HOT PANDORA PRO 7.2 / 7.3 Update. New security 2024 phones added.

Faizullah shadab

Active Member
Jan 12, 2022
19
1
Pakistan/Balochistan/Nushki
Selected model: Huawei MRD-LX1F (Huawei Y6 Pime)
Operation: Wipe Data
Software version: 7.2
There is a risk of data loss.
This procedure will erase all User Data
Make sure that you have a backup created. Continue? YES

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,usbser,MediaTek PreLoader USB VCOM (Android),usbser.sys,10.0.18362.1]
You are using driver version 10.0.18362.1, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM5 [PRELOADER]
Open port... OK
Send start cmd... error(4)
 

Faizullah shadab

Active Member
Jan 12, 2022
19
1
Pakistan/Balochistan/Nushki
Selected model: Huawei MRD-LX1F (Huawei Y6 Pime)
Operation: Wipe Data
Software version: 7.2
There is a risk of data loss.
This procedure will erase all User Data
Make sure that you have a backup created. Continue? YES

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,usbser,MediaTek PreLoader USB VCOM (Android),usbser.sys,10.0.18362.1]
You are using driver version 10.0.18362.1, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM5 [PRELOADER]
Open port... OK
Send start cmd... error(4)
Tfm done it

Model : Auto

Exe Name : TFM Tool Pro MTK v2.3.0

Exe Version : v2.3.0

Action : Factory Reset With FRP Lock



Checking account info...

UserName: tpar7

Expire Date: 2025-02-12 09:15:04

Balance: 0.00 USD



Waiting for usb device...

Detected MediaTek USB Port (COM17)



Driver Details

Driver MF MediaTek Inc.

Driver Name usbser

Driver Version 1.0.0.0

Driver Date 1-1-2021



Connecting to brom...

Successfully connected with brom!



Brom Information...

Chip : MT6761

Hw Code : 0x717

Meid : 459fdb92d40e20cd67b1edb3016d11f8



Gathering information...Ok



Downloading resource1...Ok

Initializing resource1...Ok



Installing boothelper...Ok

Disabling watchdog...Ok

Patching the memory...Ok

Sending cert file...Ok



Checking cert validation...Ok



Reading the dram data...

Preloader Name: preloader_k61v1_64_mexico.bin

Checking the brom connection...Ok

Downloading resource2...Ok

Initializing resource2...Ok



Downloading first da...

Transferring control to DA...Ok

Syncing 1st DA sync char...Ok

Syncing 2nd DA sync char...Ok

1st da successfully sended



CID:150100514436334D4201968796E5C61D

Initializing emi config...Ok



Downloading resource3...Ok

Initializing resource3...Ok

Downloading resource4...Ok

Initializing resource4...Ok



Downloading second da...Ok

Usb Speed Status : High-Speed

Writing remote data...Ok



DA Information....



Boot information...

Chip ID : 0x200ca018a000717

Storage : EMMC

Boot1 : 4.00MB

Boot1 : 4.00MB

Rpmb : 16.00MB

Userarea : 29.12GB

MLC : 0x2

SLC : 0x2

EOL : 0x1

LCycle : 0x0

CID : 135895477312952018602274754882499574166

MFRID : 0x15

Vendor : Samsung

Card BGA : BGA (Discrete embedded)

OEMID : 0x0

Product : QD63MB:514436334d42

Revision : 0.1

Card SN : 968796e5

MFDate : 12/2019



Factory Resetting...Ok

FRP Resetting...Ok



Rebooting phone...Ok



Operation Finished!



Elasped Time : [01:min:00:sec]

Saving logs...

Operation/Work ID: 14100642
 

saeedpakmanesh

Junior Member
Sep 4, 2024
1
0
uae
PANDORA PRO 7.2 Update.


