Legitunlocks.com
Martview MS-2D 2D Screwdriver

Samsung Tested Root Files For All Models In One Place

rajsingh

rajsingh

Winner
Aug 21, 2018
919
250
india
Samsung J6+ Root File With Full Process

*****INSTALL INSTRUCTIONS:*****

Flash with ODIN in the AP slot.

1. Put your device in DOWNLOAD mode.
(Hold POWER + VOL DOWN + VOL UP)
2. Load the file below into the AP slot, uncheck Auto-reboot and hit start.
twrp_3.2.3-1_j610_21230
3. After flashing and ODIN reports PASS immediately force reboot to recovery. Do NOT let the device boot to the OS.
You should now see TWRP recovery.
4. Flash the RMM bypass zip
https://forum.xda-developers.com/att...3&d=1524258795

NOTE: FAILURE TO FOLLOW THE STEPS ABOVE IMPLICITLY WILL RESULT IN STOCK RECOVERY REPLACING TWRP AT FIRST BOOT.

5. Reboot to TWRP (Do not boot to the OS yet)



*****OREO ROOT INSTRUCTIONS:*****


1. Flash the Forced encryption disabler patch. This is only required if you wish to have full functionality in TWRP.
Flashing this will disable Samsung's forced encryption. Disabling encryption will allow TWRP to mount the data partition.
After flashing the patch it is necessary to *FORMAT* (not wipe) the /DATA partition using the FORMAT DATA button under the wipe options.
PLEASE NOTE THIS WILL DELETE EVERYTHING ON INTERNAL STORAGE AND FACTORY RESET THE DEVICE, SO BACK UP ANYTHING YOU WISH TO KEEP.
J6+_oreo_forced_encryption_disabler

2. To root I suggest installing the latest Magisk beta as this is a currently supported project, SuperSu is no longer getting active development.
https://forum.xda-developers.com/app...mless-t3473445

3. Enjoy your rooted device.
 
rajsingh

rajsingh

Winner
Aug 21, 2018
919
250
india
  • Samsung j4 root File



  • Installed the ODIN application on your Windows PC
  • Enable OEM Unlock on your phone- In some newer Samsung phones like Galaxy Note 5 and Galaxy S6 edge+ and later, you need to enable OEM Unlock option in Developer Options.– By default the Developer Options is hidden and you need to enable the Developer Options first. Go to the below link (the link will open in a new window), enable Developer options and come back to this page:
    How To Enable Developer Options– Now when you have enabled the Developer Options, go to the Developer Options and then enable the OEM Unlock option.
HOW to INSTALL TWRP ON Galaxy J4 USING ODIN:
  • Connect the Galaxy J4 to the PC using the USB cable and install required Samsung USB driver
  • Restart the Galaxy J4 phone into download mode in order to install TWRP for Galaxy J4 using the ODIN application. Press and hold the below three buttons until you see a WARNING SCREEN! to enter into the Download mode:
    Volume DOWN key + Power key + Home key when you see the WARNING SCREEN press the volume UP key to continue into the Download mode.
  • Open the ODIN application on your Windows PC and see the device is already connected
    – At this moment I believe your phone is already connected to the PC, if not, then Connect your phone (while it is still in the download mode) to the PC using a USB cable.
    – ODIN will show an Added! message on the message box with a port number on the top left the screen of ODIN application.
  • TROUBLESHOOTING:
    – If you don’t see an Added message and a port number, then try uninstall and re-install the Samsung Driver.
    – Try a different USB driver or Install Samsung Kies to install default Samsung Drivers.

  • Then click on the AP button on the ODIN application and select the TWRP for Galaxy J4 which might be in .tar or tar.md5 file extension.

  • Select the appropriate options before flashing the twrp on Galaxy J4. Make sure only the Auto Reboot and F. Reset Time are checked and all other boxes are unchecked.

  • Select the Start button, which will start the flashing process. When you get the PASSmessage, then your phone will reboot automatically.

