info... OK
UFS CID (FW VER): KM5L9000CM-B424 ()
Send 2nd DA... OK
DA2 auth: disabled
Get device info... OK
UFS INFO:
UFS_CID : KM5L9000CM-B424
UFS_FWVER :
BLOCK_SIZE: 0x0000001000 (4.00Kb)
UFS_LU0 : 0x0000400000 (4.00Mb)
UFS_LU1 : 0x0000400000 (4.00Mb)
UFS_LU2 : 0x1DCB000000 (119.17Gb)
Read partitions info from phone... error(1)
Read partitions info from phone... error(1)


preloader mode not working , i was trying to do remove frp

 

[cellphone]

Selected model: Samsung SM-A155F (Galaxy A15)
Operation: Erase FRP
Software version: 8.5

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM18 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 1208
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6789]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM18 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 1208
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6789]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xF5C23530, 0xC6077961, 0x5D969692, 0x0C987D64
Get Chip ID... [MT1208]
Get SOC ID... [6399289AF1F481DD46573CA7D79F5AA46E2C132821A324D4ACD826B189FD718F]
Get sec config... OK [000000E5]
Send AUTH file... OK
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Setup device enviroment... OK
Setup device parametres... OK
Get device info... OK
UFS CID (FW VER): KM5L9000CM-B424 ()
Send 2nd DA... OK
DA2 auth: disabled
Get device info... OK
UFS INFO:
UFS_CID : KM5L9000CM-B424
UFS_FWVER :
BLOCK_SIZE: 0x0000001000 (4.00Kb)
UFS_LU0 : 0x0000400000 (4.00Mb)
UFS_LU1 : 0x0000400000 (4.00Mb)
UFS_LU2 : 0x1DCB000000 (119.17Gb)
Read partitions info from phone... error(1)
Read partitions info from phone... error(1)


samsung a155f , remove frp error

 

[gsmalamin@100]

OPPO A80 5G and A3 pro 5g new security and Imei repair update please

 

[shadow0rus]

Thank, please add enable ADB in meta mode

 

[shadow0rus]

please add EXYNOS phones

 

[maviejder]

Qualcomm device backup not being created.
patch1,2,3,4,5 and rawprogram1,2,3,4,5 are not created.

 

[dany_boy]

Please login to view image

Pandora PRO 8.5 Released. New Samsung devices added


Added support Samsung Mediatek phones (Preloader mode) *(TEST)* :

SM-A155F, SM-A155M
SM-A156B, SM-A156E, SM-A156M, SM-A156U, SM-A156U1, SM-A156W
SM-A165M, SM-A165N, SM-A1666P, SM-A245M
SM-E066B, SM-E156B, SM-G556B
SM-M156B, SM-S156V
SM-X820, SM-X826B, SM-X920, SM-X926B


Fixes:

- Fixed "Could not parse response. (Error: JR0)"


Download link: 172.25 MB file on MEGA



DO NOT POST ANY LOGS OF JOB HERE in this thread, if you have any error - open own thread and supporters will answer there!!!

List of resellers with stock: HERE

Please login to view image

Why honer mobile IMEI repair not possible this update on other tool we can do this but in pandora we can't why

 

[GsmToto]

Selected model: Samsung SM-A137F (Samsung Galaxy A13)
Operation: Erase FRP
Software version: 8.5

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,usbser,MediaTek USB Port,USBSER.sys,10.0.19041.906]
You are using driver version 10.0.19041.906, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,usbser,MediaTek USB Port,USBSER.sys,10.0.19041.906]
You are using driver version 10.0.19041.906, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM7 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x4E292A8B, 0xA7FB87CC, 0xF683BBC4, 0xD6890113
Get Chip ID... [MT6768]
Get SOC ID... [853C4972297124259CA42F642D7E281D01DCC6C04F44A08E0DCDF33C367A4B66]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [8]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x13014E4732433231391025968A0F8996
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: G2C219
EMMC_ID : 0x13014E4732433231391025968A0F8996
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 10% - 20% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [F2FS] ... OK
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-A137F
Product Name : a13vensxx
Product Device : a13ve
Product Board : a13ve
Board Platform : mt6768
Build ID : SP1A.210812.016
Build Date : Wed Jul 31 17:52:48 +07 2024
Firmware Version : A137FXXU6EXG3
Userdata FS Type : F2FS
Read partition "frp"... OK
Read partition "persistent"... OK
Format FRP... [P1] [P2] OK
Writting FRP data... OK
Erase FRP done!

 

[GsmToto]

Selected model: OPPO CPH1923 (OPPO A1K)
Operation: Erase FRP And Wipe
Software version: 8.5
Erasing of partitions can damage your device.


Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM5 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM5 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x7B71EEE5, 0x833A8FF1, 0xC533EB72, 0xAD4B6A46
Get Chip ID... [MT6765]
Get SOC ID... [7BA8A208E8FEC0E25982E0087C8A4969E491C793DF04BC192B D25DCED3E12AE9]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100514436334D42033DC3062E96D1
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: QD63MB
EMMC_ID : 0x150100514436334D42033DC3062E96D1
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: Exceeded its maximum estimated device life time
DeviceLifeTimeEstB: Exceeded its maximum estimated device life time
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : OPPO
Product Manufacturer : OPPO
Product Model : CPH1923
Product Name : CPH1923
Product Device : OP486C
Product Board : oppo6762_18540
Board Platform : mt6765
Build ID : PPR1.180610.011
Build Date : Fri Mar 29 16:47:13 CST 2024
Display ID : CPH1923EX_11_A.42
Security Patch : 2021-05-05
Version SDK : 28
Version Release : 9
Version Codename : REL
Firmware Version : 1711702281
Userdata FS Type : EXT4
Read partition "frp"... OK
Format FRP... [P1] OK
Writting FRP data... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Wipe data done!

 

[GsmToto]

Samsung SM-A015F U4 (Galaxy A01) U4
Operation: Erase FRP
Software version: 8.5

Waiting for device... OK
Device found at COM17
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 533378433
Sahara ver: 2
OEM PK HASH: 3CC959AC5B3364A42EC3CB40C091C90F2A8101F1C1207C5C9E D1D2348AA10082
CPU: SDM439 (Snapdragon 439)
Vendor: Samsung
MSM HW ID: 000BF0E100200000
SBL SW Ver: 00000000
Prepare loader file... downloading... OK
Loader hash: 723BCE229E024D055191D8BF97C8A3EF7415BD1C
Loader PK hash: 3CC959AC5B3364A42EC3CB40C091C90F2A8101F1C1207C5C9E D1D2348AA10082
Loader version: 3.21
Sending loader... OK
FireHose initialization... OK
Detecting memory type... OK [EMMC]
Get storage info... OK
Storage info:
Type: EMMC
Name: QE63MB
Page size: 200
Block size: 200
Partition count: 3
PART0 size: 0x03AB400000 (14,68Gb)
PART1 size: 0x0000400000 (4,00Mb)
PART2 size: 0x0000400000 (4,00Mb)
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Serial Number : R9YN90C1DKJ
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-A015F
Product Name : a01qxx
Product Device : a01q
Product Board : QC_Reference_Phone
Board Platform : msm8937
Build ID : QP1A.190711.020
Build Date : Tue Feb 23 20:15:32 KST 2021
Display ID : QP1A.190711.020.A015FXXU4AUB2
Security Patch : 2021-02-01
Version SDK : 29
Version Release : 10
Version Codename : REL
Firmware Version : A015FXXU4AUB2
Userdata FS Type : F2FS
Erase FRP... OK
Done!