dany_boy
Friend's Martview
Pandora team we need new MTK model support. already meny tool work on Samsung qualcom. please give us MTK update or SPD update
Z3X Pandora PRO 7.6 / 7.7 Released. New devices/functions added.
- Thread starter SPYROS
- Start date
Z3X Team
need infinix techno itel september security solution
Pandora PRO 7.6 / 7.7 Released. New devices/functions added.
- Updated algo selecting/searching EDL loaders
- Added support for Honor phones:
Honor MagicPad 13 GDI-W09D/GDI-W09F/GDI-W09
Honor Pad 8 HEY-W09
Honor Pad X8a NDL-W09
Honor X8 TFY-LX1/TFY-LX2/TFY-LX3
Honor X9 4G ANY-LX1/ANY-LX2/ANY-LX3
Honor X30 ANY-AN00
Honor X9 5G ANY-NX1/ANY-NX2
Honor Play 40 WDY-AN00
Honor 70 Lite RBN-NX1
Honor X8a 5G RBN-NX3
Honor 50 Lite NTN-L22/NTN-L22D/NTN-LX1/NTN-LX3
Honor 60 LSA-AN00
Honor Pad X9 ELN-L03/ELN-L09/ELN-W09
Honor Magic 4 LGE-AN00
Honor Magic 4 Pro LGE-AN10
Honor Magic 4 Ultimate LGE-AN20
Honor Magic 4 Pro LGE-N19B/LGE-N49B/LGE-NX9
Honor Magic V MGI-AN00
- Added support for Huawei phones:
Huawei Nova 8i NEN-L22
Huawei MatePad SE 10.4 AGS5-AL00/AGS5-L09/AGS5-W00/AGS5-W09
Huawei Enjoy 70S GFY-AL00
Huawei Enjoy 60X STG-AL00
Huawei Nova Y91 STG-LX1/STG-LX2
Hi Nova 9z MNT-BD00
Huawei P50E ABR-AL60/ABR-AL60W/ABR-AL90
Hi Nova 10 ALH-BD00
Huawei MediaPad 10.4 2022 BAH4-AL10/BAH4-W19
Huawei Pocket S BAL-AL60
Huawei Pocket S BAL-AL80/BAL-AL80A
Huawei Nova 10z CHA-AL80
Huawei Nova 12 Lite FIN-AL60/FIN-AL60A
Huawei Nova 10 Pro GLA-AL00
Huawei Nova 10 Pro GLA-L21/GLA-L23/GLA-LX1/GLA-LX3
Huawei Nova 11 Pro GOA-AL80
Huawei Nova 11 Ultra GOA-AL80U
Huawei Nova 11 Pro GOA-L89/GOA-LX9
Hi Nova 9 Pro Hebe-BD00
Hi Nova 9 Hera-BD00
Hi Nova 11 MIZ-BD00
Huawei Nova 9 NAM-AL00/NAM-LX9
Huawei Nova 10 NCO-AL00/NCO-L21/NCO-LX1/NCO-LX3
Huawei Nova 9 Pro RTE-AL00
Huawei Mate 50E CET-AL60
Huawei MatePad Pro 11 GOT-AL09/GOT-AL19/GOT-W09
Huawei P50 ABR-AL00/ABR-AL80
Huawei P50 Pocket BAL-AL00/BAL-AL00A/BAL-L49
Huawei MatePad Air DBY2-AL00/DBY2-L09/DBY2-L09CK/DBY2-W00/DBY2-W09
Huawei MatePad Air DBY2Z-AL00
Huawei P50 Pro JAD-AL00
Huawei Mate X3 ALT-AL00/ALT-L29
- Added support for Samsung QCOM phones (EDL mode):
SM-A025M Galaxy A02s
SM-A207M Galaxy A20s
SM-A6060 Galaxy A60
SM-F741N Galaxy Z Flip6 5G
SM-F741U Galaxy Z Flip6 5G
SM-F9560 Galaxy Z Fold6
SM-G977U Galaxy S10 5G
SM-G981V Galaxy S20 5G
SM-G981W Galaxy S20 5G
SM-G990B2 Galaxy S21 FE 5G
SM-G990U2 Galaxy S21 FE 5G
SM-M556M Galaxy M55 5G
SM-S9060 Galaxy S22 Plus
SM-S9160 Galaxy S23 Plus
SM-S9260 Galaxy S24 Plus
- Added new loader for:
SM-F926B BIT 8
SM-A528B BIT 9
SM-A715F BIT B
SM-G780G BIT C
SM-G973U BIT 9
SM-N976U BIT 6
SM-S916N BIT 4
- Added support for QCOM based phones (EDL mode):
TCL 20 5G T781 T781H T781K
TCL 10 Plus T782P
TCL 30 V 5G T781S
TCL Plex T780H
TCL 20 SE T671H, T671F, T671O, T671E
OnePlus Nord N200 5G DE2118
- Added support for Mediatek based phones:
TCL 10 SE T766A/T766H/T766J/T766S/T766U
TCL 30 SE 6165D
Wiko Tommy 3 W-C200 W-C200SN
Alcatel 3L (2020) 5029D 5029F
- Added support for Unisoc based phones:
SC9832E
Safaricom Neon Smarta, Neon Smarta 2, Neon Smarta M
Enova N10
SC9863A:
Vortex A24
Teclast P10, P10 HD, P20, P20HD, P80
T606:
Teclast P40HD, T45HD, T50
T610
Teclast M40 Pro
T612
Teclast M50
Itel S23 Plus S681LN
T616
TECNO Spark Go 2024 BG6m
Teclast M50 Pro, T40 Air
ZTE Axon 60 Lite Z2350
T700
Teclast M40, M40S, T40
------------------------------------------------------------
Pandora PRO 7.7 Released.