Added support:

- new security 2024 for Tecno phones
- new security 2024 for Infinix phones


Added support for Xiaomi phones:

- Poco C61 / Redmi A3 Blue
- Poco X6 Neo/Redmi Note 13 5G/Redmi Note 13R Pro Gold*


Added:

- support new security (DA) Redmi 13C/Poco C65 Gale


Added support for Huawei phones:

Huawei P50 Pro JAD-AL80/JAD-L09/JAD-L29/JAD-LX9
Huawei Mate Xs 2 PAL-AL00/PAL-AL10/PAL-L29/PAL-LX9
Huawei Nova 10 Youth JLN-AL00


List of supported function for Huawei phones: (Write Firmware (XML)*, Read/Write*/Wipe Security, Read Info, Read Partitions, Wipe Data, Factory Reset, Reset FRP, Reset Huawei ID, Repair/Reset Chip Damage)


Added support for:

- Oukitel OT5, Oukitel IIIF150 Air1 Ultra


Added support for:

- Tecno Pova 6 Pro LI9


Added support for Samsung phones:

- SM-C7000 Galaxy C7 (BIT 2)
SM-E556B Galaxy F55 5G (BIT 1)
SM-F711B Galaxy Z Flip3 5G (BIT 7)
SM-F711U Galaxy Z Flip3 5G (BIT 6)
SM-F721B Galaxy Z Flip4 (BIT 5)
SM-F721U Galaxy Z Flip4 (BIT 6)
SM-F731B Galaxy Z Flip5 5G (BIT 3)
SM-F731U Galaxy Z Flip5 5G (BIT 4)
SM-F916U Galaxy Fold2 5G (BIT 2)
SM-F926B Galaxy Fold3 5G (BIT 5)
SM-F926N Galaxy Fold3 5G (BIT 2)
SM-F926U Galaxy Fold3 5G (BIT 5)
SM-F936B Galaxy Fold4 (BIT 5)
SM-F936N Galaxy Fold4 (BIT 2)
SM-F936U Galaxy Fold4 (BIT 4)
SM-F946B Galaxy Z Fold5 (BIT 3)
SM-F946U Galaxy Z Fold5 (BIT 4)
SM-F956U Galaxy Z Fold6 (BIT 1)



List of supported function for Samsung phones: (Write Firmware (XML)*, Read/Write*/Wipe Security, Read Info, Read Partitions, Wipe Data, Factory Reset, Reset FRP, Change CSC, Repair SN)


Added support Unisoc based phones:

SC7731E:
HWCD100E Hisense U40 Lite, HWCD103E Hisense U50 Lite, HWCD108E Hisense U60 Lite, KS964 Hisense U3
W6501 Itel P36, W5504 Itel P33, W6001 Itel P33 Plus


SC9832E:
HLTE243E Hisense E33, HLTE106E Hisense E32 Lite, U607 Hisense U31, HLTE109E Hisense U70 Pro

SC9863A:
HLTE242E Hisense E32 Pro
A665L Itel A70


T606:
Tecno Pop 8 (BG6h, BG6i)


Added new loader for SM-S918B (BIT6)

Now supported BIT (for Samsung) showning by EDL loader


Fixed some exceptions
thx
 

GsmToto

Super Moderator
Jan 1, 2021
4,871
21,545
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Tecno BG6 (Tecno Spark Go 2024)
Operation: Erase FRP
Software version: 7.2

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM5
Port: USB\VID_1782&PID_4D00\6&17B2F180&0&2
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T616_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 109993F68854F23M8
Flash Type: UFS
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO
Product Model : TECNO BG6
Product Name : BG6-OPPJ
Product Device : TECNO-BG6
Product Board : TECNO-BG6
Board Platform : ums9230
Build ID : TP1A.220624.014
Build Date : Wed Apr 17 17:11:17 CST 2024
Display ID : BG6-F069AlAmAnFjFkFl-TGo-OPPJ-PJ-240417V856
Security Patch : 2024-04-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 110
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Done!
 
