Legitunlocks.com
Martview MS-3D 3D Screwdriver

CS-Tool - MTK[MediaTek] Phones Success Reports

Status
Not open for further replies.
maanarman

maanarman

Friend's Martview
Dec 1, 2016
2,900
398
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Qmobile i9 write ff done


Code: 
 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0001
 CPU_HW: CA01
 CPU_ID: 6582
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 110100303034473930
 CHIP     : MT65820000
 CPU ID   :
 EMMC ID  : 110100303034473930
 EMMC Size: 4GB,  usable capacity: 3.69GB
 EMMC Name: eMMC_Toshiba_TYD0FH221618RA
 Read Hardware Information is done.
 Load File : F:\CHINA\QMOBILE\I9 Q MOBILE bin OK\I9 Q MOBILE\I9 Q MOBILE MTK6582_1411081457
 Image Size: 0x00000000BCF80644
 
 Programming Flash Image...
 Programming Flash Image Completed.
 
 Action completed
 Time taken : 00:10:43
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
 
maanarman

maanarman

Friend's Martview
Dec 1, 2016
2,900
398
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Qmobile S6 Write Flash Done

Code: 
 Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA00
 CPU_ID: 6580
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 150100513832334D42
 CHIP     : MT65800000
 CPU ID   :
 EMMC ID  : 150100513832334D42
 EMMC Size: 16GB,  usable capacity: 14.57GB
 EMMC Name: eMMC_Samsung_Q823MB
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : QMobile
 Phone Model    : QMobile S6
 Android Ver    : 6.0
 CPU/Processor  : MT6580
 MTK Project ver: D3679_DD36791_QMOBILE-S6_L119
 SW Version     : QMobileS6_MP_24_8
 Userdata State : Encrypted
 
 Action completed
 Time taken : 00:00:12
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
Code: 
 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA00
 CPU_ID: 6580
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 150100513832334D42
 CHIP     : MT65800000
 CPU ID   :
 EMMC ID  : 150100513832334D42
 EMMC Size: 16GB,  usable capacity: 14.57GB
 EMMC Name: eMMC_Samsung_Q823MB
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading lk ......ok
 Downloading boot ......ok
 Downloading recovery ......ok
 Downloading logo ......ok
 Downloading secro ......ok
 Downloading system ......ok
 Downloading cache ......ok
 Downloading userdata ...ok
 
 
 Action completed
 Time taken : 00:07:32
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
 
maanarman

maanarman

Friend's Martview
Dec 1, 2016
2,900
398
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Qmobile A65 Write FF done

Code: 
 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447316404
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447316404
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H9TP32A8JDACPR_KGM
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading pro_info ......ok
 Downloading nvram ......ok
 Downloading protect_f ......ok
 Downloading protect_s ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading misc ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:10:00
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
 
maanarman

maanarman

Friend's Martview
Dec 1, 2016
2,900
398
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Qmobile X30 Wirte Flash Done

Code: 
Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : TINNO
 Phone Model    : QMobile X30
 Android Ver    : 4.4.2
 CPU/Processor  : MT6572
 MTK Project ver: ALPS.KK1.MP7.V1
 SW Version     : ALPS.KK1.MP7.V1
 Userdata State : Normal
 
 Action completed
 Time taken : 00:00:10
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
Code: 
 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:03:02
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
 
maanarman

maanarman

Friend's Martview
Dec 1, 2016
2,900
398
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
QMOBILE X25 WRITE FF DONE

Code: 
 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM47 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447316404
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447316404
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H9TP32A8JDACPR_KGM
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading preloader ......ok
 Updating rom info ......ok
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:02:37
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
 
maanarman

maanarman

Friend's Martview
Dec 1, 2016
2,900
398
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Qmobile i5 Write Flash Done

Code: 
 Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0001
 CPU_HW: CA01
 CPU_ID: 6582
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447316404
 CHIP     : MT65820000
 CPU ID   :
 EMMC ID  : 90014A483447316404
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H9TP32A8JDACPR_KGM
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : QMobile
 Phone Model    : QMobile i5
 Android Ver    : 4.4.2
 CPU/Processor  : MT6582
 MTK Project ver: ALPS.KK1.MP1.V2.10
 SW Version     : ALPS.KK1.MP1.V2.10
 Userdata State : Normal
 
 Action completed
 Time taken : 00:00:08
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
Code: 
 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0001
 CPU_HW: CA01
 CPU_ID: 6582
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447316404
 CHIP     : MT65820000
 CPU ID   :
 EMMC ID  : 90014A483447316404
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H9TP32A8JDACPR_KGM
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:03:16
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
 
maanarman

maanarman

Friend's Martview
Dec 1, 2016
2,900
398
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
QMOBILE I5 WRITE FLASH DONE

Code: 
 Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0001
 CPU_HW: CA01
 CPU_ID: 6582
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447316404
 CHIP     : MT65820000
 CPU ID   :
 EMMC ID  : 90014A483447316404
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H9TP32A8JDACPR_KGM
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : QMobile
 Phone Model    : QMobile i5
 Android Ver    : 4.4.2
 CPU/Processor  : MT6582
 MTK Project ver: ALPS.KK1.MP1.V2.10
 SW Version     : ALPS.KK1.MP1.V2.10
 Userdata State : Normal
 
