Z3X Pandora PRO 7.4 / 7.5 Released. New devices functions added

[GsmToto]

Selected model: Wiko W-K211 (Wiko Y51)
Operation: Erase FRP
Software version: 7.5


Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM2
Port: USB\VID_1782&PID_4D00\6&320FE860&0&8
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: SC7731E
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: AAV92130006666
Read partitions info... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : WIKO
Product Manufacturer : WIKO
Product Model : W-K211-OPE
Product Name : W-K211-OPE
Product Device : W-K211
Product Board : k211
Board Platform : sp7731e
Build ID : QP1A.190711.020
Build Date : Fri Jul 16 10:07:47 CST 2021
Display ID : QP1A.190711.020 release-keys
Security Patch : 2021-07-05
Version SDK : 29
Version Release : 10
Version Codename : REL
Firmware Version : 1626400333
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Done!

 

[GsmToto]

Selected model: Itel L6006 (Itel A48)
Operation: Erase FRP
Software version: 7.5


Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM3
Port: USB\VID_1782&PID_4D00\6&298C69D9&0&4
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: skip(6)
Connecting to device... OK
Selected processor: SC9832E
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 0586D64H3G0024366
Read partitions info... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : Itel
Product Manufacturer : ITEL MOBILE LIMITED
Product Model : itel L6006
Product Name : SU385
Product Device : itel-L6006
Product Board : sp9832e_1h10_32b
Board Platform : sp9832e
Build ID : QP1A.190711.020
Build Date : Sat Feb 12 13:26:07 CST 2022
Display ID : L6006-SU385-10-IN-V042-20220212
Security Patch : 2022-02-05
Version SDK : 29
Version Release : 10
Version Codename : REL
Firmware Version : IN-V042-20220212
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Done!

 

[GsmToto]

Selected model: Xiaomi Redmi A2+ (Water)
Operation: Repair
Software version: 7.5


Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM5 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM5 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x1644ABCA, 0x70AFF4C2, 0x1F01E8CA, 0xEC6FC5AE
Get Chip ID... [MT6765]
Get SOC ID... [8D5C3DE2A31035950CEF3587EEAECA3E92DFDC65AF2B710E3C B4E23692B4A4M]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x9B0100596F8N3320074AD2899A94M
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: Y2P032
EMMC_ID : 0x9B01005932504GX320074AD2899A94M
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : Redmi
Product Manufacturer : Xiaomi
Product Model : water
Product Name : water_global
Product Device : water
Product Board : water
Board Platform : mt6765
Build ID : SP1A.210812.016
Build Date : Wed May 22 16:25:04 CST 2024
Display ID : 13 V14.0.27.0.TGOMIXM
Security Patch : 2024-05-01
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : V14.0.27.0.TGOMIXM
Userdata FS Type : F2FS
Read security partition from phone...
Decrypting security data... OK
Encrypt security data... OK
Read partition "nvdata"... OK
Read partition "protect1"... OK
Read partition "nvram"... OK
Read NVDATA files... OK
Read NVRAM files... OK
Read security files... OK
Calculating... OK
Read IMEI... OK
IMEI 1: 861794574123356
IMEI 2: 861791465748900
Repairing IMEI...
IMEI 1: 350547965835351
IMEI 2: 354215774321133
Write IMEI and patch CERT [NVDATA]... OK
Load partiton for patching... OK
Patching... OK
Selected "Auto unlock bootloader"
Read security partition from phone... OK
Write security partition to phone... OK
Unlock bootloader done!
Selected "Disable VBMETA verification"
Read security partition from phone... OK
Write security partition to phone... OK
Write IMEI and patch CERT [NVRAM]... OK
Write partition "nvdata"... OK
Write partition "nvram"... OK
Repair Security and Patch cert done!
If your phone after repair keeps rebooting - use wipe data option.

 

[aliipi]

after reset your device is corrupt.