  • Like
Reactions: tsui_thomas

GsmToto

Super Moderator
Jan 1, 2021
4,871
21,545
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Mediatek Mediatek
Operation: Read PTT
Software version: 7.2

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM2 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0699
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CB00, SW VER: 0002, HW SUB CODE: 8A00
Detect chip [MT6739]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0699
Get HW & SW version from device... OK
HW VER: CB00, SW VER: 0002, HW SUB CODE: 8A00
Detect chip [MT6739]
Get sec config... OK [00000000]
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM2 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0699
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CB00, SW VER: 0002, HW SUB CODE: 8A00
Detect chip [MT6739]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x661C1C2C, 0x02D4517S, 0x6F146F0D, 0x923D33SB
Get Chip ID... [MT6739]
Get SOC ID... [CE0D0E425E43E52B1B2DA186428272D 9760E885BF1097D2DB8B8F0D6DF88479B]
Get sec config... OK [00000000]
Load DownloadAgent... OK
Search DA... OK [1]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xD60147510142FAD0180D004D4D433332F
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: MMC32G
EMMC_ID : 0xD601004510142FAD0180DD4D43333247F
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0750000000 (29.25Gb)
RAM INFO:
INT_SRAM: 0x0000020000 (128.00Kb)
EXT_RAM : 0x0040000000 (1.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : PCD
Product Manufacturer : PCD
Product Model : P50
Product Name : P50
Product Device : P50
Product Board : k39tv1_bsp_1g
Board Platform : mt6739
Build ID : RP1A.200720.011
Build Date : Tue Jun 7 14:48:20 CST 2022
Display ID : PCD_P50_CLARO_PR_V1.7
Security Patch : 2022-05-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 1654139241
Userdata FS Type : F2FS
Read partition "preloader"... OK
Read partition "preloader_backup"... OK
Read partition "pgpt"... OK
Read partition "boot_para"... OK
Read partition "para"... OK
Read partition "expdb"... OK
Read partition "frp"... OK
Read partition "nvcfg"... OK
Read partition "nvdata"... OK
Read partition "md_udc"... OK
Read partition "metadata"... OK
Read partition "protect1"... OK
Read partition "protect2"... OK
Read partition "seccfg"... OK
Read partition "sec1"... OK
Read partition "proinfo"... OK
Read partition "nvram"... OK
Read partition "logo"... OK
Read partition "vbmeta_a"... OK
Read partition "vbmeta_system_a"... OK
Read partition "vbmeta_vendor_a"... OK
Read partition "md1img_a"... OK
Read partition "md1dsp_a"... OK
Read partition "spmfw_a"... OK
Read partition "mcupmfw_a"... OK
Read partition "gz_a"... OK
Read partition "lk_a"... OK
Read partition "loader_ext_a"... OK
Read partition "boot_a"... OK
Read partition "vendor_boot_a"... OK
Read partition "dtbo_a"... OK
Read partition "tee_a"... OK
Read partition "vbmeta_b"... OK
Read partition "vbmeta_system_b"... OK
Read partition "vbmeta_vendor_b"... OK
Read partition "md1img_b"... OK
Read partition "md1dsp_b"... OK
Read partition "spmfw_b"... OK
Read partition "mcupmfw_b"... OK
Read partition "gz_b"... OK
Read partition "lk_b"... OK
Read partition "loader_ext_b"... OK
Read partition "boot_b"... OK
Read partition "vendor_boot_b"... OK
Read partition "dtbo_b"... OK
Read partition "tee_b"... OK
Read partition "super"... OK
Read partition "flashinfo"... OK
Read partition "sgpt"... OK
Saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Mediatek_MT6739/Mediatek_Mediatek_DUMP_(2024-9-5_21-43-33)/
Dumping Partitions done!
 
