UMT UMTv2/UMTPro UltimateMTK2 v1.4 - Xiaomi Preloader Mode

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Flash Scatter
USING PL_EXPLOIT [XIAOMI AUTH]
Using Preloader from Firmware
BOOT CFG : [PL_EXPLOIT : ON]
DL AGENT : DA_gale_V14.0.5.bin
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM2)
Device Path : \\?\usb#vid_0e8d&pid_2000#4&10763805&0&2#{86e0d1e0-8011-11d0-9ce4-08003e301v22}
Driver : MediaTek Inc., 3.0.1511.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 218246B06D11E4D93BA499006A5BF6BF
SoC ID[0] : B90010898637AD2EA799AF03834B9DBE
SoC ID[1] : 57382572FA4EB6596A01B5C01540D5AD
DA : DA_gale_V14.0.5.bin
DA_INFO : MTK_AllInOne_DA_v5.5001.2023-11-15.20:17_10/19/2023_626809
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
Int. RAM : 0x0000000000070000 [448,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : C09G00
CID : D62D0011FB16F82BA1F4330394730305W
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000000400000 [4,00 MB]
USERAREA : 0x0000003A4BB00000 [233,18 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Writing preloader [preloader_air.bin]...OK
Writing preloader_backup [preloader_air.bin]...OK
Writing vbmeta_a [vbmeta.img]...OK
Writing vbmeta_system_a [vbmeta_system.img]...OK
Writing vbmeta_vendor_a [vbmeta_vendor.img]...OK
Writing md1img_a [md1img.img]...OK
Writing spmfw_a [spmfw.img]...GET_PACKET_LEN Error!Failed!
Operation Finished.
[UltimateMTK2 v1.4]

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Read Info
BOOT CFG : [BROM EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM2)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&3504fc2d&1&4
#{e768c1e7-986a-404d-bbf3-748b5dce914a}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : A647B893EBBA8295BB17BDE22470147A
SoC ID[0] : BFA7420F268D37231C853DA38C488B4F
SoC ID[1] : 6C10D9A57897CEAE90AAF6DE0672516B
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_fire.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 9B010360050D64C3B6A5705930533235 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : Y0S256
CID : 9B010360050D64C3B6A5705930533235
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000003A3E000000 [232.97 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Operation Finished.
[UltimateMTK2 v1.4]
Log Saved : 207659611_154678.log


Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [BROM EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM2)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&3504fc2d&1&4
#{e768c1e7-986a-404d-bbf3-748b5dce914a}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : A647B89BDBBA8295BB17E22470147A3E
SoC ID[0] : BFA74488B4F0F268D37231C2853DA38C
SoC ID[1] : 6C10DAF69A57897CEAE90ADE0672516B
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_fire.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 9B0100360050D64C3B6A575930533235 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : Y0S256
CID : 9B01005930533235360050D64C3B6A57
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000003A3E000000 [232.97 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.4]
Log Saved : 207659611_154678.log

 

[KHAN JAN]

UMTv2/UMTPro UltimateMTK2 v1.4 eroor​

 

[KHAN JAN]

UMTv2 / UMT Pro
Innovative and Intelligent


UltimateMTK2 v1.4
The Ultimate MediaTek Tool

What's New:

Added Xiaomi Preloader Auth
- Supports Firmware Read/Write, FRP, Format, Mi Account etc.
- Should be working on any Xiaomi device which connects in Preloader Mode
- Both MIUI and HyperOS are Supported
- Select XIAOMI AUTH from PL_EXLOIT list, and select DA.
- Single DA may not work on all version due to signing.

Tested Devices:
- Redmi 13C (gale)
- Redmi Note 13 5G (gold)
- Redmi Note 13R Pro (gold)
- POCO X6 Neo 5G (gold)

IMPORTANT:
- You need to use DA from same version/region firmware.
- Due to numerous firmware version and region, adding them all is not suitable.
- If DA1 stage is failed, that means selected DA is not compatible.
- In such case, you must select DA from same version/region firmware.
- This method should work on almost all Xiaomi Devices by using DA from firmware.





Updated Internal DA selection
- This should fix DA selection error for some chipsets


Fixed dm-verity error on Safe Format


Added Safe Format function for Xiaomi


Added Safe Format + FRP for Xiaomi







Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)




Note : Some features are device/OS specific and may not work on all devices.




WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.

ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.




