UMT UMTv2/UMTPro UltimateMTK2 v1.4 - Xiaomi Preloader Mode

[SPYROS]

UMTv2 / UMT Pro
Innovative and Intelligent


UltimateMTK2 v1.4
The Ultimate MediaTek Tool

What's New:

Added Xiaomi Preloader Auth
- Supports Firmware Read/Write, FRP, Format, Mi Account etc.
- Should be working on any Xiaomi device which connects in Preloader Mode
- Both MIUI and HyperOS are Supported
- Select XIAOMI AUTH from PL_EXLOIT list, and select DA.
- Single DA may not work on all version due to signing.

Tested Devices:
- Redmi 13C (gale)
- Redmi Note 13 5G (gold)
- Redmi Note 13R Pro (gold)
- POCO X6 Neo 5G (gold)

IMPORTANT:
- You need to use DA from same version/region firmware.
- Due to numerous firmware version and region, adding them all is not suitable.
- If DA1 stage is failed, that means selected DA is not compatible.
- In such case, you must select DA from same version/region firmware.
- This method should work on almost all Xiaomi Devices by using DA from firmware.





Updated Internal DA selection
- This should fix DA selection error for some chipsets


Fixed dm-verity error on Safe Format


Added Safe Format function for Xiaomi


Added Safe Format + FRP for Xiaomi







Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)




Note : Some features are device/OS specific and may not work on all devices.




WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.

ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.




Download using Support Access or Mirrors



Official Website:
Ultimate Multi Tool
UMT Pro


Br,
UMT

 

[rehansayyad]

UMTv2 / UMT Pro
Innovative and Intelligent


UltimateMTK2 v1.4
The Ultimate MediaTek Tool

What's New:

Added Xiaomi Preloader Auth
- Supports Firmware Read/Write, FRP, Format, Mi Account etc.
- Should be working on any Xiaomi device which connects in Preloader Mode
- Both MIUI and HyperOS are Supported
- Select XIAOMI AUTH from PL_EXLOIT list, and select DA.
- Single DA may not work on all version due to signing.

Tested Devices:
- Redmi 13C (gale)
- Redmi Note 13 5G (gold)
- Redmi Note 13R Pro (gold)
- POCO X6 Neo 5G (gold)

IMPORTANT:
- You need to use DA from same version/region firmware.
- Due to numerous firmware version and region, adding them all is not suitable.
- If DA1 stage is failed, that means selected DA is not compatible.
- In such case, you must select DA from same version/region firmware.
- This method should work on almost all Xiaomi Devices by using DA from firmware.





Updated Internal DA selection
- This should fix DA selection error for some chipsets


Fixed dm-verity error on Safe Format


Added Safe Format function for Xiaomi


Added Safe Format + FRP for Xiaomi







Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)




Note : Some features are device/OS specific and may not work on all devices.




WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.

ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.




Download using Support Access or Mirrors



Official Website:
Ultimate Multi Tool
UMT Pro


Br,
UMT

Please add
1.redmi 11 prime 4g
2.poco m5
Mt 6789 sp flash v6 Tool version add

 

[enocleus]

Brand/Model : Xiaomi / *Auto Detect*
Operation : Safe Format (Xiaomi)
BOOT CFG : [BROM EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM24)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&28b29415&0&1
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Force Enter BROM...Failed!
Please use TestPoint for BROM, or use PL_EXPLOIT if available.
Operation Finished.
[UltimateMTK2 v1.4]
Log Saved : 20240714_182626.log
error redmi 13c

 

[enocleus]

Brand/Model : Xiaomi / *Auto Detect*
Operation : Safe Format (Xiaomi)
BOOT CFG : [BROM EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM24)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&28b29415&0&1
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Force Enter BROM...Failed!
Please use TestPoint for BROM, or use PL_EXPLOIT if available.
Operation Finished.
[UltimateMTK2 v1.4]
Log Saved : 20240714_182626.log
error redmi 13c

PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : UNLOCKED
Safe Format (Xiaomi)...Done
If phone stuck on recovery, try [Fix Recovery].
Operation Finished.
[UltimateMTK2 v1.4]
Log Saved : 20240714_191701.log
Done
tnx umt team

 

[sohidul]

motorola moto edge 40 5g MT6891_TC2.PR6.SP.V7.2.P60.04.51R

 

[GsmToto]

