UMT ★★★ Post All Successfully Repaired Phones Ultimate Multi Tool ★★★

UMT Box

GsmToto

Super Moderator
Jan 1, 2021
5,322
22,087
UK
Skype
gsmtoto
Sonork ID
100.1684601
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Device in Firehose Mode Detected!
Detecting Storage Type...OK
Reading Partition Table...OK [120]
Reading Device Information...OK [Sign]
Build :
Int. Build :
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 11.4
 

GsmToto

Super Moderator
Jan 1, 2021
5,322
22,087
UK
Skype
gsmtoto
Sonork ID
100.1684601
Device : Samsung Galaxy S22 Ultra 5G (SM-S908U) BIT-7
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...Done
Protocol v3 or higher detected. Auto Loader unsupported.
Initializing Protocol...OK
Using Pre-Defined Loader [SM-S908U) BIT-7.ufl]
Preparing Loader...Done
Sending Loader [SM-S908U) BIT-7]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : , UFS, 256 GB
LU Count : 6 [0x03B6B400] [0x00000800] [0x00000800] [0x00000400] [0x00028000] [0x00001000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [98]
Reading Device Information...OK [Sign]
Build : S908U1UEU7EXK6
Int. Build : SM-S908U1_NA_XAA_QKEY0
Resetting FRP Lock...Done
Using Patch Method... Done Done
Operation Finished.
QcFire Ver. 11.5
 

GsmToto

Super Moderator
Jan 1, 2021
5,322
22,087
UK
Skype
gsmtoto
Sonork ID
100.1684601
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1F00B00 [8937] 00007200
OPK_DATA : 079E496E26A477B120DFCD85DFME4AD067164D8292DDD37993 0D5891E3D8240M
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_035]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Init EDL Auth...OK
Detecting Storage Type...OK
Hardware : 8937, EMMC, 32 GB
LU Count : 3 [0x03A3E000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [62]
Reading Device Information...OK
Device : Xiaomi
Software : , V12.5.2.0.QCPINXM [Sun Oct 10 09:51:06 CST 2021]
Android Ver. : 10
Patch Level : 2021-09-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 11.5
 

GsmToto

Super Moderator
Jan 1, 2021
5,322
22,087
UK
Skype
gsmtoto
Sonork ID
100.1684601
Device : Samsung Galaxy M52 5G (SM-M526B) BIT-5
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.8
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1201900 [SM7325] 00002000
OPK_DATA : 85FF968EF05E0F95EFAA758525D0CE08FDE124774EBF48B674 C658B88F13EA67
Initializing Protocol...OK
Using Pre-Defined Loader [SM-M526B BIT-5.ufl]
Preparing Loader...Done
Sending Loader [SM-M526B BIT-5]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SM7325, UFS, 128 GB
LU Count : 6 [0x01DA8C00] [0x00000800] [0x00000800] [0x00000400] [0x00020000] [0x00000800]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [77]
Reading Device Information...OK
Software : TP1A.221624.014.M526BXXS5CXE2, M516BXXS5CXE2 [Fri May 17 15:07:02 KST 2024]
Android Ver. : 13
Patch Level : 2024-05-01
Resetting FRP Lock...Failed
Using Patch Method... Done Done
Operation Finished.
QcFire Ver. 11.5
 

GsmToto

Super Moderator
Jan 1, 2021
5,322
22,087
UK
Skype
gsmtoto
Sonork ID
100.1684601
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1801B00 [SM6225] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7933886E38F2198FBDE6433FCE 1D25A7B0479DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6225_001]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Init EDL Auth...OK
Detecting Storage Type...OK
Hardware : SM6225, UFS, 128 GB
LU Count : 6 [0x01C45800] [0x00000800] [0x00000800] [0x00002000] [0x00180000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [94]
Reading Device Information...OK
Device : Xiaomi
Software : , V13.0.16.0.RGCMIXM [Tue Sep 6 11:58:38 CST 2022]
Android Ver. : 11
Patch Level : 2022-09-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 11.5
 

GsmToto

Super Moderator
Jan 1, 2021
5,322
22,087
UK
Skype
gsmtoto
Sonork ID
100.1684601
Phone Storage: EMMC
Job: Remove FRP
SELECTED: Autodetect by loader
ACTION: Erase FRP
Loader format:NEW
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM3)
Sending loader, keep boot key untill loader start.
Loader send OK
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
CPU NAME:
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\UMT\unisoc_module\spreadtrum_module_backup_fold er\Saved_Logs\_erase_frp_39.txt
Total Time: 00:01:56
Done.
 

