UMT ★★★ Post All Successfully Repaired Phones Ultimate Multi Tool ★★★

[SPYROS]

Model : Samsung
Operation : FRP Bypass [2023 New Method]
Searching for Phone...Found
Hw ID : USB\VID_04E8&PID_6860&REV_0400&Modem
Port: : COM13 : SAMSUNG Mobile USB Modem #4
Checking for Device...Found [Normal Mode]
Reading Phone Information...OK
Model: : SM-J260M
IMEI: : 351XXXXXXXXXXXX
Software: : J260MUBSDAUJ3/J260MOWODATL1/J260MUBSDAUJ3/J260MUBSDAUJ3
Product : TPA
Enabling ADB (2023 New Method)...OK
Searching for Device...Found
Brand : samsung
Model : SM-J260M
Product : j2corelte
Device : j2corelte
Andriod Ver. : 8.1.0
Patch Level : 2021-10-01
PDA : J260MUBSDAUJ3
Bootloader : J260MUBSDAUJ3
Build ID : M1AJB.J260MUBSDAUJ3
Build Date : Wed Oct 20 21:17:54 KST 2021
Checking Root Status...Done
Root : No Root
Resetting FRP Lock...Done
HINT : This method work for QC/Exynos model with Security Patch < June 2023
Elapsed Time 14:22
[UltimateSams v0.7]
Saved to Logs\241014_191422.log

 

[GsmToto]

Operation : Reset FRP
Searching for COM1.0 Device...Found!
COM235 : HUAWEI USB COM 1.0 (COM4)
Opening Port...OK
Platform : Kirin_980
Sending Loader...[1]..[2]..[3]..Done
Reading Partition Table...Done
Erasing FRP Data...Done
Hold power button to reboot device.
Operation Finished.
UltimateHST v0.2

 

[GsmToto]

USING PL_EXLOIT [INFINIX V1]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM2)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&237d5c64&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6761 [0717] Helio A20/P22/A22/A25/G25
Details : 8A00,CA01,0200
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 54855424F7C83BM7AFMB24E76DDA4AC8K
SoC ID[0] : F87385009C8C44AF646DANCF4C8F67M
SoC ID[1] : 2CA8AKB89D2R155E1CFAAB9C3DBF4C5H
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Int. RAM : 0x000000000003A600 [233,50 KB]
Ext. RAM : 0x0000000080000000 [2,00 GB]
Flash ID : TJ3032
CID : 700100544A333035B2010F0135EC598M
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000000400000 [4,00 MB]
USERAREA : 0x0000000748000000 [29,13 GB]
PRE EOL : NORMAL
Life. Est.A : 20%-30% LIFE TIME USED
Life. Est.B : 30%-40% LIFE TIME USED
Reading Partition Table...OK
And. Ver. : 11
Build Dt. : Tue Oct 17 10:22:09 CST 2023
Display ID : TECNO-RGo-32-231016V117
Ver. Inc. : 231017V426
Locale : en-US
Patch : 2023-10-05
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.5]
Log Saved : 20897555_097865.log

 

[GsmToto]

peration : Reset FRP (Sideload)
Searching for phone in sideload mode...Found
Device Id : muikds_bhimfs
Version : V12.5.2.0.RCOMIXM
Code Base : 11
Serial : 0x96737c28
Ext Info : US, es, F, 2, 2
Model : Redmi Note 8
Reading Partition Table...[44] OK
Resetting FRP...Done
Operation Finished.
QcFire Ver. 11.0

 

