Z3X Pandora PRO 7.6 Released. New devices/functions added.

[SPYROS]

Pandora PRO 7.6 Released. New devices/functions added.
- Updated algo selecting/searching EDL loaders
- Added support for Honor phones:
Honor MagicPad 13 GDI-W09D/GDI-W09F/GDI-W09
Honor Pad 8 HEY-W09
Honor Pad X8a NDL-W09
Honor X8 TFY-LX1/TFY-LX2/TFY-LX3
Honor X9 4G ANY-LX1/ANY-LX2/ANY-LX3
Honor X30 ANY-AN00
Honor X9 5G ANY-NX1/ANY-NX2
Honor Play 40 WDY-AN00
Honor 70 Lite RBN-NX1
Honor X8a 5G RBN-NX3
Honor 50 Lite NTN-L22/NTN-L22D/NTN-LX1/NTN-LX3
Honor 60 LSA-AN00
Honor Pad X9 ELN-L03/ELN-L09/ELN-W09
Honor Magic 4 LGE-AN00
Honor Magic 4 Pro LGE-AN10
Honor Magic 4 Ultimate LGE-AN20
Honor Magic 4 Pro LGE-N19B/LGE-N49B/LGE-NX9
Honor Magic V MGI-AN00
- Added support for Huawei phones:
Huawei Nova 8i NEN-L22
Huawei MatePad SE 10.4 AGS5-AL00/AGS5-L09/AGS5-W00/AGS5-W09
Huawei Enjoy 70S GFY-AL00
Huawei Enjoy 60X STG-AL00
Huawei Nova Y91 STG-LX1/STG-LX2
Hi Nova 9z MNT-BD00
Huawei P50E ABR-AL60/ABR-AL60W/ABR-AL90
Hi Nova 10 ALH-BD00
Huawei MediaPad 10.4 2022 BAH4-AL10/BAH4-W19
Huawei Pocket S BAL-AL60
Huawei Pocket S BAL-AL80/BAL-AL80A
Huawei Nova 10z CHA-AL80
Huawei Nova 12 Lite FIN-AL60/FIN-AL60A
Huawei Nova 10 Pro GLA-AL00
Huawei Nova 10 Pro GLA-L21/GLA-L23/GLA-LX1/GLA-LX3
Huawei Nova 11 Pro GOA-AL80
Huawei Nova 11 Ultra GOA-AL80U
Huawei Nova 11 Pro GOA-L89/GOA-LX9
Hi Nova 9 Pro Hebe-BD00
Hi Nova 9 Hera-BD00
Hi Nova 11 MIZ-BD00
Huawei Nova 9 NAM-AL00/NAM-LX9
Huawei Nova 10 NCO-AL00/NCO-L21/NCO-LX1/NCO-LX3
Huawei Nova 9 Pro RTE-AL00
Huawei Mate 50E CET-AL60
Huawei MatePad Pro 11 GOT-AL09/GOT-AL19/GOT-W09
Huawei P50 ABR-AL00/ABR-AL80
Huawei P50 Pocket BAL-AL00/BAL-AL00A/BAL-L49
Huawei MatePad Air DBY2-AL00/DBY2-L09/DBY2-L09CK/DBY2-W00/DBY2-W09
Huawei MatePad Air DBY2Z-AL00
Huawei P50 Pro JAD-AL00
Huawei Mate X3 ALT-AL00/ALT-L29
- Added support for Samsung QCOM phones (EDL mode):
SM-A025M Galaxy A02s
SM-A207M Galaxy A20s
SM-A6060 Galaxy A60
SM-F741N Galaxy Z Flip6 5G
SM-F741U Galaxy Z Flip6 5G
SM-F9560 Galaxy Z Fold6
SM-G977U Galaxy S10 5G
SM-G981V Galaxy S20 5G
SM-G981W Galaxy S20 5G
SM-G990B2 Galaxy S21 FE 5G
SM-G990U2 Galaxy S21 FE 5G
SM-M556M Galaxy M55 5G
SM-S9060 Galaxy S22 Plus
SM-S9160 Galaxy S23 Plus
SM-S9260 Galaxy S24 Plus
- Added new loader for:
SM-F926B BIT 8
SM-A528B BIT 9
SM-A715F BIT B
SM-G780G BIT C
SM-G973U BIT 9
SM-N976U BIT 6
SM-S916N BIT 4
- Added support for QCOM based phones (EDL mode):
TCL 20 5G T781 T781H T781K
TCL 10 Plus T782P
TCL 30 V 5G T781S
TCL Plex T780H
TCL 20 SE T671H, T671F, T671O, T671E
OnePlus Nord N200 5G DE2118
- Added support for Mediatek based phones:
TCL 10 SE T766A/T766H/T766J/T766S/T766U
TCL 30 SE 6165D
Wiko Tommy 3 W-C200 W-C200SN
Alcatel 3L (2020) 5029D 5029F
- Added support for Unisoc based phones:
SC9832E
Safaricom Neon Smarta, Neon Smarta 2, Neon Smarta M
Enova N10
SC9863A:
Vortex A24
Teclast P10, P10 HD, P20, P20HD, P80
T606:
Teclast P40HD, T45HD, T50
T610
Teclast M40 Pro
T612
Teclast M50
Itel S23 Plus S681LN
T616
TECNO Spark Go 2024 BG6m
Teclast M50 Pro, T40 Air
ZTE Axon 60 Lite Z2350
T700
Teclast M40, M40S, T40