 Action completed
 Time taken : 00:00:08
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
Code:
Code: 
 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0001
 CPU_HW: CA01
 CPU_ID: 6582
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447316404
 CHIP     : MT65820000
 CPU ID   :
 EMMC ID  : 90014A483447316404
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H9TP32A8JDACPR_KGM
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:03:15
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
 
maanarman

maanarman

Friend's Martview
Dec 1, 2016
2,900
398
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Lenovo A319 Write Flash Done

Code: 
 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM140 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447316404
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447316404
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H9TP32A8JDACPR_KGM
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:04:15
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
 
maanarman

maanarman

Friend's Martview
Dec 1, 2016
2,900
398
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Qmobile X11 Write FF Done

Code: 
 Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447316404
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447316404
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H9TP32A8JDACPR_KGM
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : QMobile
 Phone Model    : QMobile X11
 Android Ver    : 4.4.2
 CPU/Processor  : MT6572
 MTK Project ver: ALPS.KK1.MP6.V1
 SW Version     : ALPS.KK1.MP6.V1
 Userdata State : Normal
 
 Action completed
 Time taken : 00:00:10
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
Code: 
 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447316404
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447316404
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H9TP32A8JDACPR_KGM
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:05:09
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
 
maanarman

maanarman

Friend's Martview
Dec 1, 2016
2,900
398
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Qmobile i8i Write FF Done

Code: 
 Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 1501004E35585A4D42
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 1501004E35585A4D42
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Samsung_N5XZMB
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : QMobile
 Phone Model    : A8i
 Android Ver    : 4.2.2
 CPU/Processor  : MT6572
 MTK Project ver: ALPS.JB3.MP.V1
 SW Version     : SV1.0
 Userdata State : Encrypted
 
 Action completed
 Time taken : 00:00:08
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
Code: 
 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 1501004E35585A4D42
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 1501004E35585A4D42
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Samsung_N5XZMB
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading ebr2 ......ok
 Downloading spdata ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Downloading fat ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:03:15
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
 
maanarman

maanarman

Friend's Martview
Dec 1, 2016
2,900
398
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Qmobile X70 Write FF Done

Code: 
 Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0001
 CPU_HW: CB00
 CPU_ID: 6582
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483847326404
 CHIP     : MT65820000
 CPU ID   :
 EMMC ID  : 90014A483847326404
 EMMC Size: 8GB,  usable capacity: 7.29GB
 EMMC Name: eMMC_Hynix_H8G2d
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : LINQ
 Phone Model    : LINQ X70
 Android Ver    : 4.4.2
 CPU/Processor  : MT6582
 MTK Project ver: ALPS.KK1.MP1.V2.10
 SW Version     : LINQ_X70_V005
 Userdata State : Normal
 
 Action completed
 Time taken : 00:00:09
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
Code: 
 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0001
 CPU_HW: CB00
 CPU_ID: 6582
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483847326404
 CHIP     : MT65820000
 CPU ID   :
 EMMC ID  : 90014A483847326404
 EMMC Size: 8GB,  usable capacity: 7.29GB
 EMMC Name: eMMC_Hynix_H8G2d
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading ebr2 ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Downloading fat ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:01:47
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
 
maanarman

maanarman

Friend's Martview
Dec 1, 2016
2,900
398
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Oppo R2001 Write FF Done

Code: 
 Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM6 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0001
 CPU_HW: CA01
 CPU_ID: 6582
 BV: FE
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 Warning: failed to init dram, loading default settings
 Waiting for DRAM detection...
 Selected: 3/5    ...
 Done. Size=0x0000000020000000
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447316404
 CHIP     : MT65820000
 CPU ID   :
 EMMC ID  : 90014A483447316404
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H9TP32A8JDACPR_KGM
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : OPPO
 Phone Model    : R2001
 Android Ver    : 4.2.2
 CPU/Processor  : MT6582
 MTK Project ver: R2001_11_A.16_160319
 SW Version     : R2001_11_160319
 Userdata State : Encrypted
 
 Action completed
 Time taken : 00:00:23
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
Code: 
 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM6 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0001
 CPU_HW: CA01
 CPU_ID: 6582
 BV: FE
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 Warning: failed to init dram, loading default settings
 Waiting for DRAM detection...
 Selected: 4/5    ...
 Done. Size=0x0000000020000000
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447316404
 CHIP     : MT65820000
 CPU ID   :
 EMMC ID  : 90014A483447316404
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H9TP32A8JDACPR_KGM
 Read Hardware Information is done.
 usb switching to high speed ...
 New Port: COM26   ......ok
 switch done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading ebr2 ......ok
 Downloading reserve2 ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Downloading fat ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:03:53
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
 
maanarman

maanarman

Friend's Martview
Dec 1, 2016
2,900
398
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
QMOBILE X30 WRITE FF DONE