Fixed "Detecting memory type... error(1.1.1)"
- Added New and Refactoring Old Xiaomi Patch Cert Algos
- Now for Patch Cert use "Repair" button and check/select under "Advanced settings" "Auto Patch Cert"
- Added new loader for:
SM-A235M BIT 8
SM-F711B BIT A
SM-F711U BIT 8
SM-F721B BIT 8
SM-G965U BIT 9
SM-G988N BIT 6
SM-G990B BIT A
SM-G990B2 BIT 9
SM-M145F BIT 5
SM-M515F BIT 6
SM-N950U BIT 8
SM-N960U BIT 9
SM-T505 BIT 7
SM-T595 BIT 4
SM-A707F BIT 3
SM-M405F BIT 2
SM-T505N BIT 7
Download 7.7 Link : 166.15 MB file on MEGA
Download Link : 166.93 MB file on MEGA
Selected model: Xiaomi Redmi Note 10S (Rosemary)
Operation: Repair
Software version: 7.7
Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0813
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6785]
Install LibUSB... OK
Waiting for device... OK
Open port... OK
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0813
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6785]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xD168A066, 0x9322D460, 0x8A98DCFC, 0xE01743D4
Get Chip ID... [MT6785]
Get SOC ID... [E5A966049B122224301FAF2B52D370A6EFA 5A7DA018FE1FE3D8FDA9C776A86EC]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [12]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
UFS CID (FW VER): H9HQ15AECMBDAR (A043)
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : H9HQ15AECMBDAR
UFS_FWVER : A043
BLOCK_SIZE: 0x0000001000 (4.00Kb)
UFS_LU0 : 0x0000400000 (4.00Mb)
UFS_LU1 : 0x0000400000 (4.00Mb)
UFS_LU2 : 0x1DCAC00000 (119.17Gb)
RAM INFO:
INT_SRAM: 0x0000080000 (512.00Kb)
EXT_RAM : 0x0180000000 (6.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : Redmi
Product Manufacturer : Xiaomi
Product Model : rosemary
Product Name : rosemary
Product Device : rosemary
Product Board : rosemary
Board Platform : mt6785
Build ID : RP1A.200720.011
Build Date : Thu Jan 13 23:59:26 CST 2022
Display ID : RP1A.200720.011
Security Patch : 2022-01-01
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : V12.5.15.0.RKLMIXM
Userdata FS Type : F2FS
Read partition "nvdata"... OK
Read partition "protect1"... OK
Read partition "nvram"... OK
Read NVDATA files... OK
Read NVRAM files... OK
Read security files... OK
Calculating... OK
Read IMEI... error
Repairing IMEI...
IMEI 1: 35
IMEI 2: 35
Write IMEI and patch CERT [NVDATA]... OK
Load partiton for patching... [Nov 2024] ... error(3.1)
Operation: Repair
Software version: 7.7
Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0813
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6785]
Install LibUSB... OK
Waiting for device... OK
Open port... OK
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0813
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6785]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xD168A066, 0x9322D460, 0x8A98DCFC, 0xE01743D4
Get Chip ID... [MT6785]
Get SOC ID... [E5A966049B122224301FAF2B52D370A6EFA 5A7DA018FE1FE3D8FDA9C776A86EC]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [12]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
UFS CID (FW VER): H9HQ15AECMBDAR (A043)
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : H9HQ15AECMBDAR
UFS_FWVER : A043
BLOCK_SIZE: 0x0000001000 (4.00Kb)
UFS_LU0 : 0x0000400000 (4.00Mb)
UFS_LU1 : 0x0000400000 (4.00Mb)
UFS_LU2 : 0x1DCAC00000 (119.17Gb)
RAM INFO:
INT_SRAM: 0x0000080000 (512.00Kb)
EXT_RAM : 0x0180000000 (6.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : Redmi
Product Manufacturer : Xiaomi
Product Model : rosemary
Product Name : rosemary
Product Device : rosemary
Product Board : rosemary
Board Platform : mt6785
Build ID : RP1A.200720.011
Build Date : Thu Jan 13 23:59:26 CST 2022
Display ID : RP1A.200720.011
Security Patch : 2022-01-01
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : V12.5.15.0.RKLMIXM
Userdata FS Type : F2FS
Read partition "nvdata"... OK
Read partition "protect1"... OK
Read partition "nvram"... OK
Read NVDATA files... OK
Read NVRAM files... OK
Read security files... OK
Calculating... OK
Read IMEI... error
Repairing IMEI...