Selected model: Realme RMX3760 (Realme C53)
Operation: Wipe Data
Software version: 7.5
There is a risk of data loss.
This procedure will erase all User Data
Make sure that you have a backup created. Continue? YES

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to NONE... OK
Connect phone to [PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM4
Port: USB\VID_1782&PID_4D00\5&10DC9A0C&0&1
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T616_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 0H73C15I221022F2
Flash Type: EMMC
Read partitions info... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : realme
Product Manufacturer : realme
Product Model : ums9230_hulk_Natv
Product Name : RMX3760
Product Device : RE58C2
Product Board : ums9230_hulk
Board Platform : ums9230
Build ID : TP1A.220624.014
Build Date : Sat Jun 29 20:25:28 CST 2024
Display ID : RMX3760export_14_C.19
Security Patch : 2024-05-05
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : 149
Userdata FS Type : F2FS
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Creating default filesystems... [CACHE: EXT4] ... [USERDATA: F2FS] ... OK
Done!

 

[GsmToto]

Selected model: Xiaomi Redmi A2+ (Water)
Operation: Repair
Software version: 7.5


Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM5 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM5 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x1644ABCA, 0x70AFF4C2, 0x1F01E8CA, 0xEC6FC5AE
Get Chip ID... [MT6765]
Get SOC ID... [8D5C3DE2A31035950CEF3587EEAECA3E92DFDC65AF2B710E3C B4E23692B4A4M]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x9B0100596F8N3320074AD2899A94M
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: Y2P032
EMMC_ID : 0x9B01005932504GX320074AD2899A94M
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : Redmi
Product Manufacturer : Xiaomi
Product Model : water
Product Name : water_global
Product Device : water
Product Board : water
Board Platform : mt6765
Build ID : SP1A.210812.016
Build Date : Wed May 22 16:25:04 CST 2024
Display ID : 13 V14.0.27.0.TGOMIXM
Security Patch : 2024-05-01
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : V14.0.27.0.TGOMIXM
Userdata FS Type : F2FS
Read security partition from phone...
Decrypting security data... OK
Encrypt security data... OK
Read partition "nvdata"... OK
Read partition "protect1"... OK
Read partition "nvram"... OK
Read NVDATA files... OK
Read NVRAM files... OK
Read security files... OK
Calculating... OK
Read IMEI... OK
IMEI 1: 861794574123356
IMEI 2: 861791465748900
Repairing IMEI...
IMEI 1: 350547965835351
IMEI 2: 354215774321133
Write IMEI and patch CERT [NVDATA]... OK
Load partiton for patching... OK
Patching... OK
Selected "Auto unlock bootloader"
Read security partition from phone... OK
Write security partition to phone... OK
Unlock bootloader done!
Selected "Disable VBMETA verification"
Read security partition from phone... OK
Write security partition to phone... OK
Write IMEI and patch CERT [NVRAM]... OK
Write partition "nvdata"... OK
Write partition "nvram"... OK
Repair Security and Patch cert done!
If your phone after repair keeps rebooting - use wipe data option.

 

[GsmToto]

elected model: Qualcomm Qualcomm
Operation: Erase FRP
Software version: 7.5


Waiting for device... OK
Device found at COM3
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 2989912949
Sahara ver: 2
OEM PK HASH: 2CF7619A278D26073F7EEA79BB7F4B7949C221487FEA058EA0 72CFFE38CE14BM
CPU: MSM8996Pro
Vendor: LG
MSM HW ID: 0005F0E100310000
SBL SW Ver: 00000000
Prepare custom loader file... OK
Loader hash: 2DE7D29FA7B5932JLH03CACC5850FF3916A52DGUJ
Loader PK hash: 2CF7619A278D26073F7EEA79BB7F4B7949C221487FEA058EA0 72CFFE38CESTJ
Loader version: 3.5
Sending loader... OK
FireHose initialization... OK
Detecting memory type... OK [UFS]
Get storage info... OK
Storage info:
Type: UFS
Name: H28U62301DTNU
Page size: 1000
Block size: 1000
Partition count: 7
LU0 size: 0x075EC00000
LU1 size: 0x0002000000
LU2 size: 0x0000800000
LU3 size: 0x0000800000
LU4 size: 0x000E800000
LU5 size: 0x0000800000
LU6 size: 0x0000800000
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... OK
Product Brand : lge
Product Manufacturer : LGE
Product Model : LG-H873
Product Name : lucye_global_ca
Product Device : lucye
Product Board : msm8996
Board Platform : msm8996
Build ID : OPR1.170623.032
Build Date : Mon Nov 12 20:26:37 KST 2018
Display ID : OPR1.170623.032
Security Patch : 2018-11-01
Version SDK : 26
Version Release : 8.0.0
Version Codename : REL
Firmware Version : 183267992611c1
Erase FRP... OK
Done!

