Free Motorola Nougat 2017 FRP Reset

[KHAN JAN]

Nice ...... work Admin (y)
جزاک اللہ

 

[abdul4u1992]

its 100% working thanks A lot bro....!!

 

[gsmaamir]

allhamduliallah nice work....keep it up gsm marhaba ....

 

[janardhan]

Can any one share the frp unlock solution of moto g4 plus 7.0 December patch


Sent from my iPhone using GsmMarhaba

 

[krishna95420]

super boss its working

 

[SalihJan]

Brother,
The Factory Mode cannot be selected: it blinks and says Device is Locked Status Code 2. Nothing happens. My phone is Google Motorola Nexus 6. Can I proceed if the factory mode cnnot be started?
Jazakullah khayr... بارك الله فيك

 

[SalihJan]

Brother,
The Factory Mode cannot be selected: it blinks and says Device is Locked Status Code 2. Nothing happens. My phone is Google Motorola Nexus 6. Can I proceed if the factory mode cnnot be started?
Jazakullah khayr... بارك الله فيك

I tried to proceed, but the computer does not recognize the phone and does not assign a port.

 

[Shoukat Ali Zahid]

Factory mode failed Device is Locked Status Code 2.

 

[SalihJan]

Factory mode failed Device is Locked Status Code 2.

Mine gave exactly the same message. I guess they patched that loophole

 

[hamdullahksk]

thanks 100% working................thanks thanks

 

[hafiz4saqib]

1st Watch Full video then try again after successful job must share this post to every where

Salam!
Even I have same issue same like as other
I can`t enter "Factory Mode"
I already tried both method but there is no luck for me ....
Check the picture ............

 

[srimanta]

THANK YOU SIR YOU ARE REALLY GOOD WORK

 

[Ahmyking]

Motorola Nougat FRP Reset Pack GsmMarhaba
1. Install "MotoService"
2. After "MotoService" installation, Don't Run Just Close it
3. Install MotoServiceOptions
4. Install minimal_adb_fastboot_v1.1.3
5. Open "MotoService" Normally and minimize Login menus.
6. Turn the Mobile off and then on again in "FASTBOOT" mode (POWER +
VOLUME -), select "FACTORY MODE" and press Power.
Computer:
7. Open the "MotoService" program, go to "Options" - "Port Setup", see if the
On the display, the device will select the number you wish to place.
Press "Assing", and "Done"
8. In the "MotoService" Menu select "Power Test", done this on the device port will appear
Again "Tower Test" press this option again, after this will open a window and
Press "Yes"
9. After complete Remove your handset and switch it back on FACTORY MODE and connect to the computer,
This will enable the option to Enable USB debugging check the option and ok.

10. ADB Commands:
Put These Command:
adb devices
adb shell content insert --uri content://settings/secure --bind name:s:user_setup_complete --bind value:s:1

If Above Command not Working Then Try This Command:
adb shell am start -n com.google.android.gsf.login/

If Above Command not Working Then Try This Command:
adb shell am start -n com.google.android.gsf.login.LoginActivity

11. Restart you Phone. it will be unlocked Done....!!

Please login to view image

sir .. kia ya version 6.0.1 ya 5.1 pa work kry ga ?????/////

 

[eradik8r]

moto z force. doesn't recognize a connection.

 

[Shoukat Ali Zahid]

Salam!
Even I have same issue same like as other
I can`t enter "Factory Mode"
I already tried both method but there is no luck for me ....
Check the picture ............

Please login to view image

Same problem Admin and bro jameel any update for this?

 

[janardhan]

Try to use another pc or laptop


Sent from my iPhone using GsmMarhaba

 

[rana shahzad]

thanks you are good work thanks brother

 

[Bilal Khan]

great work. and please upload solution for more latest frp like nexus 6 security patch level 1april2017 which don't allow factorymode

Sent From SM-G5510 Using GsmMarhaba App

 

[Bilal Khan]

Please login to view image

Motorola Nougat FRP Reset Pack GsmMarhaba
1. Install "MotoService"
2. After "MotoService" installation, Don't Run Just Close it
3. Install MotoServiceOptions
4. Install minimal_adb_fastboot_v1.1.3
5. Open "MotoService" Normally and minimize Login menus.
6. Turn the Mobile off and then on again in "FASTBOOT" mode (POWER +
VOLUME -), select "FACTORY MODE" and press Power.
Computer:
7. Open the "MotoService" program, go to "Options" - "Port Setup", see if the
On the display, the device will select the number you wish to place.
Press "Assing", and "Done"
8. In the "MotoService" Menu select "Power Test", done this on the device port will appear
Again "Tower Test" press this option again, after this will open a window and
Press "Yes"
9. After complete Remove your handset and switch it back on FACTORY MODE and connect to the computer,
This will enable the option to Enable USB debugging check the option and ok.

10. ADB Commands:
Put These Command:
adb devices
adb shell content insert --uri content://settings/secure --bind name:s:user_setup_complete --bind value:s:1

If Above Command not Working Then Try This Command:
adb shell am start -n com.google.android.gsf.login/

If Above Command not Working Then Try This Command:
adb shell am start -n com.google.android.gsf.login.LoginActivity

11. Restart you Phone. it will be unlocked Done....!!

Please login to view image

great work. and please upload solution for more latest frp like nexus 6 security patch level 1april2017 which don't allow factorymode

Sent From SM-G5510 Using GsmMarhaba App

 

[gogogo]

Very good job man !