IMEI 1: 35
IMEI 2: 35
Write IMEI and patch CERT [NVDATA]... OK
Load partiton for patching... [Nov 2024] ... error(3.1)
elected model: Samsung SM-A715F (Galaxy A71)
Operation: Erase FRP And Wipe
Software version: 7.7
BITB or less is supported by EDL loader
Waiting for device... OK
Device found at COM3
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 1149133568
Sahara ver: 2
OEM PK HASH: B696E20250A209DE1EB3BD0D6ECB2CD9A818443BC249C0AEB5 DE2B7B4D3DB615254207AF297D70B332EDA0FA2CCD588F
CPU: SM7150 (Snapdragon 732G)
Vendor: Samsung
MSM HW ID: 000E60E100200000
SBL SW Ver: 00000000
Prepare loader file... OK
Loader hash: 1C4F76B10620E172414563914A5F7691452D043A
Loader PK hash: B696E20250A209DE1EB3BD0D6ECB2CD9A818443BC249C0AEB5 DE2B7B4D3DB61525420A07AF297D70B332EDFA2CCD588F
Loader version: 6.5
Sending loader... OK
FireHose initialization... OK
Detecting memory type... OK [UFS]
Get storage info... OK
Storage info:
Type: UFS
Name: MT128GA4U219L0007SAO
Page size: 1000
Block size: 1000
Partition count: 4
LU0 size: 0x1DC5C00000
LU1 size: 0x0000800000
LU2 size: 0x0000800000
LU3 size: 0x0003C00000
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... OK
Serial Number : RZ8NZM9H80V
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-A715F
Product Name : a71naxx
Product Device : a71
Product Board : sm6150
Board Platform : sm6150
Build ID : RP1A.200720.012
Build Date : Thu Feb 29 13:48:10 +07 2024
Display ID : TP1A.220624.014.A715FXBDXB1XS
Security Patch : 2024-02-01
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : A715FXBDXB1XS
Userdata FS Type : F2FS
Erase FRP... OK
Formatting "userdata" partition... OK
Creating default filesystem [F2FS]... OK
Formatting "cache" partition... OK
Creating default filesystem [EXT4]... OK
Formatting "metadata" partition... OK
Done!
Operation: Erase FRP And Wipe
Software version: 7.7
BITB or less is supported by EDL loader
Waiting for device... OK
Device found at COM3
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 1149133568
Sahara ver: 2
OEM PK HASH: B696E20250A209DE1EB3BD0D6ECB2CD9A818443BC249C0AEB5 DE2B7B4D3DB615254207AF297D70B332EDA0FA2CCD588F
CPU: SM7150 (Snapdragon 732G)
Vendor: Samsung
MSM HW ID: 000E60E100200000
SBL SW Ver: 00000000
Prepare loader file... OK
Loader hash: 1C4F76B10620E172414563914A5F7691452D043A
Loader PK hash: B696E20250A209DE1EB3BD0D6ECB2CD9A818443BC249C0AEB5 DE2B7B4D3DB61525420A07AF297D70B332EDFA2CCD588F
Loader version: 6.5
Sending loader... OK
FireHose initialization... OK
Detecting memory type... OK [UFS]
Get storage info... OK
Storage info:
Type: UFS
Name: MT128GA4U219L0007SAO
Page size: 1000
Block size: 1000
Partition count: 4
LU0 size: 0x1DC5C00000
LU1 size: 0x0000800000
LU2 size: 0x0000800000
LU3 size: 0x0003C00000
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... OK
Serial Number : RZ8NZM9H80V
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-A715F
Product Name : a71naxx
Product Device : a71
Product Board : sm6150
Board Platform : sm6150
Build ID : RP1A.200720.012
Build Date : Thu Feb 29 13:48:10 +07 2024
Display ID : TP1A.220624.014.A715FXBDXB1XS
Security Patch : 2024-02-01
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : A715FXBDXB1XS
Userdata FS Type : F2FS
Erase FRP... OK
Formatting "userdata" partition... OK
Creating default filesystem [F2FS]... OK
Formatting "cache" partition... OK
Creating default filesystem [EXT4]... OK
Formatting "metadata" partition... OK
Done!
