Z3X Pandora PRO 6.7 Update. Lot of new phones added.

[muahaamd amin]

Pandora Pro team ur all tim great update
this tim need vivo tecno infinex security patch 2024 FRP&ETC need i hope ur next update fix this ishu
keep it up

 

[GsmToto]

Selected model: Infinix X669 (Infinix Hot 30i NFC)
Operation: Erase FRP
Software version: 6.7

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM5
Port: USB\VID_1782&PID_4D00\6&17B2F180&0&2
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: INFINIX/Tiger_T606_64&X669
Load files... (INFINIX/X669) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 10047643Xe446
Flash Type: UFS
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : Infinix
Product Manufacturer : INFINIX
Product Model : Infinix X669
Product Name : X669-GL
Product Device : Infinix-X669
Product Board : Infinix-X669
Board Platform : ums9230
Build ID : SP1A.210812.016
Build Date : Sun Feb 18 18:35:55 CST 2024
Display ID : X669-F065FGHIJK-S-GL-20240218V53X
Security Patch : 2024-02-05
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : GL-20240218V5S3
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Done!

 

[aliipi]

Pandora Pro Update 6.7 Lot of new phones added.

Added support Micromax phones:

- E7446 In note 2
- E7533 In 1b
- E7746 In note 1
- HS1 Canvas Infinity Life
- N8216 Infinity N11
- N8301 Infinity N12
- Q409 Bolt Supreme 6
- Q411 Canvas Fire 4
- Q412 Canvas Fire 4G Plus
- Q413 Canvas Xpress 4G
- Q414 Canvas Blaze 4G+
- Q417 Canvas Mega 4G
- Q4204 Bharat 5 Infinity
- Q424 Bolt Selfie


Added support Lava phones:

- LZG408 X3
- LZX403 Blaze
- LZX404 Blaze Pro
- LZX407 Blaze NXT
- LZX408 Yuva 2 Pro
- LZG403 Z3
- LZG403 25 Z3 Pro
- LZG404 X3

Added support Hisense phones:

- HLTE228E Hisense Infinity E50 Lite
- HLTE228E.13
- HLTE228E.20 Hisense E50 Lite
- HLTE229E.10 Hisense E40
- HLTE229E.12 Hisense V40
- HLTE229E.30 Hisense V40S
- HLTE232E Hisense E50
- HLTE233E Hisense Infinity H50 Lite
- HLTE235E Hisense E60 Lite
- HLTE236E Hisense E60
- HLTE240E Hisense Infinity H60 Smart
- HLTE240E.10 Infinity H60 Lite


Added support Dexp phones:

- Ursus P410
- Ursus P510
- Ursus Q110
- Ursus Q180
- Ursus Q210
- Ursus Q280
- Ursus Q310
- Ursus R110
- Ursus R180
- Ursus S270i
- Ursus S280
- Ursus S370
- Ursus VA110
- Ursus VA210


Added support Bmobile phones:

- AX1076
- AX1076P+
- B50 ProSS
- B70 Pro
- BL40
- BL50 Pro
- BL51
- BL52 Pro
- BL53
- BL54 Pro
- BL60M
- BL61
- BL62
- BL63
- BL63 Pro
- BL65
- BL65+
- Speed 5
- Ultra


Added support:

- TCL 30 LE - 4188S, 4188SPP


Added support:

- Nokia C32 - TA-1542, TA-1548


Improved Unlock operation for Mediatek phones


Fixed:
- download files
- some bugs


DO NOT POST ANY LOGS OF JOB HERE in this thread, if you have any error - open own thread and supporters will answer there!!!

List of resellers with stock: HERE

Selected model: Vivo V2120 (Vivo Y15s)
Operation: Erase FRP And Wipe
Software version: 6.7
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1633 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM17 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x56BC0495, 0x321516B8, 0x991EF231, 0xB5B58814
Load DownloadAgent... OK
Search DA... OK [2]
Send bootloader... error(DA_IN_BLACKLIST)

 

[GsmToto]

Selected model: Nokia TA-1535 (Nokia C12)
Operation: Read Flash Info
Software version: 6.7
Work ID: 2377230512

Connecting to device... OK
Selected processor: SC9863A_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: E781235342306733
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : Nokia
Product Manufacturer : HMD Global
Product Model : Nokia C12
Product Name : Nova_00WW
Product Device : NVA
Product Board : Nova
Board Platform : sp9863a
Build ID : SP1A.210812.016
Build Date : Thu Sep 21 08:45:26 UTC 2023
Display ID : 00WW_1_370_SP01
Security Patch : 2023-09-05
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : 00WW_1_37A
Userdata FS Type : F2FS
Done!

