Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM16)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 2.
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 02
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 10:00:00:00:00:00:00:00
EMMC CID: 13014E51324A39 : 000000000000000000
EMMC UA SIZE: 0x3ab400000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac000000 [14.688 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
-Reading GPT Drive OK
Build ID: O00623
Display ID: 00WW_3_31C
Version: 8.0.0
Build Date: Fri Jun 8 19:03:39 CST 2018
Model: 00WW
Brand: Unknown
Device: Unknown
Manufacturer: alps
Mediatek Version Release: alps-mp-o0.mp1-V3.47_k37mv1.64_P5
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start procesing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start procesing nvram
IMEI[1] from NVRAM: 356049087600406
IMEI[2] from NVRAM: 356049087600414
Start procesing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start procesing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start procesing lk ......
Start processing boot
Start processing recovery
Start procesing logo ......
Start procesing secro
Reading: BEGIN: 0x5200000 - LEN: 0x600000
Start procesing trustzone
Start procesing box ......
Reading: BEGIN: 0x6a00000 - LEN: 0x800000
Start procesing sys_info ......
Reading: BEGIN: 0x7200000 - LEN: 0x100000
Start procesing sutinfo ......
Reading: BEGIN: 0x7300000 - LEN: 0x20000
Start procesing hidden ......
Reading: BEGIN: 0x7320000 - LEN: 0x2000000
Start procesing cda ......
Reading: BEGIN: 0x9320000 - LEN: 0x800000
Start procesing frp ......
Reading: BEGIN: 0x9b20000 - LEN: 0x100000
Start procesing nvdata ......
Reading: BEGIN: 0x9c20000 - LEN: 0x2000000
Start procesing system
Reading: BEGIN: 0xe000000 - LEN: 0x100000000
Saved to : C:\Users\Hamza\Documents\Android_MTK\firmware_backup\MT6737M_EMMC_Unknown_00WW_8_0_0_alps-mp-o0_mp1-V3_47_k37mv1_64_P5(2018_08_03_07_06)
Wait untill phone will start charging.
All done.
Action : Format UserData.
Selected 0-By CPU:MT6571_EMMC
Exe version: Avengers Box MTK 0.4.9
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM40)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 1.
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (28Gb+4096Mb) KSI 0x4d4d43303447
EMMC FW VERSION: 58:00:00:00:00:00:00:00
EMMC CID: 7001004D4D4330 : 000000000000000000
EMMC UA SIZE: 0xe6800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe6c20000 [3.606 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting format adress....wait!
Starting generic userdata format...!
Partition: CACHE begin: 0x2cb40000 length: 0x1400000
Partition: USRDATA begin: 0x2df40000 length: 0xb77e0000
Phone can start slow at first power on
If phone stuck on logo, perform wipe from recovery.
First start can take up to 5 min on some phones.
Wait untill phone will start charging.
All done.
Flash files count is :11
Action : Firmware update.
Selected Model: 0-By CPU: MT6571_EMMC
Exe version: Avengers Box MTK 0.4.9
Scenario: [0]Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM9)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 1.
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A48384731 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Preloader saved in firmware directory.
Starting flash.
Download firmware to flash now...
Wait untill phone will start charging.
All done.
Action : Format UserData.
Selected 0-By CPU:MT6571_EMMC
Exe version: Avengers Box MTK 0.4.9
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM9)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 2.
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) HYNIX 0x484147346132
EMMC FW VERSION: a5:00:00:00:00:00:00:00
EMMC CID: 90014A48414734 : 000000000000000000
EMMC UA SIZE: 0x3ab400000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac000000 [14.688 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
-Reading GPT Drive OK
Detecting format adress....wait!
Starting generic userdata format...!
Partition: cache begin: 0xde800000 length: 0x19000000
Partition: userdata begin: 0xf7800000 length: 0x2b0080000
Phone can start slow at first power on
If phone stuck on logo, perform wipe from recovery.
First start can take up to 5 min on some phones.
Wait untill phone will start charging.