Selected model: ZTE Z2350 (Axon 60 Lite)
Operation: Repair
Software version: 7.7
Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to NONE... OK
Connect phone to [PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM2
Port: USB\VID_1782&PID_4D00\5&35AC891C&0&2
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T616_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: YJMPO2288D116731
Flash Type: EMMC
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : ZTE
Product Manufacturer : ZTE
Product Model : Z2350
Product Name : P606F10_2
Product Device : P606F10
Product Board : ums9230_1h10
Board Platform : ums9230
Build ID : TP1A.220624.014
Build Date : Fri Oct 18 00:07:15 CST 2024
Display ID : MyOS13.0.4_Z2350_TEL
Security Patch : 2024-10-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 20241017.223586
Userdata FS Type : F2FS
Load NVD... OK
Read IMEI... OK
Current IMEI:
IMEI 1: 865830458107011
IMEI 2: 867400662002031
Repaired IMEI:
IMEI 1: 523234223863458
Write IMEI... OK
Save NVD... OK
Done!
Operation: Repair
Software version: 7.7
Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to NONE... OK
Connect phone to [PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM2
Port: USB\VID_1782&PID_4D00\5&35AC891C&0&2
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T616_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: YJMPO2288D116731
Flash Type: EMMC
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : ZTE
Product Manufacturer : ZTE
Product Model : Z2350
Product Name : P606F10_2
Product Device : P606F10
Product Board : ums9230_1h10
Board Platform : ums9230
Build ID : TP1A.220624.014
Build Date : Fri Oct 18 00:07:15 CST 2024
Display ID : MyOS13.0.4_Z2350_TEL
Security Patch : 2024-10-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 20241017.223586
Userdata FS Type : F2FS
Load NVD... OK
Read IMEI... OK
Current IMEI:
IMEI 1: 865830458107011
IMEI 2: 867400662002031
Repaired IMEI:
IMEI 1: 523234223863458
Write IMEI... OK
Save NVD... OK
Done!
FAKE Update Pandora Box
Selected model: Huawei MIZ-BD00 (Hi Nova 11)
Operation: Read Flash Info
Software version: 7.7
Waiting for device... OK
Device found at COM93
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 2143855633
Sahara ver: 2
OEM PK HASH: 38C76EC919C4F6A7D702C0319E6E9C00FCF624F5B6427E3C881643596313F57B6345D0E4A7C7E9A647068BCD1957F685
CPU: SM7325 (Snapdragon 778G 5G)
Vendor: 0180
MSM HW ID: 001920E101800636
SBL SW Ver: 00000000
Prepare loader file... OK
Loader hash: B214561BD4ED7D5F1F4797F375573A60C837607B
Loader PK hash: 38C76EC919C4F6A7D702C0319E6E9C00FCF624F5B6427E3C881643596313F57B6345D0E4A7C7E9A647068BCD1957F685
Loader version: 6.5
Sending loader... error(4.1)
Selected model: Huawei MIZ-BD00 (Hi Nova 11)
Operation: Read Flash Info
Software version: 7.7
Waiting for device... OK
Device found at COM93
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 2143855633
Sahara ver: 2
OEM PK HASH: 38C76EC919C4F6A7D702C0319E6E9C00FCF624F5B6427E3C881643596313F57B6345D0E4A7C7E9A647068BCD1957F685
CPU: SM7325 (Snapdragon 778G 5G)
Vendor: 0180
MSM HW ID: 001920E101800636
SBL SW Ver: 00000000
Prepare loader file... OK
Loader hash: B214561BD4ED7D5F1F4797F375573A60C837607B
Loader PK hash: 38C76EC919C4F6A7D702C0319E6E9C00FCF624F5B6427E3C881643596313F57B6345D0E4A7C7E9A647068BCD1957F685
Loader version: 6.5
Sending loader... error(4.1)
No more attempts to blind new PC until 12/07/24
I was made a mistake
after windows upgrade it's not blinding.
plz help me sir.
it's my username - PND_eVP7h8sU
I was made a mistake
after windows upgrade it's not blinding.
plz help me sir.
it's my username - PND_eVP7h8sU
Selected model: OPPO Mediatek
Operation: Reset password
Software version: 7.7
This procedure will erase all downloaded apps and their data.
Photos, music, and other non-app will be retained. Continue? YES
Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xCCFA4A59, 0xF296DE21, 0xA054007C, 0xB97E7107
Get Chip ID... [MT6765]
Get SOC ID... [DA6E09DD0DBB37EE2A2D48B46D60485F62EF F8AC3304975E09AA876DFC651D6E]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100420189629AE31681474436424D
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: GD6BMB
EMMC_ID : 0x1501004420189629AE3168174436424D
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x00C0000000 (3.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 70% - 80% device life time used
DeviceLifeTimeEstB: 70% - 80% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : OPPO
Product Manufacturer : OPPO
Product Model : CPH1909
Product Name : CPH1909
Product Device : CPH1909
Board Platform : mt6765
Build ID : O11019
Build Date : Fri Mar 19 19:50:28 CST 2021
Display ID : CPH1909EX_11_A.46
Security Patch : 2021-04-05
Version SDK : 27
Version Release : 8.1.0
Version Codename : REL
Firmware Version : 1616154627
Userdata FS Type : EXT4
Read info from phone... OK
Processing data #1... OK
Reset Password done!
