UMT Post Here Sucessfully Unlocked/Repair Phones With Umt Tool
- Thread starter Abdullah
- Start date
UMT Box
- Status
Sumitmr023
Active Member
Lenovo K33 FRP Unlock done
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM20)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.1.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1F00400 [8937] 2A7A0000
OPK_DATA : C94306FF09FC94E60BC36DBEFB7F88648D7764E5313003FECA69404ACB06A874
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_008]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8937, eMMC, 16 GB
LU Count : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : LENOVO Lenovo K33 [msm8937] [K33]
Brand : Lenovo
Prod.Name : karate
Software : K33_S143_160926_ROW, K33_S143_160926_ROW [2016年 09月 26日 星期一 18:47:46 CST]
Android Ver. : 6.0.1
Patch Level : 2016-06-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 5.8
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM20)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.1.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1F00400 [8937] 2A7A0000
OPK_DATA : C94306FF09FC94E60BC36DBEFB7F88648D7764E5313003FECA69404ACB06A874
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_008]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8937, eMMC, 16 GB
LU Count : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : LENOVO Lenovo K33 [msm8937] [K33]
Brand : Lenovo
Prod.Name : karate
Software : K33_S143_160926_ROW, K33_S143_160926_ROW [2016年 09月 26日 星期一 18:47:46 CST]
Android Ver. : 6.0.1
Patch Level : 2016-06-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 5.8
NOKIA 6.1 PLUS TA1083
FLASHING SUCCESS
FRP SUCCESS android 10
BY UMT 5.9
USE NB0 FILE
LOVE YOU UMT TEAM
FLASHING SUCCESS
FRP SUCCESS android 10
BY UMT 5.9
USE NB0 FILE
LOVE YOU UMT TEAM
vivo 1807 User Lock / FRP reset done
Device : Vivo Y95
Operation : Vivo Format FS / FRP Reset
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM20)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.1.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1F00B00 [8937] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4FFF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_029]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8937, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : vivo vivo 1807 [msm8937_64]
Brand : vivo
Prod.Name : msm8937_64
Software : OPM1.171019.026 release-keys, eng.compil.20200616.101753 [Tue Jun 16 10:17:53 CST 2020]
Android Ver. : 8.1.0
Patch Level : 2020-06-01
Formatting userdata...Done
Resetting FRP Lock...Done
Wipe cache / userdata from Recovery and reboot.
First startup may take 2-5 minutes.
Operation Finished.
QcFire Ver. 5.9
Device : Vivo Y95
Operation : Vivo Format FS / FRP Reset
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM20)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.1.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1F00B00 [8937] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4FFF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_029]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8937, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : vivo vivo 1807 [msm8937_64]
Brand : vivo
Prod.Name : msm8937_64
Software : OPM1.171019.026 release-keys, eng.compil.20200616.101753 [Tue Jun 16 10:17:53 CST 2020]
Android Ver. : 8.1.0
Patch Level : 2020-06-01
Formatting userdata...Done
Resetting FRP Lock...Done
Wipe cache / userdata from Recovery and reboot.
First startup may take 2-5 minutes.
Operation Finished.
QcFire Ver. 5.9
please provide the flash file of this nokia 6.1 plus android 10 .nbo file
XIAOMI REDMI NOTE 4G HANG ON LOGO SOLVED BY UMT
READ INFO
FLASHING DONE
READ INFO
FLASHING DONE
kabirsoft
Active Member
- Oct 4, 2019
- 62
- 16
radmi 5 Disabling Mi Account Relock
Operation : Mi Anti Relock
Checking for device in ADB mode...Found!
Searching for Device in ADB Mode...Found
Brand : Xiaomi
Model : Redmi 5
Product : rosy
Device : rosy
Andriod Ver. : 8.1.0
Patch Level : 2019-06-01
Bootloader : unknown
Build ID : CUSTOMER_VERSION_rosy
Build Date : Thu Jun 27 00:46:15 WIB 2019
Disabling Mi Account Relock...Verified OK... Done
Operation Finished.
QcFire Ver. 6.0
Operation : Mi Anti Relock
Checking for device in ADB mode...Found!
Searching for Device in ADB Mode...Found
Brand : Xiaomi
Model : Redmi 5
Product : rosy
Device : rosy
Andriod Ver. : 8.1.0
Patch Level : 2019-06-01
Bootloader : unknown
Build ID : CUSTOMER_VERSION_rosy
Build Date : Thu Jun 27 00:46:15 WIB 2019
Disabling Mi Account Relock...Verified OK... Done
Operation Finished.
QcFire Ver. 6.0
XIAOMI REDMI 5 MI ACCOUNT REMOVED BY UMT
READ INFO
RESET MI AC
READ INFO
RESET MI AC
riponcht
Junior Member
Operation : Flash
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM10)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1C00800 [8976] 04007300
OPK_DATA : A103747D6F285B7FDDA476A5E985F67EB8D73574FB572BC34535197B5417B2E1
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8976_017]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : MSM8996, eMMC, 128 GB
LU Count : 1 [0x0E8F6000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 131072, Sector Size: 512
Writing [xbl.elf] -> [xbl] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [rpm.mbn] -> [rpm] ...Failed
Operation Finished.
