UMT UMT Box / PRO Modules Updates Here
- Thread starter SPYROS
- Start date
UMT Box
USING PL_EXLOIT [VIVO V3]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM7)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&1e6a4af9&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6877 [0959] Dimensity 900
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 286DC2F356F48C77DEA10DE6F0CCA9AD
SoC ID[0] : 959BF88050B9AD0A3CD75002AEA9EE8X
SoC ID[1] : 9AE3C94BD758D57AE004722805CA979X
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
Running PL_EXPLOIT [2]...Done
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000200000000 [8.00 GB]
Flash ID : KM8V9001JM-B81
CID : CE014B4D3856393030314A4D2D423822
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000001DCB000000 [119.17 GB]
PRE EOL : NORMAL
Life. Est.A : 20%-30% LIFE TIME USED
Life. Est.B : 20%-30% LIFE TIME USED
Reading Partition Table...OK
Prod. Model : PD2167F_EX
And. Ver. : 13
Prod. Ver. : PD2167F_EX_A_13.1.15.31.W30
Hw. Ver. : PD2167F_EXMA
Build Dt. : Fri Jan 19 16:06:46 CST 2024
Display ID : TP1A.220624.014 release-keys
Ver. Inc. : eng.compil.20240119.161800
Locale : en-US
Patch : 2024-01-01
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 2853575433_18447134.log
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM7)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&1e6a4af9&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6877 [0959] Dimensity 900
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 286DC2F356F48C77DEA10DE6F0CCA9AD
SoC ID[0] : 959BF88050B9AD0A3CD75002AEA9EE8X
SoC ID[1] : 9AE3C94BD758D57AE004722805CA979X
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
Running PL_EXPLOIT [2]...Done
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000200000000 [8.00 GB]
Flash ID : KM8V9001JM-B81
CID : CE014B4D3856393030314A4D2D423822
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000001DCB000000 [119.17 GB]
PRE EOL : NORMAL
Life. Est.A : 20%-30% LIFE TIME USED
Life. Est.B : 20%-30% LIFE TIME USED
Reading Partition Table...OK
Prod. Model : PD2167F_EX
And. Ver. : 13
Prod. Ver. : PD2167F_EX_A_13.1.15.31.W30
Hw. Ver. : PD2167F_EXMA
Build Dt. : Fri Jan 19 16:06:46 CST 2024
Display ID : TP1A.220624.014 release-keys
Ver. Inc. : eng.compil.20240119.161800
Locale : en-US
Patch : 2024-01-01
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 2853575433_18447134.log
Model : Samsung
Operation : FRP Bypass [2023 New Method]
Searching for Phone...Found
Hw ID : USB\VID_04E8&PID_6860&REV_0400&Modem
Port: : COM7 : SAMSUNG Mobile USB Modem #8
Checking for Device...Found [Normal Mode]
Reading Phone Information...OK
Model: : SM-A305G
IMEI: : 354xxxxxxxxxxxx
Software: : A305GUBU2ASJ1/A305GOWO2ASJ2/A305GDXU2ASJ1/A305GUBU2ASJ1
Product : BVO
Enabling ADB (2023 New Method)...OK
Searching for Device...Found
Brand : samsung
Model : SM-A305G
Product : a30
Device : a30
Andriod Ver. : 9
Patch Level : 2019-10-01
PDA : A305GUBU2ASJ1
Bootloader : A305GUBU2ASJ1
Build ID : PPR1.180610.011.A305GUBU2ASJ1
Build Date : Thu Oct 10 23:26:29 KST 2019
Checking Root Status...Done
Root : No Root
Resetting FRP Lock...Done
HINT : This method work for QC/Exynos model with Security Patch < June 2023
Elapsed Time 58:37
[UltimateSams v0.7]
Saved to Logs\27397633_17841123.log
Operation : FRP Bypass [2023 New Method]
Searching for Phone...Found
Hw ID : USB\VID_04E8&PID_6860&REV_0400&Modem
Port: : COM7 : SAMSUNG Mobile USB Modem #8
Checking for Device...Found [Normal Mode]
Reading Phone Information...OK
Model: : SM-A305G
IMEI: : 354xxxxxxxxxxxx
Software: : A305GUBU2ASJ1/A305GOWO2ASJ2/A305GDXU2ASJ1/A305GUBU2ASJ1
Product : BVO
Enabling ADB (2023 New Method)...OK
Searching for Device...Found
Brand : samsung
Model : SM-A305G
Product : a30
Device : a30
Andriod Ver. : 9
Patch Level : 2019-10-01
PDA : A305GUBU2ASJ1
Bootloader : A305GUBU2ASJ1
Build ID : PPR1.180610.011.A305GUBU2ASJ1
Build Date : Thu Oct 10 23:26:29 KST 2019
Checking Root Status...Done
Root : No Root
Resetting FRP Lock...Done
HINT : This method work for QC/Exynos model with Security Patch < June 2023
Elapsed Time 58:37
[UltimateSams v0.7]
Saved to Logs\27397633_17841123.log
Device : Samsung Galaxy Z Flip4 (SM-F721U) BIT4
Operation : Samsung Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...Done
Protocol v3 or higher detected. Auto Loader unsupported.