Operation: Reset password
Software version: 7.7
This procedure will erase all downloaded apps and their data.
Photos, music, and other non-app will be retained. Continue? YES
Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xCCFA4A59, 0xF296DE21, 0xA054007C, 0xB97E7107
Get Chip ID... [MT6765]
Get SOC ID... [DA6E09DD0DBB37EE2A2D48B46D60485F62EF F8AC3304975E09AA876DFC651D6E]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100420189629AE31681474436424D
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: GD6BMB
EMMC_ID : 0x1501004420189629AE3168174436424D
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x00C0000000 (3.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 70% - 80% device life time used
DeviceLifeTimeEstB: 70% - 80% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : OPPO
Product Manufacturer : OPPO
Product Model : CPH1909
Product Name : CPH1909
Product Device : CPH1909
Board Platform : mt6765
Build ID : O11019
Build Date : Fri Mar 19 19:50:28 CST 2021
Display ID : CPH1909EX_11_A.46
Security Patch : 2021-04-05
Version SDK : 27
Version Release : 8.1.0
Version Codename : REL
Firmware Version : 1616154627
Userdata FS Type : EXT4
Read info from phone... OK
Processing data #1... OK
Reset Password done!
elected model: OPPO CPH2387 (Oppo A57 4G)
Operation: Flash (Format all + download)
Software version: 7.7
Work ID: 50740533
Parse scatter file... OK
Load Rom Images... OK
Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x98B06749, 0x268830EF, 0xDDD3EBCE, 0x7A2475AC
Get Chip ID... [MT6765]
Get SOC ID... [A19028926571EB66569A7A8F607F6D42D75570665A9E87 734A60CA1921F36F3A]
Get sec config... OK [00000000]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100434EAFC61731FA4E423452066D
Load EMI config from preloader... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: CJNB4R
EMMC_ID : 0x150100434EAFC61731FA4E423452066D
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 10% - 20% device life time used
DeviceLifeTimeEstB: 10% - 20% device life time used
Get scatter info... OK
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : OPPO
Product Manufacturer : OPPO
Product Model : CPH2387
Product Name : CPH2387T2
Product Device : OP5355
Product Board : k65v1_64_bsp
Board Platform : mt6765
Build ID : SP1A.210812.016
Build Date : Thu Jun 30 13:04:19 CST 2022
Display ID : CPH2387_11_A.99
Security Patch : 2022-06-05
Version Release : 12
Firmware Version : S.202207011058
Userdata FS Type : F2FS
Creating autoformat settings... OK
Format "EMMC_BOOT_1" partition( 0x00000000..0x003FFFFF )... OK
Format "EMMC_BOOT_2" partition( 0x00000000..0x003FFFFF )... OK
Format "EMMC_USER" partition( 0x00000000..0xE8F7FFFFF )... OK
Get scatter info... OK
Verify scatter file... OK
Do NAND BMT remark... OK
Setup download info... OK
Get partition table catagory... OK [GPT]
Read mirror partition table... OK
Generate mirror partition table... OK
Downloading mirror partition table... OK
Read major partition table... OK
Generate major partition table... OK
Downloading major partition table... OK
Download "preloader"... OK "preloder_backup"... OK
Download "oplusreserve2"... OK
Download "oplus_custom"... OK
Download "logo"... OK
Download "md1img_a"... OK
Download "spmfw_a"... OK
Download "scp_a"... OK
Download "sspm_a"... OK
Download "gz_a"... OK
Download "lk_a"... OK
Download "boot_a"... OK
Download "dtbo_a"... OK
Download "tee_a"... OK
Download "vbmeta_a"... OK
Download "vbmeta_system_a"... OK
Download "vbmeta_vendor_a"... OK
Download "cdt_engineering_a"... OK
Download "cdt_engineering_b"... OK
Download "super"... OK
Download "userdata"... OK
Flashing done!