 

[GsmToto]

Selected model: Vivo PD1732 (Vivo Y81 / Y81i)
Operation: Erase FRP And Wipe
Software version: 7.5
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES

Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM4 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x33D2AFD4M, 0x19AA9G5Z, 0xFE7076G2, 0x09FEF56X
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [5]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: HAG4a2
EMMC_ID : 0x90014A48473SZ46132A5C3F3C80E79KM
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x03AB400000 (14.68Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : vivo
Product Manufacturer : vivo
Product Model : vivo 1812
Product Name : PD1732CF_EX
Product Device : PD1732CF_EX
Board Platform : MTK6761
Build ID : O11019
Build Date : Thu Dec 29 20:01:46 CST 2022
Display ID : O11019 release-keys
Security Patch : 2021-04-01
Version SDK : 27
Version Release : 8.1.0
Version Codename : REL
Firmware Version : 1672319444
Userdata FS Type : EXT4
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Vivo_PD1732%20(Vivo%20Y81%20&%20Y81i)/FRP_BACKUP_(2024-10-4_8-11-54)/
Format FRP... [P1] OK
Writting FRP data... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Wipe data done!

 

[GsmToto]

Selected model: Xiaomi Redmi A1+ (Ice)
Operation: Repair
Software version: 7.5


Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1633,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1633,usb2ser.sys,3.0.1504.0]
Device found at COM3[BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x21DD3150, 0x0B2C9118, 0xE6FBB46B, 0xD4D839B9
Get Chip ID... [MT6761]
Get SOC ID... [273238A24795E530AA57C6B193CDDVGD49EC54620675001AB9 E238ADE4FF56M]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x450100DH56343033DB
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DV4032
EMMC_ID : 0x45010044563430RF320139C43B25DM
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : Redmi
Product Manufacturer : Xiaomi
Product Model : ice
Product Name : ice_global
Product Device : ice
Product Board : ice
Board Platform : mt6761
Build ID : SP1A.210812.016
Build Date : Wed Nov 30 00:02:46 CST 2022
Display ID : 12 V13.0.14.0.SGMMISX
Security Patch : 2022-11-01
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : V13.0.14.0.SGMMIYX
Userdata FS Type : F2FS
Read security partition from phone...
Decrypting security data... OK
Encrypt security data... OK
Read partition "nvdata"... OK
Read partition "protect1"... OK
Read partition "nvram"... OK
Read NVDATA files... OK
Read NVRAM files... OK
Read security files... OK
Calculating... OK
Read IMEI... OK
IMEI 1: 8630
IMEI 2: 863
Repairing IMEI...
IMEI 1: 86810
IMEI 2: 868
Write IMEI and patch CERT [NVDATA]... OK
Load partiton for patching... OK
Patching... OK
Selected "Auto unlock bootloader"
Read security partition from phone... OK
Write security partition to phone... OK
Unlock bootloader done!
Selected "Disable VBMETA verification"
Read security partition from phone... OK
Write security partition to phone... OK
Write IMEI and patch CERT [NVRAM]... OK
Write partition "nvdata"... OK
Write partition "nvram"... OK
Repair Security and Patch cert done!
If your phone after repair keeps rebooting - use wipe data option.