Initializing Protocol...OK
Using Pre-Defined Loader [SM-F721U_BIT4.ufl]
Preparing Loader...Done
Sending Loader [SM-F721U_BIT4]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : , UFS, 256 GB
LU Count : 6 [0x03B6B400] [0x00000800] [0x00000800] [0x00000400] [0x00028000] [0x00001000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK [Sign]
Build : F721WVLS4EXAD
Int. Build : SM-F721W_NA_XAC_QKEY0
Reset FRP... Done
Operation Finished.
QcFire Ver. 9.4
Operation : Samsung Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...Done
Protocol v3 or higher detected. Auto Loader unsupported.
Initializing Protocol...OK
Using Pre-Defined Loader [SM-F721U_BIT4.ufl]
Preparing Loader...Done
Sending Loader [SM-F721U_BIT4]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : , UFS, 256 GB
LU Count : 6 [0x03B6B400] [0x00000800] [0x00000800] [0x00000400] [0x00028000] [0x00001000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK [Sign]
Build : F721WVLS4EXAD
Int. Build : SM-F721W_NA_XAC_QKEY0
Reset FRP... Done
Operation Finished.
QcFire Ver. 9.4
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek USB Port (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&237d5c64&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.2.0.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 3E2AC6510CDB0DA70EC12CF4276C9C7E
SoC ID[0] : 1FBE2737357CF74CF72ADEA6B5B8CF35
SoC ID[1] : F96BA84E3EB430C64FAFFC9C930FDB18
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_water.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 9B0100593250303332006446206C999F [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000038000 [224,00 KB]
Ext. RAM : 0x0000000080000000 [2,00 GB]
Flash ID : Y2P032
CID : 9B0100593250303332006446206C999F
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000000747C00000 [29,12 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 2577240_1486225.log
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek USB Port (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&237d5c64&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.2.0.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 3E2AC6510CDB0DA70EC12CF4276C9C7E
SoC ID[0] : 1FBE2737357CF74CF72ADEA6B5B8CF35
SoC ID[1] : F96BA84E3EB430C64FAFFC9C930FDB18
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_water.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 9B0100593250303332006446206C999F [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000038000 [224,00 KB]
Ext. RAM : 0x0000000080000000 [2,00 GB]
Flash ID : Y2P032
CID : 9B0100593250303332006446206C999F
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000000747C00000 [29,12 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 2577240_1486225.log
Brand/Model : *Auto* / *Auto Detect*
Operation : IMEI Repair (Oppo Method)
Waiting for Device...Found
Port : MediaTek USB Port (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&39e6a57&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 30EB5CD9F1CCAD9F8825E8D45943E597
SoC ID[0] : 21BD85F2CCC41AA4D9395B422DBE9C81
SoC ID[1] : AAB6869B919200A1A712446B915A814D
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_oppo6765_18511.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 90014A68423861503E03AD01854D76F9 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x00000000C0000000 [3.00 GB]
Flash ID : hB8aP>
CID : 90014A68423861503E03AD01854D76F9
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
PRE EOL : NORMAL
Life. Est.A : UNDEFINED
Life. Est.B : 80%-90% LIFE TIME USED
Reading Partition Table...OK
Manuf. : OPPO
And. Ver. : 8.1.0
Locale : en-US
Patch : 2021-04-05
Bootloader : UNLOCKED
Reading nvdata..OK
Reading nvram..OK
Backup saved as C:\UMTool\UltimateMTK2\Preloader\111.zip
IMEI1 : 86XXXXXXXXXXXX
IMEI2 : 86XXXXXXXXXXXX
Repairing Security...OK
Fixing Network Data...Not Found!
Possibly already patched.
Disabling Signature Check..Failed!/Ignored!
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 25633212_1844532.log
Operation : IMEI Repair (Oppo Method)
Waiting for Device...Found
Port : MediaTek USB Port (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&39e6a57&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 30EB5CD9F1CCAD9F8825E8D45943E597
SoC ID[0] : 21BD85F2CCC41AA4D9395B422DBE9C81
SoC ID[1] : AAB6869B919200A1A712446B915A814D
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_oppo6765_18511.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 90014A68423861503E03AD01854D76F9 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x00000000C0000000 [3.00 GB]
Flash ID : hB8aP>
CID : 90014A68423861503E03AD01854D76F9
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
PRE EOL : NORMAL
Life. Est.A : UNDEFINED
Life. Est.B : 80%-90% LIFE TIME USED
Reading Partition Table...OK
Manuf. : OPPO
And. Ver. : 8.1.0
Locale : en-US
Patch : 2021-04-05
Bootloader : UNLOCKED
Reading nvdata..OK
Reading nvram..OK
Backup saved as C:\UMTool\UltimateMTK2\Preloader\111.zip
IMEI1 : 86XXXXXXXXXXXX
IMEI2 : 86XXXXXXXXXXXX
Repairing Security...OK
Fixing Network Data...Not Found!