QcFire Ver. 6.0
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM10)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1C00800 [8976] 04007300
OPK_DATA : A103747D6F285B7FDDA476A5E985F67EB8D73574FB572BC34535197B5417B2E1
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8976_017]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : MSM8996, eMMC, 128 GB
LU Count : 1 [0x0E8F6000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 131072, Sector Size: 512
Writing [xbl.elf] -> [xbl] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [rpm.mbn] -> [rpm] ...Failed
Operation Finished.
QcFire Ver. 6.0
ywavdhane
Junior Member
- Sep 26, 2019
- 2
- 0
world's First asus zenfone max M1. X00PD IMEI REPAIR DONE UMT DONGLE
Port : COM24 : Qualcomm HS-USB Android DIAG 901D (COM24)
Baud Rate : 921600
Device : Qualcomm Android
Operation : Write IMEI [UMT Method [2]]
Opening Port... OK
Reading Phone Information... OK
Compile : Jan 10 2019 20:23:12
Release : Sep 27 2018 23:00:00
Hw Ver. : 8937.gen
Build : MPSS.JO.3.0-00398-8937_GENNS_PACK-1.167479.0.171473.1
IMEI [1] : 000000000000000
IMEI [2] : 000000000000000
Method : UMT Method [2]
Writing IMEI 1 [91156875xxxxxxx]... Done
Writing IMEI 2 [91156875xxxxxxx]... Done
Please reboot maunally if does not reboot automatically.
Operation Finished.
Elapsed Time: 00:03
[Module Ver. 5.5]
100% DONE
Port : COM24 : Qualcomm HS-USB Android DIAG 901D (COM24)
Baud Rate : 921600
Device : Qualcomm Android
Operation : Write IMEI [UMT Method [2]]
Opening Port... OK
Reading Phone Information... OK
Compile : Jan 10 2019 20:23:12
Release : Sep 27 2018 23:00:00
Hw Ver. : 8937.gen
Build : MPSS.JO.3.0-00398-8937_GENNS_PACK-1.167479.0.171473.1
IMEI [1] : 000000000000000
IMEI [2] : 000000000000000
Method : UMT Method [2]
Writing IMEI 1 [91156875xxxxxxx]... Done
Writing IMEI 2 [91156875xxxxxxx]... Done
Please reboot maunally if does not reboot automatically.
Operation Finished.
Elapsed Time: 00:03
[Module Ver. 5.5]
100% DONE
ywavdhane
Junior Member
- Sep 26, 2019
- 2
- 0
VIVO Y30 LOCK & FRP REMOVE DONE BY UMT MTK TOOL
Brand : Vivo
Model : Y30
Operation : Format FS
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM10)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Data missing! Can not read information!
Userdata is NOT ENCRYPTED
Formatting userdata...
- Done.
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 3.2]
DONE
Brand : Vivo
Model : Y30
Operation : Format FS
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM10)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Data missing! Can not read information!
Userdata is NOT ENCRYPTED
Formatting userdata...
- Done.
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 3.2]
DONE
taimur-ahmad
Moderator
Device : Oppo A57
Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM50)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID : E1B00600 [8937] 00000000
OPK_DATA : 2729EC539F0C70FA21C67CD1B8C249998B3D85E480BE31DB27277ABB926ECC2D
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_009]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8937, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : OPPO OPPO A57 [msm8937] [A57]
Brand : OPPO
Prod.Name : A57
Software : A57_11_A.19_170424, eng.root.20170424.005625 [Mon Apr 24 00:59:17 CST 2017]
Android Ver. : 6.0.1
Patch Level : 2017-03-05
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 6.1
MI A2 Lite Reset FRP Done
Code:
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM28)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Auth Enabled Device! You need Mi Auth Account to service!
Skipping Auth...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : [daisy_sprout]
Software : QKQ1.191002.002.V11.0.10.0.QDLMIXM, V11.0.10.0.QDLMIXM [Tue Aug 11 09:24:23 WIB 2020]
Android Ver. : 10
Patch Level : 2020-08-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 6.1Lenovo L38011 [k5] Format FS
Code:
Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM28)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1F00400 [8937] 00000000
OPK_DATA : 9A3BE293E298555C1AA96321648FB1CD5F66EE326534457DD67958BDB00D5656
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_030]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8937, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Lenovo Lenovo L38011 [k5]
Brand : Lenovo
Prod.Name : k5
Software : OPR1.170623.032 dev-keys, 3.7.255_180917 [Mon Sep 17 01:16:26 CST 2018]
Android Ver. : 8.0.0
Patch Level : 2018-07-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 6.1- Status