Z3X Post here successfully Unlocked / Repaired / Flashed Phones with Pandora's 2021

[GsmToto]

Selected model: Motorola XT2016-1 (Motorola One Macro)
Operation: Erase FRP
Software version: 5.0

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Connect phone to [BOX] in BROM mode
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0788
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6771]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM11 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0788
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6771]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x90555C7F, 0xE70D385B, 0x1C2BFB29, 0x8AEF1C1D
Get Chip ID... [MT6771]
Get SOC ID... [33F1EE2A46C5BEBD852D5AB3D51722C6B544C1658D5306BACF 8A8B8BE3540EE7]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [9]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x90014A68433861503E032303AC4D96F1
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: hC8aP>
EMMC_ID : 0x90014A68433861503E032303AC4D96F1
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x0000039000 (228.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : motorola
Product Manufacturer : motorola
Product Model : motorola one macro
Product Name : lima_retail
Product Device : lima
Product Board : lima
Board Platform : MT6771
Build ID : PMDS29.70-81-5
Build Date : Thu Jun 25 08:49:10 CDT 2020
Security Patch : 2020-07-01
Version SDK : 28
Version Release : 9
Version Codename : REL
Firmware Version : 9047c
Userdata FS Type : F2FS
Read partitions info from phone... OK
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Motorola_XT2016-1%20(Motorola%20One%20Macro)/FRP_BACKUP_(2023-5-11_11-1-44)/"directory
Writting FRP data... OK
Erase FRP done!

 

[GsmToto]

Selected model: Motorola XT2128-1 (Motorola Moto G20)
Operation: Erase FRP
Software version: 5.0
Work ID: 2320842

Waiting for device... OK
Device found at COM38
Port: USB\VID_1782&PID_4D00\5&30CD2A0&0&4
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Connecting to device... OK
Selected processor: Tiger_T700_64
Load files... OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: ZY32C8LQ75
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : motorola
Product Manufacturer : motorola
Product Model : moto g(20)
Product Name : java_retail
Product Device : java
Product Board : p352
Board Platform : ums512
Build ID : RTAS31.68-66-3
Build Date : Tue Feb 21 13:40:32 CST 2023
Display ID : RTAS31.68-66-3
Security Patch : 2023-03-01
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 66-3
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Done!

 

[GsmToto]

Selected model: Itel A551L (Itel A27)
Operation: Erase FRP
Software version: 5.0

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC]
Waiting for device... OK
Device found at COM12
Port: USB\VID_1782&PID_4D00\5&E901492&0&2
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Connecting to device... OK
Selected processor: SC9832E
Load files... OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 080003121N022
Read partitions info... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : Itel
Product Manufacturer : ITEL MOBILE LIMITED
Product Model : itel A551L
Product Name : SU360O
Product Device : itel-A551L-Pro
Product Board : A551L
Board Platform : sp9832e
Build ID : RP1A.201005.001
Build Date : Wed Feb 15 18:55:13 CST 2023
Display ID : A551L-Pro-SU360O-11.0-OP-V028-20
Security Patch : 2023-02-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : OP-V028-20230215
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Done!

 

[jalal123]

Australian single sim OPPO A16s network unlock error

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Connect phone to [BOX] in BROM mode
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM6 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x8AF218F3, 0x4E7EE851, 0xC96058AE, 0xE675653F
Get Chip ID... [MT6765]
Get SOC ID... [C7A81304222E8CC438BAA837CF2FD097C52D9A977391D00CE2FC8CD44925C19C]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x90014A68433861503E031012E05E9803
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: hC8aP>
EMMC_ID : 0x90014A68433861503E031012E05E9803
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : alps
Product Manufacturer : alps
Product Model : oplus_mssi_64_cn
Product Name : sys_oplus_mssi_64_cn
Product Device : oplus_mssi_64_cn
Product Board : oppo6765
Board Platform : MT6765
Build ID : RP1A.200720.011
Build Date : Fri Jul 23 03:33:33 CST 2021
Display ID : RP1A.200720.011 release-keys
Security Patch : 2021-08-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 1626981447835
Userdata FS Type : F2FS
Read security partition from phone... OK
Read security files... OK
Read security files... OK
Read lock info... error(1)

Selected model: OPPO CPH2271 (OPPO A16s)
Operation: Unlock network
Software version: 5.0

 

[mobilefixx]

oppo f11 pro cph1969 after repair iemi phone restart on logo i restore backup still same help me

Wipe data

 

