HOT PANDORA PRO 7.2 / 7.3 Update. New security 2024 phones added.

[GsmToto]

Selected model: Lg Mediatek
Operation: Erase FRP
Software version: 7.3
Work ID: 419862203

Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM2 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0699
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CB00, SW VER: 0002, HW SUB CODE: 8A00
Detect chip [MT6739]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM2 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0699
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CB00, SW VER: 0002, HW SUB CODE: 8A00
Detect chip [MT6739]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x603EA4F6, 0xB8693AF1, 0xF11F0209, 0x370E2635
Get Chip ID... [MT6739]
Get SOC ID... [65D04FF83C29B4FC18D4F51C827761C44E0 7E1572906C3AB4EDD03CBDD5E0D2D]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [1]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x700100464D5903945271341454538202M
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: FMAEE8
EMMC_ID : 0x700100464D4590394527131454538202M
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0000400000 (4,00Mb)
EMMC_USER : 0x03A8000000 (14,63Gb)
RAM INFO:
INT_SRAM: 0x0000020000 (128,00Kb)
EXT_RAM : 0x0040000000 (1,00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 80% - 90% device life time used
DeviceLifeTimeEstB: 90% - 100% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : lge
Product Manufacturer : LGE
Product Model : LM-X120
Product Name : mmh6lm
Product Device : mmh6lm
Product Board : muse6739_mh6_p
Board Platform : mt6739
Build ID : PKQ1.180904.001
Build Date : Thu Jun 25 17:00:24 -03 2020
Display ID : PKQ1.180904.001
Security Patch : 2020-07-01
Version SDK : 28
Version Release : 9
Version Codename : REL
Firmware Version : 201780500b334
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Lg_MT6739/FRP_BACKUP_(2024-9-11_06-33-56)/
Format FRP... [P1] OK
Writting FRP data... OK
Erase FRP done!

 

[GsmToto]

Selected model: Samsung SM-A125U (Samsung Galaxy A12)
Operation: Erase FRP
Software version: 7.3

Searching USB Flash interface... COM4 detected
Setup connection... OK
Model: SM-A125U
SW version: A125USQS7CWN7
Sales code: VZW
Device ID: 0407fa08aaea
Vendor: SAMSUNG
Product: DX68MB
Unique Number: CDX00D1C190D933
FW Version: 3
Capacity: 32 Gb
Reading data from phone... OK
Sending data to phone... OK
Rebooting to download... OK
Searching USB Flash interface... COM4 detected
Setup connection... OK
Sending data to phone... OK
Sending data to phone... OK
Rebooting... OK
Erase FRP done!

 

[GsmToto]

Selected model: BLU G0830WW (BLU G52L)
Operation: Repair
Software version: 7.3
Work ID: 42467933

Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM3
Port: USB\VID_1782&PID_4D00\5&22B2B692&0&4
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: SC9863A_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 21103060267894327
Read partitions info... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : BLU
Product Manufacturer : BLU
Product Model : G52L
Product Name : G52L
Product Device : G0830WW
Product Board : s9863a1h10_go_32b
Board Platform : sp9863a
Build ID : SP1A.210812.016
Build Date : Thu Jun 20 17:33:18 CST 2024
Display ID : BLU_G0830WW_V12.0.G.04.14_GENERIC 20-06-2024 17:28
Security Patch : 2024-06-05
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : 25417
Userdata FS Type : F2FS
Load NVD... OK
Read IMEI... OK
Current IMEI:
IMEI 1: 35474437580064
IMEI 2: 35456805443212
Repaired IMEI:
IMEI 1: 35406890543789
IMEI 2: 35405703478874
Write IMEI... OK
Save NVD... OK
Done!

 

[saidanshah]

PANDORA PRO 7.2 / 7.3 Update.