USING PL_EXPLOIT [XIAOMI AUTH]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [PL_EXPLOIT : ON]
DL AGENT : DA_gale_V14.0.5.bin
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1633 (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&5114092&0&2#{a5dcbf33-6530-11d2-901f-00c04fb951fk}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 6A73EF3517F1EB76326D5B928E11EA5A
SoC ID[0] : B1E580CBD2F8E073D3ED783A9692253A
SoC ID[1] : 3F822B00AAF23355FD57AF549A5E2E3E
DA : DA_gale_V14.0.5.bin
DA_INFO : MTK_AllInOne_DA_v5.5001.2023-11-15.20:17_10/19/2023_626822
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
Int. RAM : 0x0000000000070000 [448,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : C09G00
CID : D62D0043303940F3DDCAEF73030511AD
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000000400000 [4,00 MB]
USERAREA : 0x0000003A4BB00000 [233,18 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.4]
Log Saved : 20863051_203833.log

 

[ayumi anindita]

vivo new security please

 

[yousafawan]

UMTv2 / UMT Pro
Innovative and Intelligent


UltimateMTK2 v1.4
The Ultimate MediaTek Tool

Please login to view image

What's New:

Added Xiaomi Preloader Auth
- Supports Firmware Read/Write, FRP, Format, Mi Account etc.
- Should be working on any Xiaomi device which connects in Preloader Mode
- Both MIUI and HyperOS are Supported
- Select XIAOMI AUTH from PL_EXLOIT list, and select DA.
- Single DA may not work on all version due to signing.

Tested Devices:
- Redmi 13C (gale)
- Redmi Note 13 5G (gold)
- Redmi Note 13R Pro (gold)
- POCO X6 Neo 5G (gold)

IMPORTANT:
- You need to use DA from same version/region firmware.
- Due to numerous firmware version and region, adding them all is not suitable.
- If DA1 stage is failed, that means selected DA is not compatible.
- In such case, you must select DA from same version/region firmware.
- This method should work on almost all Xiaomi Devices by using DA from firmware.





Updated Internal DA selection
- This should fix DA selection error for some chipsets


Fixed dm-verity error on Safe Format


Added Safe Format function for Xiaomi


Added Safe Format + FRP for Xiaomi







Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)




Note : Some features are device/OS specific and may not work on all devices.




WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.

ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.




Download using Support Access or Mirrors



Official Website:
Ultimate Multi Tool
UMT Pro


Br,
UMT

Redmi A3 (blue) HyperOS V816.0.3.0.UGRINXM FRP Reset Done Thanks UMT Team​

USING PL_EXPLOIT [XIAOMI AUTH]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [PL_EXPLOIT : ON]
DL AGENT : MTK_AllInOne_DA.bin
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1633 (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&4f9223b&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 3CAD58F29DD74D4278F1705E3DAC1F7A
SoC ID[0] : A9D6AEAB26DE8C360170F566978FFA90
SoC ID[1] : 53B967AB4C9F0EA94D6966B6E8805F51
DA : MTK_AllInOne_DA.bin
DA_INFO : MTK_AllInOne_DA_v5.5001.2023-10-30.15:37_10/19/2023_626809
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
Int. RAM : 0x000000000003A000 [232.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : C09E00
CID : D62D00433039453030510BEE4E9FBA81
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000000E92EC0000 [58.30 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.4]

​

 

[Hojiakbar]

USING PL_EXPLOIT [XIAOMI AUTH]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [PL_EXPLOIT : ON]
DL AGENT : DA_gale_V14.0.5.bin
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1633 (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&5114092&0&2#{a5dcbf33-6530-11d2-901f-00c04fb951fk}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 6A73EF3517F1EB76326D5B928E11EA5A
SoC ID[0] : B1E580CBD2F8E073D3ED783A9692253A
SoC ID[1] : 3F822B00AAF23355FD57AF549A5E2E3E
DA : DA_gale_V14.0.5.bin
DA_INFO : MTK_AllInOne_DA_v5.5001.2023-11-15.20:17_10/19/2023_626822
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
Int. RAM : 0x0000000000070000 [448,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : C09G00
CID : D62D0043303940F3DDCAEF73030511AD
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000000400000 [4,00 MB]
USERAREA : 0x0000003A4BB00000 [233,18 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.4]
Log Saved : 20863051_203833.log

can u share me ur DA file?

 

[Hojiakbar]

USING PL_EXPLOIT [XIAOMI AUTH]
Brand/Model : *Auto* / *Auto Detect*
Operation : Read Info
BOOT CFG : [PL_EXPLOIT : ON]
DL AGENT : MTK_AllInOne_DA.bin
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM24)
Device Path : \\?\usb#vid_0e8d&pid_2000#8&3339c744&0&2
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 800BCFE51B4FDA91289513F3663E6CC4
SoC ID[0] : 72014CA1C5C8C4576FD824359B89E132
SoC ID[1] : A2E2246C1CFB2F20EC6A811A5AD3260C
DA : MTK_AllInOne_DA.bin
DA_INFO : MTK_AllInOne_DA_v5.5001.2023-11-15.20:17_10/19/2023
_626809
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
Int. RAM : 0x0000000000070000 [448,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : C09G00
CID : D62D00433039473030511C5F2801CAAD
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000000400000 [4,00 MB]
USERAREA : 0x0000003A4BB00000 [233,18 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Connected to High-Speed DA Port
Reading Partition Table...OK
Bootloader : LOCKED
Operation Finished.
[UltimateMTK2 v1.4]
Log Saved : 20240715_191010.log