[gsmshimul]

Samsung A10s Frp remove by Pandora box

 

[adnan_sabir831]

Itel A661L (A49) Done

Selected model: Itel A661L (Itel A49)
Operation: Erase FRP And Wipe
Software version: 5.4
Work ID: 4846772

Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM18
Port: USB\VID_1782&PID_4D00\6&236CC9F3&0&1
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: SC9832E
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 076574025Y003370
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : Itel
Product Manufacturer : itel
Product Model : itel A661L
Product Name : A661L
Product Device : itel-A661L
Product Board : A661L
Board Platform : sp9832e
Build ID : RP1A.201005.001
Build Date : Tue Aug 2 18:50:18 WIB 2022
Display ID : A661L-V490AE-11.0-OP-V022-202208
Security Patch : 2022-07-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : OP-V022-20220802
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Creating default filesystems... [CACHE: EXT4] ... [USERDATA: F2FS] ... OK
Done!

 

[hermann07]

Samsung A042F READ INFO ERROR PLEASE FIX IT
Get device info... OK
EMMC_ID: 0x150100345836324D4200F6E1E4C8B9B7
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [7]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: 4X62MB
EMMC_ID : 0x150100345836324D4200F6E1E4C8B9B7
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x0747C00000 (29,12Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232,00Kb)
EXT_RAM : 0x00C0000000 (3,00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [F2FS] ...
Exception: No mapping for the Unicode character exists in the target multi-byte code page

 

[sufi88]

Tecno BC2c (Tecno Pop 4)
Erase FRP And Wipe Done
Selected model: Tecno BC2c (Tecno Pop 4)
Operation: Erase FRP And Wipe
Software version: 7.5

Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM77
Port: USB\VID_1782&PID_4D00\6&298C69D9&0&1
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: skip(6)
Connecting to device... OK
Selected processor: SC7731E
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 06150150CK001687
Read partitions info... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO
Product Model : TECNO BC2c
Product Name : BC2c-OP
Product Device : TECNO-BC2c
Product Board : sp7731e_1h10
Board Platform : sp7731e
Build ID : QP1A.190711.020
Build Date : Fri Aug 6 14:31:36 CST 2021
Display ID : BC2c-SP592AB-QGo-OP-210806V011
Security Patch : 2021-08-05
Version SDK : 29
Version Release : 10
Version Codename : REL
Firmware Version : AB-OP-210806V011
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Creating default filesystems... [CACHE: EXT4] ... [USERDATA: F2FS] ... OK
Done!

 

[sufi88]

Infinix X6516 (Infinix Smart 7 HD)
Selected model: Infinix X6516 (Infinix Smart 7 HD)
Operation: Erase FRP And Wipe
Software version: 7.5


Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM77
Port: USB\VID_1782&PID_4D00\6&298C69D9&0&1
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: skip(6)
Connecting to device... OK
Selected processor: SC9863A
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 0959837464002167
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : Infinix
Product Manufacturer : INFINIX
Product Model : Infinix X6516
Product Name : X6516-GL
Product Device : Infinix-X6516
Product Board : X6516
Board Platform : sp9863a
Build ID : SP1A.210812.001
Build Date : Wed May 8 21:37:39 CST 2024
Display ID : X6516-SE668SABCD-SGo-GL-240508V748
Security Patch : 2024-05-05
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : 240508V748
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Creating default filesystems... [CACHE: EXT4] ... [USERDATA: F2FS] ... OK
Done!

 

[Abdul Malik]

Selected model: ZTE P963F61 (ZTE Blade A52)
Operation: Erase FRP
Software version: 7.5
Work ID: 47853094

Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM78
Port: USB\VID_1782&PID_4D00\6&437997&0&4
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: skip(6)
Connecting to device... OK
Selected processor: SC9863A
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 5032397602070814
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : ZTE
Product Manufacturer : ZTE
Product Model : ZTE Blade A54
Product Name : P963F64
Product Device : P963F64
Product Board : s9863a1h10
Board Platform : sp9863a
Build ID : TP1A.220624.014
Build Date : Mon Oct 16 15:21:21 CST 2023
Display ID : MyOS13.0.1_A54_AS
Security Patch : 2023-09-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 20231016.135247
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Done!

 

[iph0ne7]

Realme RMX3834 Realme Note 50 unlock done

Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM98
Port: USB\VID_1782&PID_4D00\6&320FE860&0&1
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T616_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Flash Type: EMMC
Reading lock data... [0,0] ... OK
Unlocking ... OK
Done!