- Added support Bypass Authorization in EDL Mode for Xiaomi phones:
(supported models and functions will be expanded soon)
11 Lite 5G NE : Lisa
Mi 10 : Umi
Mi 10T /Mi 10T Pro/Redmi K30S Ultra: Apollo
Mi 11 : Venus
Mi 11X/Poco F3/Redmi K40 : Alioth
Mi 11X Pro/Mi 11i/Redmi K40 Pro : Haydn
Mi 9 Pro/Redmi Note 9 Pro : Joyeuse
Poco F4/Redmi K40S : Munch
Poco M2 Pro : Gram
Poco X3/Poco X3 NFC : Surya
Redmi Note 10 : Mojito
Redmi Note 11 : Spes
Redmi Note 12 4G : Tapas
Redmi Note 6 Pro : Tulip
Redmi Note 9 Pro Max : Excalibur
- Fixed some bugs with new 2024 sec Texno/Infinix phones
- Fixed some bugs with unlock phones with Unisoc
- Added automatic update DB with loaders and download necessary loader,
more loaders will be shortly uploaded
- Added support for Samsung phones:
(Write Firmware (XML)*, Read/Write*/Wipe Security, Read Info, Read Partitions,
Wipe Data, Factory Reset, Reset FRP, Change CSC, Repair SN)
SM-E025F Galaxy F02s (BIT 6)
SM-G770F Galaxy S10 Lite (BIT 9)
SM-G780G Galaxy S20 FE (BIT
SM-G781B Galaxy S20 FE 5G (BIT A)
SM-G781U Galaxy S20 FE 5G (BIT E)
SM-G781V Galaxy S20 FE 5G (BIT C)
SM-T295 Galaxy Tab A 8.0 (2019) (BIT 6)
SM-T505 Galaxy Tab A7 10.4 (2020) (BIT8)
SM-T595 Galaxy Tab A 10.5 (BIT 4)
SM-T725 Galaxy Tab S5e LTE (BIT 1)
- Added new loader for SM-G990U (BIT C), SM-G991U (BIT C), SM-G996U (BIT C), SM-G998U (BIT C)
- Added support for Mediatek phones:
Motorola Moto E6s XT2053-1/XT2053-2/XT2053-3/XT2053-4
Lenovo Tab P11 Gen 2 TB350FU, TB350XU
Added support:

- new security 2024 for Tecno phones
- new security 2024 for Infinix phones


Added support for Xiaomi phones:

- Poco C61 / Redmi A3 Blue
- Poco X6 Neo/Redmi Note 13 5G/Redmi Note 13R Pro Gold*


Added:

- support new security (DA) Redmi 13C/Poco C65 Gale


Added support for Huawei phones:

Huawei P50 Pro JAD-AL80/JAD-L09/JAD-L29/JAD-LX9
Huawei Mate Xs 2 PAL-AL00/PAL-AL10/PAL-L29/PAL-LX9
Huawei Nova 10 Youth JLN-AL00

List of supported function for Huawei phones: (Write Firmware (XML)*, Read/Write*/Wipe Security, Read Info, Read Partitions, Wipe Data, Factory Reset, Reset FRP, Reset Huawei ID, Repair/Reset Chip Damage)


Added support for:

- Oukitel OT5, Oukitel IIIF150 Air1 Ultra


Added support for:

- Tecno Pova 6 Pro LI9


Added support for Samsung phones:

- SM-C7000 Galaxy C7 (BIT 2)
SM-E556B Galaxy F55 5G (BIT 1)
SM-F711B Galaxy Z Flip3 5G (BIT 7)
SM-F711U Galaxy Z Flip3 5G (BIT 6)
SM-F721B Galaxy Z Flip4 (BIT 5)
SM-F721U Galaxy Z Flip4 (BIT 6)
SM-F731B Galaxy Z Flip5 5G (BIT 3)
SM-F731U Galaxy Z Flip5 5G (BIT 4)
SM-F916U Galaxy Fold2 5G (BIT 2)
SM-F926B Galaxy Fold3 5G (BIT 5)
SM-F926N Galaxy Fold3 5G (BIT 2)
SM-F926U Galaxy Fold3 5G (BIT 5)
SM-F936B Galaxy Fold4 (BIT 5)
SM-F936N Galaxy Fold4 (BIT 2)
SM-F936U Galaxy Fold4 (BIT 4)
SM-F946B Galaxy Z Fold5 (BIT 3)
SM-F946U Galaxy Z Fold5 (BIT 4)
SM-F956U Galaxy Z Fold6 (BIT 1)


List of supported function for Samsung phones: (Write Firmware (XML)*, Read/Write*/Wipe Security, Read Info, Read Partitions, Wipe Data, Factory Reset, Reset FRP, Change CSC, Repair SN)


Added support Unisoc based phones:

SC7731E:
HWCD100E Hisense U40 Lite, HWCD103E Hisense U50 Lite, HWCD108E Hisense U60 Lite, KS964 Hisense U3
W6501 Itel P36, W5504 Itel P33, W6001 Itel P33 Plus

