Legitunlocks.com
Martview VS-01 7inch Built-in Vacuum Pump Level LCD Screen Separator

If You Have Any Problem Using UFI Box Or Any Problem Recover Set Post Here

R

ranjanjyoti

Member
Sep 13, 2019
14
1
Connection status: XHCI:HUB3[#2]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8844-2167
Boot version: 1.05, FW version: 1.15 (Nov 8 2022 18:51:23)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - MMC
Manufacturer ID: 0x15 (Samsung)
Product name: K5XYMB (0x4b3558594d42), rev: 0x00, serial number: 0xAAA5EA2A
Manufacturing date: Dec 2014
CID: 1501004B 3558594D 4200AAA5 EA2AC1D0
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Provisioned, counter: 0]
User area: 3.64 GiB(3,909,091,328 bytes)

Loading file: "\Nokia\Nokia_6.1(00WW_4_15O-V4.15O-QKQ1.190828.002)[KMDH6001DM-B422_FA429062]\ext_csd.bin", size: 512 bytes...
Writing extcsd, 512 bytes... Failed to switch[16][0,16,57] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[67][0,67,200] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[68][0,68,200] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[101][0,101,5] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[110][0,110,152] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[111][0,111,23] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[112][0,112,3] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[114][0,114,0] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[120][0,120,0] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[163][0,163,2] (return code: 4, CMD Error: Invalid response) !!!
Done
New EXT CSD info:
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Provisioned, counter: 0]
User area: 3.64 GiB(3,909,091,328 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Secure Write Protect Information: 0x00
Secure Feature support: 0x55
Partition configuration: 0x38
Partitioning support: 0x07
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Fail....... Fail....... Fail....... Please solve extcsd write
 
R

ranjanjyoti

Member
Sep 13, 2019
14
1
Connection status: XHCI:HUB3[#2]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8844-2167
Boot version: 1.05, FW version: 1.15 (Nov 8 2022 18:51:23)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 2.8 V
Bus: 8 bit (HS SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - MMC
Manufacturer ID: 0x15 (Samsung)
Product name: K7XVMB (0x4b3758564d42), rev: 0x01, serial number: 0xE70AE02C
Manufacturing date: Jun 2014
CID: 1501004B 3758564D 4201E70A E02C61A6
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
Firmware version: 0x01
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 2 MiB
Boot2: 2 MiB
RPMB: 2 MiB [Authentication Key not yet programmed]
User area: 7.28 GiB(7,818,182,656 bytes)

Changing partition size of Boot to 4 MiB and RPMB to 4 MiB... Done
Loading file: "\Xiaomi\Redmi%20Note%204\ext_csd.bin", size: 512 bytes...
Writing extcsd, 512 bytes... Failed to switch[16][0,16,59] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[17][0,17,1] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[31][0,31,1] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[64][0,64,255] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[65][0,65,255] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[66][0,66,55] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[96][0,96,62] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[110][0,110,0] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[111][0,111,0] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[114][0,114,0] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[120][0,120,0] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[121][0,121,0] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[163][0,163,2] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[179][0,179,56] (return code: 4, CMD Error: Invalid response) !!!
Done
New EXT CSD info:
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Authentication Key not yet programmed]
User area: 7.28 GiB(7,818,182,656 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Secure Write Protect Information: 0x00
Secure Feature support: 0x55
Partition configuration: 0x38
Partitioning support: 0x07
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00



ext_csd write error pls slove
 
mohsen456

mohsen456

Member
Nov 26, 2019
5
1
update update update update update update update update update update .............................................................
 
  • Like
Reactions: clan123
B

borofone

Active Member
Jan 27, 2023
21
2
Papua New Guinea
Im having this issue with my box. First software open Ok but when I insert adpater it will not detect the ufi box



Anu suggestion or where to send box for repair?
 
G

goblen

Junior Member
Jun 22, 2023
4
0
Russia
good day! Bought ufi ufs-prog gives an error when activated (License activation was processed, but could not be confirmed, please try again.) How to deal with it???
 