 

[GsmToto]

Selected model: Tecno KG5k (Tecno Spark 8C)
Operation: Erase FRP And Wipe
Software version: 6.7

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM5
Port: USB\VID_1782&PID_4D00\6&17B2F180&0&2
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T606_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 0803037236010331
Flash Type: EMMC
Read partitions info... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO MOBILE LIMITED
Product Model : TECNO KG5k
Product Name : KG5k
Product Device : TECNO-KG5k
Product Board : KG5k
Board Platform : ums9230
Build ID : RP1A.201005.001
Build Date : Wed Aug 23 11:45:21 CST 2023
Display ID : KG5k-F062-11.0-GL-V245-20230823
Security Patch : 2023-08-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 686
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Creating default filesystems... [CACHE: EXT4] ... [USERDATA: F2FS] ... OK
Done!

 

[anas203203203]

Selected model: Vivo V2050 (Vivo V21e 5G)
Operation: Reset password
Software version: 6.7
This procedure will erase all downloaded apps and their data.
Photos, music, and other non-app will be retained. Continue? YES
Work ID: 295493114

Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM2 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0996
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6853]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xE8C40DF5, 0xB99F7362, 0x849FB5FD, 0xB15BC5B2
Load DownloadAgent... OK
Search DA... OK [8]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
UFS CID (FW VER): KM8V8001JM-B813 (1900)
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [15]
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : KM8V8001JM-B812
UFS_FWVER : 1900
BLOCK_SIZE: 0x0000001000 (4.00Kb)
UFS_LU0 : 0x0000400000 (4.00Mb)
UFS_LU1 : 0x0000400000 (4.00Mb)
UFS_LU2 : 0x1DCB000000 (119.17Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM disabled !!!
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : vivo
Product Manufacturer : vivo
Product Model : V2050
Product Name : 2050N
Product Device : 2050
Product Board : k6853v1_64_6360
Board Platform : mt6853
Build ID : RP1A.200720.012
Build Date : Fri Dec 24 15:47:09 CST 2021
Display ID : RP1A.200720.012 release-keys
Security Patch : 2021-12-01
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : eng.compil.20211224.155033
Read info from phone... OK
Processing data #1... OK
Processing data #2... OK
Reset Password done!

infinix, tecno, vivo new sec about thinks only fake update and old plz with timely fast like others.

 

[mdarfin]

infinix, tecno, vivo new sec about thinks only fake update and old plz with timely fast like others.

Selected model: Vivo PD2140 (Vivo Y15s)
Operation: Read Flash Info
Software version: 6.7
Work ID: 24055291

Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1633 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM12 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x441D537F, 0x0A4585FD, 0xFCA1D6D9, 0x3D32EB6E
Load DownloadAgent... OK
Search DA... OK [2]
Send bootloader... error(DA_IN_BLACKLIST)

 

[mdarfin]

Pandora Pro Update 6.7 Lot of new phones added.

Added support Micromax phones:

- E7446 In note 2
- E7533 In 1b
- E7746 In note 1
- HS1 Canvas Infinity Life
- N8216 Infinity N11
- N8301 Infinity N12
- Q409 Bolt Supreme 6
- Q411 Canvas Fire 4
- Q412 Canvas Fire 4G Plus
- Q413 Canvas Xpress 4G
- Q414 Canvas Blaze 4G+
- Q417 Canvas Mega 4G
- Q4204 Bharat 5 Infinity
- Q424 Bolt Selfie


Added support Lava phones:

- LZG408 X3
- LZX403 Blaze
- LZX404 Blaze Pro
- LZX407 Blaze NXT
- LZX408 Yuva 2 Pro
- LZG403 Z3
- LZG403 25 Z3 Pro
- LZG404 X3

Added support Hisense phones:

- HLTE228E Hisense Infinity E50 Lite
- HLTE228E.13
- HLTE228E.20 Hisense E50 Lite
- HLTE229E.10 Hisense E40
- HLTE229E.12 Hisense V40
- HLTE229E.30 Hisense V40S
- HLTE232E Hisense E50
- HLTE233E Hisense Infinity H50 Lite
- HLTE235E Hisense E60 Lite
- HLTE236E Hisense E60
- HLTE240E Hisense Infinity H60 Smart
- HLTE240E.10 Infinity H60 Lite


Added support Dexp phones:

- Ursus P410
- Ursus P510
- Ursus Q110
- Ursus Q180
- Ursus Q210
- Ursus Q280
- Ursus Q310
- Ursus R110
- Ursus R180
- Ursus S270i
- Ursus S280
- Ursus S370
- Ursus VA110
- Ursus VA210


Added support Bmobile phones:

- AX1076
- AX1076P+
- B50 ProSS
- B70 Pro
- BL40
- BL50 Pro
- BL51
- BL52 Pro
- BL53
- BL54 Pro
- BL60M
- BL61
- BL62
- BL63
- BL63 Pro
- BL65
- BL65+
- Speed 5
- Ultra

Selected model: Vivo PD2140 (Vivo Y15s)
Operation: Read Flash Info
Software version: 6.7
Work ID: 24055291

Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1633 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM12 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x441D537F, 0x0A4585FD, 0xFCA1D6D9, 0x3D32EB6E
Load DownloadAgent... OK
Search DA... OK [2]
Send bootloader... error(DA_IN_BLACKLIST)

Added support:

- TCL 30 LE - 4188S, 4188SPP


Added support:

- Nokia C32 - TA-1542, TA-1548


Improved Unlock operation for Mediatek phones


Fixed:
- download files
- some bugs


DO NOT POST ANY LOGS OF JOB HERE in this thread, if you have any error - open own thread and supporters will answer there!!!

List of resellers with stock: HERE

 

[aliipi]

ALL 3THEE METHODS FAIL

Selected model: Tecno KI7 (Tecno Spark 10 Pro)
Operation: Erase FRP
Software version: 6.7

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1633 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM57 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xE2C2D1BE, 0x47640C83, 0x3000D888, 0x24EDEDFB
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... error(DA_INIT_KEY_FAIL). Secure DA agent not compatible for this preloader.
Try select other DA type.

 

[aliipi]

all 3three method types fail

Selected model: Infinix X6835B (Infinix Hot 30 Play NFC)
Operation: Erase FRP
Software version: 6.7

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1633 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM14 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x1CA6A970, 0x710D08AD, 0xEA198E76, 0x252248A3
Load DownloadAgent... OK
Search DA... not found
Advanced Authorization (Preloader) not supported for this CPU

 

[GsmToto]

Selected model: Tecno LH7n (Tecno Pova 5)
Operation: Eliminar FRP
Software version: 6.7

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 1208
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6789]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x83DEF8C7, 0x8EA8D2E4, 0x21477992, 0x9EEFBE10
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... OK
Start bootloader... OK
Setup device enviroment... OK
Setup device parametres... OK
Get device info... OK
UFS CID (FW VER): eUFS2.2_256 ()
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [0]
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : eUFS2.2_256
UFS_FWVER :
BLOCK_SIZE: 0x0000001000 (4,00Kb)
UFS_LU0 : 0x0000400000 (4,00Mb)
UFS_LU1 : 0x0000400000 (4,00Mb)
UFS_LU2 : 0x3BAD800000 (238,71Gb)
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO
Product Model : TECNO LH7n
Product Name : LH7n-GL
Product Device : TECNO-LH7n
Product Board : mgvi_64_nfc_armv82
Board Platform : common
Build ID : SP1A.210812.016
Build Date : Mon Jan 15 17:39:36 CST 2024
Display ID : TECNO-T-64-ARMV82-240115V501
Security Patch : 2024-01-01
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 240115V711
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Tecno_LH7n%20(Tecno%20Pova%205)/FRP_BACKUP_(2024-5-4_12-35-7)/
Writting FRP data... OK
Erase FRP done!

 

[GsmToto]

Selected model: Samsung SM-M136B (Samsung Galaxy M13 5G)
Operation: Erase FRP
Software version: 6.7

Searching USB Flash interface... COM3 detected
Setup connection... OK
Model: SM-M156B
SW version: M156BXXU1AXB4
Sales code: EUX
Device ID: 3096f39123769633
Vendor: SAMSUNG
Product: KM5L9001DA-B424
Unique Number: CE11237BE5653557357X
FW Version: 0004
Capacity: 128 Gb
Reading data from phone... OK
Sending data to phone... OK
Rebooting to download... OK
Searching USB Flash interface... COM3 detected
Setup connection... OK
Sending data to phone... OK
Sending data to phone... OK
Rebooting... OK
Erase FRP done!