Operation: Flash (Format all + download)
Software version: 7.7
Work ID: 50740533
Parse scatter file... OK
Load Rom Images... OK
Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x98B06749, 0x268830EF, 0xDDD3EBCE, 0x7A2475AC
Get Chip ID... [MT6765]
Get SOC ID... [A19028926571EB66569A7A8F607F6D42D75570665A9E87 734A60CA1921F36F3A]
Get sec config... OK [00000000]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100434EAFC61731FA4E423452066D
Load EMI config from preloader... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: CJNB4R
EMMC_ID : 0x150100434EAFC61731FA4E423452066D
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 10% - 20% device life time used
DeviceLifeTimeEstB: 10% - 20% device life time used
Get scatter info... OK
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : OPPO
Product Manufacturer : OPPO
Product Model : CPH2387
Product Name : CPH2387T2
Product Device : OP5355
Product Board : k65v1_64_bsp
Board Platform : mt6765
Build ID : SP1A.210812.016
Build Date : Thu Jun 30 13:04:19 CST 2022
Display ID : CPH2387_11_A.99
Security Patch : 2022-06-05
Version Release : 12
Firmware Version : S.202207011058
Userdata FS Type : F2FS
Creating autoformat settings... OK
Format "EMMC_BOOT_1" partition( 0x00000000..0x003FFFFF )... OK
Format "EMMC_BOOT_2" partition( 0x00000000..0x003FFFFF )... OK
Format "EMMC_USER" partition( 0x00000000..0xE8F7FFFFF )... OK
Get scatter info... OK
Verify scatter file... OK
Do NAND BMT remark... OK
Setup download info... OK
Get partition table catagory... OK [GPT]
Read mirror partition table... OK
Generate mirror partition table... OK
Downloading mirror partition table... OK
Read major partition table... OK
Generate major partition table... OK
Downloading major partition table... OK
Download "preloader"... OK "preloder_backup"... OK
Download "oplusreserve2"... OK
Download "oplus_custom"... OK
Download "logo"... OK
Download "md1img_a"... OK
Download "spmfw_a"... OK
Download "scp_a"... OK
Download "sspm_a"... OK
Download "gz_a"... OK
Download "lk_a"... OK
Download "boot_a"... OK
Download "dtbo_a"... OK
Download "tee_a"... OK
Download "vbmeta_a"... OK
Download "vbmeta_system_a"... OK
Download "vbmeta_vendor_a"... OK
Download "cdt_engineering_a"... OK
Download "cdt_engineering_b"... OK
Download "super"... OK
Download "userdata"... OK
Flashing done!
Selected model: Infinix Mediatek
Operation: Erase FRP
Software version: 7.7
Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x26331B79, 0x156197E4, 0xA6C84F4C, 0x22EB00F5
Get Chip ID... [MT6765]
Get SOC ID... [C43005C17C2D568BFAM728FF05G14D100BA95B56N1C67581B5 0707687772976M]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x15010044503E40E5783644414203850E
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DP6DAB
EMMC_ID : 0x15010044503E40E5783644414203850E
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 10% - 20% device life time used
DeviceLifeTimeEstB: 10% - 20% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : Infinix
Product Manufacturer : INFINIX MOBILITY LIMITED
Product Model : Infinix X680B
Product Name : X680B-OP
Product Device : Infinix-X680B
Product Board : Infinix-X680B
Board Platform : mt6765
Build ID : QP1A.190711.020
Build Date : Thu May 5 10:47:18 CST 2022
Display ID : X680B-H6215EFIJ-Q-OP-220505V281
Security Patch : 2022-04-05
Version SDK : 29
Version Release : 10
Version Codename : REL
Firmware Version : EFIJ-OP-220505V281
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Infinix_MT6765/FRP_BACKUP_(2024-11-17_20-44-43)/
Format FRP... [P1] OK
Writting FRP data... OK
Fix TOOL DL Image error... OK
Erase FRP done!
Operation: Erase FRP
Software version: 7.7
Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x26331B79, 0x156197E4, 0xA6C84F4C, 0x22EB00F5
Get Chip ID... [MT6765]
Get SOC ID... [C43005C17C2D568BFAM728FF05G14D100BA95B56N1C67581B5 0707687772976M]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x15010044503E40E5783644414203850E
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DP6DAB
EMMC_ID : 0x15010044503E40E5783644414203850E
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 10% - 20% device life time used
DeviceLifeTimeEstB: 10% - 20% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : Infinix
Product Manufacturer : INFINIX MOBILITY LIMITED
Product Model : Infinix X680B
Product Name : X680B-OP
Product Device : Infinix-X680B
Product Board : Infinix-X680B
Board Platform : mt6765
Build ID : QP1A.190711.020
Build Date : Thu May 5 10:47:18 CST 2022
Display ID : X680B-H6215EFIJ-Q-OP-220505V281
Security Patch : 2022-04-05
Version SDK : 29
Version Release : 10
Version Codename : REL
Firmware Version : EFIJ-OP-220505V281
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Infinix_MT6765/FRP_BACKUP_(2024-11-17_20-44-43)/
Format FRP... [P1] OK
Writting FRP data... OK
Fix TOOL DL Image error... OK
Erase FRP done!
ed model: Wiko W-V800 (Wiko View 3 Lite)
Operation: Erase FRP And Wipe
Software version: 7.7
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM3
Port: USB\VID_1782&PID_4D00\6&299&0&18C69D
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: SC9863A
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: JAD41923275007
Read partitions info... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : WIKO
Product Manufacturer : WIKO
Product Model : W-V800-EEA
Product Name : W-V800-EEA
Product Device : W-V800
Product Board : v800
Board Platform : sp9863a
Build ID : PPR1.180610.011
Build Date : Fri Jun 21 18:24:59 CST 2019
Display ID : PPR1.180610.011 release-keys
Security Patch : 2019-06-05
Version SDK : 28
Version Release : 9
Version Codename : REL
Firmware Version : 08016
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... not found, skip
Creating default filesystems... [CACHE: EXT4] ... [USERDATA: F2FS] ... OK
Done!