Download Link : 166.93 MB file on MEGA

 

[fm mobile lab]

Pandora PRO 7.6 Released. New devices/functions added.
- Updated algo selecting/searching EDL loaders
- Added support for Honor phones:
Honor MagicPad 13 GDI-W09D/GDI-W09F/GDI-W09
Honor Pad 8 HEY-W09
Honor Pad X8a NDL-W09
Honor X8 TFY-LX1/TFY-LX2/TFY-LX3
Honor X9 4G ANY-LX1/ANY-LX2/ANY-LX3
Honor X30 ANY-AN00
Honor X9 5G ANY-NX1/ANY-NX2
Honor Play 40 WDY-AN00
Honor 70 Lite RBN-NX1
Honor X8a 5G RBN-NX3
Honor 50 Lite NTN-L22/NTN-L22D/NTN-LX1/NTN-LX3
Honor 60 LSA-AN00
Honor Pad X9 ELN-L03/ELN-L09/ELN-W09
Honor Magic 4 LGE-AN00
Honor Magic 4 Pro LGE-AN10
Honor Magic 4 Ultimate LGE-AN20
Honor Magic 4 Pro LGE-N19B/LGE-N49B/LGE-NX9
Honor Magic V MGI-AN00
- Added support for Huawei phones:
Huawei Nova 8i NEN-L22
Huawei MatePad SE 10.4 AGS5-AL00/AGS5-L09/AGS5-W00/AGS5-W09
Huawei Enjoy 70S GFY-AL00
Huawei Enjoy 60X STG-AL00
Huawei Nova Y91 STG-LX1/STG-LX2
Hi Nova 9z MNT-BD00
Huawei P50E ABR-AL60/ABR-AL60W/ABR-AL90
Hi Nova 10 ALH-BD00
Huawei MediaPad 10.4 2022 BAH4-AL10/BAH4-W19
Huawei Pocket S BAL-AL60
Huawei Pocket S BAL-AL80/BAL-AL80A
Huawei Nova 10z CHA-AL80
Huawei Nova 12 Lite FIN-AL60/FIN-AL60A
Huawei Nova 10 Pro GLA-AL00
Huawei Nova 10 Pro GLA-L21/GLA-L23/GLA-LX1/GLA-LX3
Huawei Nova 11 Pro GOA-AL80
Huawei Nova 11 Ultra GOA-AL80U
Huawei Nova 11 Pro GOA-L89/GOA-LX9
Hi Nova 9 Pro Hebe-BD00
Hi Nova 9 Hera-BD00
Hi Nova 11 MIZ-BD00
Huawei Nova 9 NAM-AL00/NAM-LX9
Huawei Nova 10 NCO-AL00/NCO-L21/NCO-LX1/NCO-LX3
Huawei Nova 9 Pro RTE-AL00
Huawei Mate 50E CET-AL60
Huawei MatePad Pro 11 GOT-AL09/GOT-AL19/GOT-W09
Huawei P50 ABR-AL00/ABR-AL80
Huawei P50 Pocket BAL-AL00/BAL-AL00A/BAL-L49
Huawei MatePad Air DBY2-AL00/DBY2-L09/DBY2-L09CK/DBY2-W00/DBY2-W09
Huawei MatePad Air DBY2Z-AL00
Huawei P50 Pro JAD-AL00
Huawei Mate X3 ALT-AL00/ALT-L29
- Added support for Samsung QCOM phones (EDL mode):
SM-A025M Galaxy A02s
SM-A207M Galaxy A20s
SM-A6060 Galaxy A60
SM-F741N Galaxy Z Flip6 5G
SM-F741U Galaxy Z Flip6 5G
SM-F9560 Galaxy Z Fold6
SM-G977U Galaxy S10 5G
SM-G981V Galaxy S20 5G
SM-G981W Galaxy S20 5G
SM-G990B2 Galaxy S21 FE 5G
SM-G990U2 Galaxy S21 FE 5G
SM-M556M Galaxy M55 5G
SM-S9060 Galaxy S22 Plus
SM-S9160 Galaxy S23 Plus
SM-S9260 Galaxy S24 Plus
- Added new loader for:
SM-F926B BIT 8
SM-A528B BIT 9
SM-A715F BIT B
SM-G780G BIT C
SM-G973U BIT 9
SM-N976U BIT 6
SM-S916N BIT 4
- Added support for QCOM based phones (EDL mode):
TCL 20 5G T781 T781H T781K
TCL 10 Plus T782P
TCL 30 V 5G T781S
TCL Plex T780H
TCL 20 SE T671H, T671F, T671O, T671E
OnePlus Nord N200 5G DE2118
- Added support for Mediatek based phones:
TCL 10 SE T766A/T766H/T766J/T766S/T766U
TCL 30 SE 6165D
Wiko Tommy 3 W-C200 W-C200SN
Alcatel 3L (2020) 5029D 5029F
- Added support for Unisoc based phones:
SC9832E
Safaricom Neon Smarta, Neon Smarta 2, Neon Smarta M
Enova N10
SC9863A:
Vortex A24
Teclast P10, P10 HD, P20, P20HD, P80
T606:
Teclast P40HD, T45HD, T50
T610
Teclast M40 Pro
T612
Teclast M50
Itel S23 Plus S681LN
T616
TECNO Spark Go 2024 BG6m
Teclast M50 Pro, T40 Air
ZTE Axon 60 Lite Z2350
T700
Teclast M40, M40S, T40