 

[aliipi]

Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : vivo
Product Manufacturer : vivo
Product Model : V2120
Product Name : 2020
Product Device : 2120
Product Board : k65v1_32_bsp_2g_ago
Board Platform : mt6765
Build ID : RP1A.200720.012
Build Date : Fri Oct 29 15:39:26 CST 2021
Display ID : RP1A.200720.012 release-keys
Security Patch : 2021-10-01
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : eng.compil.20211029.154246
Userdata FS Type : F2FS
Read security partition from phone...
Decrypting security data... OK
Encrypt security data... OK
Reading security from phone... op_result:[Authentication Key not yet programmed]


Selected model: Vivo V2204 (Vivo Y16)
Operation: Repair
Software version: 7.5

 

[GsmToto]

Selected model: Spreadtrum Spreadtrum
Operation: Erase FRP
Software version: 7.5


Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM2
Port: USB\VID_1782&PID_4D00\2&BF8C985&0&8
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: SC7731E
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 6005766471002888
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : VILLAON
Product Manufacturer : VILLAON
Product Model : VILLAON V501W
Product Name : V501W_OP_1
Product Device : VILLAON_V20_SE
Product Board : sp7731e_1h10
Board Platform : sp7731e
Build ID : TP1A.220624.014
Build Date : Wed May 22 10:41:21 CST 2024
Display ID : VILLAON-V501W-MU7702-TGo-OP-20240522V20
Security Patch : 2024-05-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 1712965066
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Done!

 

[GsmToto]

elected model: Tecno KL4 (Tecno Spark Go 1)
Operation: Erase FRP
Software version: 7.5

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to NONE... OK
Connect phone to [PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM3
Port: USB\VID_1782&PID_4D00\5&2E40154&0&7
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T616_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 1291437488001331
Flash Type: EMMC
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO
Product Model : TECNO KL4
Product Name : KL4-OPPJ
Product Device : TECNO-KL4
Product Board : TECNO-KL4
Board Platform : ums9230
Build ID : TP1A.220624.014
Build Date : Fri Jul 26 22:07:58 CST 2024
Display ID : KL4-F201JKLW-UGo-OPPJ-PJ-240726V133
Security Patch : 2024-07-05
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : 240726V133
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Done!

 

[dev.rayhan954]

please fix all realme spd and mtk boot error

Selected model: Realme RMX3834 (Realme Note 50)
Operation: Flash
Software version: 7.5
Work ID: 45193590

Loading packet file... OK
Init partition data... OK
Init files... OK
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM18
Port: USB\VID_1782&PID_4D00\5&2E786FD2&0&9
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Load files... OK
Selected processor: Tiger_T612_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... error(22)

 

[GsmToto]

Selected model: Lg Qualcomm
Operation: Erase FRP And Wipe
Software version: 7.5

Waiting for device... OK
Device found at COM3
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 253005452
Sahara ver: 2
OEM PK HASH: 2CF7619A278D26073F7EEA79BB7F4B728C221487FEA058EA0 72CFFE38CE1428
CPU: MSM8996Pro
Vendor: LG
MSM HW ID: 0005F0E100310000
SBL SW Ver: 00000000
Prepare custom loader file... OK
Loader hash: 2DE7D29FA7B52827903CACC5850FF3916A52DBF5
Loader PK hash: 2CF7619A278D2628F7EEA79BB7F4B7949C221487FEA058EA0 72CFFE38CE1428
Loader version: 3.5
Sending loader... OK
FireHose initialization... OK
Detecting memory type... OK [UFS]
Get storage info... OK
Storage info:
Type: UFS
Name: H28U62301AMR
Page size: 1000
Block size: 1000
Partition count: 7
LU0 size: 0x075EC00000
LU1 size: 0x0002000000
LU2 size: 0x0000800000
LU3 size: 0x0000800000
LU4 size: 0x000E800000
LU5 size: 0x0000800000
LU6 size: 0x0000800000
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... OK
Product Brand : lge
Product Manufacturer : LGE
Product Model : LG-AS993
Product Name : lucye_acg_us
Product Device : lucye
Product Board : msm8928
Board Platform : msm8928
Build ID : OPR1.170623.032
Build Date : Thu Aug 9 12:28:19 KST 2018
Display ID : OPR1.170623.032
Security Patch : 2018-08-01
Version SDK : 26
Version Release : 8.0.0
Version Codename : REL
Firmware Version : 1822112152128
Erase FRP... OK
Formatting "userdata" partition... OK
Creating default filesystem [F2FS]... OK
Formatting "cache" partition... OK
Creating default filesystem [EXT4]... OK
Done!