[GsmToto]

aiting for server.....OK
Waiting For Device Connection.....OK
USB PORT: SPRD U2S Diag (COM5)
Port: SPRD U2S Diag (COM5)
OPEN COM PORT......OK
Handshake...OK
Enter Diag Mode......OK
Waiting For Device Connection......OK
USB PORT: (COM5)
OPEN COM PORT......OK
Handshake...OK
Read Device Info......OK
Platform Version:MOCORTM_20A_W22.43.5_Debug
Project Version:sharkl5pro_pub
BASE Version:4G_MODEM_20A_W22.43.5
HW Version:sharkl5pro_modem
10-28-2022 04:04
Ap Version:S19610AA1_ctcc-user 11 RP1A.201005.001 17119 release-keys
Search Userdata Partition......OK
Format Userdata Partition......OK
Operation {Factory Reset} ID: 2F375E8EF1295944
Elapsed time 00:37 -- Version 4.8.5 Release 005 Build 373

 

[bronce]

redmi k40 gaming

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset Mi Account
BOOT CFG : [BROM EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek USB Port_V1633 (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&13110a19&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6893 [0950] Dimensity 1200
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 0912398370F8F09344490F7B65EEE1E5
SoC ID[0] : A329380804C39E1FD8D2951E3D1481F5
SoC ID[1] : 59B42871A2663ED3AA5F9FEFBDDB5C65
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_ares.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : CE014B4C55444734554844432D423045 [UFS]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : KLUDG4UHDC-B0E
CID : CE014B4C55444734554844432D423045
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000001DCB000000 [119.17 GB]
PRE EOL : NORMAL
Life. Est.A : 10%-20% LIFE TIME USED
Life. Est.B : 10%-20% LIFE TIME USED
Reading Partition Table...OK
And. Ver. : 13
Build Dt. : Tue Oct 10 14:06:50 UTC 2023
Display ID : TP1A.220624.014
Ver. Inc. : V14.0.5.0.TKJINXM
Locale : en-GB
Patch : 2023-10-01
Bootloader : UNLOCKED
Reading Data...OK
Backup : Persist_unknown_20241021_145100.zip
Resetting Mi Account Data...GET_PACKET_LEN Error!Failed!
Operation Finished.
[UltimateMTK2 v1.5]
Log Saved : 20241021_145108.log

 

[bronce]

Redmi 7A [pine]

Operation : Flash
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM7)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1F00B00 [8937] 00007200
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_035]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Init EDL Auth...OK
Detecting Storage Type...OK
Hardware : 8937, EMMC, 32 GB
LU Count : 3 [0x03A3E000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [60]
Reading Device Information...OK
Device : Xiaomi Redmi 7A [pine]
Brand : Xiaomi
Prod.Name : pine
Software : ZQL1533-pine-build-20190604232925, V10.2.6.0.PCMCNXM [Tue Jun 4 23:31:25 CST 2019]
Android Ver. : 9
Patch Level : 2019-05-01
Writing [sec.dat] -> [sec] ...Done
Writing [vbmeta.img] -> [vbmeta] ...Done
Writing [vbmeta.img] -> [vbmetabak] ...Done
Writing [devcfg.mbn] -> [devcfg] ...Done
Writing [devcfg.mbn] -> [devcfgbak] ...Done
Writing [dummy.img] -> [apdp] ...Done
Writing [dummy.img] -> [msadp] ...Done
Writing [sbl1.mbn] -> [sbl1] ...Done
Writing [sbl1.mbn] -> [sbl1bak] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [rpm.mbn] -> [rpmbak] ...Done
Writing [cmnlib_30.mbn] -> [cmnlib] ...Done
Writing [cmnlib_30.mbn] -> [cmnlibbak] ...Done
Writing [cmnlib64_30.mbn] -> [cmnlib64] ...Done
Writing [cmnlib64_30.mbn] -> [cmnlib64bak] ...Done
Writing [km4.mbn] -> [keymaster] ...Done
Writing [km4.mbn] -> [keymasterbak] ...Done
Writing [misc.img] -> [misc] ...Done
Writing [emmc_appsboot.mbn] -> [aboot] ...Done
Writing [emmc_appsboot.mbn] -> [abootbak] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [tz.mbn] -> [tzbak] ...Done
Writing [dtbo.img] -> [dtbo] ...Done
Writing [dtbo.img] -> [dtbobak] ...Done
Writing [splash.img] -> [splash] ...Done
Writing [adspso.bin] -> [dsp] ...Done
Writing [adspso.bin] -> [dspbak] ...Done
Writing [persist.img] -> [persist] ...Done
Writing [mdtp.img] -> [mdtp] ...Done
Writing [mdtp.img] -> [mdtpbak] ...Done
Writing [boot.img] -> [boot] ...Done
Writing [recovery.img] -> [recovery] ...Done
Writing [cache.img ] -> [cache]...Done
Writing [NON-HLOS.bin] -> [modem] ...Done
Writing [system.img ] -> [system]...Done
Writing [vendor.img ] -> [vendor]...Done
Writing [cust.img ] -> [cust]...Done
Writing [userdata.img ] -> [userdata]...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Set Boottable Storage Drive to 0...Done
Reading Partition Table...OK [60]
Resetting FRP Lock......Done
Resetting device...Done
Operation Finished.
QcFire Ver. 11.0

