Z3X Pandora PRO 6.8 Update

[SPYROS]

Pandora PRO 6.8 Update. Lot of new devices added.

Added support Bmobile devices:

- AX620, AX650, AX660, AX670, AX675, AX680, AX680+, AX681, AX683, AX685, AX690, AX700,
- AX705, AX710, AX745, AX750, AX751, AX753, AX754, AX800, AX810, AX822, AX823, AX826,
- AX830, AX905, AX921, AX922, AX925, AX926, AX950, AX951, AX959, AX960, AX1010, AX1020,
- AX1030, AX1035, AX1040, AX1045, AX1045E, AX1050, AX1055, AX1060, AX687, AX688, AX688+,
- AX715, AX751+, AX824, AX824 Lite, AX824A, AX824+, AX1100, BL55, BM65 Plus, AX1080,
- AX1085, AX1092, AX1095, B55, B55 Ultra, B60 Pro, B63 Pro, Bella, BL52T, BL60, BL60 Pro,
- N20266, X10


Added support Dexp phones:

- Ursus M170, Ursus N180i, Ursus N210, Ursus N280i, Ursus N310, Ursus N380i, Ursus N410,
- Ursus N570, Ursus N370, Ursus N470


Added support Mobicel phones:

- Zen, Zoom, Zoom H, Vivo Dual Sim, Vivo Single Sim, Venus Go, V1, V2, Rush, RX17, Sapphire,
- Samba, Scarlet, Shift, Smart Gem, Solo P9122, Solo Tab P9120, Sonic V20, Switch, Switch Go,
- Tango, Epic Pro 2, Epic Pro LTE


Added support Doogee phones:

- DK10, Flip X, R10, R20, S100, S100 Pro, S110, S mini, T20 Ultra, T30 Max, T30 Pro,
- T30 Ultra, V Max, V20 Pro, V20 Pro Ultra, V20S, V30, V30 Pro, V30T, V31GT, PT1, N50S,
- S98, S98 Pro, S99, T30S


Added support myPhone phones:

- myA1 Plus, myA17, myG1, myP1, myWX1 Lite, myXI1, myWX1 Plus, myWX2, myXI1 Plus, myXI1 Pro,
- myWX2 Pro, Pocket Pro


Added support BLU phones:

- C6L Max, Dash 4.5 2016, Dash 4.5 2016, G73, G53, G63, G33, J10L

Added support: Realme C51s


Fixed:

- Spreadtrum Nokia repair
- downgrading bootloaders for Xiaomi
- regional unlock Realme
- patch cert error Realme (error(2.ERR_SF_4))
- 'EXT4 REMAP SUPER FAIL' while reading info
- creating default fs
- some bugs


Mega: 180.85 MB file on MEGA

 

[saadshaikhsaadi]

uaeless update

 

[iftikharrana]

z3x teem like GPG teem lunch new box dongle
and all old is closse and dead
same this time z3x teem working LG box dead Samsung dead only pandora is update

 

[androimran786]