Possibly already patched.
Disabling Signature Check..Failed!/Ignored!
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 25633212_1844532.log
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek USB Port (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&237d5c64&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.2.0.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 5D7A72DA90531DA198B0BB5D73BD884E
SoC ID[0] : CE0ED8D19BAC064C5DF189FAB56489FX
SoC ID[1] : E9D898D43ECFB54AB1E206CB0CC7BC8X
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_lancelot.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 150100445036444142032D69CB00571B [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000070000 [448,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : DP6DAB
CID : 150100445036444142032D69CB00571B
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000000E8F800000 [58,24 GB]
PRE EOL : NORMAL
Life. Est.A : 50%-60% LIFE TIME USED
Life. Est.B : 20%-30% LIFE TIME USED
Reading Partition Table...OK
Manuf. : Xiaomi
And. Ver. : 12
Build Dt. : Tue Nov 15 11:38:52 CST 2022
Display ID : SP1A.210812.016
Ver. Inc. : V13.0.2.0.SJCMIXM
Locale : en-GB
Mod. Dev. : lancelot_global
Patch : 2022-10-01
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 24356722_1722341.log
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek USB Port (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&237d5c64&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.2.0.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 5D7A72DA90531DA198B0BB5D73BD884E
SoC ID[0] : CE0ED8D19BAC064C5DF189FAB56489FX
SoC ID[1] : E9D898D43ECFB54AB1E206CB0CC7BC8X
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_lancelot.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 150100445036444142032D69CB00571B [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000070000 [448,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : DP6DAB
CID : 150100445036444142032D69CB00571B
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000000E8F800000 [58,24 GB]
PRE EOL : NORMAL
Life. Est.A : 50%-60% LIFE TIME USED
Life. Est.B : 20%-30% LIFE TIME USED
Reading Partition Table...OK
Manuf. : Xiaomi
And. Ver. : 12
Build Dt. : Tue Nov 15 11:38:52 CST 2022
Display ID : SP1A.210812.016
Ver. Inc. : V13.0.2.0.SJCMIXM
Locale : en-GB
Mod. Dev. : lancelot_global
Patch : 2022-10-01
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 24356722_1722341.log
Device : Samsung Galaxy S23 Ultra 5G (SM-S918B) U3
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...Done
Protocol v3 or higher detected. Auto Loader unsupported.
Initializing Protocol...OK
Using Pre-Defined Loader [SMS918B_U3.ufl]
Preparing Loader...Done
Sending Loader [SMS918B_U3]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : , UFS, 512 GB
LU Count : 6 [0x076FA000] [0x00001400] [0x00001400] [0x00002000] [0x00028000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4093
Reading Partition Table...OK
Reading Device Information...OK [Sign]
Build : S918BXXS3AWIF
Int. Build : SM-S918B_EUR_XX_QKEY6
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 9.4
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...Done
Protocol v3 or higher detected. Auto Loader unsupported.
Initializing Protocol...OK
Using Pre-Defined Loader [SMS918B_U3.ufl]
Preparing Loader...Done
Sending Loader [SMS918B_U3]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : , UFS, 512 GB
LU Count : 6 [0x076FA000] [0x00001400] [0x00001400] [0x00002000] [0x00028000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4093
Reading Partition Table...OK
Reading Device Information...OK [Sign]
Build : S918BXXS3AWIF
Int. Build : SM-S918B_EUR_XX_QKEY6
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 9.4
Job: Remove FRP
SELECTED: 50i Prime
ACTION: Erase FRP
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM3)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
UID: 0074198506209033
FileSystem: UFS
Read partition info is supported by loader.
XXXXXXXXXXXXXXXXX
Manufacturer: realme
Brand: realme
Device: RE54D8L1
Model: RMX3516
Build ID: SP1A.210812.016
CPU arhitecture: arm64-v8y
Build product name: ums9230_nico
Build description: ums9230_nico_Natv-user 12 SP1A.210812.016 1284 release-keys
Build Id: SP1A.210812.016
Android Release: 12
Android Version: RMX3516PU_12_C.33
Security patch: 2023-09-05
CPU NAME: T612
Removing frp, wait...