All done.
Action : Format UserData.
Selected 0-By CPU:MT6571_EMMC
Exe version: Avengers Box MTK 0.4.9
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM16)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 1.
----------------------------------------------------
BaseBand CPU :MT6589
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (28Gb+4096Mb) HYNIX 0x483447316404
EMMC FW VERSION: 86:00:00:00:00:00:00:00
EMMC CID: 90014A48344731 : 000000000000000000
EMMC UA SIZE: 0xe7000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe7600000 [3.615 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting format adress....wait!
Starting generic userdata format...!
Partition: CACHE begin: 0x32f00000 length: 0x7e00000
Partition: USRDATA begin: 0x3ad00000 length: 0xab400000
Phone can start slow at first power on
If phone stuck on logo, perform wipe from recovery.
First start can take up to 5 min on some phones.
Wait untill phone will start charging.
All done.
Action : Format UserData.
Selected 0-By CPU:MT6571_EMMC
Exe version: Avengers Box MTK 0.4.9
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM9)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 2.
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) HYNIX 0x484147346132
EMMC FW VERSION: a5:00:00:00:00:00:00:00
EMMC CID: 90014A48414734 : 000000000000000000
EMMC UA SIZE: 0x3ab400000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac000000 [14.688 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
-Reading GPT Drive OK
Detecting format adress....wait!
Starting generic userdata format...!
Partition: cache begin: 0xde800000 length: 0x19000000
Partition: userdata begin: 0xf7800000 length: 0x2b0080000
Phone can start slow at first power on
If phone stuck on logo, perform wipe from recovery.
First start can take up to 5 min on some phones.
Wait untill phone will start charging.
All done.
Selected connection metod: Meta Connection
Exe version: Avengers Box MTK 0.4.9
Selected phone: MT6571_EMMC
Action : IMEI REPAIR.
IMEI[1] for write : 353456789123459
IMEI[2] for write : 353456789012348
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[9]Detected: PreLoader USB VCOM Port (COM9)
\\?\usb#vid_0e8d&pid_2000#6&3aa03edd&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[204]META Port Detected: Gadget CDC VCOM Driver (COM204)
USB\VID_0E8D&PID_2007\6&3AA03EDD&0&2
Start sync target, waiting responce.....
[AP]BaseBand CPU : MT6582,S01
[META]BaseBand CPU : MT6582, E01
[META]SW_VER : MOLY.WR8.W1315.MD.WG.MP.V34
[META]HW_VER : TINNO82_WET_KK_HSPA_HW
Meta mode conected ok, start reading phone....
IMEI to repair: [1] 353456789123459
Phone imei[1] : 353456789123459
IMEI to repair: [2] 353456789012348
Phone imei[2] : 353456789012348
Clean Boot flag ok.
All done.
Phone must be on, USB debugging must be enabled.
If Phone ask,accept authorization on screen.
Found Device:ZY224N947J
Model: Moto E (4)
Platform Id: msm8937
OS Version: 7.1.1
Build Id: NDQS26.69-64-8
Build version: NDQS26.69-64-8
(GSM)RIL VERSION: Qualcomm RIL 1.0
Resetting FRP, wait....
Reset Done.
Flash files count is :12
Action : Firmware update.
Selected Model: 0-By CPU: MT6571_EMMC
Exe version: Avengers Box MTK 0.4.9
Scenario: [0]Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM9)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 1.
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 10:00:00:00:00:00:00:00
EMMC CID: F4012242697769 : 000000000000000000
EMMC UA SIZE: 0x1cd000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1cdc00000 [7.215 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Preloader saved in firmware directory.
Starting flash.
Download firmware to flash now...
Wait untill phone will start charging.
All done.
Exe version: Avengers Box MTK 0.4.9
Selected model: MT6571_EMMC
Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM16)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 1.
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (116Gb+8192Mb) SAMSUNG 0x464536324d42
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 15010046453632 : 000000000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
-Reading GPT Drive OK
Checking data, wait...
Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.