  • Like
Reactions: tsui_thomas

GsmToto

Super Moderator
Jan 1, 2021
4,871
21,545
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Xiaomi Redmi 13C (Gale)
Operation: Repair META
Software version: 7.2
Work ID: 4175347933

MetaCore version [10.2124.0.3]
Connecting to AP COM(34)... OK
modem_number = 1, modem_id = 1
md service = 2, ch type = 2
current modem type = LWG
modem img type[0] = 12
Connecting to META... OK
BB_CHIP : MT6768
SW_TIME : 2000.00.00
DSP_FW_VER : 1.0
SW_VER : XIAOMI_S0MP1_K69V1_64_HW
HW_VER : Unknown
MELODY_VER : LWCTG_C3U_6177W_CUSTOM
NVSecOn ... OFF
Load DB From target... OK
NVRAM init ... OK

CURRENT IMEI:
IMEI1 = 86XXXXXXXXXXXX
IMEI2 = 86XXXXXXXXXXXX
Set IMEI 1 to 8639818548... OK
verify IMEI 1... OK
Set IMEI 2 to 863989767543... OK
verify IMEI 2... OK
Repair Security done!
 
  • Like
Reactions: tsui_thomas

aliipi

Friend's Martview
Oct 28, 2019
147
47
Selected model: Infinix X6833B (Infinix Note 30)
Operation: Repair
Software version: 7.2

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1633 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM16 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 1208
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6789]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xBAF1C027, 0xEB0DBC35, 0x1B437A26, 0x26FAD56A
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... error(DA_INIT_KEY_FAIL). Secure DA agent not compatible for this preloader.
Try select other DA type.
 
  • Like
Reactions: GsmToto

GsmToto

Super Moderator
Jan 1, 2021
4,871
21,545
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Infinix X6833B (Infinix Note 30)
Operation: Repair
Software version: 7.2

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1633 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM16 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 1208
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6789]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xBAF1C027, 0xEB0DBC35, 0x1B437A26, 0x26FAD56A
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... error(DA_INIT_KEY_FAIL). Secure DA agent not compatible for this preloader.
Try select other DA type.
Have you tried to choose another DA types?
 
  • Like
Reactions: tsui_thomas

GsmToto

Super Moderator
Jan 1, 2021
4,871
21,545
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: OPPO CPH2269 (OPPO A16)
Operation: Erase FRP And Wipe
Software version: 7.3
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES
Work ID: 41743544

Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM2 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x73A3AAF5, 0x48356AF5, 0x113F7701, 0x7EE644B8
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [7]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: G1J9R8
EMMC_ID : 0x1303952381012F43298581714E47314AD
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 30% - 40% device life time used
DeviceLifeTimeEstB: 10% - 20% device life time used
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : OPPO
Product Manufacturer : OPPO
Product Model : CPH2269
Product Name : CPH2269
Product Device : OP4F97
Product Board : k65v1_64_bsp
Board Platform : mt6765
Build ID : SP1A.210812.016
Build Date : Fri Jul 26 09:54:41 CST 2024
Display ID : CPH2269_11_C.40
Security Patch : 2024-08-05
Version Release : 12
Firmware Version : R.197f456-4b5dc
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/OPPO_CPH2269%20(OPPO%20A16)/FRP_BACKUP_(2024-9-7_22-32-22)/
Format FRP... [P1] OK
Writting FRP data... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Formatting "md_udc" partition... OK
Wipe data done!
 

aliipi

Friend's Martview
Oct 28, 2019
147
47
Selected model: Infinix X6833B (Infinix Note 30)
Operation: Repair
Software version: 7.2

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1633 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM16 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 1208
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6789]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xBAF1C027, 0xEB0DBC35, 0x1B437A26, 0x26FAD56A
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... error(DA_INIT_KEY_FAIL). Secure DA agent not compatible for this preloader.
Try select other DA type.
 

amanat

Active Member
Aug 5, 2017
31
5
lahore
Skype
hafiz.amanit
Selected model: Xiaomi Redmi 13C (Gale)
Operation: Repair META
Software version: 7.2
Work ID: 4175347933

MetaCore version [10.2124.0.3]
Connecting to AP COM(34)... OK
modem_number = 1, modem_id = 1
md service = 2, ch type = 2
current modem type = LWG
modem img type[0] = 12
Connecting to META... OK
BB_CHIP : MT6768
SW_TIME : 2000.00.00
DSP_FW_VER : 1.0
SW_VER : XIAOMI_S0MP1_K69V1_64_HW
HW_VER : Unknown
MELODY_VER : LWCTG_C3U_6177W_CUSTOM
NVSecOn ... OFF
Load DB From target... OK
NVRAM init ... OK