- Fixed 'EXT4 REMAP SUPER FAIL' while reading info
- Fixed downgrading bootloaders for Xiaomi
- Fixed regional unlock Realme
- Fixed patch cert error Realme (error(2.ERR_SF_4))
- Fixed creating default fs
- Fixed Spreadtrum Nokia repair
- Added support Realme C51s
- Added support Doogee phones:
DK10, Flip X, R10, R20, S100, S100 Pro, S110, S mini, T20 Ultra, T30 Max, T30 Pro,
T30 Ultra, V Max, V20 Pro, V20 Pro Ultra, V20S, V30, V30 Pro, V30T, V31GT, PT1, N50S,
S98, S98 Pro, S99, T30S
- Added support BLU phones:
C6L Max, Dash 4.5 2016, Dash 4.5 2016, G73, G53, G63, G33, J10L
- Added support Bmobile phones:
AX620, AX650, AX660, AX670, AX675, AX680, AX680+, AX681, AX683, AX685, AX690, AX700,
AX705, AX710, AX745, AX750, AX751, AX753, AX754, AX800, AX810, AX822, AX823, AX826,
AX830, AX905, AX921, AX922, AX925, AX926, AX950, AX951, AX959, AX960, AX1010, AX1020,
AX1030, AX1035, AX1040, AX1045, AX1045E, AX1050, AX1055, AX1060, AX687, AX688, AX688+,
AX715, AX751+, AX824, AX824 Lite, AX824A, AX824+, AX1100, BL55, BM65 Plus, AX1080,
AX1085, AX1092, AX1095, B55, B55 Ultra, B60 Pro, B63 Pro, Bella, BL52T, BL60, BL60 Pro,
N20266, X10
- Added support Dexp phones:
Ursus M170, Ursus N180i, Ursus N210, Ursus N280i, Ursus N310, Ursus N380i, Ursus N410,
Ursus N570, Ursus N370, Ursus N470
- Added support Mobicel phones:
Zen, Zoom, Zoom H, Vivo Dual Sim, Vivo Single Sim, Venus Go, V1, V2, Rush, RX17, Sapphire,
Samba, Scarlet, Shift, Smart Gem, Solo P9122, Solo Tab P9120, Sonic V20, Switch, Switch Go,
Tango, Epic Pro 2, Epic Pro LTE
- Added support myPhone phones:
myA1 Plus, myA17, myG1, myP1, myWX1 Lite, myXI1, myWX1 Plus, myWX2, myXI1 Plus, myXI1 Pro,
myWX2 Pro, Pocket Pro
- Fixed some bugs
Mega: https://mega.nz/file/DW4WhBaQ...

Please Add Vivo X100 Pro

 

[nabeel4530]

very chep update very bad
z3x LG samsung dead long time ig update chep
i am werred big amount investment pandora and z3x box

 

[samsameer]

very chep update very bad
z3x LG samsung dead long time ig update chep
i am werred big amount investment pandora and z3x box

how to pandora box oppo petch impossible plzz help..........

 

[SRZKS]

2024 sec still missing team .... waiting for quality update

 

[GsmToto]

Selected model: Xiaomi Redmi 13C (Gale)
Operation: Flash (Upgrade)
Software version: 6.8
If BROM was disabled and you want write preloader partition not compatible for this model, phone will bricked. Recovery possible only with ISP mode.
Continue? YES

Parse scatter file... OK
Load Rom Images... OK
Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V2023 (Android),usb2ser_mtk.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000007]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x25DE0F4D, 0x0D0E0B0B, 0x1416118E, 0x2B5EA182
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... error(DA_INIT_KEY_FAIL). Secure DA agent not compatible for this preloader.
Advanced Authorization (Preloader) not supported for this preloader version

 

[GsmToto]

elected model: Mediatek Mediatek
Operation: Erase FRP And Wipe
Software version: 6.8
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1633,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1633,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xFBACC850, 0x283C1DD3, 0x9FA91086, 0x9AD97436
Get Chip ID... [MT6761]
Get SOC ID... [70178B470065DC68520802A5339A280E25CEBE0BF68BC6F87B 349B0E1A5247C5]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x7001004432363033321001C59D69A778
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: D26032
EMMC_ID : 0x7001004432363033321001C59D69A7789
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0750000000 (29.25Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : Infinix
Product Manufacturer : INFINIX MOBILITY LIMITED
Product Model : Infinix X657C
Product Name : X657C-GL
Product Device : Infinix-X657C
Product Board : Infinix-X657C
Board Platform : mt6761
Build ID : QP1A.190711.020
Build Date : Tue Feb 15 17:01:45 CST 2022
Display ID : X657C-H6117GH-QGo-GL-220215V300
Security Patch : 2022-02-05
Version SDK : 29
Version Release : 10
Version Codename : REL
Firmware Version : GH-GL-220215V300
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Mediatek_MT6761/FRP_BACKUP_(2024-4-18_03-33-55)/
Writting FRP data... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Formatting "md_udc" partition... OK
Creating default filesystems... [USERDATA: EXT4] ... [CACHE: EXT4] ... [METADATA: EXT4] ... [MD_UDC: EXT4] ... OK
Wipe data done!

