CS-Tool - MTK[MediaTek] Phones Success Reports

Status
Not open for further replies.

CS TOOL

Junior Member
Dec 9, 2016
3
7
Hello,


Please post Successfully Report by CS-Tool here, This will help other users,







Br.,
CS-Tool
 
Last edited by a moderator:

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Qmobile X30 Write Flash With CS-TOOL

Code:
 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:03:09
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Qmobile I9 Write FF With CS-TOOL

Info

Code:
 Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM47 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0001
 CPU_HW: CA01
 CPU_ID: 6582
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 110100303034473930
 CHIP     : MT65820000
 CPU ID   :
 EMMC ID  : 110100303034473930
 EMMC Size: 4GB,  usable capacity: 3.69GB
 EMMC Name: eMMC_Toshiba_TYD0FH221618RA
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : QMobile
 Phone Model    : QMobile i9
 Android Ver    : 4.4.2
 CPU/Processor  : MT6582
 MTK Project ver: ALPS.KK1.MP1.V2.10
 SW Version     : ALPS.KK1.MP1.V2.10
 Userdata State : Normal
 
 Action completed
 Time taken : 00:00:07
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60

Write FF

Code:
 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM47 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0001
 CPU_HW: CA01
 CPU_ID: 6582
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 110100303034473930
 CHIP     : MT65820000
 CPU ID   :
 EMMC ID  : 110100303034473930
 EMMC Size: 4GB,  usable capacity: 3.69GB
 EMMC Name: eMMC_Toshiba_TYD0FH221618RA
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:03:14
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Lenovo A319 Invalid Imei Repair With Cs-Tool

Code:
 Action : Android Repair IMEI(DownloadBoot Mode)
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM140 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Read Hardware Information is done.
 
 Checking imei ...
 
 new imei1: 868414023862307
 new imei2: 868414024185500
 Repairing Imei...  Verify Required...
 Updating NVDATA...
 Checking CRC: NVRAM   ...ok
 all done ...
 
 Action completed
 Time taken : 00:00:12
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Qmobile X30 Write FF With Cs-Tool

Info

Code:
 Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : TINNO
 Phone Model    : QMobile X30
 Android Ver    : 4.4.2
 CPU/Processor  : MT6572
 MTK Project ver: ALPS.KK1.MP7.V1
 SW Version     : ALPS.KK1.MP7.V1
 Userdata State : Normal
 
 Action completed
 Time taken : 00:00:10
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60

Write FF

Code:
 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:02:56
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
Code:
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Lenovo A319 Write FF With Cs-tool

Info

Code:
Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : Lenovo
 Phone Model    : Lenovo A319
 Android Ver    : 4.4.2
 CPU/Processor  : MT6572
 MTK Project ver: A319_ROW_DS_S313_150427
 SW Version     : A319_ROW_DS_S313_150427
 Userdata State : Normal
 
 Action completed
 Time taken : 00:00:11
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60

Write FF

Code:
Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:04:00
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Qmobile X30 Write FF With Cs-Tool

Code:
 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM140 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:03:29
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Huawei Y511-u30 Write Flash done

Code:
 Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM6 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: FE
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 Warning: failed to init dram, loading default settings
 Waiting for DRAM detection...
 Selected: 3/7    ...
 Done. Size=0x0000000020000000
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447316404
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447316404
 EMMC Size: 4GB,  usable capacity: 3.61GB
 EMMC Name: eMMC_Hynix_H9TP32A8JDACPR_KGM
 Boot Information completed.

 Reading Project Property ...
 
