Z3X Pandora PRO 8.4/8.5 Released. New Honor and Lenovo devices added

[GsmToto]

Selected model: Mediatek Mediatek
Operation: Erase FRP And Wipe
Software version: 8.2

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM10 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3[BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x17E647B9, 0x42C96024, 0x6925A8D5, 0xC50C1B4D
Get Chip ID... [MT6761]
Get SOC ID... [8F5F0B468BB5A39CAE900A55BB3C725A0CD30B92125B18359E FA684579024CC0]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100514436334D42014ABF68243787
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: QD63MB
EMMC_ID : 0x150100514436334D42014ABF68243787
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 40% - 50% device life time used
DeviceLifeTimeEstB: 40% - 50% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : Infinix
Product Manufacturer : INFINIX MOBILITY LIMITED
Product Model : Infinix X653C
Product Name : H6114
Product Device : Infinix-X653C
Product Board : Infinix-X653C
Board Platform : mt6761
Build ID : PPR1.180610.011
Build Date : Mon Jul 5 18:57:56 CST 2021
Display ID : X653C-H6114GH-PGo-210705V269
Security Patch : 2021-07-05
Version SDK : 28
Version Release : 9
Version Codename : REL
Firmware Version : GH-210705V269
Userdata FS Type : F2FS
Read partition "frp"... OK
Format FRP... [P1] OK
Writting FRP data... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Creating default filesystems... [USERDATA: F2FS] ...
Exception: Access violation at address 012F7823 in module PandoraTool.exe (offset EF7823). Read of address 61746160

 

[nabeel4530]

Please login to view image

Pandora 8.2 Release
Added support Honor phones in Preloader mode
LLY-AN00 Honor X50i Plus LLY-NX1, LLY-NX3 Honor 200 Lite
CLK-NX1, CLK-NX3 Honor 90 Smart
CRT-NX1, CRT-NX1 Honor 90 Lite
CRT-AN00 Honor X50i
DIO-AN00 Honor X40i
RKY-AN00 Honor Play 40 Plus
RKY-AN10 Honor Play 7T
CLK-AN00 Honor Play 50 Plus
Added support Samsung Mediatek phones
SM-A245F Galaxy A24 (BROM mode)
SM-X110 Galaxy Tab A9 (Preloader mode)
SM-X115 Galaxy Tab A9 (Preloader mode)
SM-A166P Galaxy A16 5G (Preloader mode)
Added support QCOM phones (EDL mode)
Lenovo Tab M10 Plus Gen 3 TB128FU, TB128XC, TB128XU
Motorola Moto G62 5GXT2223-1, XT2223-2
Added new loaders and new Samsung models (EDL mode):
SM-A057F (BIT
SM-A235M (BIT A)
SM-A526B (BIT
SM-E236B (BIT 9)
SM-F711B (BIT
SM-F711U (BIT A)
SM-F731B (BIT 4)
SM-F741B (BIT 2)
SM-F746B (BIT 4)
SM-F956N (BIT 2)
SM-G736B (BIT
SM-G7810 (BIT E)
SM-G781U (BIT K)
SM-G9650 (BIT 6)
SM-G981U (BIT C)
SM-G988N (BIT 7)
SM-G9880 (BIT C)
SM-G990U (BIT E)
SM-N9700 (BIT 6)
SM-N981N (BIT 7)
SM-N986N (BIT 7)
SM-S901N (BIT 6)
SM-S906N (BIT 6)
SM-S908E (BIT C)
SM-S911N (BIT 5)
SM-S918B (BIT
SM-S918N (BIT 5)
SM-S928N (BIT 4)
SM-T736B (BIT 7)
SM-T738U (BIT A)
SM-T865 (BIT 6)
SM-X210 (BIT 6)
SM-X216B (BIT 6)
SM-X710 (BIT 5)
SM-X818U (BIT 5)
Added support for a lot of Mediatek phones
168.01 MB file on MEGA...
Z3X Team News

fuk update

 

[younistamana]

pandora tool is dead mtk chip no updata new no mata mode

 

[younistamana]

why my post delete tell me you not answering is ok i tell truly you not updata mtk future

