Ufi tool mtk flash ve credi

[ByMotsan]

hi all.
İ have try flashing mi 8 note pro but software give error and cut credit how flash this phone and can i get my credit refund.
user : [email protected]



AUTH info: MTK, version: 1
Firmware package: begonia_global_images_V10.4.2.0.PGGMIXM_20191024.0000.00_9.0_global\images
BROM version[1]: 7.1917.3.0
DownloadAgent: MTK_AllInOne_DA[0].bin
hash: c8fa00811a246c975e865b14121d0f527fe674a2, size: 542.12 KiB
version: 3.3001.2018/04/12019/11/21 13:49:02, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN or VOL UP + DOWN(for newer model) to force MediaTek BootROM.
Scanning BootROM or Preloader port... Done
Detected [BootROM] MediaTek USB Port (COM65)
Connection status: EHCI:HUB:HUB:USB 1.10 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2015
Connecting Bootrom...
[SERVER] XIAOMI_FL [cactus,f91b56595ace6f72] ref id: XF07074382708, cost: 3, your balance: 17
Sending Download Agent...
Platform: MT6785, Hw ver: 0xCA00, Sw ver: 0x0000
Secure config: 0x00
Error: -1073545213 (STATUS_DA_SELECTION_ERR)
Error: -1073545213 (STATUS_DA_SELECTION_ERR)
Cannot find proper DA hw_code [0x6785]- sw_ver [0x0]
(connection.cpp, line:375)
You have used 1 available XIAOMI_FL slot for this phone, you have 2 FREE slot left to try again in case this task fails.
You may retry the task for more times without further authorization as long as you don't unplug the USB cable, change brand or model selection or close the application.

 

[zaza_21]

Yazılım yükleyemememe rağmen 8 kredi kaybedildi. lütfen kredimi geri yükle.
[email protected] / MjczMw ==

11-02-2021 18:54 XF04255683523 XIAOMI_FL merlin 1d46b3d14bef0b6d .. 4 3 başarısız H110M-K-17060390 .., 85.100.88.227
12-02-2021 08:09 XF09611565673 XIAOMI_FL merlin 1d46b3d14bef0b6d .. 4 1 - H110M-K-17060390 .., 85.100.88.227

thank you.

 

[zaza_21]