Download Link : 166.93 MB file on MEGA

vivo 2024sec.......

 

[GsmToto]

Selected model: Motorola Mediatek
Operation: Erase FRP
Software version: 7.6
Work ID: 48505233

Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x489A667EE, 0x8DB1DCAB, 0x680D7D74, 0xC2410266
Get Chip ID... [MT6765]
Get SOC ID... [EC3B41D9E0954CAFE4E0622C7CBFE301A7 FDA7EF303C4BF9B4EB8C5425699A9F]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150420123CBCE0F276F66525036344D
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: RP64MB
EMMC_ID : 0x1501005420123CBCE0F276F25036344D
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x0E8F800000 (58,24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 80% - 90% device life time used
DeviceLifeTimeEstB: 80% - 90% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : motorola
Product Manufacturer : motorola
Product Model : moto g(8) power lite
Product Name : blackjack_64
Product Device : blackjack_64
Product Board : blackjack_64
Board Platform : mt6765
Build ID : QODS30.163-7-32
Build Date : Wed Mar 23 02:12:38 CST 2022
Display ID : QODS30.163-7-32 release-keys
Security Patch : 2022-02-05
Version SDK : 29
Version Release : 10
Version Codename : REL
Firmware Version : e923e
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Motorola_MT6765/FRP_BACKUP_(2024-11-03_15-44-52)/"directory
Format FRP... [P1] OK
Writting FRP data... OK
Erase FRP done!