Code: 
 Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM24 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_ID: 6572
 CPU_SW: 0000
 CPU_HW: CA01
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : TINNO
 Phone Model    : QMobile X30
 Android Ver    : 4.4.2
 CPU/Processor  : MT6572
 MTK Project ver: ALPS.KK1.MP7.V1
 SW Version     : ALPS.KK1.MP7.V1
 
 Action completed
 Time taken : 00:00:10
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.58.2
Code: 
 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM24 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_ID: 6572
 CPU_SW: 0000
 CPU_HW: CA01
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:05:07
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.58.2
 
maanarman

maanarman

Friend's Martview
Dec 1, 2016
2,900
398
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Qmobile X30 Write FF Done

Code: 
 Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM24 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_ID: 6572
 CPU_SW: 0000
 CPU_HW: CA01
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : TINNO
 Phone Model    : QMobile X30
 Android Ver    : 4.4.2
 CPU/Processor  : MT6572
 MTK Project ver: ALPS.KK1.MP7.V1
 SW Version     : ALPS.KK1.MP7.V1
 
 Action completed
 Time taken : 00:00:10
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.58.2
Code: 
 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM24 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_ID: 6572
 CPU_SW: 0000
 CPU_HW: CA01
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:03:17
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.58.2
 
maanarman

maanarman

Friend's Martview
Dec 1, 2016
2,900
398
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Rivo RX65 Write FF Done

Code: 
 Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM24 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_ID: 6582
 CPU_SW: 0001
 CPU_HW: CB00
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447316404
 CHIP     : MT65820000
 CPU ID   :
 EMMC ID  : 90014A483447316404
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H9TP32A8JDACPR_KGM
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : RHYTHM
 Phone Model    : RHYTHM RX65
 Android Ver    : 4.4.2
 CPU/Processor  : MT6582
 MTK Project ver: RIVO_RHYTHM_RX65_S003
 SW Version     : RIVO_RHYTHM_RX65_S003
 
 Action completed
 Time taken : 00:00:08
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.58.2
Code: 
 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM24 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_ID: 6582
 CPU_SW: 0001
 CPU_HW: CB00
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447316404
 CHIP     : MT65820000
 CPU ID   :
 EMMC ID  : 90014A483447316404
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H9TP32A8JDACPR_KGM
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:03:46
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.58.2
 
maanarman

maanarman

Friend's Martview
Dec 1, 2016
2,900
398
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Qmobile I6 Write FF Done


Code: 
 Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0001
 CPU_HW: CA01
 CPU_ID: 6582
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 1501004B3758564D42
 CHIP     : MT65820000
 CPU ID   :
 EMMC ID  : 1501004B3758564D42
 EMMC Size: 8GB,  usable capacity: 7.29GB
 EMMC Name: eMMC_Samsung_K7XVMB
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : QMobile
 Phone Model    : i6
 Android Ver    : 4.2.2
 CPU/Processor  : MT6582
 MTK Project ver: ALPS.JB5.MP.V1.6
 SW Version     : SV1.0
 Userdata State : Normal
 
 Action completed
 Time taken : 00:00:08
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
Code: 
 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0001
 CPU_HW: CA01
 CPU_ID: 6582
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 1501004B3758564D42
 CHIP     : MT65820000
 CPU ID   :
 EMMC ID  : 1501004B3758564D42
 EMMC Size: 8GB,  usable capacity: 7.29GB
 EMMC Name: eMMC_Samsung_K7XVMB
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading ebr2 ......ok
 Downloading spdata ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Downloading fat ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:05:54
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
 
maanarman

maanarman

Friend's Martview
Dec 1, 2016
2,900
398
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Qmobile X30 Write FF Done

Code: 
Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : TINNO
 Phone Model    : QMobile X30
 Android Ver    : 4.4.2
 CPU/Processor  : MT6572
 MTK Project ver: ALPS.KK1.MP7.V1
 SW Version     : ALPS.KK1.MP7.V1
 Userdata State : Normal
 
 Action completed
 Time taken : 00:00:11
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
Code: 
 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:03:09
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
 
maanarman

maanarman

Friend's Martview
Dec 1, 2016
2,900
398
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Qmobile I9 Write FF Done

Code: 
 Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0001
 CPU_HW: CA01
 CPU_ID: 6582
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 110100303034473930
 CHIP     : MT65820000
 CPU ID   :
 EMMC ID  : 110100303034473930
 EMMC Size: 4GB,  usable capacity: 3.69GB
 EMMC Name: eMMC_Toshiba_TYD0FH221618RA
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : QMobile
 Phone Model    : QMobile i9
 Android Ver    : 4.4.2
 CPU/Processor  : MT6582
 MTK Project ver: ALPS.KK1.MP1.V2.10
 SW Version     : ALPS.KK1.MP1.V2.10
 Userdata State : Normal
 
 Action completed
 Time taken : 00:00:09
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
Code: 
 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0001
 CPU_HW: CA01
 CPU_ID: 6582
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 110100303034473930
 CHIP     : MT65820000
 CPU ID   :
 EMMC ID  : 110100303034473930
 EMMC Size: 4GB,  usable capacity: 3.69GB
 EMMC Name: eMMC_Toshiba_TYD0FH221618RA
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:03:06
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
 
Status
Not open for further replies.
Top