Selected model: Realme RMX3834 (Realme Note 50)
Operation: Unlock Regional Lock
Software version: 7.6

 

[Abdul Malik]

Xiaomi Redmi Note 11 5g (chinese to indian variantl) Xiaomi Redmi Note 11T
Succeful with Pandora Tool 7.6
Firmware read, Write, Mi account Remove, Bootloader Unlock Success.

full video guide & firmware is here

firmware write logs

Selected model: Xiaomi Redmi Note 11 5G (China) (Evergo)
Operation: Flash (Download only)
Software version: 7.6
Work ID: 48947125

Parse scatter file... OK
Load Rom Images... OK
Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM25 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM25 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xDE371001, 0x5CE7702B, 0x30018FD4, 0x10C0CABD
Get Chip ID... [MT6833]
Get SOC ID... [454FCD27853270C455CDC14285ADE9208E30123AA3FB337E38C1BB51963B0AF8]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [14]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
UFS CID (FW VER): H9HQ15AECMBDAR (A043)
Load EMI config from preloader... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : H9HQ15AECMBDAR
UFS_FWVER : A043
BLOCK_SIZE: 0x0000001000 (4.00Kb)
UFS_LU0 : 0x0000400000 (4.00Mb)
UFS_LU1 : 0x0000400000 (4.00Mb)
UFS_LU2 : 0x1DCB000000 (119.17Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Get scatter info... OK
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : Redmi
Product Manufacturer : Xiaomi
Product Model : evergo
Product Name : evergo
Product Device : evergo
Product Board : evergo
Board Platform : mt6833
Build ID : SP1A.210812.016
Build Date : Tue Feb 6 05:43:48 UTC 2024
Display ID : TP1A.220624.014
Security Patch : 2024-02-01
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : V816.0.1.0.TGBCNXM
Userdata FS Type : F2FS
Get scatter info... OK
Verify scatter file... OK
Do NAND BMT remark... OK
Setup download info... OK
Get partition table catagory... OK [GPT]
Read mirror partition table... OK
Checking partition table layout changed... OK
Read major partition table... OK
Checking major partition table layout changed... OK
Download "preloader"... OK "preloder_backup"... OK
Download "cust"... OK
Download "rescue"... OK
Download "vbmeta_a"... OK
Download "vbmeta_system_a"... OK
Download "vbmeta_vendor_a"... OK
Download "md1img_a"... OK
Download "spmfw_a"... OK
Download "pi_img_a"... OK
Download "dpm_a"... OK
Download "scp_a"... OK
Download "sspm_a"... OK
Download "mcupm_a"... OK
Download "gz_a"... OK
Download "boot_a"... OK
Download "dtbo_a"... OK
Download "tee_a"... OK
Download "logo_a"... OK
Download "logo_b"... OK
Download "super"... OK
Download "userdata"... OK
Flashing done!

 

[iph0ne7]

Vivo V2026 (Vivo Y12S)
Operation: Erase FRP

Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM5 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x8932A28A, 0x0D9F4841, 0x2F7188A8, 0xED4FAE31
Load DownloadAgent... OK
Search DA... OK [2]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [7]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DX68MB
EMMC_ID : 0x150100445836384D42095AECDC47B7B3
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x00C0000000 (3.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 50% - 60% device life time used
DeviceLifeTimeEstB: 50% - 60% device life time used
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : vivo
Product Manufacturer : vivo
Product Model : V2026
Product Name : 2026
Product Device : 2026
Product Board : k65v1_64_bsp
Board Platform : mt6765
Build ID : RP1A.200720.012
Build Date : Mon Oct 21 18:12:11 CST 2024
Display ID : RP1A.200720.012 release-keys
Security Patch : 2023-05-01
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : eng.compil.20241021.181531
Userdata FS Type : EXT4
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Vivo_V2026%20(Vivo%20Y12S)/FRP_BACKUP_(2024-11-11_20-24-20)/
Format FRP... [P1] OK
Writting FRP data... OK
Erase FRP done!


