If You Have Any Problem Using UFI Box Or Any Problem Recover Set Post Here

[MOBICARE CLINIC]

each time I read and update emmc firmware on samsung a047f, a135f and a145f they also have bootloop...
please help..

 

[abytech]

Hi please my ufi box has be taken to police so i need to block its SN

 

[yuenbiao]

UFI BOX How to use TXON RXON Connect to A515 ISP .Can’t buy small boards

 

[vitekkbs]

Hello, is it possible to restore the ufi dongle sim card?

 

[Saad_ikram]

Ufi team please release an update regarding UFS prog
OTP/Descriptor unlocking
Read/write Chip config
Receiving an error while writing descriptors

 

[RamzilkO]

x3 pro,11 lite,11t and always one mistake. how to solve?

 

[Tahirshinwari]

can ufi box remove screen lock with ufs chip r1 r2 r3 r5? whic emmc socket use for this mode

 

[gruka]

I have the UFI Dongle which was running on windows 10 and just stopped and now givinf the error, may the team help
UFI_v1.7.0.2661_setup installed on my windows 10 Pro 64 Bit version 22H2(OS Build 19045.3636) After installation when
i try to run the software i get the erroe below

Problem while trying to Initialize application
Access violation at address 0153BE34 in module UFI.exe
Read of address 00000008.

May the team try to help fix this problem

 

[Johnkill]

 

[Johnkill]

No more support here for problems encountered?

 

[Aakib khan]

Ufi create com file failed
Cpp line 137

 

[musataff]

Connection status: XHCI:HUB3[#2]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-5223
Boot version: 1.05, FW version: 1.15 (Nov 8 2022 18:51:23)
Insertion test... CLK, CMD, DAT0 not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 4 bit (SDR 4MHz)
Access mode: sector mode
Power supply: high-voltage (2.7-3.6V)
Card/BGA: Card (removable) - SDHC
Manufacturer ID: 0x4D (Unknown)
Product name: SA04G (0x5341303447213c), rev: 0x0A, serial number: 0x0003DA01
Manufacturing date: Jan 1999
CID: 02544D53 41303447 213CBA03 DA011224
CSD: 400E0032 5B590000 1D177F80 0A40008C

why this problem
Insertion test... CLK, CMD, DAT0 not properly connected

 

[frandika putrasia]

Mengapa kotak ufi saya di blokir, ini milik pribadi saya yang saya beli, atas nama: [email protected]
Nomor seri : 1185508054

 

[GSM-Givann]

Sir, my box is in this version, how do I downgrade to the version Nov 8, 2022 because it doesn't connect ufs in this version I'm in?
Fw version: 1.37 (Nov 26 2023 12:10:23)

 

[daedibgu]

Why not enable update emmc fw

 

[Jane1]

Not possible to flash a Xiaomi phone. I wanted to flash Xiaomi Note 8T but failed.

Scanning for Qualcomm HS-USB QDLoader 9008 device...
Download Port: Qualcomm HS-USB QDLoader 9008 (COM8)
Connection status: XHCI:HUB3[#3]:USB 2.10 High-Speed
USB Device: [Qualcomm CDMA Technologies MSM] QUSB_BULK_CID:0411_SN:97288D00
USB Driver: [Qualcomm Incorporated] qcusbser:qcusbser.sys, version: 2.1.3.5, date: 12-17-2018
Initializing...
MSM Serial number: 0x97288d00
MSM HW ID: 0x0010a0e1 (SM6125,Nicobar), OEM ID: 0x0072 (Xiaomi), MODEL ID: 0x0000
OEM Public Key Hash: 1bebe3863a6781db4b01086063007334de9e5ca14971c7c4f4358ec9d79cda4692ce5e948c6fd409408f4c919fcadfe3
SBL SW version: 1
Firehose: prog_emmc_firehose_Sm6125_ddr.elf
hash: 4af6a68b45f19c636d83dfc96e53d4fd98eb714c, size: 586.76 KiB
oem version: m1-xm-ota-bd360.bj.idc.xiaomi.com
qc version: BOOT.XF.4.0-00219-NICOBARLAZ-2.434494.1
variant: NicobarPkgLAA
Loading firehose... Done
Handshaking...
Sending ping... Done
INFO: Binary build date: May 28 2022 23:47:58
INFO: Chip serial num: 2536017152 (0x97288d00)
Sending configurations...
Requesting flash signature from server...
First authentication failed, retrying ...
ERROR: Only nop and sig tag can be recevied before authentication.

I have an account with UFI box, 6 credits, yet flashing not possible

Anyone knows why?
Thanks for help

 

[Ashish mobile]

i need help please

24h2 problem

 

[aftab_ansari5287]

i need help please

24h2 problem

Because of Windows corruption. This program corrupts the file repeatedly.

 

[EM Tasol]

Can you help me recover this set?

Dead after removal of FRP, device not detected in port, totally no power. Below is ufi reading. Please need your assistant reviving this device.

Boot version: 1.04, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: 4X6KMB (0x3458364b4d42), rev: 0x09, serial number: 0x631BD07F
Manufacturing date: Apr 2021
CID: 15010034 58364B4D 4209631B D07F487C
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
Firmware version: 0x09
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Provisioned, counter: 1306]
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Secure Write Protect Information: 0x01
Secure Feature support: 0x55
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00

platform: MTK, cpu abi: armeabi-v7a
manufacturer: vivo
board: 2120, name: 2020
brand: vivo, model: V2120
build id: SP1A.210812.003, version: 12 [Android 12(Snow Cone)] (SP1A.210812.003 release-keys)
build description: full_k65v1_32_bsp_2g_ago-user 12 SP1A.210812.003 compiler02071051 release-keys

crypto state: encrypted?
Internal storage: 64 MiB
crypto state: unencrypted
eMMC selected: [SAMSUNG] KM4X6001KM-B321/32GB+LPDDR4X 16Gb (BGA254)

Best regards,

 

[Shah_Cruz]

Just bought the ufi box today...but unable to register and activate...the software itself wont open tp proceed the registration and activation...help me please...