 

[mrali2325]

Plz Add Samsung tool pro new update

 

[KCCNOMAAN]

Please Add Honor X9B ALI-NX2

 

[janaklama002]

Honor Magic 4 Ultimate LGE-AN20

fake.this model not added

 

[GsmToto]

Selected model: Samsung SM-A022F (Samsung Galaxy A02)
Operation: Flash (Upgrade)
Software version: 7.6

Parse scatter file... OK
Load Rom Images... OK
Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0699
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6739]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0699
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6739]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0699
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6739]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x60A926C8, 0xC2ABEC58, 0x2EAB6E68, 0x343A801A
Get Chip ID... [MT6739]
Get SOC ID... [426393C89F7520FAFC222A19737A5AC2F000A783CA560B0B8DFA4668654B2337]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [1]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... error(1)

 

[GsmToto]

Selected model: Tecno BG6m (TECNO Spark Go 2024)
Operation: Unlock bootloader
Software version: 7.6
Work ID: 4875588642

Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM3
Port: USB\VID_1782&PID_4D00\5&5114092&0&2
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T616_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Flash Type: EMMC
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO
Product Model : TECNO BG6
Product Name : BG6-RU
Product Device : TECNO-BG6
Product Board : TECNO-BG6
Board Platform : ums9230
Build ID : TP1A.220624.014
Build Date : Tue Sep 24 20:49:37 CST 2024
Display ID : BG6-F069-TGo-RU-V198-240924
Security Patch : 2024-09-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 162
Userdata FS Type : F2FS
Unlock bootloader... OK
Done!
If your phone after this operation keeps rebooting - use wipe data option.

 

[GsmToto]

Selected model: Xiaomi Redmi Note 11 5G (China) (Evergo)
Operation: Flash (Download only)
Software version: 7.6


Parse scatter file... OK
Load Rom Images... OK
Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM2 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM2 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xDE371001, 0x5CE7702B, 0x30018FD4, 0x10C0CABD
Get Chip ID... [MT6833]
Get SOC ID... [454FCD27853270C455CDC14285ADE9208E30123AA3FB337E38 C1BB51963B0AF8]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [14]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
UFS CID (FW VER): H9HQ15AECMBDAR (A043)
Load EMI config from preloader... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : H9HQ15AECMBDAR
UFS_FWVER : A043
BLOCK_SIZE: 0x0000001000 (4.00Kb)
UFS_LU0 : 0x0000400000 (4.00Mb)
UFS_LU1 : 0x0000400000 (4.00Mb)
UFS_LU2 : 0x1DCB000000 (119.17Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Get scatter info... OK
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : Redmi
Product Manufacturer : Xiaomi
Product Model : evergo
Product Name : evergo
Product Device : evergo
Product Board : evergo
Board Platform : mt6833
Build ID : SP1A.210812.016
Build Date : Tue Feb 6 05:43:48 UTC 2024
Display ID : TP1A.220624.014
Security Patch : 2024-02-01
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : V816.0.1.0.TGBCNXM
Userdata FS Type : F2FS
Get scatter info... OK
Verify scatter file... OK
Do NAND BMT remark... OK
Setup download info... OK
Get partition table catagory... OK [GPT]
Read mirror partition table... OK
Checking partition table layout changed... OK
Read major partition table... OK
Checking major partition table layout changed... OK
Download "preloader"... OK "preloder_backup"... OK
Download "cust"... OK
Download "rescue"... OK
Download "vbmeta_a"... OK
Download "vbmeta_system_a"... OK
Download "vbmeta_vendor_a"... OK
Download "md1img_a"... OK
Download "spmfw_a"... OK
Download "pi_img_a"... OK
Download "dpm_a"... OK
Download "scp_a"... OK
Download "sspm_a"... OK
Download "mcupm_a"... OK
Download "gz_a"... OK
Download "boot_a"... OK
Download "dtbo_a"... OK
Download "tee_a"... OK
Download "logo_a"... OK
Download "logo_b"... OK
Download "super"... OK
Download "userdata"... OK
Flashing done!

 

[ZechsWani]

Is it a paid tool?