 

[GsmToto]

Selected model: Lg Qualcomm
Operation: Read Partitions
Software version: 7.5

Waiting for device... OK
Device found at COM3
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 2540054242
Sahara ver: 2
OEM PK HASH: 2CF7619A278D26043F7EEA79BB7F4B7944C221487FEA058EA0 72CFFE38CE1494
CPU: MSM8996Pro
Vendor: LG
MSM HW ID: 0005F0E100310000
SBL SW Ver: 00000000
Prepare custom loader file... OK
Loader hash: 2DE7D29FA7B59324903CACC5850FF3916A52DBF4
Loader PK hash: 2CF7619A278D2604F7EEA79BB7F4B7449C221487FEA058EA0 72CFFE38CE1494
Loader version: 3.5
Sending loader... OK
FireHose initialization... OK
Detecting memory type... OK [UFS]
Get storage info... OK
Storage info:
Type: UFS
Name: H28U62401AMR
Page size: 1000
Block size: 1000
Partition count: 7
LU0 size: 0x075EC00000
LU1 size: 0x0002000000
LU2 size: 0x0000800000
LU3 size: 0x0000800000
LU4 size: 0x000E800000
LU5 size: 0x0000800000
LU6 size: 0x0000800000
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... OK
Product Brand : lge
Product Manufacturer : LGE
Product Model : LG-AS993
Product Name : lucye_acg_us
Product Device : lucye
Product Board : msm8996
Board Platform : msm8996
Build ID : OPR1.170623.032
Build Date : Thu Aug 9 12:28:19 KST 2018
Display ID : OPR1.170623.032
Security Patch : 2018-08-01
Version SDK : 26
Version Release : 8.0.0
Version Codename : REL
Firmware Version : 1822112281521
Read partition "gpt_main0"... OK
Read partition "laf"... OK
Read partition "lafbak"... OK
Read partition "mpt"... OK
Read partition "drm"... OK
Read partition "sns"... OK
Read partition "misc"... OK
Read partition "factory"... OK
Read partition "encrypt"... OK
Read partition "eksst"... OK
Read partition "rct"... OK
Read partition "ssd"... OK
Read partition "keystore"... OK
Read partition "carrier"... OK
Read partition "persist"... OK
Read partition "system"... OK
Read partition "cache"... OK
Read partition "grow"... OK
Read partition "gpt_backup0"... OK
Read partition "gpt_main1"... OK
Read partition "xbl"... OK
Read partition "xblbak"... OK
Read partition "fota"... OK
Read partition "fsg"... OK
Read partition "dip"... OK
Read partition "devinfo"... OK
Read partition "grow2"... OK
Read partition "gpt_backup1"... OK
Read partition "gpt_main2"... OK
Read partition "xbl2"... OK
Read partition "xbl2bak"... OK
Read partition "grow3"... OK
Read partition "gpt_backup2"... OK
Read partition "gpt_main3"... OK
Read partition "ddr"... OK
Read partition "reserve"... OK
Read partition "cdt"... OK
Read partition "grow4"... OK
Read partition "gpt_backup3"... OK
Read partition "gpt_main4"... OK
Read partition "boot"... OK
Read partition "recovery"... OK
Read partition "recoverybak"... OK
Read partition "tz"... OK
Read partition "tzbak"... OK
Read partition "aboot"... OK
Read partition "abootbak"... OK
Read partition "raw_resources"... OK
Read partition "raw_resourcesbak"... OK
Read partition "rpm"... OK
Read partition "rpmbak"... OK
Read partition "hyp"... OK
Read partition "hypbak"... OK
Read partition "pmic"... OK
Read partition "pmicbak"... OK
Read partition "devcfg"... OK
Read partition "devcfgbak"... OK
Read partition "modem"... OK
Read partition "sec"... OK
Read partition "keymaster"... OK
Read partition "keymasterbak"... OK
Read partition "cmnlib"... OK
Read partition "cmnlibbak"... OK
Read partition "cmnlib64"... OK
Read partition "cmnlib64bak"... OK
Read partition "apdp"... OK
Read partition "msadp"... OK
Read partition "dpo"... OK
Read partition "grow5"... OK
Read partition "gpt_backup4"... OK
Read partition "gpt_main5"... OK
Read partition "modemst1"... OK
Read partition "modemst2"... OK
Read partition "fsc"... OK
Read partition "grow6"... OK
Read partition "gpt_backup5"... OK
Read partition "gpt_main6"... OK
Read partition "persistent"... OK
Read partition "grow7"... OK
Read partition "gpt_backup6"... OK
Saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/QCOM/Lg_Qualcomm_DUMP_(2024-10-8_1-42-47)/
Done!