 

[GsmToto]

Job: Remove FRP
SELECTED: SC9863A
ACTION: Erase FRP
Start Detect phone.
Phone must be off(you can service this phone without battery also).
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM5)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 121B8F8F [5e] 912925
UID: TBTR93_14_31_15
FileSystem: EMMC
Read partition info is supported by loader.
***************
[S]Manufacturer: ZTE
[S]Brand: ZTE
[S]Device: P963F60
[S]Model: ZTE Blade A51
Build ID: RP1A.201005.001
CPU arhitecture: armeabi-v7a
Build product name: s9863a1h10_go_32b
Build description: s9863a1h10_go_32b_2g-user 11 RP1A.201005.001 20211027.050032 release-keys
Product name: P963F60
SW Version: GEN_LA_P963F60V1.0.0B09
Board: s9863a1h10_go_32b
Build Id: RP1A.201005.001
Android Release: 11
Android Version: GEN_LA_A51_V1.3
Security patch: 2021-10-05
CPU NAME: SC9863A
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\UMT\unisoc_module\spreadtrum_module_backup_fold er\Saved_Logs\ZTE_ZTE_Blade_A51_GEN_LA_A51_V1_3_er ase_frp.txt
Total Time: 00:00:57
Done.

 

[GsmToto]

Operation : Reset FRP (Sideload)
Searching for phone in sideload mode...Found
Device Id : curtana_eea_global
Version : V12.5.6.0.RJWEUXX
Code Base : 11
Serial : 0xf5df7cbb
Ext Info : ES, es, F, 2, 2
Model : Redmi Note 9S
Reading Partition Table...[90] OK
Resetting FRP...Done
Operation Finished.
QcFire Ver. 11.0

 

[bronce]

Brand : AJJ
Model : NS5517

Operation : Reset FRP
BOOT CFG : [BROM EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek USB Port_V1633 (COM5)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&13110a19&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6735 [0321] MT6735/T,MT8735A
Details : 8A00,CA00,0000
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
MEID : 07D5E51FADE6D4FB86E34442845BF82A
Running Exploit...Done
Downloading Preloader..OK
Saved as : preloader_len6737t_36_m0.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using DA : MTK_AllInOne_DA.bin
Sending 1st DA...OK
Jump DA Address...OK
Initiazling Storage..OK
DRAM : 150100524331424D42014D9BC67F9F53 [eMMC]
Syncing...OK [04029B]
Sending BMT Config...OK
DRAM : 150100524331424D42014D9BC67F9F53
Configuring DRAM...0xA574OK
Sending 2nd DA..OK
Reading Storage Info..OK
Int. RAM : 0x0000000000020000 [128.00 KB]
Ext. RAM : 0x00000000C0000000 [3.00 GB]
eMMC ID : MB1C›
CID : 8F800000520001154D4231439B4D0142
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
Reading Partition Table...OK
Brand : AJJ
Manuf. : AJJ
Model : NS5517
Platform : mt6737t
Device : NS5517
And. Ver. : 6.0
Prod. Name : NS5517
Build Dt. : Wed May 15 21:31:08 CST 2019
Display ID : MEIGUHW3V
Ver. Inc. : 1557926695
Locale : zh-CN
Patch : 2017-04-05
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.5]
Log Saved : 20241027_160939.log