 

[GsmToto]

Selected model: Spreadtrum Spreadtrum
Operation: Read RPMB
Software version: 6.7

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM2
Port: USB\VID_1782&PID_4D00\6&18D0524&0&6
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: SC9863A
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 5023320346071801
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : ZTE
Product Manufacturer : ZTE
Product Model : ZTE Blade A54
Product Name : EEA_P963F64
Product Device : P963F64
Board Platform : sp9863a
Build ID : TP1A.220624.014
Build Date : Sat Nov 25 09:06:23 CST 2023
Display ID : MyOS13.0.1_A54_EEA
Security Patch : 2023-11-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 20231125.065051
Userdata FS Type : F2FS
Get RPMB page count... 0x00010000 OK
Read Write Counter[WC][MAX=0xFFFFFFFF]... 0x12C OK
Read RPMB... OK
Saved [RPMB_DUMP_5023324337811_2024-4-5_19-23-17.bin] to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/SPD/Spreadtrum_Spreadtrum/
Done!

 

[faraday]

Pandora Pro Update 6.7 Lot of new phones added.

Added support Micromax phones:

- E7446 In note 2
- E7533 In 1b
- E7746 In note 1
- HS1 Canvas Infinity Life
- N8216 Infinity N11
- N8301 Infinity N12
- Q409 Bolt Supreme 6
- Q411 Canvas Fire 4
- Q412 Canvas Fire 4G Plus
- Q413 Canvas Xpress 4G
- Q414 Canvas Blaze 4G+
- Q417 Canvas Mega 4G
- Q4204 Bharat 5 Infinity
- Q424 Bolt Selfie


Added support Lava phones:

- LZG408 X3
- LZX403 Blaze
- LZX404 Blaze Pro
- LZX407 Blaze NXT
- LZX408 Yuva 2 Pro
- LZG403 Z3
- LZG403 25 Z3 Pro
- LZG404 X3

Added support Hisense phones:

- HLTE228E Hisense Infinity E50 Lite
- HLTE228E.13
- HLTE228E.20 Hisense E50 Lite
- HLTE229E.10 Hisense E40
- HLTE229E.12 Hisense V40
- HLTE229E.30 Hisense V40S
- HLTE232E Hisense E50
- HLTE233E Hisense Infinity H50 Lite
- HLTE235E Hisense E60 Lite
- HLTE236E Hisense E60
- HLTE240E Hisense Infinity H60 Smart
- HLTE240E.10 Infinity H60 Lite


Added support Dexp phones:

- Ursus P410
- Ursus P510
- Ursus Q110
- Ursus Q180
- Ursus Q210
- Ursus Q280
- Ursus Q310
- Ursus R110
- Ursus R180
- Ursus S270i
- Ursus S280
- Ursus S370
- Ursus VA110
- Ursus VA210


Added support Bmobile phones:

- AX1076
- AX1076P+
- B50 ProSS
- B70 Pro
- BL40
- BL50 Pro
- BL51
- BL52 Pro
- BL53
- BL54 Pro
- BL60M
- BL61
- BL62
- BL63
- BL63 Pro
- BL65
- BL65+
- Speed 5
- Ultra


Added support:

- TCL 30 LE - 4188S, 4188SPP


Added support:

- Nokia C32 - TA-1542, TA-1548


Improved Unlock operation for Mediatek phones


Fixed:
- download files
- some bugs


DO NOT POST ANY LOGS OF JOB HERE in this thread, if you have any error - open own thread and supporters will answer there!!!

List of resellers with stock: HERE

Please login to view image

You are updating the pandora box but you forgot the z3x box, your greed will bring you trouble.