 

[SuJianLai]

胡

 

[SuJianLai]

华为 荣耀 没更新上去

 

[SuJianLai]

Please login to view image

Pandora PRO 7.6 发布。添加了新设备/功能。
- 更新了算法选择/搜索 EDL 加载器
- 新增对 Honor 手机的支持：
荣耀 MagicPad 13 GDI-W09D/GDI-W09F/GDI-W09
荣耀平板 8 HEY-W09
荣耀平板 X8a NDL-W09
荣耀 X8 TFY-LX1/TFY-LX2/TFY-LX3
荣耀 X9 4G ANY-LX1/ANY-LX2/ANY-LX3
荣耀 X30 ANY-AN00
荣耀 X9 5G ANY-NX1/ANY-NX2
荣耀游戏 40 WDY-AN00
荣耀 70 Lite RBN-NX1
荣耀 X8a 5G RBN-NX3
荣耀 50 Lite NTN-L22/NTN-L22D/NTN-LX1/NTN-LX3
荣耀 60 LSA-AN00
荣耀平板 X9 ELN-L03/ELN-L09/ELN-W09
荣耀 Magic 4 LGE-AN00
荣耀 Magic 4 Pro LGE-AN10
荣耀 Magic 4 至臻版 LGE-AN20
荣耀 Magic 4 Pro LGE-N19B / LGE-N49B / LGE-NX9
荣耀 Magic V MGI-AN00
- 新增对华为手机的支持：
华为 Nova 8i NEN-L22
华为 MatePad SE 10.4 AGS5-AL00/AGS5-L09/AGS5-W00/AGS5-W09
华为畅享 70S GFY-AL00
华为畅享 60X STG-AL00
华为 Nova Y91 STG-LX1/STG-LX2
嗨 Nova 9z MNT-BD00
华为 P50E ABR-AL60/ABR-AL60W/ABR-AL90
嗨，新星 10 ALH-BD00
华为 MediaPad 10.4 2022 BAH4-AL10/BAH4-W19
华为 Pocket S BAL-AL60
华为 Pocket S BAL-AL80/BAL-AL80A
华为 Nova 10z CHA-AL80
华为 Nova 12 Lite FIN-AL60/FIN-AL60A
华为 Nova 10 Pro GLA-AL00
华为Nova 10 Pro GLA-L21 / GLA-L23 / GLA-LX1 / GLA-LX3
华为 Nova 11 Pro GOA-AL80
华为 Nova 11 Ultra GOA-AL80U
华为 Nova 11 Pro GOA-L89/GOA-LX9
嗨 Nova 9 Pro Hebe-BD00
嗨，Nova 9 Hera-BD00
嗨 Nova 11 MIZ-BD00
华为 Nova 9 NAM-AL00/NAM-LX9
华为 Nova 10 NCO-AL00/NCO-L21/NCO-LX1/NCO-LX3
华为 Nova 9 Pro RTE-AL00
华为 Mate 50E CET-AL60
华为 MatePad Pro 11 GOT-AL09 / GOT-AL19 / GOT-W09
华为 P50 ABR-AL00/ABR-AL80
华为 P50 袖珍 BAL-AL00/BAL-AL00A/BAL-L49
华为 MatePad Air DBY2-AL00/DBY2-L09/DBY2-L09CK/DBY2-W00/DBY2-W09
华为 MatePad Air DBY2Z-AL00
华为 P50 Pro JAD-AL00
华为 Mate X3 ALT-AL00/ALT-L29
- 添加了对三星 QCOM 手机（EDL 模式）的支持：
SM-A025M 银河 A02s
SM-A207M 银河 A20s
SM-A6060 银河 A60
SM-F741N Galaxy Z Flip6 5G 手机
SM-F741U 银河 Z Flip6 5G
SM-F9560 银河 Z 折叠6
SM-G977U 银河 S10 5G
SM-G981V 银河 S20 5G
SM-G981W 银河 S20 5G
SM-G990B2 银河 S21 FE 5G
SM-G990U2 银河 S21 FE 5G
SM-M556M 银河 M55 5G
SM-S9060 银河 S22 Plus
SM-S9160 银河 S23 Plus
SM-S9260 银河 S24 Plus
- 添加了新的加载器：
SM-F926B 位 8
SM-A528B 位 9
SM-A715F 钻头 B
SM-G780G 比特 C
SM-G973U 位 9
SM-N976U 位 6
SM-S916N 位 4
- 添加了对基于 QCOM 的电话（EDL 模式）的支持：
TCL 20 5G T781 T781H T781K
TCL 10 加 T782P
TCL 30 伏 5G T781S
TCL Plex T780H
TCL 20 SE T671H、T671F、T671O、T671E
一加 Nord N200 5G DE2118
- 添加了对基于 Mediatek 的手机的支持：
TCL 10 SE T766A / T766H / T766J / T766S / T766U
电子产品TCL 30 SE 6165D
Wiko 汤米 3 W-C200 W-C200SN
阿尔卡特 3L （2020） 5029D 5029F
- 添加了对基于 Unisoc 的电话的支持：
SC9832E
Safaricom 霓虹灯 Smarta、霓虹灯 Smarta 2、霓虹灯 Smarta M
Enova N10
SC9863A：
涡流 A24
Teclast P10、P10 HD、P20、P20HD、P80
T606：
Teclast P40HD、T45HD、T50
T610 系列
Teclast M40 专业版
T612 系列
Teclast M50
Itel S23 Plus S681LN
T616 系列
TECNO Spark Go 2024 BG6m
Teclast M50 Pro、T40 空气
中兴 Axon 60 Lite Z2350
T700 系列
Teclast M40、M40S、T40