 

[GsmToto]

[*]==> Operation : RAMDISK-ERASE[*]==> Reading Device Infos [ DFU Mode ]
CPID : 0X8000
ECID : 0X0003387B5F35B4662
PWND: CHECKM3
MODE: DFU
PRODUCT : iPhone8,2
MODEL : n66ap[*]==> Device : iPhone6sPlus(iPhone8,2 n66ap)[*]==> Device is in PWNDFU Mode: CHECKM8[*]==> Preparing DATA.....
Will use: RAMDISK_1_iPhone8,2-n66ap-15.zip
Processing ramdisk, wait....
Ramdisk Name: iPhone8,2-n66ap
==> Sending Boot Stage 1 <== OK
==> Sending Boot Stage 2 <== OK
==> Sending Boot Stage 3 <== OK
==> Setting Boot Args
Wait untill phone will reboot and finish erase.
If phone reboot without erase, phone not accept ramdisk file or wrong pwn.
Exe version: UMT iOS Ramdisk Activator V4.2

 

[GsmToto]

Nokia C31 TA-1493 After Safe Format userdata Hang on logo problem
phone restart on first logo
Log after formate

Job: Boot Info
SELECTED: Nokia C31
[0]ACTION: Boot Info
Start Detect phone.
Phone must be off(you can service this phone without battery also).
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM4)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 642C726 [5e] 91B764
UID: TKMT38_11_14_38
FileSystem: EMMC
Read partition info is supported by loader.
***************
Manufacturer: HMD Global
Brand: Nokia
Device: VSI
Model: Nokia C31
Build ID: SP1A.210812.016
CPU arhitecture: arm64-v8a
Build product name: T19681AA1
Build description: T19681AA1_Natv-user 12 SP1A.210812.016 00WW_1_230 release-keys
Build Id: SP1A.210812.016
Android Release: 12
Android Version: 00WW_1_230
Security patch: 2023-05-05
CPU NAME: SC9863A
SN: 333101046300xxxx
Found [l_fixnv1_a] [l_fixnv1_a] Size to download: 2 MB
Reading: l_fixnv1_a 200000
Length: 100000 chk: 9788 calculated chk: 9788 calculated chk_32: 9789
IMEI 1: 35693892083892
IMEI 2: 35693892083892
IMEI 3: 86740002030203
IMEI 4: 86740002030203
Simlock Type: 4

Simlock Status:
SIMLOCK: INACTIVE
NETWORK SUBNET: INACTIVE
SP LOCK: INACTIVE
CORPORATE: INACTIVE
USER LOCK: INACTIVE
[4]Simlock Type: 0 0
Phone have empty sign array, can be empty efuse or erased nv.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\UMT\unisoc_module\spreadtrum_module_backup_fold er\Saved_Logs\Nokia_00WW_1_230_boot_info.txt
Total Time: 00:00:39
Done.

 

[GsmToto]

​

USING PL_EXLOIT [VIVO V1]
Brand/Model : Auto / Auto Detect
Operation : Safe Format+FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM22)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&f2fa762&0&3
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.2.0.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : A2BDFE416676E390B04377E10B210622
SoC ID[0] : 2B543A979D79AF59FEE72368D1B5C95E
SoC ID[1] : 0DA32BE415BDB25F8778091D9C0734AE
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Int. RAM : 0x000000000003A000 [232.00 KB]
Ext. RAM : 0x00000000C0000000 [3.00 GB]
Flash ID : GP6BMB
CID : 150100475036424D42018A81D0558581
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
PRE EOL : NORMAL
Life. Est.A : LIFE TIME USAGE EXCEED
Life. Est.B : LIFE TIME USAGE EXCEED
Reading Partition Table...OK
Brand : vivo
Manuf. : vivo
Model : vivo 1815
Device : PD1818CF_EX
And. Ver. : 8.1.0
Prod. Ver. : PD1818CF_EX_A_1.13.3
Prod. Name : PD1818CF_EX
Build Dt. : Mon Mar 27 15:29:00 CST 2023
Display ID : O11019 release-keys
Ver. Inc. : 1679902148
Locale : en-US
Patch : 2021-05-01
Bootloader : LOCKED
Executing Safe Format...Done
If phone stuck on recovery, try [Fix Recovery].
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.5]
Log Saved : 20241107_192240.log