  • TROUBLESHOOTING:
    – If you see a FAIL message on the screen then read the log on the left side of the ODIN application and try to FIX the ERROR.
  • That’s all.
What to do after you install TWRP for Samsung Galaxy J4 :
Now your Samsung Samsung Galaxy J4 is installed with the TWRP recovery and you may disconnect your phone. Here are some more guides using the TWRP recovery:
Well, this isn’t it. You can install customized themes, sound mods, Xposed modules etc. after installing the TWRP on Samsung Galaxy J4.
But before you can use the TWRP on Samsung Galaxy J4, you have to bypass the RMM lock.
Follow the below step by step instructions to bypass the RMM lock on Samsung Galaxy J4.
REQUIRED DOWNLOADS OR LINKS FOR ROOTING Galaxy J4:
  • Make sure you have already installed TWRP for Galaxy J4
    – Well, this is a very important aspect to ROOT Galaxy J4. The SuperSU zip file is developed in a way to be installed via a TWRP recovery or another custom recovery. Stock recovery may not be able to install this SuperSU or Magisk ROOT on Galaxy J4.
  • Download the latest SuprSU ROOT or the Magisk ROOT for Galaxy J4 or one of the following:
IMPORTANT NOTE:
  • The Galaxy J4 rooting will not work just by installing the SuperSU APK fileon your Android phone.
  • SuperSU APK Free or Pro version is just a SuperSU ROOT management application.
  • The SuperSU APK Free or Pro app will ONLY work if you have already ROOTED your Android Phone.
The step-by-step guide on how to ROOT Galaxy J4 using SuperSU or Magisk ROOT zip file:
Galaxy J4 ROOTING with Galaxy J4 TWRP recovery
  1. Download and copy the SuperSU or Magisk ROOT file to Galaxy J4. (I hope you have already downloaded the SuperSU zip file from the above downloads section)
  2. Now restart the Galaxy J4 to boot into TWRP recovery.
  3. Then, Select the Install from TWRP home screen, then select the SuperSU ROOT zip file from the file browser.
  4. Flash or install the SuperSU or Magisk ROOT zip file for Galaxy J4, by Sliding the Swipe to Confirm Flash on TWRP screen. Here is a screenshot of how to flash the SuperSU ROOT for Galaxy J4 via TWRP:
  5. Wait for TWRP to flash the no-verity-opt-encrypt.zip file and RMM bypass zip file on Samsung Galaxy J4. Once the flashing is done just reboot your device.
  6. Profit!!! You should now have a fully featured TWRP on Samsung Galaxy J4.
If you face any problems with this guide to install TWRP for Samsung Galaxy J4 then, you can log in and reply here. Either I or some other user on this forum will revert back to your query as soon as possible.
How to check if ROOT is enabled on Galaxy J4 or NOT?
Install the ROOT checker app from the Play Store and verify if your phone is ROOTED or not.
If you face any problems on this guide to install TWRP for Galaxy J4 then, you can log in and reply here. Either I or some other user on this forum will revert back to your query as soon as possible.
Stay tuned or Subscribe to the Samsung Galaxy J4 forum For other Android Custom ROMs, LineageOS ROMs, and all other device-specific topics
 
  • Like
Reactions: Fauzan azmi
rajsingh

rajsingh

Winner
Aug 21, 2018
919
250
india
Samsung A7 2018 Root File And Process


Steps To Root Galaxy A7 2018 Using Magisk
First of all, we need to unlock the device bootloader on Samsung Galaxy A7 2018. Then you can continue with the next steps. After this, we need to download and flash the patched ramdisk file which we mentioned above.

Remember,

  • After Rooting, it may void the warranty of your phone.
  • Rooting will block the OTA updates
Download Stock ROM and Extract the Boot Image
Here is the link for the same.

Download the patched boot image here. - You should be running A750FN(U1ARIC) Firmware
To build your own magisk patched boot image, then follow this guideline on how to Create Patched Stock Boot Image using Magisk

Before moving on to the flashing steps, you need to follow a few,
Pre-Requisites
  • Make sure to have enough battery charge on your phone to avoid interruption during the patch installation.
  • Before performing any modification take backup of your device data.
  • This image file is strictly for Samsung Galaxy A7 2018 only. Do not use it on any other Samsung or other Android devices.
  • Download Latest ODIN File
  • A PC/Laptop and a micro USB cable.
  • Drop the Patched boot image file inside your ADB/Fastboot folder
  • Install Samsung USB Drivers.
Disclaimer: We are at GetDroidTips will not be responsible for any bricking/damage to your phone while/after installing this ROM.
How To Install the Patched Boot Image on Samsung Galaxy A7 2018 (SM-A750)

Assuming that you have used our above instruction and unlocked the bootloader, we will continue on flashing the patched boot image.
  • First, let's begin by booting our phone into download mode.
  • Connect your phone to PC using the USB cable
  • Once you are connected, now open the downloaded ODIN exe
  • When you connect the USB cable you will see a blue sign in Odin
  • Now Load the patched boot tar file in the AP section.
  • Make sure re-partition is NOT ticked – Go to Option and see (Let the Auto Reboot and F-Reset Time be ticked)
  • Now tap on the start button to root your device.
  • Once it is done, your device will reboot.
  • First boot will take some time.
So, that's it. Now that you have rooted your Samsung Galaxy A7 2018 (SM-A750), you can try this out. If you have any queries regarding this, do let us know.
 