 

[abd8677762]

Please login to view image

Pandora 8.2 Release
Added support Honor phones in Preloader mode
LLY-AN00 Honor X50i Plus LLY-NX1, LLY-NX3 Honor 200 Lite
CLK-NX1, CLK-NX3 Honor 90 Smart
CRT-NX1, CRT-NX1 Honor 90 Lite
CRT-AN00 Honor X50i
DIO-AN00 Honor X40i
RKY-AN00 Honor Play 40 Plus
RKY-AN10 Honor Play 7T
CLK-AN00 Honor Play 50 Plus
Added support Samsung Mediatek phones
SM-A245F Galaxy A24 (BROM mode)
SM-X110 Galaxy Tab A9 (Preloader mode)
SM-X115 Galaxy Tab A9 (Preloader mode)
SM-A166P Galaxy A16 5G (Preloader mode)
Added support QCOM phones (EDL mode)
Lenovo Tab M10 Plus Gen 3 TB128FU, TB128XC, TB128XU
Motorola Moto G62 5GXT2223-1, XT2223-2
Added new loaders and new Samsung models (EDL mode):
SM-A057F (BIT
SM-A235M (BIT A)
SM-A526B (BIT
SM-E236B (BIT 9)
SM-F711B (BIT
SM-F711U (BIT A)
SM-F731B (BIT 4)
SM-F741B (BIT 2)
SM-F746B (BIT 4)
SM-F956N (BIT 2)
SM-G736B (BIT
SM-G7810 (BIT E)
SM-G781U (BIT K)
SM-G9650 (BIT 6)
SM-G981U (BIT C)
SM-G988N (BIT 7)
SM-G9880 (BIT C)
SM-G990U (BIT E)
SM-N9700 (BIT 6)
SM-N981N (BIT 7)
SM-N986N (BIT 7)
SM-S901N (BIT 6)
SM-S906N (BIT 6)
SM-S908E (BIT C)
SM-S911N (BIT 5)
SM-S918B (BIT
SM-S918N (BIT 5)
SM-S928N (BIT 4)
SM-T736B (BIT 7)
SM-T738U (BIT A)
SM-T865 (BIT 6)
SM-X210 (BIT 6)
SM-X216B (BIT 6)
SM-X710 (BIT 5)
SM-X818U (BIT 5)
Added support for a lot of Mediatek phones
168.01 MB file on MEGA...
Z3X Team News

whats the decryption key team ??

 

[GsmToto]

Selected model: TCL T608DL (TCL 40 T)
Operation: Unlock network
Software version: 8.2

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM2 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000007]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xDEABE6C9, 0x6BA64DA9, 0xA7A52450, 0xEDBE9429
Get hw mode... OK
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [7]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: A3A551
EMMC_ID : 0xD60103413341353531122A894DD0197M
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x073A000000 (28.91Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: info not available
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM disabled !!!
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TCL
Product Manufacturer : alps
Product Model : T608DL
Product Name : T608DL
Product Device : Sonata_TF
Product Board : sonatatf
Board Platform : mt6765
Build ID : SP1A.210812.016
Build Date : Thu Nov 30 21:57:24 CST 2023
Display ID : TP1A.220624.014
Security Patch : 2023-12-01
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 4DF4
Userdata FS Type : F2FS
Read security partition from phone... OK
Read security partition from phone...
Decrypting security data... OK
Encrypt security data... OK
Read security files... OK
Read NVDATA files... OK
Calculating... OK
Read lock info... OK
Read OTP... OK
Patch data... OK
Unlock... OK [DF1_T2, DF2, GB1_03, GB2, PTCH]
Write lock info... OK
Selected "Auto unlock bootloader"
Read security partition from phone... OK
Write security partition to phone... OK
Unlock bootloader done!
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Formatting "md_udc" partition... OK
Write security partition to phone... OK
Network Unlock done!