[1]FRP: persist
Format OK.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\UMT\unisoc_module\spreadtrum_module_backup_fold er\Saved_Logs\realme_RMX3516PU_12_C_33_erase_frp.t xt
Total Time: 00:00:25
Done.
SELECTED: 50i Prime
ACTION: Erase FRP
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM3)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
UID: 0074198506209033
FileSystem: UFS
Read partition info is supported by loader.
XXXXXXXXXXXXXXXXX
Build ID: SP1A.210812.016
CPU arhitecture: arm64-v8y
Build product name: ums9230_nico
Build description: ums9230_nico_Natv-user 12 SP1A.210812.016 1284 release-keys
Build Id: SP1A.210812.016
Android Release: 12
Android Version: RMX3516PU_12_C.33
Security patch: 2023-09-05
CPU NAME: T612
Removing frp, wait...
[1]FRP: persist
Format OK.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\UMT\unisoc_module\spreadtrum_module_backup_fold er\Saved_Logs\realme_RMX3516PU_12_C_33_erase_frp.t xt
Total Time: 00:00:25
Done.
Hi, Bro GSMtoto, we would like adverstise our NEW A12+ Bypass with Signal ( NOT iRemoval Pro ) please contact us on telegram OTIX BRO’S our posting getting rejected everytime here
Model : Samsung
Operation : FRP Bypass [2023 Method]
Searching for Phone...Found
Hw ID : USB\VID_04E8&PID_6860&REV_0400&Modem
Port: : COM3 : SAMSUNG Mobile USB Modem #15
Checking for Device...Found [Normal Mode]
Reading Phone Information...OK
Model: : SM-J710MN
IMEI: : 35XXXXXXXXXXXXXX
Software: : J710MNUBS4CTF5/J710MNUUB4CSJ1/J710MNUBS4CTE2/J710MNUBS4CTF5
Product : TTT
HINT : This method work for QC/Exynos model with Security Patch < May 2023
Enabling ADB (2023)...OK
Searching for Device...Found
Brand : samsung
Model : SM-J710MN
Product : j7xelte
Device : j7xelte
Andriod Ver. : 8.1.0
Patch Level : 2020-05-01
PDA : J710MNUBS4CTF5
Bootloader : J710MNUBS4CTF5
Build ID : M1AJQ.J710MNUBS4CTF5
Build Date : Mon Jun 22 21:42:09 KST 2020
Checking Root Status...Done
Root : No Root
Resetting FRP Lock...Done
HINT : This method work for QC/Exynos model with Security Patch < May 2023
Elapsed Time 22:55
[UltimateSams v0.7]
Saved to Logs\274245233_1426711.log
Operation : FRP Bypass [2023 Method]
Searching for Phone...Found
Hw ID : USB\VID_04E8&PID_6860&REV_0400&Modem
Port: : COM3 : SAMSUNG Mobile USB Modem #15
Checking for Device...Found [Normal Mode]
Reading Phone Information...OK
Model: : SM-J710MN
IMEI: : 35XXXXXXXXXXXXXX
Software: : J710MNUBS4CTF5/J710MNUUB4CSJ1/J710MNUBS4CTE2/J710MNUBS4CTF5
Product : TTT
HINT : This method work for QC/Exynos model with Security Patch < May 2023
Enabling ADB (2023)...OK
Searching for Device...Found
Brand : samsung
Model : SM-J710MN
Product : j7xelte
Device : j7xelte
Andriod Ver. : 8.1.0
Patch Level : 2020-05-01
PDA : J710MNUBS4CTF5
Bootloader : J710MNUBS4CTF5
Build ID : M1AJQ.J710MNUBS4CTF5
Build Date : Mon Jun 22 21:42:09 KST 2020
Checking Root Status...Done
Root : No Root
Resetting FRP Lock...Done
HINT : This method work for QC/Exynos model with Security Patch < May 2023
Elapsed Time 22:55
[UltimateSams v0.7]
Saved to Logs\274245233_1426711.log
USING PL_EXLOIT [INFINIX V3]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&237d5c64&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.2.0.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6833 [0989] Dimensity 700 5G k6833
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : B949A1B4BC1F97192B989A501962AAA3
SoC ID[0] : 69B00085FC291A2AE101DB72A6F48D34
SoC ID[1] : 1384EDF88EE1DB13F31D85C52F01DEA3
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Int. RAM : 0x0000000000070000 [448,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : KM8F9001JM-B81
CID : CE014B4D3846393030314A4D2D423836
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000000400000 [4,00 MB]
USERAREA : 0x0000003B96000000 [238,34 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 26734552_1663321.log
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&237d5c64&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.2.0.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6833 [0989] Dimensity 700 5G k6833
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : B949A1B4BC1F97192B989A501962AAA3
