UFI ISP ADAPTER VCC, VCCQ, Voltage Problem Solved

mifta

Junior Member
May 8, 2021
2
0
indonesia
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0xFF8080, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Card might be DEAD, for OLD moviNAND(Samsung) eMMC you may update the firmware with TestPoint ! ---
Check your connection, make sure eMMC inserted properly
 

KarimAfghan

Member
Jan 21, 2021
7
3
Zaranj,Afghanistan
same problem after modify isp pinout adaptor

Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.


PLS HEEEEEEEEEEEEELLLLLPPPP
 

golden fish

Junior Member
Mar 3, 2021
1
0
theni
Failed to initialize eMMC (return code: 6, CMD Error: Invalid Voltage Range) !!!
CMD1 error, cmd response: 0x40FF8080, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Card might be DEAD, for moviNAND(Samsung) eMMC you may update the firmware with TestPoint ! ---
Check your connection, make sure eMMC inserted properly.
 

allshabry354

Junior Member
Jan 19, 2022
3
1
indonesia
UFI ISP PIN ADAPTER VCC, VCCQ, Voltage Problem Return Code 17, 20, Solved
Failed to initialize eMMC (return code: 20, CMD Error: Invalid responce) !!!!
CMD1 error, cmd response: 0x0, card state:255 (Card is in unknown stat
SEND_OP_COND Command failed.
View attachment 2901

There are 2 version of UFI ISP Adapter available in the market
View attachment 2897

if you have UFI ISP Adapter V2 I hope its working fine.
But if you have UFI ISP Adapter V1 you need some modifications for it to work fine.


I hope it will work fine after these modifications.


Best Regards
Only Press Thanks Button
I use UFI ISP Adapter V2
 

allshabry354

Junior Member
Jan 19, 2022
3
1
indonesia
UFI ISP PIN ADAPTER VCC, VCCQ, Voltage Problem Return Code 17, 20, Solved
Failed to initialize eMMC (return code: 20, CMD Error: Invalid responce) !!!!
CMD1 error, cmd response: 0x0, card state:255 (Card is in unknown stat
SEND_OP_COND Command failed.


There are 2 version of UFI ISP Adapter available in the market


if you have UFI ISP Adapter V2 I hope its working fine.
But if you have UFI ISP Adapter V1 you need some modifications for it to work fine.


I hope it will work fine after these modificanbltions.


Best Regards
Only Press Thanks Button
cch
UFI ISP PIN ADAPTER VCC, VCCQ, Voltage Problem Return Code 17, 20, Solved
Failed to initialize eMMC (return code: 20, CMD Error: Invalid responce) !!!!
CMD1 error, cmd response: 0x0, card state:255 (Card is in unknown stat
SEND_OP_COND Command failed.

There are 2 version of UFI ISP Adapter available in the market


if you have UFI ISP Adapter V2 I hope its working fine.
But if you have UFI ISP Adapter V1 you need some modifications for it to work fine.


I hope it will work fine after these modifications.


Best Regards
Only Press Thanks Button
I bought 2 pieces already, the v2 one, but when I use it, the notification still looks like the picture, what should I do again, I have also changed the UFI version, even though I just bought the UFI box 3 months ago

 
  • Like
Reactions: md.robiulislam
Top