CURRENT IMEI:
IMEI1 = 86XXXXXXXXXXXX
IMEI2 = 86XXXXXXXXXXXX
Set IMEI 1 to 8639818548... OK
verify IMEI 1... OK
Set IMEI 2 to 863989767543... OK
verify IMEI 2... OK
Repair Security done!
Have you changed the resistance or without
 

Akmal Khan

Junior Member
Dec 23, 2020
3
1
hafizabad
Thanks for good update but what about vivo 2024 security patch solution in preloader mode
Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM8 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x7C4EF3B6, 0x7FACA0E2, 0xE735100C, 0xC74F7DE2
Load DownloadAgent... OK
Search DA... OK [2]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [7]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DP6DBB
EMMC_ID : 0x150100445036444242021CEBF2D329E3
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 20% - 30% device life time used
DeviceLifeTimeEstB: 10% - 20% device life time used
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM disabled !!!
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : vivo
Product Manufacturer : vivo
Product Model : V2149
Product Name : 2149
Product Device : 2149
Product Board : k62v1_64_bsp
Board Platform : mt6765
Build ID : RP1A.200720.012
Build Date : Wed Feb 21 10:53:43 CST 2024
Display ID : RP1A.200720.012 release-keys
Security Patch : 2024-02-01
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : eng.compil.20240221.105718
Userdata FS Type : EXT4
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Vivo_PD2139BF%20(Vivo%20Y21%20(2021))/FRP_BACKUP_(2024-9-8_17-44-26)/
Format FRP... [P1] OK
Writting FRP data... OK
Erase FRP done!



Selected model: Vivo PD2139BF (Vivo Y21 (2021))
Operation: Erase FRP
Software version: 7.3
Work ID: 41631289
 
  • Like
Reactions: GsmToto

GsmToto

Super Moderator
Jan 1, 2021
4,871
21,545
UK
Skype
gsmtoto
Sonork ID
100.1684601
elected model: Tecno BF7 (Tecno Spark Go 2023)
Operation: Eliminar FRP
Software version: 7.3

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM2 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xB704114D, 0x9456D295, 0xBEC200C2, 0x5566E539
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: ARV11X
EMMC_ID : 0xF4012241525631315813531D88C21A05
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0000400000 (4,00Mb)
EMMC_USER : 0x0E90000000 (58,25Gb)
RAM INFO:
INT_SRAM: 0x000003A600 (233,50Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO
Product Model : TECNO BF7
Product Name : BF7-GL
Product Device : TECNO-BF7
Product Board : TECNO-BF7
Board Platform : mt6761
Build ID : SP1A.210812.016
Build Date : Wed Jul 3 12:26:53 CST 2024
Display ID : TECNO-S-64-240703V1695
Security Patch : 2024-06-05
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : 240703V1812
Userdata FS Type : F2FS
Switch to BROM
Read partition "preloader"... OK
Read partition "preloader_backup"... OK
Parse scatter file... OK
Load Rom Images... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Connect phone to [BOX] in BROM mode
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0717
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM2 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xB704114D, 0x9456D295, 0xBEC200C2, 0x5566E539
Get Chip ID... [MT6761]
Get SOC ID... [350F44A7E4DD6A511E421561A911365BEF6D 9346AB7502B57C8C0A30A98B87DB]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xF401224152563188C21A05315813531D
Load EMI from file... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: ARV11X
EMMC_ID : 0xF40122415256388C21A051315813531D
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0000400000 (4,00Mb)
EMMC_USER : 0x0E90000000 (58,25Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233,25Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 20% - 30% device life time used
DeviceLifeTimeEstB: 20% - 30% device life time used
Checking USB status... USB_HIGH_SPEED
Restore parts:
Write file "preloader_bf7_h6127.bin"... OK
Write file "preloader_bf7_h6127_backup.bin"... OK
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Tecno_BF7%20(Tecno%20Spark%20Go%202023)/FRP_BACKUP_(2024-9-8_20-33-43)/
Format FRP... [P1] OK
Writting FRP data... OK
Fix TOOL DL Image error... OK
Erase FRP done!
 