SC9832E:
HLTE243E Hisense E33, HLTE106E Hisense E32 Lite, U607 Hisense U31, HLTE109E Hisense U70 Pro

SC9863A:
HLTE242E Hisense E32 Pro
A665L Itel A70

T606:
Tecno Pop 8 (BG6h, BG6i)


Added new loader for SM-S918B (BIT6)

Now supported BIT (for Samsung) showning by EDL loader

Fixed some exceptions

please support qualcom repair

 

[yaseen khan]

Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM69 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x58C80701, 0x94C5394D, 0xB3BEB70F, 0x03CEAF21
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [14]
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : HN8T062EHKX039
UFS_FWVER : A003
BLOCK_SIZE: 0x0000001000 (4.00Kb)
UFS_LU0 : 0x0000400000 (4.00Mb)
UFS_LU1 : 0x0000400000 (4.00Mb)
UFS_LU2 : 0x1DCB000000 (119.17Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : OPPO
Product Manufacturer : OPPO
Product Model : CPH2617
Product Name : CPH2617IN
Product Device : OP5AD5L1
Product Board : k6833v1_64_k419
Board Platform : mt6833
Build ID : TP1A.220905.001
Build Date : Thu Aug 1 18:29:59 CST 2024
Display ID : CPH2617_14.0.0.1101(EX01)
Security Patch : 2024-08-05
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : T.R4T2.194cfef_645b4
Userdata FS Type : F2FS
Read security partition from phone...
Decrypting security data... OK
Encrypt security data... OK
Read partition "nvdata"... OK
Read partition "protect1"... OK
Read partition "nvram"... OK
Read NVDATA files... OK
Read NVRAM files... OK
Read security files... OK
Calculating... OK
Repairing IMEI...
IMEI 1: 8617370
IMEI 2: 8617370
Write IMEI and patch CERT [NVDATA]... OK
Checking patch type... patch impossible


Selected model: OPPO CPH2617 (Oppo A59 5G)
Operation: Repair
Software version: 7.3
Work ID: 42070318

 

[GsmToto]

Selected model: Tecno KG5j (Tecno Spark Go 2022)
Operation: Eliminar FRP
Software version: 7.3

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM7 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x964F4BB8, 0x8FD6FF5A, 0x1C6ADB08, 0xFA3B5T4H6M
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [5]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: CUTA42
EMMC_ID : 0x15010043555441343205574ABE557H97K
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x0E8F800000 (58,24Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233,25Kb)
EXT_RAM : 0x0080000000 (2,00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 10% - 20% device life time used
DeviceLifeTimeEstB: 10% - 20% device life time used
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO MOBILE LIMITED
Product Model : TECNO KG5j
Product Name : KG5j-OP
Product Device : TECNO-KG5j
Product Board : TECNO-KG5j
Board Platform : mt6761
Build ID : RP1A.200720.011
Build Date : Wed May 10 10:34:27 CST 2023
Display ID : TECNO-RGo-32-230510V398
Security Patch : 2023-05-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 230510V455
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Tecno_KG5j%20(Tecno%20Spark%20Go%202022)/FRP_BACKUP_(2024-9-12_17-33-21)/
Format FRP... [P1] OK
Writting FRP data... OK
Fix TOOL DL Image error... OK
Erase FRP done!

 

[aliipi]

Selected model: Vivo PD2147F (Vivo Y33s)
Operation: Repair
Software version: 7.3

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1633 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM20 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xE6AEC9FF, 0x325B853E, 0x26F89FF1, 0x19AE09ED
Load DownloadAgent... OK
Search DA... OK [3]
Send bootloader... error(DA_IN_BLACKLIST)

 

[GsmToto]

Selected model: Tecno LG7n (Tecno Pova 4)
Operation: Eliminar FRP
Software version: 7.3

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM4 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 1208
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6789]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xA2789D71, 0xD9C52CED, 0x3D909B6C, 0xF07B0288
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... OK
Start bootloader... OK
Setup device enviroment... OK
Setup device parametres... OK
Get device info... OK
UFS CID (FW VER): H9QT1G6DN6X132 ()
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [0]
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : H9QT1G6DN6X166
UFS_FWVER :
BLOCK_SIZE: 0x0000001000 (4,00Kb)
UFS_LU0 : 0x0000400000 (4,00Mb)
UFS_LU1 : 0x0000400000 (4,00Mb)
UFS_LU2 : 0x3B96000000 (238,34Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO
Product Model : TECNO LG7n
Product Name : LG7n-GL
Product Device : TECNO-LG7n
Product Board : mgvi_64_nfc_armv82
Board Platform : common
Build ID : SP1A.210812.016
Build Date : Fri Jun 28 16:22:09 CST 2024
Display ID : TECNO-S-64-ARMV82-240628V937
Security Patch : 2024-06-05
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : 240628V1979
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Tecno_LG7n%20(Tecno%20Pova%204)/FRP_BACKUP_(2024-9-12_22-42-44)/
Format FRP... [P1] OK
Writting FRP data... OK
Fix TOOL DL Image error... OK
Erase FRP done!