SoC ID[0] : 69B00085FC291A2AE101DB72A6F48D34
SoC ID[1] : 1384EDF88EE1DB13F31D85C52F01DEA3
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Int. RAM : 0x0000000000070000 [448,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : KM8F9001JM-B81
CID : CE014B4D3846393030314A4D2D423836
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000000400000 [4,00 MB]
USERAREA : 0x0000003B96000000 [238,34 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 26734552_1663321.log
Model : Samsung
Operation : FRP Bypass [2023 New Method]
Searching for Phone...Found
Hw ID : USB\VID_04E8&PID_6860&REV_0400&Modem
Port: : COM3 : SAMSUNG Mobile USB Modem #16
Checking for Device...Found [Normal Mode]
Reading Phone Information...OK
Model: : SM-A105M
IMEI: : 35XXXXXXXXXXXX
Software: : A105MUBS8CWA1/A105MOWO8CVG4/A105MUBS8CVL1/A105MUBS8CWA5
Product : BVO
Enabling ADB (2023 New Method)...OK
Searching for Device...Found
Brand : samsung
Model : SM-A105M
Product : a10
Device : a10
Andriod Ver. : 11
Patch Level : 2023-01-01
PDA : A105MUBS8CWA1
Bootloader : A105MUBS8CWA5
Build ID : RP1A.200720.012.A105MUBS8CWA1
Build Date : Tue Jan 10 05:24:07 KST 2023
Checking Root Status...Done
Root : No Root
Resetting FRP Lock...Done
HINT : This method work for QC/Exynos model with Security Patch < June 2023
Elapsed Time 48:07
[UltimateSams v0.7]
Saved to Logs\28423455_14342236.log
Operation : FRP Bypass [2023 New Method]
Searching for Phone...Found
Hw ID : USB\VID_04E8&PID_6860&REV_0400&Modem
Port: : COM3 : SAMSUNG Mobile USB Modem #16
Checking for Device...Found [Normal Mode]
Reading Phone Information...OK
Model: : SM-A105M
IMEI: : 35XXXXXXXXXXXX
Software: : A105MUBS8CWA1/A105MOWO8CVG4/A105MUBS8CVL1/A105MUBS8CWA5
Product : BVO
Enabling ADB (2023 New Method)...OK
Searching for Device...Found
Brand : samsung
Model : SM-A105M
Product : a10
Device : a10
Andriod Ver. : 11
Patch Level : 2023-01-01
PDA : A105MUBS8CWA1
Bootloader : A105MUBS8CWA5
Build ID : RP1A.200720.012.A105MUBS8CWA1
Build Date : Tue Jan 10 05:24:07 KST 2023
Checking Root Status...Done
Root : No Root
Resetting FRP Lock...Done
HINT : This method work for QC/Exynos model with Security Patch < June 2023
Elapsed Time 48:07
[UltimateSams v0.7]
Saved to Logs\28423455_14342236.log
Model : MediaTek FRP
Operation : All MediaTek 2023
Searching for Phone...Found
Port: : COM4 : SAMSUNG Mobile USB Modem #2
Checking for Device...Found [Download Mode]
Reading Data from Phone...Done
Chipset : MTK6769T [HiSpeed]
Closing Session...Done
Port: : COM22 : SAMSUNG Mobile USB Modem #2
Checking for Device...Found [Download Mode]
Resetting FRP Data...Done
Closing Session...Done
Operation Finished.
Elapsed Time 00:24
[UltimateSams v0.7]
Saved to Logs\2724421_13689552.log
Operation : All MediaTek 2023
Searching for Phone...Found
Port: : COM4 : SAMSUNG Mobile USB Modem #2
Checking for Device...Found [Download Mode]
Reading Data from Phone...Done
Chipset : MTK6769T [HiSpeed]
Closing Session...Done
Port: : COM22 : SAMSUNG Mobile USB Modem #2
Checking for Device...Found [Download Mode]
Resetting FRP Data...Done
Closing Session...Done
Operation Finished.
Elapsed Time 00:24
[UltimateSams v0.7]
Saved to Logs\2724421_13689552.log
ob: Remove FRP
SELECTED: Tiger T606
ACTION: Erase FRP
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM3)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
UID: 047426072a2ad412
FileSystem: UFS
Read partition info is supported by loader.
CPU NAME: T606
Removing frp, wait...
[1]FRP: persist
Format OK.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
D:\UMT\unisoc_module\spreadtrum_module_backup_fold er\Saved_Logs\_erase_frp_1.txt
Total Time: 00:00:55
Done.
SELECTED: Tiger T606
ACTION: Erase FRP
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM3)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
UID: 047426072a2ad412
FileSystem: UFS
Read partition info is supported by loader.
CPU NAME: T606
Removing frp, wait...
[1]FRP: persist
Format OK.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
D:\UMT\unisoc_module\spreadtrum_module_backup_fold er\Saved_Logs\_erase_frp_1.txt
Total Time: 00:00:55
Done.