GsmToto

Super Moderator
Jan 1, 2021
4,871
21,545
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Tecno KI5K (Tecno Spark 10C)
Operation: Erase FRP
Software version: 7.3

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM3
Port: USB\VID_1782&PID_4D00\6&17B2F180&0&2
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T612_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 105473736O114646
Flash Type: UFS
Read partitions info... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO
Product Model : TECNO KI5k
Product Name : KI5k-GL
Product Device : TECNO-KI5k
Product Board : TECNO-KI5k
Board Platform : ums9230
Build ID : SP1A.210812.016
Build Date : Tue May 7 12:53:16 CST 2024
Display ID : KI5k-F065-S-GL-V568-20240507
Security Patch : 2024-05-05
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : GL-2024V5680507
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Done!
 

benzeetech

Junior Member
Jun 20, 2024
2
0
Nigeria
Selected model: Huawei MRD-LX1F (Huawei Y6 Pime)
Operation: Wipe Data
Software version: 7.2
There is a risk of data loss.
This procedure will erase all User Data
Make sure that you have a backup created. Continue? YES

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,usbser,MediaTek PreLoader USB VCOM (Android),usbser.sys,10.0.18362.1]
You are using driver version 10.0.18362.1, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM5 [PRELOADER]
Open port... OK
Send start cmd... error(4)
link for pandora 7.3
 

GsmToto

Super Moderator
Jan 1, 2021
4,871
21,545
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Xiaomi Poco M4 Pro 5G (Evergreen)
Operation: Repair
Software version: 7.3
Work ID: 41746722

Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM2 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM2 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xA42C6CA2, 0x103B75A3, 0xFE0395ED, 0xFAD3F956
Get Chip ID... [MT6833]
Get SOC ID... [2C56643E218998F8CC66F0A05213FC0C20F085EB46813BD21F6FE3AFCF7AWD]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [14]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
UFS CID (FW VER): H9HQ15AFAMBDAR (A043)
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : H9HQ15AFAMBAWV
UFS_FWVER : A043
BLOCK_SIZE: 0x0000001000 (4.00Kb)
UFS_LU0 : 0x0000400000 (4.00Mb)
UFS_LU1 : 0x0000400000 (4.00Mb)
UFS_LU2 : 0x1DCB000000 (119.17Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : POCO
Product Manufacturer : Xiaomi
Product Model : evergreen
Product Name : evergreen_global
Product Device : evergreen
Product Board : evergreen
Board Platform : mt6833
Build ID : SP1A.210812.016
Build Date : Fri Sep 9 15:23:23 CST 2022
Display ID : evergreen-user 12 SP1A.210812.016 V13.0.3.0.SGBMSBT
Security Patch : 2022-09-01
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : V13.0.3.0.SGBMISBT
Userdata FS Type : F2FS
Read security partition from phone...
Decrypting security data... OK
Encrypt security data... OK
Read partition "nvdata"... OK
Read partition "protect1"... OK
Read partition "nvram"... OK
Read NVDATA files... OK
Read NVRAM files... OK
Read security files... OK
Calculating... OK
Read IMEI... OK
IMEI 1: 86489859043526
IMEI 2: 86143647478586
Repairing IMEI...
IMEI 1: 876875675765750
IMEI 2: 873745859067042
Write IMEI and patch CERT [NVDATA]... OK
Load partiton for patching... OK
Checking boot unlock status... LOCKED
Patching... OK
Selected "Auto unlock bootloader"
Read security partition from phone... OK
Downgrading bootloaders for evergreen ... [BL1] ... [BL2] ... OK
Write security partition to phone... OK
Unlock bootloader done!
Selected "Disable VBMETA verification"
Read security partition from phone... OK
Write security partition to phone... OK
Write IMEI and patch CERT [NVRAM]... OK
Write partition "nvdata"... OK
Write partition "nvram"... OK
Repair Security and Patch cert done!
If your phone after repair keeps rebooting - use wipe data option.
 
