Z3X Pandora PRO 6.7 Update. Lot of new phones added.

[GsmToto]

Selected model: Mediatek Mediatek
Operation: Unlock network
Software version: 6.7
Work ID: 250741123

Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM4 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x775D4A94, 0x3D11B411, 0xF0DE17EC, 0xEC9E78BC
Get Chip ID... [MT6761]
Get SOC ID... [8DCEDF4AD63409563EB7D573ECD8F42FDE2980F322EE9841FC 028A0D294DF0A9]
Get sec config... OK [00000000]
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100524331344D421275611855893H
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: RC14MB
EMMC_ID : 0x150100524331344D421275611855893H
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : Dialn
Product Manufacturer : Dialn
Product Model : Neo
Product Name : NeoA
Product Device : NeoA
Product Board : Neo
Board Platform : mt6761
Build ID : SP1A.210812.016
Build Date : Tue Dec 5 20:01:38 CST 2023
Display ID : TP1A.220624.012
Security Patch : 2023-11-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 20231108.2030
Read security partition from phone... OK
Read security files... OK
Read NVDATA files... OK
Calculating... OK
Read lock info... OK
Unlock... OK [DF1, UN]
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!

 

[androimran786]

I Have A Phone Oppo Reno 6 Pro 5G (CPH2249) Before Flashing Phone Is Fully Working And Mtk Port Working Well.
But I want Do downgrade The Software Version So i Downloaded Older Version From Pandora Box And Flash it.
But After Flashing Phone Is Booting For The 2nd logo then Restart Again And Again.
Before Flashing i Made a Firmware backup
So when i tried to flash my backup file my phone not Boot in to download mode means No MTK port show
My Pc Device Manager not Detect this phone Also i tried to connect on another pc but Still No Mtk port Connect
i Think mtk port is disabled so please give me Any Solution
Is there is any test point for cph2249 so please tell me i already check on internet but nothing found
Also if you have ota update package for cph2249 that i can flash it using recovery mode please provide me I already checked on internet but nothing found.
Please help me.
Also i want to report for bad firmware for cph2249 on z3x pandora box so please reupload it on your server
Thanks in Advance .

 

[GsmToto]

Selected model: Tecno BF6 (Tecno Pop 7)
Operation: Unlock network
Software version: 6.7
Work ID: 254325512

Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM3
Port: USB\VID_1782&PID_4D00\6&3999ACA5&0&6
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: SC9863A_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 102421539M001272
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO
Product Model : TECNO BF6
Product Name : BF6-KESF
Product Device : TECNO-BF6
Product Board : BF6KESF
Board Platform : sp9863a
Build ID : SP1A.210812.001
Build Date : Fri Apr 21 12:47:14 CST 2023
Display ID : BF6-SE668SB-SGo-KESF-DC-230421V41
Security Patch : 2023-04-05
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : 230421V41
Userdata FS Type : F2FS
Check security state... OK [1]
Unlock bootloader... OK
Patch modem check...
Patch data... OK
Load NVD... OK
Unlock... OK
Save NVD... OK
Done!
If your phone after this operation keeps rebooting - use wipe data option.

 

[GsmToto]

Selected model: Realme RMX3517 (Realme Narzo 50A Prime)
Operation: Erase FRP And Wipe
Software version: 6.7

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to NONE... OK
Connect phone to [PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... timeout


Selected model: Realme RMX3517 (Realme Narzo 50A Prime)
Operation: Erase FRP And Wipe
Software version: 6.7

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to NONE... OK
Connect phone to [PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM3
Port: USB_1782&PID_4D005&771F8DF&0&2
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T612_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 0N52427I29101401
Flash Type: UFS
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : realme
Product Manufacturer : realme
Product Model : RMX3516
Product Name : ums9230_nico_Natv
Product Device : ums9230_nico
Product Board : ums9230_nico
Board Platform : ums9230
Build ID : RP1A.201005.001
Build Date : Wed Aug 31 11:28:37 CST 2022
Display ID : RMX3516PU_11_A.33
Security Patch : 2022-08-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 550
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Creating default filesystems... [CACHE: EXT4] ... [USERDATA: F2FS] ... OK
Done!

 

[aliipi]

Selected model: Vivo PD2317KF (Vivo Y17s)
Operation: Erase FRP
Software version: 6.7

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1633 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM17 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xDA56C591, 0x163251F4, 0xD24BD6FD, 0x93A8CAF0
Load DownloadAgent... OK
Search DA... OK [3]
Send bootloader... error(DA_IN_BLACKLIST)

 

[GsmToto]

Selected model: OPPO PFTM10 (Oppo A97 5G)
Operation: Read Codes
Software version: 6.7

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1633 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x77BFC426, 0xA0131FBB, 0x6B9A2DDF, 0x6DB242B1
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
UFS CID (FW VER): H9QT1GGBN6X129 (A043)
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [14]
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : H9QT1GGBN6X129
UFS_FWVER : A043
BLOCK_SIZE: 0x0000001000 (4.00Kb)
UFS_LU0 : 0x0000400000 (4.00Mb)
UFS_LU1 : 0x0000400000 (4.00Mb)
UFS_LU2 : 0x3B96000000 (238.34Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : OPPO
Product Manufacturer : OPPO
Product Model : PFTM10
Product Name : PFTM10
Product Device : OP526D
Product Board : k6833v1_64_k419
Board Platform : mt6833
Build ID : TP1A.220905.001
Build Date : Wed Jan 31 01:02:54 CST 2024
Display ID : PFTM10_11_C.41
Security Patch : 2024-02-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : S.1620ee4_2492b
Read security partition from phone... OK
Read security files... OK
Calculating... OK
Read lock info... OK
N Code : 12345678
NS Code : 56781234
SP Code : 11112222
C Code : 33334444
SIM Code : 55556666
NS_SP Code: 77778888
SIM_C Code: 99990000
Read Codes done!