 

[GsmToto]

unlock done but still locked
Selected model: Samsung SM-A037U (Samsung Galaxy A03s)
Operation: Unlock network (Server)
Software version: 8.2


Checking Login and Password... OK
Balance: 17 crd.
You have 17 credit(s) left. This operation takes 5 credits. Continue? Yes
Searching Samsung modem... detected COM86
Reading phone info... OK
Model: SM-A037U
AP version: A037USQU6DWJ3
CSC version: A037UOYN6DWJ3
CP version: A037USQU6DWJ3
OS version: 13
Product code: XAA
Carrier ID: XAA
Phone SN: RFCR717F96L
Unique number: W154758300363CCEBC6M
IMEI: 352215330702026
IMEI Certi: PASS
Powering off... OK
Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM2 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM2 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x62EFE0C0, 0x6516C026, 0xB4018A70, 0x17188CB1
Get Chip ID... [MT6765]
Get SOC ID... [A6D9CD4019FD8D5F2432D195A8D3B8AE6B862401D7F303B389 AB5F3429BFA6E6]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x15010047583642414200363CCEBC6A3M
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: GX6BAB
EMMC_ID : 0x15010047583642414200363CCEBC6A3M
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x00C0000000 (3.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-A037U
Product Name : a03susq
Product Device : a03su
Product Board : a03su
Board Platform : mt6765
Build ID : SP1A.210812.016
Build Date : Tue Oct 10 14:58:09 KST 2023
Display ID : TP1A.220624.014.A037USQU6DWJ3
Security Patch : 2023-09-01
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : A037USQU6DWJ3
Userdata FS Type : F2FS
Read security partition from phone... OK
Read security files... OK
Calculating... OK
Read lock info... OK
Searching server... OK
Waiting for server answer... OK
Unlocking ... [1] ... OK
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!

 

[aliipi]

ITEL A666L UNISOC T606-64 V2 NOT AVAILABLE IN SUPPORT PANDORA BOX

 

[GsmToto]

Selected model: Samsung SM-G781U (Galaxy S20 FE 5G)
Operation: Erase FRP
Software version: 8.2

Waiting for device... OK
Device found at COM3
Port: Quectel QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 2372460937
Sahara ver: 2
OEM PK HASH: 59CD3ADFEEAF8F8713D084F35B7B673BD7C39BD2BBA0B1E85M
D84571907F9277821154FB2E15169A9241A8829ACFBEAAS
CPU: SM8250 (Snapdragon 865 5G)
Vendor: Samsung
MSM HW ID: 000C30E100200000
SBL SW Ver: 00000000
Prepare loader file... OK
Loader hash: 4F1331548929B7750A00510FF5FEDE5D9C3991B5
Loader PK hash: 59CD3ADFEEAF8F8713D084F35B7B673BD7C39BD2BBA0B1E85M
D84571907F9277821154FB2E15169A9241A8829ACFBEAS
Loader version: 6.5
Sending loader... OK
FireHose initialization... OK
Detecting memory type... OK [UFS]
Get storage info... OK
Storage info:
Type: UFS
Name: KLUDG4UHDB-B2D1
Page size: 1000
Block size: 1000
Partition count: 4
LU0 size: 0x1DC5C00000 (119.09Gb)
LU1 size: 0x0000800000 (8.00Mb)
LU2 size: 0x0000800000 (8.00Mb)
LU3 size: 0x0003C00000 (60.00Mb)
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Serial Number : RFCNB07KYYM
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-G781U
Product Name : r8qsqx
Product Device : r8q
Product Board : kona
Board Platform : kona
Build ID : RP1A.200720.012
Build Date : Fri Dec 20 14:07:28 KST 2024
Display ID : TP1A.220624.014.G781USQSKHXL4
Security Patch : 2025-01-01
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : G781USQSKHXL2
Userdata FS Type : F2FS
Erase FRP... OK
Done!