  • Like
Reactions: tsui_thomas

GsmToto

Super Moderator
Jan 1, 2021
4,871
21,545
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Xiaomi Redmi Note 11 Pro 4G (Viva)
Operation: Read Region
Software version: 7.3
Work ID: 417985433

Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 1066
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6781]
Install LibUSB... OK
Waiting for device... OK
Open port... OK
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 1066
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6781]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xE1C6BA08, 0x70B27237, 0x166486AD, 0xC0E20CE0
Get Chip ID... [MT6781]
Get SOC ID... [A001E4D37DC0F85BC7C87833622496BED31269E4ADFB021F13C37F1B4GG6D4W]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [11]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
UFS CID (FW VER): KM8L9001JM-B624 (0300)
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : KM8L9001JM-B624
UFS_FWVER : 0300
BLOCK_SIZE: 0x0000001000 (4.00Kb)
UFS_LU0 : 0x0000400000 (4.00Mb)
UFS_LU1 : 0x0000400000 (4.00Mb)
UFS_LU2 : 0x1DCB000000 (119.17Gb)
RAM INFO:
INT_SRAM: 0x0000060000 (384.00Kb)
EXT_RAM : 0x0200000000 (8.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : Redmi
Product Manufacturer : Xiaomi
Product Model : viva
Product Name : viva_global
Product Device : viva
Product Board : viva
Board Platform : mt6781
Build ID : SP1A.210812.016
Build Date : Mon Feb 6 10:41:39 CST 2023
Display ID : viva-user 12 SP1A.210812.016 V13.0.6.0.SGDIVTBE
Security Patch : 2023-02-01
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : V13.0.6.0.SGDINGRVE
Userdata FS Type : F2FS
Read file "G:\d-ok\Xiaomi_Redmi Note 11 Pro 4G (Viva)\UFS_LU2_00000000_1DCB000000_(2024-9-9_23-11-43).bin"... error(8), skip
Saved to G:/d-ok/Xiaomi_Redmi%20Note%2011%20Pro%204G%20(Viva)/
Dumping done!
 
  • Like
Reactions: tsui_thomas

zishanwarsi

Active Member
May 7, 2019
51
21
PANDORA PRO 7.2 / 7.3 Update.

- Added support Bypass Authorization in EDL Mode for Xiaomi phones:
(supported models and functions will be expanded soon)

11 Lite 5G NE : Lisa
Mi 10 : Umi
Mi 10T /Mi 10T Pro/Redmi K30S Ultra: Apollo
Mi 11 : Venus
Mi 11X/Poco F3/Redmi K40 : Alioth
Mi 11X Pro/Mi 11i/Redmi K40 Pro : Haydn
Mi 9 Pro/Redmi Note 9 Pro : Joyeuse
Poco F4/Redmi K40S : Munch
Poco M2 Pro : Gram
Poco X3/Poco X3 NFC : Surya
Redmi Note 10 : Mojito
Redmi Note 11 : Spes
Redmi Note 12 4G : Tapas
Redmi Note 6 Pro : Tulip
Redmi Note 9 Pro Max : Excalibur

- Fixed some bugs with new 2024 sec Texno/Infinix phones
- Fixed some bugs with unlock phones with Unisoc
- Added automatic update DB with loaders and download necessary loader,
more loaders will be shortly uploaded
- Added support for Samsung phones:
(Write Firmware (XML)*, Read/Write*/Wipe Security, Read Info, Read Partitions,

Wipe Data, Factory Reset, Reset FRP, Change CSC, Repair SN)
SM-E025F Galaxy F02s (BIT 6)
SM-G770F Galaxy S10 Lite (BIT 9)
SM-G780G Galaxy S20 FE (BIT
SM-G781B Galaxy S20 FE 5G (BIT A)
SM-G781U Galaxy S20 FE 5G (BIT E)
SM-G781V Galaxy S20 FE 5G (BIT C)
SM-T295 Galaxy Tab A 8.0 (2019) (BIT 6)
SM-T505 Galaxy Tab A7 10.4 (2020) (BIT8)
SM-T595 Galaxy Tab A 10.5 (BIT 4)
SM-T725 Galaxy Tab S5e LTE (BIT 1)