 

[GsmToto]

USING PL_EXLOIT [INFINIX V1]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&df2ee03&0&5
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : EB712AACB8EC6D297B9625417167D74C
SoC ID[0] : 575171629EC18DA9A694294F09E1DCED
SoC ID[1] : A7FD568E4E8D135F0C2A8FC90136BACE
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Int. RAM : 0x000000000003A000 [232,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : DV6DAB
CID : 15010044563644414202E7B403C634522
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000001D1EC00000 [116,48 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
And. Ver. : 11
Build Dt. : Thu Oct 12 17:50:44 CST 2023
Display ID : INFINIX-R-64-231012V554
Ver. Inc. : 231012V1295
Locale : en-US
Patch : 2023-10-05
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.4]
Log Saved : 20840433_148511.log

 

[GsmToto]

USING PL_EXLOIT [OPPO V2]
Brand/Model : *Auto* / *Auto Detect*
Operation : Erase Data + FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM4)
Device Path : \\?\usb#vid_22d9&pid_0006#5&1e6a4af9&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6877 [0959] Dimensity 900/1080
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 1885F58818CC09B3272B7941CFCD9E8C
SoC ID[0] : 2D8B5B384D7D10B4C8E1D64AC9E43CAC
SoC ID[1] : 7A78D21031D6E646DC8C44D89EA9F8CA
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000200000000 [8.00 GB]
Flash ID : HN8T05DEHKX073
CID : AD01484E385430354445484B58303733
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000001DCB000000 [119.17 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Erasing Userdata...OK
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.4]
Log Saved : 20804622_125710.log

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [EXPLOIT : OFF]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM2)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&1e4121f5&0&7#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.2.0.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
MEID : F64CA977A02A507C816298027608670D
SoC ID[0] : A3D31402EB857CFF1B420DEB0476B44A
SoC ID[1] : E51F5206D0C0767DE2C1006810097E7E
Using Internal DA!
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
Int. RAM : 0x0000000000038000 [224,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : DV6DAB
CID : 15010044563644414202C1F8E464783D
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000001D1EC00000 [116,48 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
And. Ver. : 13
Build Dt. : Mon May 8 17:40:05 CST 2023
Display ID : HiKING_A41_V01_05082023_13
Ver. Inc. : 2023174
Locale : tr-TR
Patch : 2023-03-05
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.4]
Log Saved : 20780433_039842.log

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Backup Security
BOOT CFG : [BROM EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek USB Port (COM2)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&1eb3904a&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1511.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6893 [0950] Dimensity 1200
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 03992F7294A96E44A424352E1974706A
SoC ID[0] : 7DF0818872354B19A53A395A915D270C
SoC ID[1] : 98BD2A3B78B768385550A17A4484325E
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_chopin.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : CE014B4C54432D423045545473855484D [UFS]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000070000 [448,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : KLUEG8UHDC-B0E
CID : CE014B4C55454738554844432D423045
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000000400000 [4,00 MB]
USERAREA : 0x0000003B96000000 [238,34 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
And. Ver. : 13
Build Dt. : Mon May 27 15:01:30 UTC 2024
Display ID : TP1A.220624.014
Ver. Inc. : V14.0.6.0****DTMGC
Locale : en-GB
Patch : 2024-04-01
Bootloader : LOCKED
Reading nvcfg...OK
Reading nvdata...OK
Reading nvram...OK
Reading protect1...OK
Reading protect2...OK
Reading persist...OK
Reading proinfo...OK
Reading md1img_a...OK
Reading md1img_b...OK
Backup : x3 gt.zip
Operation Finished.
[UltimateMTK2 v1.4]

 

[Mathavi Mobiles]

View attachment 67940

 

[Mathavi Mobiles]

Please login to view image

 

[nomaanz]

Which Version Of Firmware Support For Work Poco X6 Neo?

