Operation : Multi Flash
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM10)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1D01400 [SDM662] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM662]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SDM662, UFS, 64 GB
LU Count : 6 [0x00DD4800] [0x00000800] [0x00000800] [0x00008000] [0x00100000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi
Software : Android-Q-build-20220805210921, V12.5.10.0.RJQINXM [Fri Aug 5 21:10:12 CST 2022]
Android Ver. : 11
Patch Level : 2022-08-01
Processing [rawprogram0.xml]
Writing [vbmeta_system.img] -> [vbmeta_system] ...Done
Writing [persist.img] -> [persist] ...Done
Writing [recovery.img] -> [recovery] ...Done
Writing [super.img ] -> [super]...Done
Writing [userdata.img ] -> [userdata]...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram1.xml]
Writing [xbl_config.elf] -> [xbl_config] ...Done
Writing [xbl.elf] -> [xbl] ...Done
Writing [gpt_main1.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup1.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram2.xml]
Writing [xbl_config.elf] -> [xbl_configbak] ...Done
Writing [xbl.elf] -> [xblbak] ...Done
Writing [gpt_main2.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup2.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram3.xml]
Writing [gpt_main3.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup3.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram4.xml]
Writing [multi_image.mbn] -> [multiimgoem] ...Done
Writing [vbmeta.img] -> [vbmeta] ...Done
Writing [qupv3fw.elf] -> [qupfw] ...Done
Writing [devcfg.mbn] -> [devcfg] ...Done
Writing [storsec.mbn] -> [storsec] ...Done
Writing [hyp.mbn] -> [hyp] ...Done
Writing [hyp.mbn] -> [hypbak] ...Done
Writing [cmnlib.mbn] -> [cmnlib] ...Done
Writing [cmnlib.mbn] -> [cmnlibbak] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64bak] ...Done
Writing [km4.mbn] -> [keymaster] ...Done
Writing [km4.mbn] -> [keymasterbak] ...Done
Writing [BTFM.bin] -> [bluetooth] ...Done
Writing [abl.elf] -> [abl] ...Done
Writing [abl.elf] -> [ablbak] ...Done
Writing [imagefv.elf] -> [imagefv] ...Done
Writing [imagefv.elf] -> [imagefvbak] ...Done
Writing [uefi_sec.mbn] -> [uefisecapp] ...Done
Writing [uefi_sec.mbn] -> [uefisecappbak] ...Done
Writing [featenabler.mbn] -> [featenabler] ...Done
Writing [featenabler.mbn] -> [featenablerbak] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [rpm.mbn] -> [rpmbak] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [tz.mbn] -> [tzbak] ...Done
Writing [logfs_ufs_8mb.bin] -> [logfs] ...Done
Writing [dtbo.img] -> [dtbo] ...Done
Writing [dspso.bin] -> [dsp] ...Done
Writing [boot.img] -> [boot] ...Done
Writing [NON-HLOS.bin] -> [modem] ...Done
Writing [cache.img ] -> [cache]...Done
Writing [gpt_main4.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup4.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram5.xml]
Writing [gpt_main5.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup5.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Set Boottable Storage Drive to 1...Done
Reading Partition Table...OK
Resetting FRP Lock.......Done
Resetting device...Done
Operation Finished.
QcFire Ver. 8.6