 

[Drogba911]

g14 xt2341-3 please add new patch cert 2025 update

 

[saber23]

Hello I changer pc . I want to open pandora in another pc . Pandora tell me always that password is incorrect. I CHANGED PASSWORD BUT ALWAYS THE SAME ERROR CAN YOU FIX THIS PLEASE

 

[GsmToto]

Operation: Erase FRP
Software version: 8.2

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0699
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6739]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0699
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6739]
Install LibUSB... OK
Waiting for device... OK
Open port... OK
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM26 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0699
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6739]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x1096876A, 0x9787AC0C, 0xB5D8D7DD, 0x16415AE3
Get Chip ID... [MT6739]
Get SOC ID... [B7E0034194E445C35ED111A1F0D5CD6FDC474348CEA3764732 5F995BD14029A4]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [1]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100514536334D4203B07AC6E045B7
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: QE63MB
EMMC_ID : 0x150100514536334D4203B07AC6E045B3
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x03A3E00000 (14.56Gb)
RAM INFO:
INT_SRAM: 0x0000020000 (128.00Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 50% - 60% device life time used
DeviceLifeTimeEstB: 50% - 60% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TCL
Product Manufacturer : TCL
Product Model : 5058A
Product Name : 5058A
Product Device : A3A_PLUS
Board Platform : mt6739
Build ID : N6F26Q
Build Date : 2019年 01月 14日 星期一 12:33:13 CST
Display ID : 5058A_AVDO1_V2.1_190114
Security Patch : 2019-01-05
Version SDK : 25
Version Release : 7.1.1
Version Codename : REL
Firmware Version : 5058A_AVDO1_V2.1
Read partition "frp"... OK
Format FRP... [P1] OK
Writting FRP data... OK
Erase FRP done!

 

[GsmToto]

Selected model: Samsung SM-A207M (Galaxy A20s)
Operation: Erase FRP And Wipe
Software version: 8.2
BIT 4 or less is supported by EDL loader


Waiting for device... OK
Device found at COM6
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 2092700483
Sahara ver: 2
OEM PK HASH: 1187BA61EF9DD1150ADA91B89AFD7702CA0E2EDAB6220C8CDD 9AE66116FA32B8
CPU: SDM450 (Snapdragon 450)
Vendor: Samsung
MSM HW ID: 0009A0E100200000
SBL SW Ver: 00000000
Prepare loader file... downloading... OK
Loader hash: 75EFA55B38356090EB32BE256858408AEF9E4ADE
Loader PK hash: 1187BA61EF9DD1150ADA91B89AFD7702CA0E2EDAB6220C8CDD 9AE66116FA32B8
Loader version: 3.21
Sending loader... OK
FireHose initialization... OK
Detecting memory type... OK [EMMC]
Get storage info... OK
Storage info:
Type: EMMC
Name: GD6BMB
Page size: 200
Block size: 200
Partition count: 3
PART0 size: 0x0747C00000 (29,12Gb)
PART1 size: 0x0000400000 (4,00Mb)
PART2 size: 0x0000400000 (4,00Mb)
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Serial Number : R9TMA0A4Z3J
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-A207M
Product Name : a20sub
Product Device : a20s
Product Board : msm8953
Board Platform : msm8953
Build ID : RP1A.200720.012
Build Date : Fri Jun 2 04:28:12 KST 2023
Display ID : RP1A.200720.012.A207MUBS4CWF1
Security Patch : 2023-05-01
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : A207MUBS4CWF1
Userdata FS Type : EXT4
Erase FRP... OK
Format partition "userdata"... OK
Creating default filesystem [EXT4]... OK
Format partition "cache"... OK
Creating default filesystem [EXT4]... OK
Done!

 

[saaya]

Please login to view image

Pandora 8.3. Release

Please login to view image

Please login to view image

GUI: Added fovorite models

Please login to view image

Added support OPPO phones Mediatek mode
Oppo A3 5G CPH2693, Oppo A3 Pro 5G CPH2665

Please login to view image

Added support Samsung Mediatek phones
SM-A165F Galaxy A16

Please login to view image

Added support Motorola Mediatek phones
XT2343-5 Moto G54 5G (Preloader mode)

Please login to view image

Added support Lenovo Mediatek phones
TB301FU, TB301XU Lenovo Tab M8 Gen 4
TB330FU, TB330FUP, TB330XC, TB330XU, TB330XUP Lenovo Tab M11
TB125FU Lenovo Tab M10 Plus Gen 3
TB311FU, TB311XC, TB311XU Lenovo Tab
TB570FU, TB570ZU Lenovo Tab Extreme