 

[GsmToto]

SAMSUNG A057F FRP SUCCESS;
Device : Samsung Galaxy A05s (SM-A057F) BIT2
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM2)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1801B00 [SM6225] 00002000
OPK_DATA : FE7A96F970CD7BD084E89403B54 C5B4506C905ECDCE54D0256497B57539B3E3C
Initializing Protocol...OK
Using Pre-Defined Loader [SM-A057F_BIT2.ufl]
Preparing Loader...Done
Sending Loader [SM-A057F_BIT2]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SM6225, UFS, 64 GB
LU Count : 6 [0x00EC3400] [0x00000800] [0x00000800] [0x00000400] [0x00020000] [0x00000800]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [81]
Reading Device Information...OK [Sign]
Build : A057FXXU2BXA8
Int. Build : SM-A057F_SEA_XXV_QKEY0
Resetting FRP Lock.......Done
Operation Finished.

 

[GsmToto]

CPU : MT6797
Storage : EMMC
Scatter : C:\Users\quantum\Desktop\MT6797_Meizu_PRO_6_6.0_Fl yme_6.3.0.0G_MRA58K_PRO6\MT6797_Meizu_PRO_6_6.0_Fl yme_6.3.0.0G_MRA58K_PRO6\MT6797_Android_scatter.tx t
DA Version : MTK_AllInOne_DA_v3.3001.09/05/2021.11:40
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM3 [MediaTek USB Port (COM37)]
Device Path: \\?\usb#vid_0e8d&pid_0003#5&2f245085&0&1#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0279, [MT6797/MT6767] [Helio X23/X25/X27]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: True] [DA Auth: True]
MEID: C7C3CF5098F42D6B1C4E7D47EEF8823F
Preparing device...
-- Success!
Waiting for Phone in Flash Mode...
Connect Power Off phone now...
Port : MediaTek USB Port (COM7)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connecting to HighSpeed Port...
Waiting for HighSpeed Port..
Port : MediaTek DA USB VCOM (Android) (COM15)
device path: \\?\usb#vid_0e8d&pid_2001#5&1e4121f5&0&7#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Connected to Download Agent..
Executing Flashing Task...
[0] WRITE TO PARTITION [ preloader ]
Flashing Bootloader...
[2] WRITE TO PARTITION [ recovery ]
Flashing Firmware...
[4] WRITE TO PARTITION [ custom ]
[17] WRITE TO PARTITION [ md1img ]
[18] WRITE TO PARTITION [ md1dsp ]
[19] WRITE TO PARTITION [ md1arm7 ]
[20] WRITE TO PARTITION [ md3img ]
[21] WRITE TO PARTITION [ scp1 ]
[22] WRITE TO PARTITION [ scp2 ]
[24] WRITE TO PARTITION [ lk ]
[25] WRITE TO PARTITION [ lk2 ]
[26] WRITE TO PARTITION [ boot ]
[27] WRITE TO PARTITION [ logo ]
[28] WRITE TO PARTITION [ tee1 ]
[29] WRITE TO PARTITION [ tee2 ]
[31] WRITE TO PARTITION [ system ]
[32] WRITE TO PARTITION [ cache ]
[33] WRITE TO PARTITION [ userdata ]
Flashing Done.
Disconnect cable and Power ON phone