USING PL_EXLOIT [INFINIX V3]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&94b8c27&0&6#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : EA68BBE2140A0C1BB84AD18467FE2258
SoC ID[0] : CD6925F6974DFD428A059D74396B6E63
SoC ID[1] : 043B6A6BC310022D9645E11272A1859A
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : DP6DBB
CID : 15010044503644424202111CF2172943
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 2357411_0115821.log
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&94b8c27&0&6#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : EA68BBE2140A0C1BB84AD18467FE2258
SoC ID[0] : CD6925F6974DFD428A059D74396B6E63
SoC ID[1] : 043B6A6BC310022D9645E11272A1859A
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : DP6DBB
CID : 15010044503644424202111CF2172943
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 2357411_0115821.log
Brand/Model : Xiaomi / Redmi 9C NFC
Operation : IMEI Repair (Xiaomi Method-Redmi 9A (dandelion))
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&25797fd1&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 1649B4BC0A2DB0B6D2F7F5F8C9A27428
SoC ID[0] : 6A528A205AD804408FEDCD81942EF847
SoC ID[1] : DECF6056E92B8FA79563A6952ACE0D15
Running Exploit...
Installing LibUsb Filter Driver...OKDone
Preloader : preloader_k62v1_64_bsp.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 450100444134303634016381022569F5 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : DA4064
CID : 450100444134303634016381022569F5
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Manuf. : Xiaomi
And. Ver. : 11
Build Dt. : Wed Jul 27 21:08:32 CST 2022
Display ID : RP1A.200720.011
Ver. Inc. : V12.5.6.0.RCDMIXM
Locale : en-GB
Mod. Dev. : dandelion_global
Patch : 2022-07-01
Bootloader : UNLOCKED
Reading nvdata..OK
Reading nvram..OK
Backup saved as H:\UMT Read\MTK\Redmi 9A preloaders\preloader_k62v1_64_bsp_variant\25252.zi p
IMEI1 : 358XXXXXXXXXXXX
IMEI2 : 358XXXXXXXXXXXX
Fetching Data...OK
Writing Data...OK
Fixing Cert...OK
Disabling Signature Check..OK
Operation Finished.
[UltimateMTK2 v1.2]
But Now always gives this error checked on all usb ports and also many cables...
Brand/Model : *Auto* / *Auto Detect*
Operation : Restore Backup
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&39e6a57&0&10#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Downloading Preloader...Failed!
Please select preloader!
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
WARNING! DA Auth is Enabled! Only Special DA will work!
Using Internal DA!
Sending 1st DA...Failed!
Try to select another Download Agent.
Operation Finished.
[UltimateMTK2 v1.2]
Operation : IMEI Repair (Xiaomi Method-Redmi 9A (dandelion))
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&25797fd1&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 1649B4BC0A2DB0B6D2F7F5F8C9A27428
SoC ID[0] : 6A528A205AD804408FEDCD81942EF847
SoC ID[1] : DECF6056E92B8FA79563A6952ACE0D15
Running Exploit...
Installing LibUsb Filter Driver...OKDone
Preloader : preloader_k62v1_64_bsp.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 450100444134303634016381022569F5 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : DA4064
CID : 450100444134303634016381022569F5
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Manuf. : Xiaomi
And. Ver. : 11
Build Dt. : Wed Jul 27 21:08:32 CST 2022
Display ID : RP1A.200720.011
Ver. Inc. : V12.5.6.0.RCDMIXM
Locale : en-GB
Mod. Dev. : dandelion_global
Patch : 2022-07-01
Bootloader : UNLOCKED
Reading nvdata..OK
Reading nvram..OK
Backup saved as H:\UMT Read\MTK\Redmi 9A preloaders\preloader_k62v1_64_bsp_variant\25252.zi p
IMEI1 : 358XXXXXXXXXXXX
IMEI2 : 358XXXXXXXXXXXX
Fetching Data...OK
Writing Data...OK
Fixing Cert...OK
Disabling Signature Check..OK
Operation Finished.
[UltimateMTK2 v1.2]
But Now always gives this error checked on all usb ports and also many cables...
Brand/Model : *Auto* / *Auto Detect*
Operation : Restore Backup
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&39e6a57&0&10#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Downloading Preloader...Failed!
Please select preloader!
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
WARNING! DA Auth is Enabled! Only Special DA will work!
Using Internal DA!
Sending 1st DA...Failed!
Try to select another Download Agent.
Operation Finished.