 

[Afzaalgsm]

Hello pendora Team,
infinix Note 30 X6833B frp fail kindly fix this bugs

 

[Afzaalgsm]

Hello pendora Team,
infinix Note 30 X6833B frp fail kindly fix this bugs

 

[Afzaalgsm]

Hello pendora Team,
infinix Note 30 X6833B frp fail kindly fix this bugs

 

[GsmToto]

Selected model: Mediatek Mediatek
Operation: Erase FRP And Wipe
Software versión: 6.8
frp honor x8a

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0707
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xBB1101DC, 0xEBD15A41, 0xFC5484CC, 0x0E9E5CC3
Get Chip ID... [MT6768]
Get SOC ID... [D4DE28639C78CB56EA2895136BCA14DD18299D2C61056377D9 9C54CA4D813D7F]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [8]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x9B0100593053323536000C314FA19A5A
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: Y0S256
EMMC_ID : 0x9B0100593053323536000C314FA19A5D
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x3A3E000000 (232,97Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : HONOR
Product Manufacturer : alps
Product Model : k69v1_64_6382_k419
Product Name : vnd_k69v1_64_6382_k419
Product Device : HNCRT-M1
Product Board : CRTL
Board Platform : mt6768
Build ID : SKQ1.210908.001
Build Date : Thu Aug 31 20:48:00 CST 2023
Display ID : System 6.1.0(0K6I)
Security Patch : 2023-09-01
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : eng.root.20230831.202248
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Mediatek_MT6768/FRP_BACKUP_(2024-4-19_13-22-54)/
Writting FRP data... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Formatting "md_udc" partition... OK
Wipe data done!

 

[saadshaikhsaadi]

team update about vivo new security frp patched

 

[GsmToto]

Selected model: Infinix X665C (Infinix Hot 20i)
Operation: Erase FRP And Wipe
Software version: 6.8
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES
Work ID: 27443311

Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM5 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM5 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x115EFC0B, 0xE4962BC4, 0xE423E54B, 0x92F4AA15
Get Chip ID... [MT6765]
Get SOC ID... [C7F2194F11E3E9D27D00EA9F9816E6ED8C1ABA5758718D4B34 24B261E8914BC2]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xF4012241524A3131581046CC0357C93G
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: ARJ11X
EMMC_ID : 0xF4012241524A3131581046CC0357C93G
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0748000000 (29.13Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x00C0000000 (3.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : TCL
Product Manufacturer : TCL
Product Model : 6102H
Product Name : 6102H_EEA
Product Device : Cruze_Lite_S
Product Board : MT6762
Board Platform : mt6765
Build ID : SP1A.210812.016
Build Date : Thu Feb 29 19:33:23 CST 2024
Display ID : SP1A.210812.016 release-keys
Security Patch : 2024-02-01
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : NADM
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Infinix_X665C%20(Infinix%20Hot%2020i)/FRP_BACKUP_(2024-4-20_19-33-12)/
Writting FRP data... OK
Formatting "userdata" partition... OK
Formatting "metadata" partition... OK
Formatting "md_udc" partition... OK
Wipe data done!

 

[GsmToto]

Selected model: Tecno LH7n (Tecno Pova 5)
Operation: Eliminar FRP
Software version: 6.8

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 1208
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6789]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xB4ED52F1, 0x6E2B61C8, 0x58803F6C, 0x8A5F3AD1
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... OK
Start bootloader... OK
Setup device enviroment... OK
Setup device parametres... OK
Get device info... OK
UFS CID (FW VER): eUFS2.2_256 ()
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [0]
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : eUFS2.2_256
UFS_FWVER :
BLOCK_SIZE: 0x0000001000 (4,00Kb)
UFS_LU0 : 0x0000400000 (4,00Mb)
UFS_LU1 : 0x0000400000 (4,00Mb)
UFS_LU2 : 0x3BAD800000 (238,71Gb)
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO
Product Model : TECNO LH7n
Product Name : LH7n-GL
Product Device : TECNO-LH7n
Product Board : mgvi_64_nfc_armv82
Board Platform : common
Build ID : SP1A.210812.016
Build Date : Wed Nov 22 16:13:15 CST 2023
Display ID : TECNO-T-64-ARMV82-231122V945
Security Patch : 2023-11-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 231122V1280
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Tecno_LH7n%20(Tecno%20Pova%205)/FRP_BACKUP_(2024-4-21_18-26-38)/
Writting FRP data... OK
Erase FRP done!