Operation: Erase FRP And Wipe
Software version: 7.7
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM3
Port: USB\VID_1782&PID_4D00\6&299&0&18C69D
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: SC9863A
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: JAD41923275007
Read partitions info... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : WIKO
Product Manufacturer : WIKO
Product Model : W-V800-EEA
Product Name : W-V800-EEA
Product Device : W-V800
Product Board : v800
Board Platform : sp9863a
Build ID : PPR1.180610.011
Build Date : Fri Jun 21 18:24:59 CST 2019
Display ID : PPR1.180610.011 release-keys
Security Patch : 2019-06-05
Version SDK : 28
Version Release : 9
Version Codename : REL
Firmware Version : 08016
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... not found, skip
Creating default filesystems... [CACHE: EXT4] ... [USERDATA: F2FS] ... OK
Done!
lected model: Vivo PD1901 (Vivo Y12)
Operation: Erase FRP
Software version: 7.7
Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM4 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xD7EF4249, 0xB2F63C1M, 0x0C42BE8M, 0xC128F75M
Load DownloadAgent... OK
Search DA... OK [2]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [7]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: RP64MB
EMMC_ID : 0x15010042012483682D2729525036344D
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: Exceeded its maximum estimated device life time
DeviceLifeTimeEstB: Exceeded its maximum estimated device life time
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : vivo
Product Manufacturer : vivo
Product Model : vivo 1901
Product Name : 1901
Product Device : 1901
Product Board : k62v1_64_bsp
Board Platform : MTK6765
Build ID : RP1A.200720.012
Build Date : Wed Mar 22 11:25:23 CST 2023
Display ID : RP1A.200720.012 release-keys
Security Patch : 2022-05-01
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : eng.compil.20230322.112912
Userdata FS Type : EXT4
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Vivo_PD1901%20(Vivo%20Y12)/FRP_BACKUP_(2024-11-18_14-13-31)/
Format FRP... [P1] OK
Writting FRP data... OK
Erase FRP done!
Operation: Erase FRP
Software version: 7.7
Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM4 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xD7EF4249, 0xB2F63C1M, 0x0C42BE8M, 0xC128F75M
Load DownloadAgent... OK
Search DA... OK [2]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [7]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: RP64MB
EMMC_ID : 0x15010042012483682D2729525036344D
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: Exceeded its maximum estimated device life time
DeviceLifeTimeEstB: Exceeded its maximum estimated device life time
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : vivo
Product Manufacturer : vivo
Product Model : vivo 1901
Product Name : 1901
Product Device : 1901
Product Board : k62v1_64_bsp
Board Platform : MTK6765
Build ID : RP1A.200720.012
Build Date : Wed Mar 22 11:25:23 CST 2023
Display ID : RP1A.200720.012 release-keys
Security Patch : 2022-05-01
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : eng.compil.20230322.112912
Userdata FS Type : EXT4
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Vivo_PD1901%20(Vivo%20Y12)/FRP_BACKUP_(2024-11-18_14-13-31)/
Format FRP... [P1] OK
Writting FRP data... OK
Erase FRP done!
