UMT Post Here Sucessfully Unlocked/Repair Phones With Umt Tool

[GsmToto]

Job: Remove FRP
SELECTED: Tiger T606 Ver2
ACTION: Erase FRP
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM8)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
UID: 00742a48080b4f87
FileSystem: UFS
Read partition info is supported by loader.
CPU NAME: T606
Removing frp, wait...
[1]FRP: persist
Format OK.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\UMT\unisoc_module\spreadtrum_module_backup_folder\Saved_Logs\_erase_frp_4.txt
Total Time: 00:00:35
Done.

 

[GsmToto]

Port : COM4 : LGE AndroidNet USB Serial Port (COM4)
Baud Rate : 115200
Device : LG Android
Operation : Write IMEI/MEID
Opening Port... OK
Reading Phone Information... OK
Compile : Dec 19 2013 14:24:05
Release : Aug 05 2013 17:00:00
Hw Ver. : D802
Build : M8974A-AAAANAZM-1.0.190036
IMEI 1 : 357***********
IMEI 2 : 35************
MEID : 357**********
Resetting Security... Done
Port : COM4 : LGE AndroidNet USB Serial Port (COM51)
Opening Port... OK
Writing IMEI 1 [35xxxxxxxxxxx]... OK
New IMEI : 35xxxxxxxxxxxxxx
Rebooting Phone... Done
Please reboot maunally if does not reboot automatically.
Operation Finished.
Elapsed Time: 00:45
[Module Ver. 5.5.1]

 

[GsmToto]

Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM7
Port Name: LGE Mobile USB Serial Port (COM65)
Path: \\?\usb#vid_1004&pid_6000#6&10354432&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Preloader Mode Detected, Trying to crash...
- Success!
Port: COM4 [MediaTek USB Port (COM7)]
Device Path: \\?\usb#vid_0e8d&pid_0003#6&10354432&0&3#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0326, [MT6750/MT6755/M/T/S] [Helio P10/P15/P18]
Hardware Info: 0x8A00, 0xCB00, 0x01
Config : [SecureBoot: True] [SLA: False] [DA Auth: True]
MEID: E0D82A9A979F0EDB5BA90E2A603CF354
Preparing device...
-- Success!
Preloader saved as : preloader_muse6750_lv5_o_240212_145143.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM7)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connecting to HighSpeed Port...
Waiting for HighSpeed Port..
Port : MediaTek DA USB VCOM (Android) (COM7)
device path: \\?\usb#vid_0e8d&pid_2001#6&10354432&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
Brand : lge
Manufacturer : LGE
Model : LG-M250
Prod. Name : mlv5_global_com
Device : mlv5
Board : mt6755
Build Date : Wed Sep 26 20:54:35 IST 2018
Build Flavor : mlv5_global_com-user
Build Desc. : mlv5_global_com-user 8.1.0 O11019 1827000245019 release-keys
Platform : mt6750
Android Ver. : 8.1.0
Display ID : O11019
Patch Level : 2018-09-01
Data missing! Could not read extended information!
Userdata is ENCRYPTED
Formatting Userdata...
- Success!
Seeking FRP Data...
Resetting FRP...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 5.1]

 

[GsmToto]

Device : LG Velvet 5G
Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1B00800 [8998] 00003100
OPK_DATA : 40BB0AD3F0C02F1724FD90AE38EC8E4E7BE2BC32D34D741AC2 633B9AD0DCC50B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8998_008]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8998, UFS, 128 GB
LU Count : 7 [0x01D8E800] [0x00000800] [0x00000800] [0x00000800] [0x0003C000] [0x00000800] [0x00000800]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Software : , 230690118a5f6 [Thu Mar 9 21:45:09 IST 2023]
Android Ver. : 12
Patch Level : 2023-03-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock.......Done

 

[Fahad Ahmad]

Infinix Hot 30 (X6831) IMEI Repair Android 13 | Locked Bootloader | Preloader Mode | Fahad Ahmad

Thanks, UMT Team!
LIKE | SHARE | SUBSCRIBE
​

 

[mian.sajid]

If u find my post helpful ,Like button is just 1 Click away! ​

 

[enocleus]