 

[GsmToto]

Selected model: Lg LM-G900 (LG Velvet 5G)
Operation: Erase FRP
Software version: 7.5


Waiting for device... OK
Device found at COM20
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 67565944
Sahara ver: 2
OEM PK HASH: E746E34F7374VB40212CF29F0C0CAB9HY038AA8BCE6C097E82CC93213020EKM
CPU: SM7250-AA (Snapdragon 765 5G)
Vendor: LG
MSM HW ID: 0011E0E100310000
SBL SW Ver: 00000000
Prepare loader file... downloading... OK
Loader hash: 30F3RRF639B2CA6HJA3DBA5413EF4D9617C3CAKM
Loader PK hash: E746E34F737403F40212CF29F0C0CAB9F1038AA8BDE6C097E82HH66213020EDBJM967BFE180AE14C9AFB4DAC9C83E2KM
Loader version: 6.5
Sending loader... OK
FireHose initialization... OK
Detecting memory type... OK [UFS]
Get storage info... OK
Storage info:
Type: UFS
Name: KM2V8001CM-B707
Page size: 1000
Block size: 1000
Partition count: 7
LU0 size: 0x1D73000000
LU1 size: 0x0000800000
LU2 size: 0x0000800000
LU3 size: 0x0000400000
LU4 size: 0x0055000000
LU5 size: 0x0001000000
LU6 size: 0x0000400000
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... OK
Product Brand : lge
Product Manufacturer : LGE
Product Model : LM-G900
Product Name : caymanlm
Product Device : caymanlm
Product Board : lito
Board Platform : lito
Build ID : SKQ1.211103.001
Build Date : Wed Nov 30 16:27:41 KST 2022
Security Patch : 2022-12-01
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : 2233416304ac7
Userdata FS Type : F2FS
Erase FRP... OK
Done!

 

[GsmToto]

Selected model: Xiaomi Redmi A3 (Blue)
Operation: Erase FRP
Software version: 7.5

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000007]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x72F3C33C, 0x84F177EA, 0x5F797F8E, 0x682A3933
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: C09E00
EMMC_ID : 0xD62D00433039453030512920E5942B33
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0E92EC0000 (58.30Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x00C0000000 (3.00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM disabled !!!
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : Redmi
Product Manufacturer : Xiaomi
Product Model : blue
Product Name : blue_global
Product Device : blue
Product Board : blue
Board Platform : mt6765
Build ID : SP1A.210812.016
Build Date : Thu Mar 28 17:47:24 CST 2024
Display ID : 14 V816.0.5.0.UGRMIXM
Security Patch : 2024-03-01
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : V816.0.5.0.UGRMIXM
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Xiaomi_Redmi%20A3%20(Blue)/FRP_BACKUP_(2024-10-9_912-22-32)/
Format FRP... OK
Erase FRP done!

 

[GsmToto]

Selected model: Vivo PD2139BF (Vivo Y21 (2021))
Operation: Repair
Software version: 7.5


Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xCBE56B80, 0xADFEF90C, 0xB16FBFC3, 0x4D18F9M
Load DownloadAgent... OK
Search DA... OK [2]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [7]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DP6DBB
EMMC_ID : 0x1501004450364442420259C5CE6319SM
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 40% - 50% device life time used
DeviceLifeTimeEstB: 20% - 30% device life time used
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM disabled !!!
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : vivo
Product Manufacturer : vivo
Product Model : V2149
Product Name : 2149
Product Device : 2149
Product Board : k62v1_64_bsp
Board Platform : mt6765
Build ID : RP1A.200720.012
Build Date : Wed Feb 21 10:53:43 CST 2024
Display ID : RP1A.200720.012 release-keys
Security Patch : 2024-02-01
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : eng.compil.20240221.105718
Userdata FS Type : EXT4
Read security partition from phone...
Decrypting security data... OK
Encrypt security data... OK
Reading security from phone... OK
IMEI 1: 86164359922
IMEI 2: 86162560985
Set new IMEI to:
IMEI 1: 35945689255
IMEI 2: 35925678126
Searching security key... found! [3]
Writing security to phone... OK
Repair Security done!