GsmToto

Super Moderator
Jan 1, 2021
5,322
22,087
UK
Skype
gsmtoto
Sonork ID
100.1684601
ob: Remove FRP
SELECTED: Tiger T606
ACTION: Erase FRP
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM3)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 742607 [5e] 80C0785
UID: M2H741_16_15_5
FileSystem: EMMC
Read partition info is supported by loader.
CPU NAME: T606
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\UMT\unisoc_module\spreadtrum_module_backup_fold er\Saved_Logs\_erase_frp_41.txt
Total Time: 00:00:39
Done.
 

GsmToto

Super Moderator
Jan 1, 2021
5,322
22,087
UK
Skype
gsmtoto
Sonork ID
100.1684601
Device : Xiaomi Redmi S2
Operation : Reset Mi Account (New)
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Detecting Storage Type...Failed!

Auth Enabled Device! You need Mi Auth Account to service!
Init EDL Auth...OK
Detecting Chip Type...OK
Hardware : 8953, EMMC, 2 GB
LU Count : 3 [0x00000000] [0x00000000] [0x00000000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [57]
Reading Device Information...OK
Device : Xiaomi Redmi S2 [ysl]
Brand : xiaomi
Prod.Name : ysl
Software : PKQ1.181203.001, V12.0.2.0.PEFMIXM [Thu Sep 24 20:47:30 WIB 2020]
Android Ver. : 9
Patch Level : 2020-09-01
Reading Data[1]...Done
Patching Data...Done
Writing Data...Done
Reading Data[2]...Done
Patching Data...Done
Account : 6153902420
Phone : +59171***024
Display ID : 4TEU-HTCJ-RIME-RSG
Writing Data...Done
Operation Finished.
QcFire Ver. 11.6
 

GsmToto

Super Moderator
Jan 1, 2021
5,322
22,087
UK
Skype
gsmtoto
Sonork ID
100.1684601
Model : Samsung
Operation : FRP Bypass [2023 New Method]
Searching for Phone...Found
Hw ID : USB\VID_04E8&PID_6860&REV_0400&Modem
Port: : COM69 : SAMSUNG Mobile USB Modem #38
Checking for Device...Found [Normal Mode]
Reading Phone Information...OK
Model: : SM-A205G
IMEI: : 355686020240827
Software: : A205GUBUBCWD6/A205GOWOBCWD6/A205GNDXUBCWE1/A205GUBUBCWD6
Product : BVO
Enabling ADB (2023 New Method)...OK
Searching for Device...Found
Brand : samsung
Model : SM-A205G
Product : a20
Device : a20
Andriod Ver. : 11
Patch Level : 2023-03-01
PDA : A205GUBUBCWD6
Bootloader : A205GUBUBCWD6
Build ID : RP1A.200720.012.A205GUBUBCWD6
Build Date : Fri Apr 14 05:50:45 KST 2023
Checking Root Status...Done
Root : No Root
Resetting FRP Lock...Done
HINT : This method work for QC/Exynos model with Security Patch < June 2023
Elapsed Time 46:36
[UltimateSams v0.7]
 

