Z3X Sparx neo7 Ultra 8GB FRP_Wipe done

[malik ji]

Selected model: Sparx Neo 7 Ultra 8GB
Operation: Erase FRP
Software version: 8.8

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to NONE... OK
Connect phone to [PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM9
Port: USB\VID_1782&PID_4D00\6&2F1D3603&0&3
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T606_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: n7u8g230911351
Flash Type: UFS
Read partitions info... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : Sparx
Product Manufacturer : Deploy PVT LTD
Product Model : Sparx Neo 7 Ultra 8GB
Product Name : Neo_7_Ultra_8GB
Product Device : Neo_7_Ultra
Product Board : Neo_7_Ultra
Board Platform : ums9230
Build ID : SP1A.210812.016
Build Date : Wed Nov 15 23:52:56 CST 2023
Display ID : Sparx_Neo_7_Ultra_8GB_V04_16112023

Security Patch : 2023-10-05​

Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : 60
Userdata FS Type : F2FS
Backup partitions... OK

Formatting "persist" partition... OK​

Done!

 

[malik ji]

oppo A31 frp plus wipe

Selected model: OPPO CPH2015 (OPPO A31)
Operation: Erase FRP And Wipe
Software version: 8.8
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V2023,usb2ser_mtk.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM48 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V2023,usb2ser_mtk.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM48 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x911F7BA0, 0xCD786C41, 0x7716F219, 0x528BB322
Get Chip ID... [MT6765]
Get SOC ID... [358DAFD9AE89B12A105082E895143C7EE9463F9DC02C15EF6CCA57B58702FF70]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x13014E53304A394B391017CA063117C5
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: S0J9K9
EMMC_ID : 0x13014E53304A394B391017CA063117C5
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x1D1F000000 (116.48Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 30% - 40% device life time used
DeviceLifeTimeEstB: 10% - 20% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : OPPO
Product Manufacturer : OPPO
Product Model : CPH2015
Product Name : CPH2015
Product Device : OP4C7D
Product Board : oppo6765_19581
Board Platform : mt6765
Build ID : PPR1.180610.011
Build Date : Fri Jan 7 13:07:38 CST 2022

Display ID : CPH2015EX_11_A.61​

Security Patch : 2022-01-05
Version SDK : 28
Version Release : 9
Version Codename : REL
Firmware Version : 1641532445
Userdata FS Type : EXT4
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/OPPO_CPH2015%20(OPPO%20A31)/FRP_BACKUP_(2025-4-22_14-15-18)/

Format FRP... [P1] OK​

Writting FRP data... OK​

Formatting "userdata" partition... OK​

Formatting "cache" partition... OK​

Formatting "metadata" partition... OK​

Wipe data done!​