Galaxy S23 ultra

Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...Done
Protocol v3 or higher detected. Auto Loader unsupported.
Initializing Protocol...OK
Using Pre-Defined Loader [SMS918B_U3.ufl]
Preparing Loader...Done
Sending Loader [SMS918B_U3]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : , UFS, 256 GB
LU Count : 6 [0x03B64000] [0x00001400] [0x00001400] [0x00002000] [0x00028000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK [Sign]
Build : S918BXXS3BWL3
Int. Build : SM-S918B_EUR_XX_QKEY1
Bypassig KG Lock... Done Done Done Done
Once phone reboot in Odin Mode, full flash your device.
Operation Finished.
QcFire Ver. 9.3

reflash after procedure connect wifi knox still auto download

 

[Durgesh12]

UMT New Update 2024 | UMT 2024 New Big Big Update MTK | Vivo Demo Unlock | Samsung Unbrick

 

[RizwanKKC]

Vivo Y21A FRP Bypass February 2024 Security PL Exploit 1 Click UMT Tool

 

[perata]

Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port
Driver Info : Network Connect, qcusbser.sys, 3.0.0.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1B09000 [8936] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8936_038]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8936, EMMC, 16 GB
LU Count : 3 [0x01D5C000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : bq Aquaris M5 [msm8916] [Aquaris_M5]
Brand : bq
Prod.Name : Aquaris_M5
Software : 3.2.9_20160226-0927, 3.2.9_20160226-0927 [Fri Feb 26 10:08:12 CST 2016]
Android Ver. : 5.1.1
Patch Level : 2016-01-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 8.6

 

[SPYROS]

vivo Y33s frp bypass one click​

Please login to view image

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
PL Exploit : VIVO
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM86)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&34d69527&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 21DEF08980694494E15A0FB191DF7368
SoC ID[0] : DA74A2D052F732A0D648AFBAE4F5E328
SoC ID[1] : A6D367910265E6557E5FF9B7E2CBEA24
WARNING! DA Auth is Enabled! Only Special DA will work!
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT...Done
Sending 2nd DA...OK
Loading Extension...Done
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : WV6JMB
CID : 1501005756364A4D42044200E49B88E7
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000001D1EC00000 [116.48 GB]
Connected to High-Speed DA Port
Reading Partition Table...OK
Manuf. : vivo
Ven. Model : V2109
Prod. Model : PD2147F_EX
Platform : mt6768
And. Ver. : 11
Prod. Ver. : PD2147F_EX_A_1.9.1
Hw. Ver. : PD2147F_EXMA
Build Dt. : Fri Sep 24 16:51:24 CST 2021
Display ID : RP1A.200720.012 release-keys
Ver. Inc. : eng.compil.20210924.165321
Locale : en-US
Patch : 2021-09-01
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v0.8]
Log Saved : 20240318_162620.log

 

[y2ksalman]

after this is stuck on recovery how to solve this issue

 

[Abaidvirk]

Vivo Y21A FRP Bypass February 2024 Security PL Exploit 1 Click UMT Tool

View attachment 64482

working 100 thanks a lot brother for usefull post appreciated

 

[Tahirshinwari]

i dont have chimera tool pro vivo y95 1807 baseband known need solution

 

[SPYROS]

Oppo A37
factory reset and reset frp done

Please login to view image

Device : Oppo A37f
Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM59)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1507000 [8916] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_014]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8916, EMMC, 16 GB
LU Count : 3 [0x01D5A000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : OPPO A37f [msm8916]
Brand : OPPO
Prod.Name : A37f
Software : A37fEX_11_190711, 1480422943 [Thu Jul 11 03:29:34 CST 2019]
Android Ver. : 5.1.1
Patch Level : 2018-03-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 9.2

 

[Harsh gsm]

YU4711 FRP DONE WITH UMT QCFIRE V9.3​

Please login to view image

 

[Jenny stroke]

thanks for sharing

snaptube vidmate​

 

[RizwanKKC]

iPhone 6s iOS 15.8.1 iCloud Bypass Done By UMT Tool

Please login to view image

Please login to view image

Please login to view image

Watch Video:

 

[RizwanKKC]

working 100 thanks a lot brother for usefull post appreciated

Thanks

 

[shahidmalik]

always use erase methods