下载链接 ： MEGA 上的66.93 MB 文件

加添没

 

[GsmToto]

Selected model: Infinix X6817 (Infinix Hot 12 Play)
Operation: Erase FRP And Wipe
Software version: 7.6
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES


Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xB9BC0D87, 0xEF1D64FA, 0xDB145514, 0x21A61E2E
Load DownloadAgent... OK
Search DA... OK [4]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [8]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: hDEaP3
EMMC_ID : 0x90014A6831065A39AA86544456150330
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x1D1F000000 (116.48Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: info not available
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : Infinix
Product Manufacturer : INFINIX
Product Model : Infinix X6817
Product Name : X6817-OP
Product Device : Infinix-X6817
Product Board : Infinix-X6817
Board Platform : mt6768
Build ID : SP1A.210812.016
Build Date : Thu Dec 14 21:20:19 CST 2023
Display ID : INFINIX-S-64-231214V1356
Security Patch : 2023-12-01
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : 231214V1668
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Infinix_X6817%20(Infinix%20Hot%2012%20Play)/FRP_BACKUP_(2024-11-11_12-33-24)/
Format FRP... [P1] OK
Writting FRP data... OK
Formatting "userdata" partition... OK
Formatting "metadata" partition... OK
Formatting "md_udc" partition... OK
Wipe data done!

 

[GsmToto]

Selected model: Samsung SM-X205 (Samsung Galaxy Tab A8 2021)
Operation: Erase FRP
Software version: 7.6
Work ID: 49748003

Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM5
Port: USB\VID_1782&PID_4D00\5&176EE8C1&0&1
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T610_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 83509K7Q00D7V
Read partitions info... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-X205
Product Name : gta8xx
Product Device : gta8
Product Board : ums512_25c10
Board Platform : ums512
Build ID : RP1A.200720.012
Build Date : Mon Mar 27 12:18:53 KST 2023
Firmware Version : X205XXS2CMH6
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Formatting "persistent" partition... OK
Formatting "userdata" partition... OK
Done!

 

[GsmToto]

Selected model: Vivo V2026 (Vivo Y12S)
Operation: Erase FRP
Software version: 7.6


Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM2 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x8932A28A, 0x0D9F4841, 0x2F7188A8, 0xED4FAE31
Load DownloadAgent... OK
Search DA... OK [2]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [7]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DX68MB
EMMC_ID : 0x150100442095AECDC47B7B345836384D
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x00C0000000 (3.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 50% - 60% device life time used
DeviceLifeTimeEstB: 50% - 60% device life time used
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : vivo
Product Manufacturer : vivo
Product Model : V2026
Product Name : 2026
Product Device : 2026
Product Board : k65v1_64_bsp
Board Platform : mt6765
Build ID : RP1A.200720.012
Build Date : Mon Oct 21 18:12:11 CST 2024
Display ID : RP1A.200720.012 release-keys
Security Patch : 2023-05-01
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : eng.compil.20241021.181531
Userdata FS Type : EXT4
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Vivo_V2026%20(Vivo%20Y12S)/FRP_BACKUP_(2024-11-12_21-32-11)/
Format FRP... [P1] OK
Writting FRP data... OK
Erase FRP done!