[UltimateMTK2 v1.2]
Using port SAMSUNG Mobile USB Modem #9 (COM3)
Reading info mode MTP ... OK
Model : SM-A315F
CSC : INS
AP version : A315FXXU4DWI2
BL version : A315FXXU4DWH2
CP version : A315FXXU4DWI2
CSC version : A315FODM4DWH4
IMEI : 350
SN : RZ
Lock status : NONE
Country : IN
MCC : 405,
MNC : 54,
USB mode : AT,MTP
Unique number : C3V003777681158
Android version : 12
FRP status : TRIGGERED
Firmware : https://samfw.com/firmware/SM-A315F/INS
Model : MediaTek FRP
Operation : All MediaTek 2023
Searching for Phone...Found
Port: : COM12 : SAMSUNG Mobile USB Modem #3
Checking for Device...Found [Download Mode]
Reading Data from Phone...Done
Chipset : MTK6765 [HiSpeed]
Closing Session...Done
Port: : COM3 : SAMSUNG Mobile USB Modem #3
Checking for Device...Found [Download Mode]
Resetting FRP Data...Done
Closing Session...Done
Operation Finished.
Elapsed Time 00:28
[UltimateSams v0.7]
Saved to Logs\27454211_1967331.log
Reading info mode MTP ... OK
Model : SM-A315F
CSC : INS
AP version : A315FXXU4DWI2
BL version : A315FXXU4DWH2
CP version : A315FXXU4DWI2
CSC version : A315FODM4DWH4
IMEI : 350
SN : RZ
Lock status : NONE
Country : IN
MCC : 405,
MNC : 54,
USB mode : AT,MTP
Unique number : C3V003777681158
Android version : 12
FRP status : TRIGGERED
Firmware : https://samfw.com/firmware/SM-A315F/INS
Model : MediaTek FRP
Operation : All MediaTek 2023
Searching for Phone...Found
Port: : COM12 : SAMSUNG Mobile USB Modem #3
Checking for Device...Found [Download Mode]
Reading Data from Phone...Done
Chipset : MTK6765 [HiSpeed]
Closing Session...Done
Port: : COM3 : SAMSUNG Mobile USB Modem #3
Checking for Device...Found [Download Mode]
Resetting FRP Data...Done
Closing Session...Done
Operation Finished.
Elapsed Time 00:28
[UltimateSams v0.7]
Saved to Logs\27454211_1967331.log
Supported CPUs for these operations which user can use by selecting CPU if Model Not listed or fail using old method - New Security:
Supported Features of SPRD Tool so far:
Supported CPUs for these operations which user can use by selecting CPU if Model Not listed or fail using old method - New Security:
Supported Features of SPRD Tool so far:
Added:
ZTE
- Supported read info, factory format, FRP, backup/restore security, backup/restore firmware, Diag mode functions.
-- Sim Unlock is not supported yet for this phone.
Itel
Supported
Boot info, remove FRP, wipe, format userdata, erase all, remove simlock,
backup/restore firmware, unlock bootloader, Diag mode functions.
Also Added:
1. Added to use custom loader on flashing firmware.
User can load custom loader on flashing firmware (pac or readed firmware) and exe will ask to confirm this.
Can be useful for phones what can't be booted with default loader from PAC file.
2. Added ITEL/TECNO/INFINIX RSA boot authorization for year 2022 Phones.
Exe will detect auto such phones and will try to perform authorization.
Is supported for flashing PAC file, selecting custom loader so on.
Phones with new version (2024 RSA) is not supported yet.
Authorization is offline and not need internet for this.
3. Improved Motorola RSA boot authorization for supported phones.
Added possibility to flash Pac file using original loader what request authorization.
4. Improved flash PAC firmware for supported phones(using new protocol must perform flashing more fast).
5. Added read phone UID (sc9832e, sc7731e,sc9863a).
- Must be used before using Sim Unlock for phones with Simlock 4 security algo.
Before performing Sim Unlock need to read phone UID, after can be performed operation.
6. Added write NVRAM (protect calibration or skip calibration) on flashing firmware using generic loaders.
7. Added Realme Remove Regional Lock for supported by exe models.
- Was added 2 types of lock, for old and new firmware versions.
8. Added as beta function remove MDM lock, function is supported only by generic loaders listing.
Some models can not support this function.
Fixes:
1. Fixed security backup/security restore using generic loaders for supported CPU.
Now must restore NVRAM ok.
2. Fixed sSimlock for phones with Simlock 4 using generic loaders(sc9832e, sc7731e,sc9863a).
3. Fixed Nokia T10 loader (reported by users)
Official Website:
UMT Tool
Ultimate Multi Tool Pro
Official Shop:
Fast Unlocking Shop
Payments by Credit Card & via
Download From Support Area
OR
UMT_UNISOC_Installer_v0.9.rar
Password for Zip:
UmtTeam
- SC7731E
- SC9820E
- SC9832E
- SC9863A
- Tiger T310(UMS312)
- Tiger T606
- Tiger T610(UMS512)
- Tiger T612(UMS9230)
- Tiger T616
- Tiger T618 By Model Selection.