 

[aliipi]

Selected model: Infinix X665E (Infinix Hot 20i)
Operation: Erase FRP
Software version: 6.7

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1633 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM9 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xBB6197A8, 0x16C47A0E, 0x0D552376, 0x2EFD16BB
Load DownloadAgent... OK
Search DA... OK [3]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... error(STATUS_SEC_INVALID_DA_VER)

 

[GsmToto]

elected model: Mediatek Mediatek
Operation: Unlock network
Software version: 6.7
Work ID: 247445333

Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xD0BFF1AA, 0x1F4CBAD0, 0x7FA21422, 0x638D40F3
Get Chip ID... [MT6761]
Get SOC ID... [A0C7E26C0294DA807728256B9A9F2836276348590D76C1A2FC 1399D430779F9E]
Get sec config... OK [00000000]
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100524331344D42126551444389FX
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: RC14MB
EMMC_ID : 0x150100524331344D42126551444389FX
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : Dialn
Product Manufacturer : Dialn
Product Model : Neo
Product Name : NeoA
Product Device : NeoA
Product Board : Neo
Board Platform : mt6761
Build ID : SP1A.210812.016
Build Date : Wed Dec 20 18:48:06 CST 2023
Display ID : TP1A.220624.014
Security Patch : 2023-11-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 20231218.1530
Read security partition from phone... OK
Read security files... OK
Read NVDATA files... OK
Calculating... OK
Read lock info... OK
Unlock... OK [DF1, UN]
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!

 

[aliipi]

all 3three methods fail in preloader mode pandora team plz wake up again
Selected model: Tecno KE5j (Tecno Spark 6 Go)
Operation: Erase FRP And Wipe
Software version: 6.7
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1633 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM17 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xB14596E9, 0x2C2CD440, 0xF4295F31, 0x13C1201D
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... error(DA_INIT_KEY_FAIL). Secure DA agent not compatible for this preloader.
Try select other DA type.

 

[GsmToto]

Selected model: Alcatel 5009A (Alcatel 1C)
Operation: Eliminar FRP
Software version: 6.7

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 6580
Get sec config... OK [00000001]
Active sec flags: [SBC]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6580]
Library Version [1]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... FULL
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 6580
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6580]
Get sec config... OK [00000001]
Active sec flags: [SBC]
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 6580
Get sec config... OK [00000001]
Active sec flags: [SBC]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6580]
Library Version [1]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Load DownloadAgent... OK
ME_ID = 0x497B1396, 0xC1D3E6BB, 0x69AFD25B, 0x124DEDD2
Get BROM version... OK
Search DA... OK [26]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Checking bootloader answer... OK
Wait for answer from bootloader... OK
Wait for hw detection... OK
Wait DA version... v4.2
Send BROM version... OK
Send storage config... OK
SyncBmtInfoWithDA... OK
Set params... OK
Read flash info... OK
EMMC_ID: 0x460001154D32364502FE0342E11631AC
Load EMI from phone... OK
Init DRAM... OK
Enable DRAM... OK
Sync with DA... OK
Wait for DA H/W detection... OK
EMMC INFO:
EMMC_CNAME: FE62MB
EMMC_ID : 0x150100464536324D4203FE02AC3116E1
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0000400000 (4,00Mb)
EMMC_USER : 0x03A3E00000 (14,56Gb)
RAM INFO:
INT_SRAM: 0x0000020000 (128,00Kb)
EXT_RAM : 0x0040000000 (1,00Gb)
Checking USB status... USB_FULL_SPEED
Switching to USB high speed... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek DA USB VCOM (Android),usb2ser.sys,3.0.1504.0]
High Speed USB detected at COM0
Open port... OK
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TCL
Product Manufacturer : TCL
Product Model : 5009A
Product Name : 5009A
Product Device : U5A_PLUS_3G
Board Platform : mt6580
Build ID : NRD90M
Build Date : 2019年 02月 20日 星期三 12:57:33 CST
Display ID : NRD90M release-keys
Security Patch : 2019-01-05
Version SDK : 24
Version Release : 7.0
Version Codename : REL
Firmware Version : 5009A_OFCL_V3.0_20190220
Read partition frp... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Alcatel_5009A%20(Alcatel%201C)/FRP_BACKUP_(2024-4-11_18-23-44)/
Writting FRP data... OK
Erase FRP done!

 

[androimran786]

Please Add Vivo X100 Pro.
AMT Tool already Supported
I Need Support For Vivo X100 Pro IMEI Repair

 

[GsmToto]

Please Add Vivo X100 Pro.
AMT Tool already Supported
I Need Support For Vivo X100 Pro IMEI Repair

coming soon .