 Brand          : HUAWEI
 Phone Model    : HUAWEI Y511-U30
 Android Ver    : 4.2.2
 CPU/Processor  : MT6572
 MTK Project ver: ALPS.JB3.MP.V1
 SW Version     : Y511-U30V100R001C328B120
 Userdata State : Normal
 
 Action completed
 Time taken : 00:00:25
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60

Write FF

Code:
 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM6 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: FE
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 Warning: failed to init dram, loading default settings
 Waiting for DRAM detection...
 Selected: 3/7    ...
 Done. Size=0x0000000020000000
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447316404
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447316404
 EMMC Size: 4GB,  usable capacity: 3.61GB
 EMMC Name: eMMC_Hynix_H9TP32A8JDACPR_KGM
 Read Hardware Information is done.
 usb switching to high speed ...
 New Port: COM26   ......ok
 switch done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Downloading fat ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:04:54
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Qmobile X30 Write Flash Done

Info

Code:
 Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : TINNO
 Phone Model    : QMobile X30
 Android Ver    : 4.4.2
 CPU/Processor  : MT6572
 MTK Project ver: ALPS.KK1.MP7.V1
 SW Version     : ALPS.KK1.MP7.V1
 Userdata State : Normal
 
 Action completed
 Time taken : 00:00:11
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60

Write Flash

Code:
 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:02:55
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Qmobile X30 Write FF Done

Code:
Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : TINNO
 Phone Model    : QMobile X30
 Android Ver    : 4.4.2
 CPU/Processor  : MT6572
 MTK Project ver: ALPS.KK1.MP7.V1
 SW Version     : ALPS.KK1.MP7.V1
 Userdata State : Normal
 
 Action completed
 Time taken : 00:00:16
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60

Code:
 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:03:51
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
QMOBILE X30 WRITE FLASH DONE
Code:
 Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : TINNO
 Phone Model    : QMobile X30
 Android Ver    : 4.4.2
 CPU/Processor  : MT6572
 MTK Project ver: ALPS.KK1.MP7.V1
 SW Version     : ALPS.KK1.MP7.V1
 Userdata State : Normal
 
 Action completed
 Time taken : 00:00:11
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60

WRI
Code:
 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:03:44
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
QMOBILE X11 WRITE FLASH

Code:
 Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447316404
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447316404
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H9TP32A8JDACPR_KGM
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : QMobile
 Phone Model    : QMobile X11
 Android Ver    : 4.4.2
 CPU/Processor  : MT6572
 MTK Project ver: ALPS.KK1.MP6.V1
 SW Version     : ALPS.KK1.MP6.V1
 Userdata State : Normal
 
 Action completed
 Time taken : 00:00:10
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60

Code:
 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447316404
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447316404
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H9TP32A8JDACPR_KGM
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:01:27
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
QMOBILE X30 WRITE FF DONE

Code:
 Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : TINNO
 Phone Model    : QMobile X30
 Android Ver    : 4.4.2
 CPU/Processor  : MT6572
 MTK Project ver: ALPS.KK1.MP7.V1
 SW Version     : ALPS.KK1.MP7.V1
 Userdata State : Normal
 
 Action completed
 Time taken : 00:00:10
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
Code:
 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:03:01
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Qmobile X30 Write Flash Done

Code:
 Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : TINNO
 Phone Model    : QMobile X30
 Android Ver    : 4.4.2
 CPU/Processor  : MT6572
 MTK Project ver: ALPS.KK1.MP7.V1
 SW Version     : ALPS.KK1.MP7.V1
 Userdata State : Normal
 
 Action completed
 Time taken : 00:00:10
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
Code:
 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:03:39
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Qmobile X6 Write Flash done

Code:
 Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM47 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA00
 CPU_ID: 6571
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447316404
 CHIP     : MT65710000
 CPU ID   :
 EMMC ID  : 90014A483447316404
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H9TP32A8JDACPR_KGM
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : QMobile
 Phone Model    : QMobile X6
 Android Ver    : 4.4.2
 CPU/Processor  : MT6571
 MTK Project ver: ALPS.KK1.MP7.V1
 SW Version     : ALPS.KK1.MP7.V1
 Userdata State : Normal
 