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Permanent Unlock
BOOT CFG : [BROM EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek USB Port_V1633 (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0403#5&66d5342&0&3#{a5dcbf10-6530-11d2-901f-00c44fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 38678D7FA23DE6EC4F064A9A6DB7057D
SoC ID[0] : 28F64D5591F305D0A19364DA8924393U
SoC ID[1] : F09157C148444314A5A46FC03AD7120F
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_earth.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 9B010059302A1E4EFD897D0533132380D [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
HRID : 2014C510082AC2C819E5E28C234A253M
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : Y0S128
CID : 9B0100593053313238002A1E4EFD897D
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000001D1F000000 [116.48 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Reading Bootloader Data...OK
Bootloader : LOCKED
Unlocking Bootloader...OK
Setting Permanent Unlock...Failed!
Operation Finished.
[UltimateMTK2 v1.6]

 

[GsmToto]

USING PL_EXLOIT [INFINIX V3]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&390692d&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1511.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 8B6841C952B7C036760CEA22CEE4423A
SoC ID[0] : D6FD0F31D143CD9088340E3CB77B8A0C
SoC ID[1] : 36731A707CC21A21AADC3DB8EEA861BC
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
HRID : 98AB1A6C034C6A3E1C501725818D1A9E
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : AKJ41X
CID : F40122414B4A3431581442B8341EBA83
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000003A40000000 [233.00 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.6]
Log Saved : 20795244_198640.log

 

[GsmToto]

Job: Remove FRP
SELECTED: Tiger T606 Ver2
ACTION: Erase FRP
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SCI USB2Serial (COM2)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 743902 [5e] 101E4418
UID: M3T283_25_8_24
FileSystem: EMMC
Read partition info is supported by loader.
CPU NAME: T606
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\UMT\unisoc_module\spreadtrum_module_backup_fold er\Saved_Logs\_erase_frp_10.txt
Total Time: 00:00:37
Done.

 

[GsmToto]

Port : COM3 : Qualcomm HS-USB Android DIAG 901D (COM3)
Baud Rate : 921600
Device : QC Universal
Operation : Direct Unlock
Opening Port... OK
Reading Information... OK
Compile : Jun 3 2014 20:24:24
Release : Apr 17 2014 15:00:00
Hw Ver. : AAAFMNSZ
IMEI : 0140876467987654
Reading Personalization Data... OK
Saving Data Backup... OK
Found Code Set
NCK : 24157593 Unlocked
NSCK : 35122695 Unlocked
CCK : 63183095 Unlocked
SPCK : 95826668 Unlocked
SIM : 02492667 Unlocked
Executing Direct Unlock... OK
Port Closed.
Operation Finished.
Elapsed Time: 00:08
[Module Ver. 4.1]
Log Saved to Logs\1684533_167640.log

 

[GsmToto]

Device : Samsung Galaxy S21 FE 5G (SM-G990B) BIT-A
Operation : Samsung Lost Mode Reset
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1501300 [SM8350] 00002000
OPK_DATA : F8A3638KD48716865314E6A2C6EX0BFA28C18E8DDB395H209C 4AEC684D21588M
Initializing Protocol...OK
Using Pre-Defined Loader [SM-G990B_BIT-A.ufl]
Preparing Loader...Done
Sending Loader [SM-G990B_BIT-A]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SM8350, UFS, 128 GB
LU Count : 6 [0x01DA8C00] [0x00000800] [0x00000800] [0x00000400] [0x00020000] [0x00000800]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [79]
Reading Device Information...OK
Software : UP1A.231005.007.G990BXXS9GXI8, G990BXXS9GXI8 [Thu Aug 29 08:33:26 UTC 2024]
Android Ver. : 14
Patch Level : 2024-09-01
Resetting Lost Mode... Done Done Done
Once phone reboot in Odin Mode, full flash your device.
If stuck on Charging Logo, hold VOL DOWN + PWR for 5 Seconds.
Operation Finished.
QcFire Ver. 11.1