 

[GsmToto]

Selected model: Vivo PD2147F (Vivo Y33s)
Operation: Repair
Software version: 7.3

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1633 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM20 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xE6AEC9FF, 0x325B853E, 0x26F89FF1, 0x19AE09ED
Load DownloadAgent... OK
Search DA... OK [3]
Send bootloader... error(DA_IN_BLACKLIST)

Its new security, currently there is no solution for this.

 

[GsmToto]

Selected model: Spreadtrum Spreadtrum
Operation: Unlock network
Software version: 7.3

Product Model : Azumi_V5
Board Platform : sp9832e
Security Patch : 2021-12-05
Version SDK : 30
Version Release : 11
Firmware Version : 16389452333
Userdata FS Type : F2FS
Load NVD... OK
Unlock... OK
Save NVD... OK
Done!

 

[GsmToto]

elected model: Samsung SM-M145F (Galaxy M14 4G)
Operation: Erase FRP
Software version: 7.3
BIT 2 or less is supported by EDL loader
Work ID: 4275422

Waiting for device... OK
Device found at COM2
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 3614346495
Sahara ver: 2
OEM PK HASH: F6D8E6BA5F1EFC25E0A1699E10D1A4BCDC7A 1C8A7385023FDBF0BD1AE6E8CB6C
MSM HW ID: 001B80E100200000
SBL SW Ver: 00000000
CPU: SM6225 (Snapdragon 680 4G)
Vendor: Samsung
Prepare loader file... OK
Loader hash: F6D8E6BA5FD1AE6E8CB6CE10D1A4BCDC7A 1C8A7385023FDB45DDB6BDE76FECF1EA0E9107D34776EF1EFC25E0A1699F0B
Loader version: 6.5
Sending loader... OK
FireHose initialization... OK
Detecting memory type... OK [UFS]
Get storage info... OK
Storage info:
Type: UFS
Name: KM5P9001DM-B424
Page size: 1000
Block size: 1000
Partition count: 6
LU0 size: 0x0EC3400000
LU1 size: 0x0000800000
LU2 size: 0x0000800000
LU3 size: 0x0000400000
LU4 size: 0x0020000000
LU5 size: 0x0000800000
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... OK
Serial Number : R9ZN3LX305G
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-M145F
Product Name : a05sddxx
Product Device : a05s
Product Board : bengal
Board Platform : bengal
Build ID : TP1A.220624.014
Build Date : Mon Feb 12 22:29:25 KST 2024
Display ID : UP1A.231005.007.M14U2BXB35FXX
Security Patch : 2024-01-01
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : M1U2BXB345FXX
Userdata FS Type : F2FS
Erase FRP... OK
Done!

 

[rordunez90]

i got this error, the phone is working fine

Selected model: Samsung SM-A032M (Samsung Galaxy A03 Core)
Operation: Read Flash Info
Software version: 7.3
Work ID: 42509093

Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM19
Port: USB\VID_1782&PID_4D00\5&222E27AA&0&10
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: SC9863A
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: R7AT129F99M
Read partitions info... OK
Checking A/B state... OK
Read product info... [EXT4] ...
Exception: Out of memory

 

[GsmToto]

Selected model: Qualcomm Qualcomm
Operation: Read Partitions
Software version: 7.4