rajsingh

rajsingh

Winner
Aug 21, 2018
919
250
india


When it comes to third-party development, Samsung devices as a whole are a peculiar case. The flagships are quite popular but they often divide the development with a locked down Snapdragon version for the US and some other markets. The Internationally sold Exynos variants are often way ahead in terms of third-party support. Samsung’s more affordable devices don’t really get as much developer love. It’s generally a hit or a miss. If you bought the Samsung J2 Pro 2018, you can at least now root your device and install TWRP on it.
Warning
You probably know already, rooting will void your warranty. To root your device you will be relying on third-party tools and software. None of these third-parties, nor us, will take any blame in case you end up harming your device. You must understand the risks involved and take full responsibility for your actions. You can proceed with confidence that the method does work. Still, things can go wrong. In which case, you must understand that you were warned, and you still went with it anyway. Therefore, DroidViews cannot be held liable for any damage to your device.
Requirements
  • A Samsung Galaxy J2 Pro 2018 with an unlocked bootloader.
  • A Windows computer with ADB and fastboot installed and set up. We do have a dedicated, detailed guide on how to do just that. You can check it out by following the links below.
  • You will also need to install the latest Samsung USB Drivers in order to get things working.
  • Enable USB debugging and OEM Unlock on your Galaxy J2 Pro. To do this go to your Settings > About phone > Software information. Now tap on the Build number 7 times until you see a toast message “Developer option enabled”. Go back to Settings and you should see Developer Options listed towards the bottom. Tap on it and enable OEM Unlock and USB Debugging. In case you don’t see an OEM Unlock option here, there’s currently no workaround so you will just have to wait until there is.
  • Ensure that your Galaxy J2 Pro has at least 70% battery.
  • The process does require you to format your device so make sure you have backed up everything important, including files and folders on your device’s internal storage.
Downloads
Install TWRP & Root Samsung Galaxy J2 Pro 2018 (SM-J250F)
  1. Turn off your Galaxy J2 Pro then hold down the Volume Down + Home + Power keys. When you see a change on the screen let go of all the buttons and select OK with the Volume Up key. This will boot your device into download mode.
  2. Run Odin on your PC and disable Auto reboot under the Options tab. You should be seeing the ID: COM port in blue on Odin which means it can detect your device.
  3. Click on the AP button in Odin and select the downloaded TWRP tar file then click on the Start button.
    Selecting TWRP image file in Odin Galaxy S9 Plus
  4. When TWRP has been successfully flashed, you’ll see a PASS! message on Odin.
  5. Disconnect the device and then press and hold down the Volume down and Power button until the screen goes off. Once it does, immediately press and hold the Power + Volume up and Home buttons to reboot into recovery.
  6. When you get past the TWRP splash screen, swipe at the bottom to allow modifications. If you do this, you’ll have to flash the dm-verity zip linked above in the downloads section too which is what we recommend if you don’t want to keep flashing TWRP every time.
  7. Once in the main menu, select Wipe > Format data and type yes to perform a factory reset. This will wipe everything on your device including your device’s internal storage.
  8. After the format is complete, go back to the main menu and select Reboot > Recovery.
  9. When you’re back in the recovery, tap on Install button.
  10. Navigate to the external storage where you transferred or downloaded the Magisk zip file and select it.
  11. Swipe at the bottom to flash the file and then similarly flash no-verity-no-encrypt-5.1.
  12. Tap on the Reboot system button when it appears after the process is complete.
  13. When your Galaxy J2 Pro 2018 boots up, open the Magisk app to verify root.
Source: xda
 
K

kandiero

Member
Dec 27, 2016
12
3
MOZAMBIQUE
rajsingh said:
1.Enable Developer Option (settings - about phone - Software information - Tap 7 times on build number to activate developer option in settings menu)
2.Enable OEM Unlock from developer option (Currently no workaround for those who doesn't have this option )
3.Download TWRP for S9 or S9+
4.Switch Off device
5.Press Vol down + Bixby + Power to reboot to download mode, press volume up when asked to continue to download mode
6.Download Odin and open it, Disable 'Auto reboot' from option menu of Odin
7.Select TWRP (tar image) with AP tab of Odin and Start
8.Once Successfully flashed, you will see 'Passed' in Odin tab
9.Disconnect device and hold Vol down + power till screen goes off, Now immediately press Vol Up + Bixby + Power to reboot to TWRP
10.Select to allow modification
11.From TWRP, Select WIPE menu - Then FORMAT DATA - You need to type 'yes' to perform wipe. WARNING : This will erase all data including Int SD storage from device
12.Once format device completes, go back and select REBOOT' Menu and then - 'RECOVERY', This will reboot to TWRP again
13.Flash no-verity-opt-encrypt-samsung-1.0 and then Magisk
14.Once flash successfully finish, Reboot to System
15.Open settings - Developer option - Look for OEM Unlock option. It will automaticaly change to unticked after some reboot don't stress it's normal.
16.MAKE A BACKUP IN CASE OF BOOTLOADER RELOCK.


Samsung S9 Twrp

Samsung S9 Plus Twrp
Click to expand...
i am getting this error when l am flashing with twrp Only official released binaries are allowed to be flashed.How to solve it
 
You must log in or register to reply here.
Top