Please "Identify Device" at first, before any other operation.
Synchronizing files...
Synchronize finished, files are now up-to-date.
storage type: eMMC
Overview:
- Flashing, erase frp, erase userdata supported
for Qualcomm platform, go to \\FLASH:QUALCOMM
for MediaTek platform, go to \\FLASH:MEDIATEK
- For new models, flashing requires bootloader authorization by server
- Any Bootloader authorization will consume credit, use it with caution at your own risk !!!
- To avoid any troubles, please always use official firmware !!!
- Please note that generic unlock bootloader in Special Task is only for some spesific OLD models
- For new models, flashing requires server authentication and UFI CREDIT, go to \\ACCOUNT for the list of services and costs
!!! WARNING !!!
- Authorization should only be used for normal flashing with official firmware that match to your model
Any Special Tasks in MediaTek platform require write access and will not work for this model due to secure boot.
- Service cost for [Xiaomi] Redmi Note 9:
XIAOMI_FL(Bootloader Authorization(QC, MTK) - Including Identify, Flashing, SpecialTask): 4 credits
- Please turn off your "Find device" before flashing, bootloader authorization will not work when "Find device" is turned ON.
- Make sure to select the CORRECT phone model and storage type !
- Do not rename the BRAND and MODEL directory !
- Special Tasks are bonus feature, if it needs "Bootloader Authorization" and you pay for authorization not the specific task !!!
- You have to select the CORRECT firmware that match your phone model before Identify !!!
- Make sure that the phone is completely powered off before connecting to PC !
- If you want to flash factory firmware, please identify using official public firmware at first and then flash with factory firmware after identify !
storage type: eMMC
name: MTK_PLATFORM_CFG
version: V1.1.8
platform: MT6768
project: merlin
storage: EMMC
bootChannel: MSDC_0
blockSize: 0x00020000
MTK Preloader file info:
Found 9 supported eMMC CID:
[SK Hynix] hB8aP 90014A68 42386150 3Exxxxxx xxxxxxxx
[Samsung] 3V6CMB 15010033 5636434D 42xxxxxx xxxxxxxx
[Samsung] 3H6CAB 15010033 48364341 42xxxxxx xxxxxxxx
[Micron] S0J9K8 13014E53 304A394B 38xxxxxx xxxxxxxx
[Samsung] DH6DAB 15010044 48364441 42xxxxxx xxxxxxxx
[Samsung] DP6DAB 15010044 50364441 42xxxxxx xxxxxxxx
[Micron] G1J9S9 13014E47 314A3953 39xxxxxx xxxxxxxx
[Micron] S0J9J8 13014E53 304A394A 38xxxxxx xxxxxxxx
[Samsung] DV6DAB 15010044 56364441 42xxxxxx xxxxxxxx
AUTH info: MTK, version: 1
Firmware package: images
BROM version[1]: 7.2021.1.0
DA: MTK_AllInOne_DA[3].bin
hash: de72b58aa3a3556eeafbf72771c921386d32aafb, size: 3.69 MiB
version: 3.3001.2020/07/02021/02/12 08:08:24, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN or VOL UP + DOWN(for newer model) to force MediaTek BootROM.
Scanning BootROM or Preloader port(30 s)... Done
Detected [BootROM] MediaTek USB Port (COM34)
Connection status: XHCI:HUB3:[#0]:USB 2.00 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 8-3-2016
Connecting Bootrom...
Requesting flash signature from server...

 

[zaza_21]

storage type: eMMC
name: MTK_PLATFORM_CFG
version: V1.1.8
platform: MT6768
project: merlin
storage: EMMC
bootChannel: MSDC_0
blockSize: 0x00020000
MTK Preloader file info:
Found 9 supported eMMC CID:
[SK Hynix] hB8aP 90014A68 42386150 3Exxxxxx xxxxxxxx
[Samsung] 3V6CMB 15010033 5636434D 42xxxxxx xxxxxxxx
[Samsung] 3H6CAB 15010033 48364341 42xxxxxx xxxxxxxx
[Micron] S0J9K8 13014E53 304A394B 38xxxxxx xxxxxxxx
[Samsung] DH6DAB 15010044 48364441 42xxxxxx xxxxxxxx
[Samsung] DP6DAB 15010044 50364441 42xxxxxx xxxxxxxx
[Micron] G1J9S9 13014E47 314A3953 39xxxxxx xxxxxxxx
[Micron] S0J9J8 13014E53 304A394A 38xxxxxx xxxxxxxx
[Samsung] DV6DAB 15010044 56364441 42xxxxxx xxxxxxxx
AUTH info: MTK, version: 1
Firmware package: images
BROM version[1]: 7.2021.1.0
DA: MTK_AllInOne_DA[3].bin
hash: de72b58aa3a3556eeafbf72771c921386d32aafb, size: 3.69 MiB
version: 3.3001.2020/07/02021/02/12 07:56:32, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN or VOL UP + DOWN(for newer model) to force MediaTek BootROM.
Scanning BootROM or Preloader port(30 s)... Done
Detected [BootROM] MediaTek USB Port (COM34)
Connection status: XHCI:HUB3:[#0]:USB 2.00 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 8-3-2016
Connecting Bootrom...
Requesting flash signature from server...
Abort failed, thread is busy! To force stop please restart application.

 

[zaza_21]

8 credits have been lost although I could not install software. please restore my credit.

 

[robkor26]

I have lost 12 credits while trying to identify mi 11. Credits has gone and error appeared. I want my credits back