Waiting for device... OK
Device found at COM3
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 1469173541
Sahara ver: 2
OEM PK HASH: D40EEE56F3194667944134CD53CB767E 293D3C404979555574109A39267724AE
CPU: SM6115 (Snapdragon 662)
Vendor: Qualcomm
MSM HW ID: 0014D0E100000000
SBL SW Ver: 00000000
Prepare custom loader file... OK
Loader hash: 3B774D60B889D83C824DC32B3FEAA11F7290EC6C
Loader PK hash: 1BEBE3863A6781DB4B010860634 358EC9D79CDA4692CE5E948C6FD409408F4C919FCADFE3007334DE9E5CA14971C7C4F
Loader version: 6.5
Sending loader... OK
FireHose initialization... OK
Detecting memory type... OK [EMMC]
Get storage info... OK
Storage info:
Type: eMMC
Name: 3V6CAB
Page size: 200
Block size: 200
Partition count: 4
PART0 size: 0x1D1EC00000
PART1 size: 0x0000400000
PART2 size: 0x0000400000
PART3 size: 0x0001000000
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... OK
Product Brand : lge
Product Manufacturer : LGE
Product Model : LM-K735
Product Name : fh50lm
Product Device : fh50lm
Product Board : bengal
Board Platform : bengal
Build ID : RKQ1.201022.002
Build Date : Thu Dec 3 21:45:37 KST 2020
Security Patch : 2020-12-01
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 2033821469e76
Userdata FS Type : F2FS
Read partition "gpt_main0"... OK
Read partition "xbl_a"... OK
Read partition "xbl_b"... OK
Read partition "xbl_config_a"... OK
Read partition "xbl_config_b"... OK
Read partition "devcfg_a"... OK
Read partition "devcfg_b"... OK
Read partition "qupfw_a"... OK
Read partition "qupfw_b"... OK
Read partition "vbmeta_a"... OK
Read partition "vbmeta_b"... OK
Read partition "vbmeta_system_a"... OK
Read partition "vbmeta_system_b"... OK
Read partition "storsec"... OK
Read partition "secdata"... OK
Read partition "multiimgoem_a"... OK
Read partition "multiimgoem_b"... OK
Read partition "multiimgqti"... OK
Read partition "spare1"... OK
Read partition "modemst1"... OK
Read partition "modemst2"... OK
Read partition "apdp"... OK
Read partition "msadp"... OK
Read partition "fsc"... OK
Read partition "ssd"... OK
Read partition "limits"... OK
Read partition "ddr"... OK
Read partition "misc"... OK
Read partition "rct"... OK
Read partition "featenabler_a"... OK
Read partition "featenabler_b"... OK
Read partition "spare2"... OK
Read partition "ftm"... OK
Read partition "fsg"... OK
Read partition "spare3"... OK
Read partition "abl_a"... OK
Read partition "abl_b"... OK
Read partition "hyp_a"... OK
Read partition "hyp_b"... OK
Read partition "keymaster_a"... OK
Read partition "keymaster_b"... OK
Read partition "sid_a"... OK
Read partition "sid_b"... OK
Read partition "rpm_a"... OK
Read partition "rpm_b"... OK
Read partition "akmu_a"... OK
Read partition "akmu_b"... OK
Read partition "uefivarstore"... OK
Read partition "spare4"... OK
Read partition "tz_a"... OK
Read partition "tz_b"... OK
Read partition "dtbo_a"... OK
Read partition "dtbo_b"... OK
Read partition "modem_a"... OK
Read partition "modem_b"... OK
Read partition "boot_a"... OK
Read partition "boot_b"... OK
Read partition "laf_a"... OK
Read partition "laf_b"... OK
Read partition "recovery_a"... OK
Read partition "recovery_b"... OK
Read partition "imagefv_a"... OK
Read partition "imagefv_b"... OK
Read partition "uefisecapp_a"... OK
Read partition "uefisecapp_b"... OK
Read partition "dsp_a"... OK
Read partition "dsp_b"... OK
Read partition "logfs"... OK
Read partition "logdump"... OK
Read partition "raw_resources_a"... OK
Read partition "raw_resources_b"... OK
Read partition "toolsfv"... OK
Read partition "devinfo"... OK
Read partition "spare5"... OK
Read partition "frp"... OK
Read partition "keystore"... OK
Read partition "eksst"... OK
Read partition "pstore"... OK
Read partition "spare6"... OK
Read partition "persist"... OK
Read partition "metadata"... OK
Read partition "drm"... OK
Read partition "sns"... OK
Read partition "power"... OK
Read partition "p_persist_lg"... OK
Read partition "mpt"... OK
Read partition "els"... OK
Read partition "eri"... OK
Read partition "operatorlogging"... OK
Read partition "persdata"... OK
Read partition "carrier"... OK
Read partition "super"... OK
Read partition "gpt_backup0"... OK
Read partition "BOOT1"... OK
Read partition "BOOT2"... OK
Read partition "BOOT3"... error(2), skip
Done!