- Added new loader for SM-G990U (BIT C), SM-G991U (BIT C), SM-G996U (BIT C), SM-G998U (BIT C)
- Added support for Mediatek phones:

Motorola Moto E6s XT2053-1/XT2053-2/XT2053-3/XT2053-4
Lenovo Tab P11 Gen 2 TB350FU, TB350XU

Added support:

- new security 2024 for Tecno phones
- new security 2024 for Infinix phones


Added support for Xiaomi phones:

- Poco C61 / Redmi A3 Blue
- Poco X6 Neo/Redmi Note 13 5G/Redmi Note 13R Pro Gold*


Added:

- support new security (DA) Redmi 13C/Poco C65 Gale


Added support for Huawei phones:

Huawei P50 Pro JAD-AL80/JAD-L09/JAD-L29/JAD-LX9
Huawei Mate Xs 2 PAL-AL00/PAL-AL10/PAL-L29/PAL-LX9
Huawei Nova 10 Youth JLN-AL00


List of supported function for Huawei phones: (Write Firmware (XML)*, Read/Write*/Wipe Security, Read Info, Read Partitions, Wipe Data, Factory Reset, Reset FRP, Reset Huawei ID, Repair/Reset Chip Damage)


Added support for:

- Oukitel OT5, Oukitel IIIF150 Air1 Ultra


Added support for:

- Tecno Pova 6 Pro LI9


Added support for Samsung phones:

- SM-C7000 Galaxy C7 (BIT 2)
SM-E556B Galaxy F55 5G (BIT 1)
SM-F711B Galaxy Z Flip3 5G (BIT 7)
SM-F711U Galaxy Z Flip3 5G (BIT 6)
SM-F721B Galaxy Z Flip4 (BIT 5)
SM-F721U Galaxy Z Flip4 (BIT 6)
SM-F731B Galaxy Z Flip5 5G (BIT 3)
SM-F731U Galaxy Z Flip5 5G (BIT 4)
SM-F916U Galaxy Fold2 5G (BIT 2)
SM-F926B Galaxy Fold3 5G (BIT 5)
SM-F926N Galaxy Fold3 5G (BIT 2)
SM-F926U Galaxy Fold3 5G (BIT 5)
SM-F936B Galaxy Fold4 (BIT 5)
SM-F936N Galaxy Fold4 (BIT 2)
SM-F936U Galaxy Fold4 (BIT 4)
SM-F946B Galaxy Z Fold5 (BIT 3)
SM-F946U Galaxy Z Fold5 (BIT 4)
SM-F956U Galaxy Z Fold6 (BIT 1)



List of supported function for Samsung phones: (Write Firmware (XML)*, Read/Write*/Wipe Security, Read Info, Read Partitions, Wipe Data, Factory Reset, Reset FRP, Change CSC, Repair SN)


Added support Unisoc based phones:

SC7731E:
HWCD100E Hisense U40 Lite, HWCD103E Hisense U50 Lite, HWCD108E Hisense U60 Lite, KS964 Hisense U3
W6501 Itel P36, W5504 Itel P33, W6001 Itel P33 Plus


SC9832E:
HLTE243E Hisense E33, HLTE106E Hisense E32 Lite, U607 Hisense U31, HLTE109E Hisense U70 Pro

SC9863A:
HLTE242E Hisense E32 Pro
A665L Itel A70


T606:
Tecno Pop 8 (BG6h, BG6i)


Added new loader for SM-S918B (BIT6)

Now supported BIT (for Samsung) showning by EDL loader


Fixed some exceptions
Z3X's entire product is very good but since last 1 year, no FRP update has happened in Z3X SAMSUNG TOOL, no FRP update has happened in Z3X SAMSUNG.

BRO......
ZISHANWRSI....
 
Top