 

[GsmToto]

Selected model: Vivo V2253 (Vivo T2x 5G)
Operation: Erase FRP And Wipe
Software version: 6.8
Work ID: 2633444265


Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 1229
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0001, HW SUB CODE: 8A00
Detect chip [MT6886]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x9F9C8914, 0x04E8DAFF, 0xF52172D2, 0x98FFCCB3
Load DownloadAgent... OK
Search DA... not found
Advanced Authorization (Preloader) not supported for this CPU

 

[GsmToto]

Selected model: Tecno LH7n (Tecno Pova 5)
Operation: Eliminar FRP
Software version: 6.8

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 1208
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6789]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xB4ED52F1, 0x6E2B61C8, 0x58803F6C, 0x8A5F3AD1
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... OK
Start bootloader... OK
Setup device enviroment... OK
Setup device parametres... OK
Get device info... OK
UFS CID (FW VER): eUFS2.2_256 ()
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [0]
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : eUFS2.2_256
UFS_FWVER :
BLOCK_SIZE: 0x0000001000 (4,00Kb)
UFS_LU0 : 0x0000400000 (4,00Mb)
UFS_LU1 : 0x0000400000 (4,00Mb)
UFS_LU2 : 0x3BAD800000 (238,71Gb)
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO
Product Model : TECNO LH7n
Product Name : LH7n-GL
Product Device : TECNO-LH7n
Product Board : mgvi_64_nfc_armv82
Board Platform : common
Build ID : SP1A.210812.016
Build Date : Wed Nov 22 16:13:15 CST 2023
Display ID : TECNO-T-64-ARMV82-231122V945
Security Patch : 2023-11-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 231122V1280
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Tecno_LH7n%20(Tecno%20Pova%205)/FRP_BACKUP_(2024-4-21_19-68-38)/
Writting FRP data... OK
Erase FRP done!

 

[GsmToto]

Selected model: Nokia TA-1380 (Nokia C1 2nd Edition)
Operation: Repair
Software version: 6.8

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to NONE... OK
Connect phone to [PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM3
Port: USB\VID_1782&PID_4D00\6&E72CEE4&0&1
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: SC7731E
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: P281122241010333
Read partitions info... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : Nokia
Product Manufacturer : HMD Global
Product Model : Nokia C1 2nd Edition
Product Device : IRU
Product Board : Irisumts
Board Platform : sp7731e
Build ID : RP1A.201005.001
Build Date : Thu Oct 13 10:48:53 CST 2022
Security Patch : 2022-10-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 41410
Userdata FS Type : F2FS
Check security state... OK [1]
Unlock bootloader... OK
Patch modem check... already patched,skip
Patch cert... OK
Done!

 

[GsmToto]

Selected model: OPPO CPH2579 (Oppo A38)
Operation: Unlock network
Software version: 6.8

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xBF5127CE, 0xEEE8168C, 0x33D5D9BE, 0xFD20BF43
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
EMMC_ID: 0x150100445554423432029172E84F8A73
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [8]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DUTB42
EMMC_ID : 0x150100445554423432029172E84F8A73
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x1D1EC00000 (116.48Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : OPPO
Product Manufacturer : OPPO
Product Model : CPH2579
Product Name : CPH2579
Product Device : OP5759L1
Product Board : k69v1_64_k419
Board Platform : mt6768
Build ID : TP1A.220905.001
Build Date : Thu Mar 7 21:54:49 CST 2024
Display ID : CPH2579_13.1.1.633(EX01)
Security Patch : 2024-03-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : T.R4T2.16d967b_1
Read security partition from phone... OK
Read security files... OK
Read NVDATA files... OK
Calculating... OK
Read lock info... OK
Read partition "nvdata"... OK
Read partition "protect1"... OK
Read security files... OK
Read NVDATA files... OK
Read IMEI... OK
Unlock... OK [DF1, DF2, GB1, GB2, SM]
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!