Selected model: Honor LGE-NX9 (Honor Magic 4 Pro)
Operation: Read Flash Info
Software version: 7.7
Work ID: 50289207
Waiting for device... OK
Device found at COM18
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 1263880231
Sahara ver: 3
OEM PK HASH: 17CC4A85FE411B14A3CEBC65C729B423ABAF55DF12FDC1BC49FE102660B614C5B265EA64EF2EB77FE88BF575B0B4001E
CPU: 00000000
Vendor: Qualcomm
Prepare loader file... OK
Loader hash: 55F70EFA7DCB44A0C1DD386A4D7FDC159B198C5F
Loader PK hash: 17CC4A85FE411B14A3CEBC65C729B423ABAF55DF12FDC1BC49FE102660B614C5B265EA64EF2EB77FE88BF575B0B4001E
Loader version: 7.0
Sending loader... OK
FireHose initialization... error(2.1)
Operation: Read Flash Info
Software version: 7.7
Work ID: 50289207
Waiting for device... OK
Device found at COM18
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 1263880231
Sahara ver: 3
OEM PK HASH: 17CC4A85FE411B14A3CEBC65C729B423ABAF55DF12FDC1BC49FE102660B614C5B265EA64EF2EB77FE88BF575B0B4001E
CPU: 00000000
Vendor: Qualcomm
Prepare loader file... OK
Loader hash: 55F70EFA7DCB44A0C1DD386A4D7FDC159B198C5F
Loader PK hash: 17CC4A85FE411B14A3CEBC65C729B423ABAF55DF12FDC1BC49FE102660B614C5B265EA64EF2EB77FE88BF575B0B4001E
Loader version: 7.0
Sending loader... OK
FireHose initialization... error(2.1)
Selected model: Tecno KL4 (Tecno Spark Go 1)
Operation: Repair
Software version: 7.7
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM7
Port: USB\VID_1782&PID_4D00\5&5114092&0&2
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T616_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 1291437487002048
Flash Type: EMMC
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO
Product Model : TECNO KL4
Product Name : KL4-OPPJ
Product Device : TECNO-KL4
Product Board : TECNO-KL4
Board Platform : ums9230
Build ID : TP1A.220624.014
Build Date : Fri Sep 27 15:19:01 CST 2024
Display ID : KL4-F201JKLW-UGo-OPPJ-PJ-240927V242
Security Patch : 2024-09-05
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : 240927V242
Userdata FS Type : F2FS
Load NVD... OK
Read IMEI... OK
Current IMEI:
IMEI 1: 355030523150305
IMEI 2: 355030523150305
Repaired IMEI:
IMEI 1: 35XXXXXXXXXXXX
IMEI 2: 35XXXXXXXXXXXX
Write IMEI... OK
Save NVD... OK
Repair SN... OK
Done!
Operation: Repair
Software version: 7.7
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM7
Port: USB\VID_1782&PID_4D00\5&5114092&0&2
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T616_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 1291437487002048
Flash Type: EMMC
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO
Product Model : TECNO KL4
Product Name : KL4-OPPJ
Product Device : TECNO-KL4
Product Board : TECNO-KL4
Board Platform : ums9230
Build ID : TP1A.220624.014
Build Date : Fri Sep 27 15:19:01 CST 2024
Display ID : KL4-F201JKLW-UGo-OPPJ-PJ-240927V242
Security Patch : 2024-09-05
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : 240927V242
Userdata FS Type : F2FS
Load NVD... OK
Read IMEI... OK
Current IMEI:
IMEI 1: 355030523150305
IMEI 2: 355030523150305
Repaired IMEI:
IMEI 1: 35XXXXXXXXXXXX
IMEI 2: 35XXXXXXXXXXXX
Write IMEI... OK
Save NVD... OK
Repair SN... OK
Done!
elected model: Vivo PD1917F (Vivo Y90)
Operation: Reset password
Software version: 7.7
This procedure will erase all downloaded apps and their data.
Photos, music, and other non-app will be retained. Continue? YES
Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM4 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x641625A4, 0x2B2164DA, 0x37E35B20, 0x0D28196B
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [5]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: QD63MB
EMMC_ID : 0x1501004201D258C67BA607514436334D
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: Exceeded its maximum estimated device life time
DeviceLifeTimeEstB: Exceeded its maximum estimated device life time
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : vivo
Product Manufacturer : vivo
Product Model : vivo 1812
Product Name : PD1917F_EX
Product Device : PD1917F_EX
Board Platform : MTK6761
Build ID : O11019
Build Date : Sun Jun 26 02:40:44 CST 2022
Display ID : O11019 release-keys
Security Patch : 2021-04-01
Version SDK : 27
Version Release : 8.1.0
Version Codename : REL
Firmware Version : 1656176732
Userdata FS Type : EXT4
Read info from phone... OK
Processing data #1... OK
Reset Password done!
Operation: Reset password
Software version: 7.7
This procedure will erase all downloaded apps and their data.
Photos, music, and other non-app will be retained. Continue? YES
Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM4 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x641625A4, 0x2B2164DA, 0x37E35B20, 0x0D28196B
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [5]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: QD63MB
EMMC_ID : 0x1501004201D258C67BA607514436334D
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: Exceeded its maximum estimated device life time
DeviceLifeTimeEstB: Exceeded its maximum estimated device life time
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : vivo
Product Manufacturer : vivo
Product Model : vivo 1812
Product Name : PD1917F_EX
Product Device : PD1917F_EX
Board Platform : MTK6761
Build ID : O11019
Build Date : Sun Jun 26 02:40:44 CST 2022
Display ID : O11019 release-keys
Security Patch : 2021-04-01
Version SDK : 27
Version Release : 8.1.0
Version Codename : REL
Firmware Version : 1656176732
Userdata FS Type : EXT4
Read info from phone... OK
Processing data #1... OK
Reset Password done!