GsmToto

Super Moderator
Jan 1, 2021
5,322
22,087
UK
Skype
gsmtoto
Sonork ID
100.1684601
Operation : Multi Flash
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM6)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1801B00 [SM6225] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE 1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6225_001]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Init EDL Auth...OK
Detecting Storage Type...OK
Hardware : SM6225, UFS, 128 GB
LU Count : 6 [0x01D46800] [0x00000800] [0x00000800] [0x00002000] [0x00080000] [0x00001000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [101]
Reading Device Information...OK [Sign]
Build :
Int. Build :
Processing [rawprogram0.xml]
Writing [persist.img] -> [persist] ...Done
Writing [cust.img ] -> [cust]...Done
Writing [super.img ] -> [super]...Done
Writing [vbmeta_system.img] -> [vbmeta_system_a] ...Done
Writing [vbmeta_system.img] -> [vbmeta_system_b] ...Done
Writing [metadata.img ] -> [metadata]...Done
Writing [rescue.img ] -> [rescue]...Done
Writing [userdata.img ] -> [userdata]...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram1.xml]
Writing [xbl.elf] -> [xbl_a] ...Done
Writing [xbl_config.elf] -> [xbl_config_a] ...Done
Writing [gpt_main1.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup1.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram2.xml]
Writing [xbl.elf] -> [xbl_b] ...Done
Writing [xbl_config.elf] -> [xbl_config_b] ...Done
Writing [gpt_main2.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup2.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram3.xml]
Writing [gpt_main3.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup3.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram4.xml]
Writing [rpm.mbn] -> [rpm_a] ...Done
Writing [tz.mbn] -> [tz_a] ...Done
Writing [hyp.mbn] -> [hyp_a] ...Done
Writing [NON-HLOS.bin] -> [modem_a] ...Done
Writing [BTFM.bin] -> [bluetooth_a] ...Done
Writing [abl.elf] -> [abl_a] ...Done
Writing [dspso.bin] -> [dsp_a] ...Done
Writing [keymint.mbn] -> [keymaster_a] ...Done
Writing [boot.img] -> [boot_a] ...Done
Writing [devcfg.mbn] -> [devcfg_a] ...Done
Writing [qupv3fw.elf] -> [qupfw_a] ...Done
Writing [vbmeta.img] -> [vbmeta_a] ...Done
Writing [dtbo.img] -> [dtbo_a] ...Done
Writing [imagefv.elf] -> [imagefv_a] ...Done
Writing [uefi_sec.mbn] -> [uefisecapp_a] ...Done
Writing [featenabler.mbn] -> [featenabler_a] ...Done
Writing [multi_image.mbn] -> [multiimgoem_a] ...Done
Writing [init_boot.img] -> [init_boot_a] ...Done
Writing [recovery.img] -> [recovery_a] ...Done
Writing [vendor_boot.img] -> [vendor_boot_a] ...Done
Writing [rpm.mbn] -> [rpm_b] ...Done
Writing [tz.mbn] -> [tz_b] ...Done
Writing [hyp.mbn] -> [hyp_b] ...Done
Writing [NON-HLOS.bin] -> [modem_b] ...Done
Writing [BTFM.bin] -> [bluetooth_b] ...Done
Writing [abl.elf] -> [abl_b] ...Done
Writing [dspso.bin] -> [dsp_b] ...Done
Writing [keymint.mbn] -> [keymaster_b] ...Done
Writing [boot.img] -> [boot_b] ...Done
Writing [devcfg.mbn] -> [devcfg_b] ...Done
Writing [qupv3fw.elf] -> [qupfw_b] ...Done
Writing [vbmeta.img] -> [vbmeta_b] ...Done
Writing [dtbo.img] -> [dtbo_b] ...Done
Writing [featenabler.mbn] -> [featenabler_b] ...Done
Writing [imagefv.elf] -> [imagefv_b] ...Done
Writing [uefi_sec.mbn] -> [uefisecapp_b] ...Done
Writing [multi_image.mbn] -> [multiimgoem_b] ...Done
Writing [logfs_ufs_8mb.bin] -> [logfs] ...Done
Writing [storsec.mbn] -> [storsec] ...Done
Writing [gpt_main4.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup4.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram5.xml]
Writing [gpt_main5.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup5.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Set Boottable Storage Drive to 1...Done
Reading Partition Table...OK [101]
Resetting FRP Lock.......Done
 

GsmToto

Super Moderator
Jan 1, 2021
5,322
22,087
UK
Skype
gsmtoto
Sonork ID
100.1684601
Brand : Samsung
Model : G925W8
Operation : FRP Reset (UART)
Searching for Phone...Found
Port: : COM206 : SAMSUNG Mobile USB Modem #29
Checking for Device...Found [Normal Mode]
Reading Phone Information...OK
Model: : SM-G925W8
IMEI: : 358758062295739
Software: : G925W8VLU6DVG1/G925W8OYA6DVG1/G925W8VLU6DVG1/G925W8VLU6DVG1
Product : RWC
Init Download Mode...OK
Waiting for phone in Download Mode...OK
Port: : COM2 : SAMSUNG Mobile USB Modem
Reading Data from Phone...Done
Chipset : LSI7420 [HiSpeed]
Waiting for user to select UART Port...
Port : COM205 : USB Serial Port (COM205)
Keep holding VOL DOWN + POWER button...Phone Found, LEAVE Buttons NOW!
Preparing Device...Done
Resetting FRP Data...Done
Resetting Samsung Account Data...Done
Resetting EE Data...Done
Operation Finished.
UltimateFRP Ver. 0.5
 

GsmToto

Super Moderator
Jan 1, 2021
5,322
22,087
UK
Skype
gsmtoto
Sonork ID
100.1684601
Device : Xiaomi Redmi 10C (fog)
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1801B00 [SM6225] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE 1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6225_001]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Init EDL Auth...
Detecting Storage Type...OK
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [94]
Reading Device Information...OK
Software : , V14.0.8.0.TGEMIXM [Wed Aug 28 10:38:50 UTC 2024]
Android Ver. : 13
Patch Level : 2024-09-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 11.7
 
Top