 

[GsmToto]

Selected model: OPPO CPH2531 (Oppo Reno10 (China) 5G)
Operation: Repair
Software version: 7.5


Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1662 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0939
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6877]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x3097BD7C, 0x41C02175, 0x8A1BCCCD, 0xB744C13D
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [17]
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : H9QT1G6DN6X139
UFS_FWVER : A003
BLOCK_SIZE: 0x0000001000 (4.00Kb)
UFS_LU0 : 0x0000400000 (4.00Mb)
UFS_LU1 : 0x0000400000 (4.00Mb)
UFS_LU2 : 0x3B96000000 (238.34Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0200000000 (8.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : OPPO
Product Manufacturer : OPPO
Product Model : CPH2531
Product Name : CPH2531
Product Device : OP5705L1
Product Board : k6877v1_64_k419
Board Platform : mt6877
Build ID : SP1A.210812.016
Build Date : Thu Apr 25 10:44:59 CST 2024
Display ID : CPH2531_14.0.0.600(EX01)
Security Patch : 2024-04-05
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : T.R4T2.17c8306-c8af
Userdata FS Type : F2FS
Read security partition from phone...
Decrypting security data... OK
Encrypt security data... OK
Read partition "nvdata"... OK
Read partition "protect1"... OK
Read partition "nvram"... OK
Read NVDATA files... OK
Read NVRAM files... OK
Read security files... OK
Calculating... OK
Repairing IMEI...
IMEI 1: 865896615609863
IMEI 2: 865076459042247
Write IMEI and patch CERT [NVDATA]... OK
Checking patch type... patch impossible

 

[GsmToto]

Selected model: Tecno BC2c (Tecno Pop 4)
Operation: Erase FRP And Wipe
Software version: 7.5

Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM3
Port: USB\VID_1782&PID_4D00\6&298C69D9&0&3
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.39.38.134]
Port type: skip(6)
Connecting to device... OK
Selected processor: SC7731E
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 06150350CK001633
Read partitions info... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO
Product Model : TECNO BC2c
Product Name : BC2c-OP
Product Device : TECNO-BC2c
Product Board : sp7731e_1h10
Board Platform : sp7731e
Build ID : QP1A.190711.020
Build Date : Fri Aug 6 14:31:36 CST 2021
Display ID : BC2c-SP592AB-QGo-OP-210806V033
Security Patch : 2021-08-05
Version SDK : 29
Version Release : 10
Version Codename : REL
Firmware Version : AB-OP-210806V033
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Creating default filesystems... [CACHE: EXT4] ... [USERDATA: F2FS] ... OK
Done!

 

[GsmToto]

Selected model: Xiaomi Redmi A3 (Blue)
Operation: Erase FRP
Software version: 7.5


Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000007]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x1D8D206N, 0xD8FD2BD8, 0x7E4E547D, 0x93F84EM6
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: Y0S064
EMMC_ID : 0x9B010059305DN363400714A580F6A33
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E90000000 (58.25Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x00C0000000 (3.00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM disabled !!!
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : Redmi
Product Manufacturer : Xiaomi
Product Model : blue
Product Name : blue_eea
Product Device : blue
Product Board : blue
Board Platform : mt6765
Build ID : SP1A.210812.016
Build Date : Tue May 28 21:06:19 CST 2024
Display ID : 14 V816.0.7.0.UGREUSV
Security Patch : 2024-05-01
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : V816.0.7.0.UGREUSV
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Xiaomi_Redmi%20A3%20(Blue)/FRP_BACKUP_(2024-10-12_20-10-11)/
Format FRP... [P1] OK
Erase FRP done!