 Action completed
 Time taken : 00:00:11
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
Code:
 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA00
 CPU_ID: 6571
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447316404
 CHIP     : MT65710000
 CPU ID   :
 EMMC ID  : 90014A483447316404
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H9TP32A8JDACPR_KGM
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Downloading fat ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:01:47
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
QMOBILE X30 WRITE FLASH DONE

Code:
 Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM64 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_ID: 6572
 CPU_SW: 0000
 CPU_HW: CA01
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : TINNO
 Phone Model    : QMobile X30
 Android Ver    : 4.4.2
 CPU/Processor  : MT6572
 MTK Project ver: ALPS.KK1.MP7.V1
 SW Version     : ALPS.KK1.MP7.V1
 
 Action completed
 Time taken : 00:00:09
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.58.2
Code:
 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM64 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_ID: 6572
 CPU_SW: 0000
 CPU_HW: CA01
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:04:33
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.58.2
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Qmobile A290 Write Flash done

Code:
 Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447316404
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447316404
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H9TP32A8JDACPR_KGM
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : QMobile
 Phone Model    : QMobile A290
 Android Ver    : 4.4.2
 CPU/Processor  : MT6572
 MTK Project ver: ALPS.KK1.MP7.V1
 SW Version     : ALPS.KK1.MP7.V1
 Userdata State : Normal
 
 Action completed
 Time taken : 00:00:11
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
Code:
 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447316404
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447316404
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H9TP32A8JDACPR_KGM
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:02:32
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
CALL TOUCH C399 READ FF DONE

Code:
 Action : Read Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM10 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 8801034E4361726420
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 8801034E4361726420
 EMMC Size: 4GB,  usable capacity: 3.62GB
 EMMC Name: EMMC_Device_NCard
 Read Hardware Information is done.
 
 Reading Project Property ...
 done.
 Making dir: F:\temp cstool\\MT6572_alps_C399_Android4.4.2_M733W_V006_20140701_20180829_210158\...[ok]
 Reading preloader ......ok
 New EMI config is detected, auto added it to User Database, cnt=2
 Saved to: C:\CS-Tool\CST_MainSoftware\private\db\emi\
 Reading mbr ......ok
 Reading ebr1 ......ok
 Reading nvram ......ok
 Reading uboot ......ok
 Reading bootimg ......ok
 Reading recovery ......ok
 Reading sec_ro ......ok
 Reading logo ......ok
 Reading android ......ok
 Reading cache ......ok
 Reading usrdata ......ok
 Reading fat ......ok
 All done.
 Files saved to: F:\temp cstool\\MT6572_alps_C399_Android4.4.2_M733W_V006_20140701_20180829_210158\
 
 Action completed
 Time taken : 00:09:12
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
QMOBILE I9 WRITE FLASH DONE

Code:
 Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM64 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_ID: 6582
 CPU_SW: 0001
 CPU_HW: CA01
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 110100303034473930
 CHIP     : MT65820000
 CPU ID   :
 EMMC ID  : 110100303034473930
 EMMC Size: 4GB,  usable capacity: 3.69GB
 EMMC Name: eMMC_Toshiba_TYD0FH221618RA
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : QMobile
 Phone Model    : QMobile i9
 Android Ver    : 4.4.2
 CPU/Processor  : MT6582
 MTK Project ver: ALPS.KK1.MP1.V2.10
 SW Version     : ALPS.KK1.MP1.V2.10
 
 Action completed
 Time taken : 00:00:07
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.58.2
Code:
 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM64 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_ID: 6582
 CPU_SW: 0001
 CPU_HW: CA01
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 110100303034473930
 CHIP     : MT65820000
 CPU ID   :
 EMMC ID  : 110100303034473930
 EMMC Size: 4GB,  usable capacity: 3.69GB
 EMMC Name: eMMC_Toshiba_TYD0FH221618RA
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 New EMI config is detected, auto added it to User Database, cnt=2
 Saved to: C:\CS-Tool\CST_MainSoftware\private\db\emi\
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:02:58
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.58.2
 
Status
Not open for further replies.
Top