Attachments

  • 0000.png
    0000.png
    266.3 KB · Views: 20
artur78artur

artur78artur

Junior Member
Mar 8, 2021
4
0
Russia
Hello dear friends PLEASE HELP ME
I bought a ufi box UFS, the box does not start, I ONLY BOUGHT A NEW VERSION OF THE UFI BOX, I DON'T HAVE AN OLD VERSION OF THE BOX
 

Attachments

  • 20230719_144229.jpg
    20230719_144229.jpg
    227.8 KB · Views: 17
  • ghfgh.JPG
    ghfgh.JPG
    89.8 KB · Views: 18
  • hcd.JPG
    hcd.JPG
    92.6 KB · Views: 17
  • lk.PNG
    lk.PNG
    77.6 KB · Views: 17
  • VGBJ.JPG
    VGBJ.JPG
    78.4 KB · Views: 18
dondav77

dondav77

Active Member
Sep 21, 2022
38
4
Nigeria
Hello guys I really need assistance with Samsung a042f I have issues with MDM can't download, I tried backing up dumpfile and erased emmc and wrote back the dumpfile after updating emmc fw, well this method usally works well for me but this time it didn't after successfully writing pit file and flashing bootloader thats BL file from stock firmware downloaded form samfw.com once I bootup device in download mode to write stock firmware back to device I still keep getting MDM block binary ...Plz help me I really don't know what next to do from here .....thanks...
 
aftab_ansari5287

aftab_ansari5287

Super Moderator
Aug 16, 2019
2,519
3,377
INDIA
Skype
aftab_ansari5287
PayPal:

Donate money to this user
artur78artur

artur78artur

Junior Member
Mar 8, 2021
4
0
Russia
hello dear, please help me, UFI - UFS ToolBox problem NOT WORKING, License activation has been processed but failed to verify, please try again.
only UFI - eMMC ToolBox WORKING.
 

Attachments

  • mmmmmm.JPG
    mmmmmm.JPG
    121.1 KB · Views: 8
  • sssssss.JPG
    sssssss.JPG
    102.9 KB · Views: 8
R

russlan71

Junior Member
Jul 24, 2023
1
0
Ukraine
Hello dear, please help me, UFI - UFS ToolBox problem NOT WORKING, license activation was processed but not validated, please try again.
only UFI - eMMC ToolBox WORKS. Same problem.
 
Last edited by a moderator:
R

ranjanjyoti

Member
Sep 13, 2019
14
1
Why ufi team not update after giving a wrong update ..... it is killing most of the mobile if eng file not available .... pls update
 
NKhan_Gsm

NKhan_Gsm

Active Member
Jun 4, 2022
24
1
Afghanistan
Hello respected UFI-BOX experts !

I have a SHARP AQUOUS R5 5G it had only Pattern Lock I want to unlock it I removed MMC and put it in MMC Adapter but it Can not be detected it always give same Error


Connection status: XHCI:HUB3[#3]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-8253
Boot version: 1.05, FW version: 1.15 (Nov 8 2022 18:51:23)
Insertion test...
Error: VCC overcurrent detected !!!
Aborted

I cleaned MMC and refilled it but still same How I Can fix this problem please guide me ?

P.S I checked other MMC it was detected Success fully .

WBR
 
aftab_ansari5287

aftab_ansari5287

Super Moderator
Aug 16, 2019
2,519
3,377
INDIA
Skype
aftab_ansari5287
PayPal:

Donate money to this user
NKhan_Gsm said:
Hello respected UFI-BOX experts !

I have a SHARP AQUOUS R5 5G it had only Pattern Lock I want to unlock it I removed MMC and put it in MMC Adapter but it Can not be detected it always give same Error


Connection status: XHCI:HUB3[#3]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-8253
Boot version: 1.05, FW version: 1.15 (Nov 8 2022 18:51:23)
Insertion test...
Error: VCC overcurrent detected !!!
Aborted

I cleaned MMC and refilled it but still same How I Can fix this problem please guide me ?

P.S I checked other MMC it was detected Success fully .

WBR
Click to expand...
Clean the eMMC and BGA Socket Both then try
 
You must log in or register to reply here.
Top