Selected model: Vivo V2026 (Vivo Y12S)
Operation: Erase FRP
Software version: 7.6

 

[Abdul Malik]

Selected model: Samsung SM-A025F (Galaxy A02s)
Operation: Erase FRP
Software version: 7.7
BIT7 or less is supported by EDL loader
Work ID: 50363065

Waiting for device... OK
Device found at COM87
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 4222818292
Sahara ver: 2
OEM PK HASH: C8C8DD565BF1D8407777A58F8A8E580E00207116E0222C9AB19F3E1F88599034
CPU: SDM450 (Snapdragon 450)
Vendor: Samsung
MSM HW ID: 0009A0E100200000
SBL SW Ver: 00000000
Prepare loader file... OK
Loader hash: 9AC5C94FD3E9EB853E738298E707053976E68C19
Loader PK hash: C8C8DD565BF1D8407777A58F8A8E580E00207116E0222C9AB19F3E1F88599034
Loader version: 3.21
Sending loader... OK
FireHose initialization... OK
Detecting memory type... OK [EMMC]
Get storage info... OK
Storage info:
Type: EMMC
Name: RP64MB
Page size: 200
Block size: 200
Partition count: 3
PART0 size: 0x0E8F800000
PART1 size: 0x0000400000
PART2 size: 0x0000400000
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... OK
Serial Number : R9YR401B5BJ
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-A025F
Product Name : a02qnnxx
Product Device : a02q
Product Board : QC_Reference_Phone
Board Platform : msm8953
Build ID : SP1A.210812.016
Build Date : Fri Sep 30 19:42:56 KST 2022
Display ID : SP1A.210812.016.A025FXXU4CVJ1
Security Patch : 2022-06-01
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : A025FXXU4CVJ1
Userdata FS Type : F2FS
Erase FRP... OK
Done!

 

[iph0ne7]

Doogee S55 Lite
Operation: Erase FRP

Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM39 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0699
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6739]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xE93690CA, 0x6279C4E8, 0x93D98FD8, 0x62FB8EAD
Get Chip ID... [MT6739]
Get SOC ID... [9D43DA4EE1E825D744E006A83E872730A673E77E3F027689E9E973CB8C989574]
Get sec config... OK [00000000]
Load DownloadAgent... OK
Search DA... OK [1]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x880103443939313647236609012285A3
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: D9916G
EMMC_ID : 0x880103443939313647236609012285A3
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x039D000000 (14.45Gb)
RAM INFO:
INT_SRAM: 0x0000020000 (128.00Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 20% - 30% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : DOOGEE
Product Manufacturer : DOOGEE
Product Model : S55_Lite
Product Name : S55_Lite
Product Device : S55_Lite
Product Board : k39tv1_64_bsp
Board Platform : mt6739
Build ID : O11019
Build Date : 2018年 12月 21日 星期五 12:11:19 CST
Display ID : DOOGEE-S55_Lite-Android8.1-20181221
Security Patch : 2018-11-05
Version SDK : 27
Version Release : 8.1.0
Version Codename : REL
Firmware Version : 1532171011
Userdata FS Type : EXT4
Read partition "frp"... OK
Format FRP... [P1] OK
Writting FRP data... OK
Erase FRP done!


Selected model: Doogee S55 Lite
Operation: Erase FRP
Software version: 7.7
Work ID: 50580050

 

[iph0ne7]

DOOGEE-S55
Frp Reset Done


Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM39 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0326
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CB00, SW VER: 0001, HW SUB CODE: 8A00
Detect chip [MT6755]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x7466C14F, 0xBF12B78C, 0x3E335F7D, 0x4BC67CEB
Get Chip ID... [MT6750]
Get sec config... OK [00000000]
Modem count: 6
Load DownloadAgent... OK
Search DA... OK [2]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x8801034E436172642023DE088052C5AB
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: NCard
EMMC_ID : 0x8801034E436172642023DE088052C5AB
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0E67800000 (57.62Gb)
RAM INFO:
INT_SRAM: 0x0000038000 (224.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 10% - 20% device life time used
Checking USB status... USB_FULL_SPEED
Switching to USB high speed... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek DA USB VCOM (Android),usb2ser.sys,3.0.1504.0]
High Speed USB detected at COM36
Open port... OK
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : DOOGEE
Product Manufacturer : DOOGEE
Product Model : S55
Product Name : S55
Product Device : S55
Product Board : k50v1_64
Board Platform : mt6750
Build ID : O00623
Build Date : 2019年 11月 08日 星期五 19:08:48 CST
Display ID : DOOGEE-S55-Android8.0-20191108
Security Patch : 2019-10-05
Version SDK : 26
Version Release : 8.0.0
Version Codename : REL
Firmware Version : 1573208580
Userdata FS Type : EXT4
Read partition "frp"... OK
Format FRP... [P1] OK
Writting FRP data... OK
Erase FRP done!