Download using Support Access or Mirrors



Official Website:
Ultimate Multi Tool
UMT Pro


Br,
UMT

 

[jakeka]

hi any help tecno 20c spark
USING PL_EXLOIT [INFINIX V1]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM12)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&1f03ab54&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 5D6CA6D5EEF8E126DFD8F6C9156EA827
SoC ID[0] : 7C645AB775A5D121D5999567D6EE1DF7
SoC ID[1] : C06B32F0EC25673176CDCE1A5C1E18CA
Sending 1st DA..OK
Jump DA Address...OK
Syncing...Failed!
Operation Finished.
[UltimateMTK2 v1.4]
Log Saved : 20240723_153549.log

 

[GsmToto]

USING PL_EXLOIT [VIVO V2]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&3875b958f&0&2#{86e0d1e0-8033-11d0-9ce4-08003e301f65}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 3879C431674E99A65C31AB901B4152DA
SoC ID[0] : F45C5B012414BDAA68FBEA5DE22D965C
SoC ID[1] : EA7DFCF94E2EE8492E2DF5EE8085B79E
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
Running PL_EXPLOIT [2]...Done
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : DP6DBB
CID : 15010044503644424202A520F4FC192D
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
PRE EOL : NORMAL
Life. Est.A : 10%-20% LIFE TIME USED
Life. Est.B : 10%-20% LIFE TIME USED
Reading Partition Table...OK
Prod. Model : PD2138F_EX
And. Ver. : 13
Prod. Ver. : PD2138F_EX_A_38.22.1
Hw. Ver. : PD2138F_EXMA
Build Dt. : Sat Dec 9 11:44:53 CST 2023
Display ID : TP1A.220624.014 release-keys
Ver. Inc. : eng.compil.20231209.120123
Locale : en-US
Patch : 2023-12-01
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.4]
Log Saved : 20689455_178733.log

 

[bisdak]

Xiaomi Redmi 9C NFC​

Brand/Model : *Auto* / *Auto Detect*
Operation : Safe Format+FRP (Xiaomi)
BOOT CFG : [BROM EXPLOIT : ON]
PL : C:\Users\King\Desktop\New folder\angelica_global_images_V12.0.23.0.QCRMIXM_20230323.0000.00_10.0_global\images\preloader_k65v1_64_bsp.bin
Waiting for Device...Found
Port : MediaTek USB Port (COM24)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&1958333f&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 47141637C2AF3F1D1B6F479E9455FCB2
SoC ID[0] : 822896C7C4C3642146B2EB4BACFCB30B
SoC ID[1] : 4D5C37CD752ABAF0432C7FC09CED14CC
Running Exploit...Done
Preloader : preloader_k65v1_64_bsp.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 450100444134303634012079811567E3 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x00000000C0000000 [3.00 GB]
Flash ID : DA4064
CID : 450100444134303634012079811567E3
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
PRE EOL : NORMAL
Life. Est.A : 10%-20% LIFE TIME USED
Life. Est.B : 20%-30% LIFE TIME USED
Reading Partition Table...OK
Manuf. : Xiaomi
And. Ver. : 10
Build Dt. : Thu Mar 23 17:50:47 CST 2023
Display ID : QP1A.190711.020
Ver. Inc. : V12.0.23.0.QCRMIXM
Locale : en-GB
Mod. Dev. : angelica_global
Patch : 2023-02-01
Bootloader : LOCKED
Safe Format (Xiaomi)...Done
If phone stuck on recovery, try [Fix Recovery].
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.4]