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Flash Scatter
USING PL_EXPLOIT [XIAOMI AUTH]
Using Preloader from Firmware
BOOT CFG : [PL_EXPLOIT : ON]
DL AGENT : DA_gale_V14.0.5.bin
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&306b1411&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.2.0.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 218246BD11E4D93BA40699006A5BF6BF
SoC ID[0] : B9000898637AD2EA799A1F03834B9DBE
SoC ID[1] : 5738255AD4EB6596A01B72FA5C01540D
DA : DA_gale_V14.0.5.bin
DA_INFO : MTK_AllInOne_DA_v5.5001.2023-11-15.20:17_10/19/2023_626809
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
Int. RAM : 0x0000000000070000 [448,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : C09G00
CID : D623030511FB16F82BA1FD0043303947K
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000000400000 [4,00 MB]
USERAREA : 0x0000003A4BB00000 [233,18 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Writing preloader [preloader_gale.bin]...OK
Writing vbmeta_a [vbmeta.img]...OK
Writing vbmeta_system_a [vbmeta_system.img]...OK
Writing vbmeta_vendor_a [vbmeta_vendor.img]...OK
Writing md1img_a [md1img.img]...OK
Writing spmfw_a [spmfw.img]...OK
Writing scp_a [scp.img]...OK
Writing sspm_a [sspm.img]...OK
Writing gz_a [gz.img]...OK
Writing lk_a [lk.img]...OK
Writing boot_a [boot.img]...OK
Writing dtbo_a [dtbo.img]...OK
Writing tee_a [tee.img]...OK
Writing efuse [efuse.img]...OK
Writing logo_a [logo.bin]...OK
Writing logo_b [logo.bin]...OK
Writing cust [cust.img]...OK
Writing super [super.img]...OK
Writing userdata [userdata.img]...OK
Operation Finished.
[UltimateMTK2 v1.4]
Log Saved : 20973411_149844.log

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Flash Scatter
USING PL_EXLOIT [VIVO V1]
Using Preloader from Firmware
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM2)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&67fe735&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951sj}
Driver : MediaTek Inc., 3.0.1511.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6761 [0717] Helio A20/P22/A22/A25/G25
Details : 8A00,CA01,0200
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 45E19BD72D15F7AE63752F8CB6C81969
SoC ID[0] : E9B5CAC1DCD3424E4BA958E0FF6D53FD
SoC ID[1] : 812AB82330056625EBAF462F8FD9279F
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Int. RAM : 0x000000000003A600 [233.50 KB]
Ext. RAM : 0x0000000080000000 [2.00 GB]
Flash ID : HAG4a2
CID : 90014A484147346132A5A7B1F2ED664F
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x00000003AB400000 [14.68 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Brand : vivo
Manuf. : vivo
Model : vivo 1812
Device : PD1917F_EX
And. Ver. : 8.1.0
Prod. Ver. : PD1917F_EX_A_1.71.10
Prod. Name : PD1917F_EX
Build Dt. : Sun Jun 26 00:34:08 CST 2022
Display ID : O11019 release-keys
Ver. Inc. : 1656170109
Locale : en-US
Patch : 2021-05-01
Bootloader : LOCKED
Writing preloader [preloader_k61v1_64_bsp.bin]...OK
Writing recovery [recovery-verified.img]...OK
Writing survival [survival-verified.img]...OK
Writing cust [oem.img]...OK
Writing efuse [efuse.img]...OK
Writing md1img [md1img-verified.img]...OK
Writing spmfw [spmfw-verified.img]...OK
Writing scp1 [scp-verified.img]...OK
Writing scp2 [scp-verified.img]...OK
Writing sspm_1 [sspm-verified.img]...OK
Writing sspm_2 [sspm-verified.img]...OK
Writing lk [lk-verified.img]...OK
Writing lk2 [lk-verified.img]...OK
Writing boot [boot-verified.img]...OK
Writing logo [logo-verified.bin]...OK
Writing odmdtbo [odmdtbo-verified.img]...OK
Writing tee1 [tee-verified.img]...OK
Writing tee2 [tee-verified.img]...OK
Writing vendor [vendor.img]...OK
Writing system [system.img]...OK
Writing cache [cache.img]...OK
Writing userdata [userdata.img]...OK
Operation Finished.
[UltimateMTK2 v1.4]

 

[SPYROS]

Brand/Model : *Auto* / *Auto Detect*
Operation : Safe Format+FRP (Xiaomi)
BOOT CFG : [BROM EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM8)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&81497bb&0&4
#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 97BC8C05AD954F0CD48DD735B0B94FCC
SoC ID[0] : 913AF950A191306E89AEFFAF14C466AE
SoC ID[1] : 9CF2C28D53E11D8D77D23B9B2CB3B520
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_water.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 9B010059305330363400381D16A74A71 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x0000000080000000 [2.00 GB]
Flash ID : Y0S064
CID : 9B010059305330363400381D16A74A71
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E90000000 [58.25 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Connected to High-Speed DA Port
Reading Partition Table...OK
Bootloader : LOCKED
Safe Format (Xiaomi)...Done
If phone stuck on recovery, try [Fix Recovery].
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.4]
Log Saved : 20286793_177444.log