- Tiger T700
Supported Features of SPRD Tool so far:
- Remove FRP
- Backup & Restore NVRam
- Backup/Read Fimrware
- Write Firmware
- Reset Userdata
- Bootloader Unlock
- Read & Write RPMB
Supported CPUs for these operations which user can use by selecting CPU if Model Not listed or fail using old method - New Security:
- SC7731E
- SC9820E
- SC9832E
- SC9863A
- Tiger T310(UMS312)
- Tiger T606
- Tiger T610(UMS512)
- Tiger T612(UMS9230)
- Tiger T616
- Tiger T700
- SC9863A_64
- T606v2 (Tiger T606 Ver2)
- T610v2 (Tiger T610(UMS512) Ver2)
- T616v2 (Tiger T616 Ver2)
Supported Features of SPRD Tool so far:
- Remove FRP
- Backup & Restore NVRam
- Backup/Read Fimrware
- Write Firmware
- Reset Userdata
- Bootloader Unlock
- Read & Write RPMB
Added:
ZTE
- ZTE V30(9030) - T618 CPU
- Supported read info, factory format, FRP, backup/restore security, backup/restore firmware, Diag mode functions.
-- Sim Unlock is not supported yet for this phone.
Itel
- S16 Pro-Vision 2 (L6503)
- Vision 2s (P651L)
- Vision 3 (S661L)
- Vision 5 (S663LC)
- Vision 2S (P681L)
- S15 Pro (L6002P)
- Vision 3 (S661LN)
- A05s (A663L)
- P40 (P662L)
- S18 Pro (S662L)
- A60s (A662LM)
- A70 (A665L)
- P36 Pro
- Vision 1 Pro(L6502)
- A26(A571L)
- A49 Play(A631L)
- A60(A662L)
- A21
- A40
- A41
- A24 Pro(A511LP2)
- A23S(A511LQ)
- Vision 3(A632W)
- A60(A662L)
Supported
Boot info, remove FRP, wipe, format userdata, erase all, remove simlock,
backup/restore firmware, unlock bootloader, Diag mode functions.
Also Added:
1. Added to use custom loader on flashing firmware.
User can load custom loader on flashing firmware (pac or readed firmware) and exe will ask to confirm this.
Can be useful for phones what can't be booted with default loader from PAC file.
2. Added ITEL/TECNO/INFINIX RSA boot authorization for year 2022 Phones.
Exe will detect auto such phones and will try to perform authorization.
Is supported for flashing PAC file, selecting custom loader so on.
Phones with new version (2024 RSA) is not supported yet.
Authorization is offline and not need internet for this.
3. Improved Motorola RSA boot authorization for supported phones.
Added possibility to flash Pac file using original loader what request authorization.
4. Improved flash PAC firmware for supported phones(using new protocol must perform flashing more fast).
5. Added read phone UID (sc9832e, sc7731e,sc9863a).
- Must be used before using Sim Unlock for phones with Simlock 4 security algo.
Before performing Sim Unlock need to read phone UID, after can be performed operation.
6. Added write NVRAM (protect calibration or skip calibration) on flashing firmware using generic loaders.
7. Added Realme Remove Regional Lock for supported by exe models.
- Was added 2 types of lock, for old and new firmware versions.
8. Added as beta function remove MDM lock, function is supported only by generic loaders listing.
Some models can not support this function.
Fixes:
1. Fixed security backup/security restore using generic loaders for supported CPU.
Now must restore NVRAM ok.
2. Fixed sSimlock for phones with Simlock 4 using generic loaders(sc9832e, sc7731e,sc9863a).
3. Fixed Nokia T10 loader (reported by users)
Official Website:
UMT Tool
Ultimate Multi Tool Pro
Official Shop:
Fast Unlocking Shop
Payments by Credit Card & via
- Stripe gateway
- Paypal
- Google Pay
- Apple Pay
Download From Support Area
OR
UMT_UNISOC_Installer_v0.9.rar
Password for Zip:
UmtTeam
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&2108ad5d&0&2
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6895 [1172] Dimensity 8100
Details : 8A00,CA00,0000
Dump Preloader is Disabled! Need preloader!
Preloader : preloader_xaga.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
WARNING! DA Auth is Enabled! Only Special DA will work!
DA : MTK_AllInOne_DA.bin
HW ID not found in DA, please select another DA!
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 207433567_0356326.log
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&2108ad5d&0&2
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6895 [1172] Dimensity 8100
Details : 8A00,CA00,0000
Dump Preloader is Disabled! Need preloader!
Preloader : preloader_xaga.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
WARNING! DA Auth is Enabled! Only Special DA will work!
DA : MTK_AllInOne_DA.bin
HW ID not found in DA, please select another DA!
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 207433567_0356326.log