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Flash Scatter
Using Preloader from Firmware
BOOT CFG : [BROM EXPLOIT : ON]
PL : D:\Xiaomi\Redmi Note 12 Pro - Ruby\Hyper OS\ruby_eea_global_images_OS1.0.4.0.UMOEUXM_14.0\images\preloader_ruby.bin
Waiting for Device...Found
Port : MediaTek USB Port (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&5011d78&0&8#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6877 [0959] Dimensity 900/1080
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : BEEE186F78CD30438C703C588D0BE41D
SoC ID[0] : 56019F96333CCA12307C
SoC ID[1] : B318D912782AEA24933E99FE518E81DB
Running Exploit...Done
Preloader : preloader_ruby.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 2C014D54841553255323231323847415 [UFS]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000070000 [448,00 KB]
Ext. RAM : 0x0000000180000000 [6,00 GB]
Flash ID : MT128GAXAU2U22
CID : 2C014D54313238474158415532553232
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000000400000 [4,00 MB]
USERAREA : 0x0000001DCB000000 [119,17 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Writing preloader [preloader_ruby.bin]...OK
Writing vbmeta_a [vbmeta.img]...OK
Writing vbmeta_system_a [vbmeta_system.img]...OK
Writing vbmeta_vendor_a [vbmeta_vendor.img]...OK
Writing md1img_a [md1img.img]...OK
Writing spmfw_a [spmfw.img]...OK
Writing audio_dsp_a [audio_dsp.img]...OK
Writing pi_img_a [pi_img.img]...OK
Writing dpm_a [dpm.img]...OK
Writing scp_a [scp.img]...OK
Writing sspm_a [sspm.img]...OK
Writing mcupm_a [mcupm.img]...OK
Writing cam_vpu1_a [cam_vpu1.img]...OK
Writing cam_vpu2_a [cam_vpu2.img]...OK
Writing cam_vpu3_a [cam_vpu3.img]...OK
Writing gz_a [gz.img]...OK
Writing lk_a [lk.img]...OK
Writing boot_a [boot.img]...OK
Writing logo_a [logo.bin]...OK
Writing dtbo_a [dtbo.img]...OK
Writing tee_a [tee.img]...OK
Writing efuse [efuse.img]...OK
Writing logo_b [logo.bin]...OK
Writing super [super.img]...OK
Writing cust [cust.img]...OK
Writing rescue [rescue.img]...OK
Writing userdata [userdata.img]...OK
Operation Finished.
[UltimateMTK2 v1.3]

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Safe Format+FRP
BOOT CFG : [BROM EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek USB Port (COM2)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&16a0d8be&0&4#{86e0d1e0-8055-11d0-9ce4-99003e301f56}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 2958E810543523A4021BEBDCB8AC938B
SoC ID[0] : 3558C8DEBD2D2A83093D35892D08C5DA
SoC ID[1] : 0DD273095724E20D2091C5F9E8DF584C
Running Exploit...Done
Downloading Preloader...Failed!
Please select preloader!
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 13014E5391026BC73C858273304A394B [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : S0J9K91ZGKX012
CID : 13014E53304A394B391026BC73C85827
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000001D1F000000 [116.48 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
And. Ver. : 10
Build Dt. : Sat Oct 16 20:58:04 CST 2021
Display ID : QP1A.190711.020 release-keys
Locale : en-US
Patch : 2021-10-05
Bootloader : LOCKED
Executing Safe Format...Done
If phone stuck on recovery, try [Fix Recovery].
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.4]
Log Saved : 20568933_136792.log

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [BROM EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM2)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&266d5c64&0&8#{a5dcbf10-6642-11d2-901f-00c04fb956dh}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 53C100DF5EA1467011E0D1E4C725287C
SoC ID[0] : 3B0215F99798367CF7A61DE934DAA788
SoC ID[1] : 8E48A480FAB0D043472CE5FE85C885EC
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_merlin.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 13014E4710100BCD632813314A395339 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000070000 [448,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : G1J9S9
CID : 13014E47314A39533910100BCD632813
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000001D1F000000 [116,48 GB]
PRE EOL : NORMAL
Life. Est.A : 10%-20% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Manuf. : Xiaomi
And. Ver. : 12
Build Dt. : Wed Nov 30 10:39:15 CST 2022
Display ID : SP1A.210812.016
Ver. Inc. : V13.0.3.0.SJOEUXM
Locale : en-GB
Mod. Dev. : merlin_eea_global
Patch : 2022-11-01
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.4]
Log Saved : 20578922_188599.log

 

[GsmToto]

USING PL_EXPLOIT [XIAOMI AUTH]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [PL_EXPLOIT : ON]
DL AGENT : DA_gale_V14.0.5.bin
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&1f73d83a&0&3#{a5dcbf10-6567-11d2-90m-00c04fb951gh}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 1DA207E89BAC0D52ED5860E734B5252D
SoC ID[0] : 48860E98E1F053719421E4CE8690840D
SoC ID[1] : 6B48D62369712D0EC3749451A427540A
DA : DA_gale_V14.0.5.bin
DA_INFO : MTK_AllInOne_DA_v5.5001.2023-11-15.20:17_10/19/2023_626809
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : C09G00
CID : D62D001172DDA56AA314330394730305
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000003A4BB00000 [233.18 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.4]

 

[bisdak]