Please login to view image

Added support QCOM phones (EDL mode)
Asus Zenfone 6 ZS630KL, I01WD
Lenovo Tab K11 Plus TB352FU, TB352XU
Lenovo Legion Y90 L71061, Lenovo Legion Y70 L71091
Lenovo Legion Y700 2023 TB320FC
TB520FU Lenovo Yoga Tab Plus

Please login to view image

Added new loaders and new Samsung models (EDL mode):
SM-A236V (BIT 7)
SM-A4260 (BIT 6)
SM-A525F (BIT A)
SM-A525M (BIT A)
SM-F707B (BIT F)
SM-F707U (BIT 9)
SM-F7110 (BIT A)
SM-F731N (BIT 5)
SM-F731U (BIT 6)
SM-F946U (BIT 6)
SM-G970U (BIT 9)
SM-G9730 (BIT

Please login to view image

SM-G9750 (BIT 9)
SM-G9810 (BIT C)
SM-G981N (BIT 7)
SM-M145F (BIT 7)
SM-S911B (BIT

Please login to view image

SM-S911U (BIT 6)
SM-S916B (BIT 6)
SM-S916N (BIT 6)
SM-S916U (BIT 6)
SM-S9180 (BIT 5)
SM-S918U (BIT 6)
SM-T636B (BIT

Please login to view image

SM-X910 (BIT 5)

https://mega.nz/file/WV9l1IyQ...
https://t.me/z3x_news

OPPO CPH2251 (OPPO Reno 6 5G) imei Repair faild Fake Update

Selected model: OPPO CPH2251 (OPPO Reno 6 5G)
Operation: Repair
Software version: 8.3

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM56 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0959
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6877]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM56 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0959
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6877]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x99179C47, 0xFB5E11ED, 0xC4974345, 0xE361BF42
Get Chip ID... [MT6877]
Get SOC ID... [B8CF4400A4E9862ADCB685495CE3FC14ACFE74EEE26660E1DC0CE27FFC4452AC]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [17]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
UFS CID (FW VER): H9HQ15AFAMBDAR (A043)
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : H9HQ15AFAMBDAR
UFS_FWVER : A043
BLOCK_SIZE: 0x0000001000 (4.00Kb)
UFS_LU0 : 0x0000400000 (4.00Mb)
UFS_LU1 : 0x0000400000 (4.00Mb)
UFS_LU2 : 0x1DCB000000 (119.17Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0200000000 (8.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 10% - 20% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : alps
Product Manufacturer : alps
Product Model : CPH2251
Product Name : vnd_oplus6877
Product Device : oplus6877
Product Board : oplus6877
Board Platform : mt6877
Build ID : RP1A.200720.011
Build Date : Wed Jan 5 15:36:00 CST 2022
Display ID : CPH2251_11_A.19
Security Patch : 2021-12-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 1641367592307
Userdata FS Type : F2FS
Read security partition from phone...
Decrypting security data... error
Wrong key, unable to unlock bootloader!

 

[bwalya2011]

PLESASE ADD ANTI CRACK SPD AND MTK

Kindly pls, pls Add ANTI CRACK SPD AND MTK for it is important Tecno, Infinix , itel etc

 

[mohamedalnther]

add reno 12f 5g my bro

 

[kane66]

REMOVE IT ADMIN AUTO RESET IN 2 HOURS tecno et infinix please

 

[Shohag_bd]

bhot sary modls addd ha but kam ni hota fake tu ha

Yes Bro

 

[aliipi]

Selected model: Infinix X6532 (Infinix Hot 50 4G)
Operation: Erase FRP And Wipe
Software version: 8.3
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES
Work ID: 66086980

Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM65 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x42016DE0, 0x0ED3E5DA, 0x474D7F49, 0x5B9B8B55
Load DownloadAgent... OK
Search DA... OK [2]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... error(STATUS_SEC_INVALID_DA_VER)

 

[iftikharrana]

just copy past all update copy past

lg box dead samsung z3x dead
and next pandora number