Oppo A5s (AX5s)​

Brand/Model : *Auto* / *Auto Detect*
Operation : Safe Format (Oppo)
BOOT CFG : [BROM EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek USB Port (COM24)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&1958333f&0&1#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 10E9FD08DA0F8D86A4CF555BD4711306
SoC ID[0] : C9C3701536DF109EC0686643CC9283C3
SoC ID[1] : AA3F8DC6967DF1A1080DB347878EFE0E
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_oppo6765_18511.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 150100474436424D4201EDD596B396ED [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x00000000C0000000 [3.00 GB]
Flash ID : GD6BMB
CID : 150100474436424D4201EDD596B396ED
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
PRE EOL : NORMAL
Life. Est.A : LIFE TIME USAGE EXCEED
Life. Est.B : LIFE TIME USAGE EXCEED
Reading Partition Table...OK
Manuf. : OPPO
And. Ver. : 8.1.0
Locale : en-US
Patch : 2021-04-05
Bootloader : LOCKED
Executing Safe Format (Oppo)...Done
If phone stuck on recovery, try [Fix Recovery].
Operation Finished.
[UltimateMTK2 v1.4]
Log Saved : 20240802_104420.log

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Erase Data + FRP
BOOT CFG : [BROM EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek USB Port (COM2)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&390692d&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1511.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 6F43776A09C46EEBF307D223E10F5F9D
SoC ID[0] : 6AA0A4693586DDB58D8F1181D43E5DCE
SoC ID[1] : 97011FACB89B9E0EF29784E258391206
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_oppo6769.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 13014E4730057608E6574514A3952381 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : G1J9R8
CID : 13014E47314A39523810057608E65745
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800457 [58.24 GB]
PRE EOL : NORMAL
Life. Est.A : 40%-50% LIFE TIME USED
Life. Est.B : 20%-30% LIFE TIME USED
Reading Partition Table...OK
And. Ver. : 11
Build Dt. : Tue Sep 6 18:59:36 CST 2022
Display ID : RP1A.200720.011 release-keys
Ver. Inc. : 1623809896024
Locale : en-US
Patch : 2022-09-05
Bootloader : LOCKED
Erasing Userdata...OK
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.4]
Log Saved : 20580751_157721.log

 

[bisdak]

Job: Remove FRP
SELECTED: SM-A032F
ACTION: Erase FRP
Start Detect phone.
Testpoint image link for this model is located in utils tab
Phone must be off(you can service this phone without battery also).
Connect Testpoint while inserting usb cable.
After booting, testpoint can be removed.
Detected: SPRD U2S Diag (COM4)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 101D8A9C [5e] 9171DB
UID: TG7K83_22_21_28
FileSystem: EMMC
Read partition info is supported by loader.
***************
Manufacturer: samsung
Brand: samsung
Device: a3core
Model: SM-A032F
Build ID: RP1A.201005.001
CPU arhitecture: armeabi-v7a
Build product name: a3core
Build description: a3corexx-user 11 RP1A.201005.001 A032FXXU2AVH4 release-keys
Build Id: RP1A.201005.001
Android Release: 11
Android Version: RP1A.201005.001.A032FXXU2AVH4
Security patch: 2022-07-01
CPU NAME: SC9863A
Removing frp, wait...
Found [persistent] [persistent] Size to download: 1024 KB
[1]FRP: persistent
Done.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\UMT\unisoc_module\spreadtrum_module_backup_folder\Saved_Logs\samsung_RP1A_201005_001_A032FXXU2AVH4_erase_frp.txt
Total Time: 00:00:43
Done.

 

[GsmToto]

Device : Xiaomi Redmi 10C (fog)
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM2)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM2)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1801B00 [SM6225] 00007200
OPK_DATA : 4B60244704D7212198FBDE6433FCE 1D25A7B0472DD7E5B96DD5BB7233886E38F
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SMOK6225_001]...Done
Executing Loader...
Auth Enabled Device! You may need Mi Auth Account to service!
Init EDL Auth...OK
Detecting Storage Type...OK
Hardware : SM6225, UFS, 128 GB
LU Count : 6 [0x01C45800] [0x00000800] [0x00000800] [0x00002000] [0x00180000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [94]
Reading Device Information...OK
Software : , V14.0.7.0.TGEYKAED [Mon May 27 12:18:55 UTC 2024]
Android Ver. : 13
Patch Level : 2024-06-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 10.4

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [BROM EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&237d5c64&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6761 [0717] Helio A20/P22/A22/A25/G25
Details : 8A00,CA01,0200
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 58311DD99B62560E653A065E332E4E1E
SoC ID[0] : 7716B0A28761C752E458E987D2B6B03A
SoC ID[1] : 7E1F5725B8A562A4E84157A41B6109EB
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_ke5_h6123go.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 1501203848F062B284B0051583633414M [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000039000 [228,00 KB]
Ext. RAM : 0x0000000080000000 [2,00 GB]
Flash ID : QX63AB
CID : 15010053848F062B284B158363341420M
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000000400000 [4,00 MB]
USERAREA : 0x0000000747C00000 [29,12 GB]
PRE EOL : NORMAL
Life. Est.A : 20%-30% LIFE TIME USED
Life. Est.B : 20%-30% LIFE TIME USED
Reading Partition Table...OK
And. Ver. : 10
Build Dt. : Mon Aug 22 20:44:38 CST 2022
Display ID : KE5-H6123ABC-QGo-GL-220822V553
Ver. Inc. : ABC-GL-220822V553
Locale : en-US
Patch : 2022-08-01
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.4]
Log Saved : 20702625_168422.log

 

[bisdak]

Samsung Galaxy A02​

Frp Problem...!

Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM24 [MediaTek USB Port (COM24)]
Device Path: \\?\usb#vid_0e8d&pid_0003#6&1958333f&0&1#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0699, [MT6739/MT6731] [Unknown]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: False] [DA Auth: True]
MEID: F72373736F86C5B4344C19D87B7D799C
Preparing device...
-- Success!
Preloader saved as : preloader_k39tv1_bsp_titan_hamster_240806_154210.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM24)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
Build Date : Tue Aug 15 11:36:17 +07 2023
Build Flavor : a02xx-user
Build Desc. : a02xx-user 11 RP1A.200720.012 A022FXXS3BWH1 release-keys
Android Ver. : 11
Display ID : RP1A.200720.012.A022FXXS3BWH1
Patch Level : 2023-09-01
Userdata is ENCRYPTED
Seeking FRP Data...
- Resetting FRP...
- Success!
- Resetting FRP...
- Success!
Resetting FRP...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 5.1]

 

[GsmToto]

USING PL_EXLOIT [INFINIX V2]
Brand/Model : *Auto* / *Auto Detect*
Operation : Erase Data + FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM2)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&94b8c887&0&6#{76e0d1e0-8089-11d0-9ce4-08003e301f54}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6833 [0989] Dimensity 700 5G k6833
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : D798EFBE92F9BF178D57B24FB6D532AD
SoC ID[0] : 25A38A64257E27C820B20479D84846FD
SoC ID[1] : 1A238F8ECF62395CDFD1D2B14C43BB1D
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : H9QT0GECN6X145
CID : AD0148395154304745434E3658313435
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000001DCB000000 [119.17 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Erasing Userdata...OK
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.4]
Log Saved : 20973022_146834.log

 

[GsmToto]

Please login to view image

USING PL_EXLOIT [OPPO V1]
Brand/Model : Auto / Auto Detect
Operation : Safe Format+FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM12)
Device Path : \\?\usb#vid_22d9&pid_0006#6&323149bf&0&2
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6877 [0959] Dimensity 900/1080
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 05B99B3671084E5481500D23D0F1AA5B
SoC ID[0] : 8407D2C42D5CE72E8203FC6726F1E8DA
SoC ID[1] : 4626C4399C71879D0EE6B1B5070C2E09
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000200000000 [8.00 GB]
Flash ID : H9HQ15AFAMBDAR
CID : AD014839485131354146414D42444152
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000001DCB000000 [119.17 GB]
PRE EOL : NORMAL
Life. Est.A : 10%-20% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Executing Safe Format...Done
If phone stuck on recovery, try [Fix Recovery].
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.4]
Log Saved : 20240811_194507.log

 

[Usman0039]

Redmi A3 (blue) HyperOS V816.0.3.0.UGRINXM FRP Reset Done Thanks UMT Team​

USING PL_EXPLOIT [XIAOMI AUTH]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [PL_EXPLOIT : ON]
DL AGENT : MTK_AllInOne_DA.bin
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1633 (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&4f9223b&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 3CAD58F29DD74D4278F1705E3DAC1F7A
SoC ID[0] : A9D6AEAB26DE8C360170F566978FFA90
SoC ID[1] : 53B967AB4C9F0EA94D6966B6E8805F51
DA : MTK_AllInOne_DA.bin
DA_INFO : MTK_AllInOne_DA_v5.5001.2023-10-30.15:37_10/19/2023_626809
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
Int. RAM : 0x000000000003A000 [232.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : C09E00
CID : D62D00433039453030510BEE4E9FBA81
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000000E92EC0000 [58.30 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.4]

bhai kese method btana